Official Software
Get notified when we add a new HyundaiOther Model Manual

We cover 60 Hyundai vehicles, were you looking for one of these?

Hyundai Sonata Workshop Manual (V6-3.3L (2006))
Hyundai Tucson Workshop Manual (V6-2.7L (2005))
Hyundai Genesis Sedan Workshop Manual (V6-3.8L (2009))
Hyundai - Auto - hyundai-i30-2018-104421
Hyundai - Auto - hyundai-elantra-2017-90005
Hyundai Tucson Awd Workshop Manual (L4-2.0L (2007))
Hyundai - Accent - Wiring Diagram - 2010 - 2010
Hyundai Azera Workshop Manual (V6-3.3L (2007))
Hyundai - Accent - Workshop Manual - 1997 - 1997
Hyundai - Auto - hyundai-i30-2012-79041
Hyundai - Auto - hyundai-i40-2016-93050
Hyundai - Auto - hyundai-ix35-2014-owner-s-manual-101133
Hyundai - Auto - hyundai-elantra-2013-101020
Hyundai Tiburon Workshop Manual (V6-2.7L (2004))
Hyundai Sonata Workshop Manual (V6-2.7L (2004))
Hyundai Genesis Coupe Workshop Manual (L4-2.0L Turbo (2010))
Hyundai - ix35 - Workshop Manual - 2010 - 2010
Hyundai - Santa Fe - Workshop Manual - (2009)
Hyundai Elantra Workshop Manual (L4-2.0L (2004))
Hyundai - Santa Fe - Workshop Manual - (2003)
1999-05--Hyundai--Sonata--4 Cylinders 2.4L FI DOHC--32577401
Hyundai Tucson Fwd Workshop Manual (L4-2.0L (2007))
Hyundai Tucson Awd Workshop Manual (L4-2.4L (2010))
Hyundai Elantra Sedan Workshop Manual (L4-2.0L (1999))
Hyundai Elantra Gt Hatchback Workshop Manual (L4-2.0L (2002))
Hyundai Accent Workshop Manual (L4-1.6L (2003))
Hyundai Accent L Hatch Back Workshop Manual (L4-1495cc 1.5L SOHC MFI (2000))
Hyundai - Santa Fe - Workshop Manual - (2010)
Hyundai - Auto - hyundai-i10-2016-manual-del-propietario-93002
Hyundai Genesis Sedan Workshop Manual (V8-4.6L (2011))
Hyundai Veracruz Awd Workshop Manual (V6-3.8L (2007))
Hyundai - Auto - hyundai-i20-2016-manual-del-propietario-93003
Hyundai Hyundai Atos Hyundai Atos Owners Manual
Hyundai - Elantra - Wiring Diagram - 1992 - 2004
Hyundai Sonata Gls Workshop Manual (V6-2.7L (2002))
Hyundai - i10 - Owners Manual - 2011 - 2011
1999-05--Hyundai--Tiburon--4 Cylinders F 2.0L MFI DOHC--32630001
Hyundai - Auto - hyundai-genesis-2012-100647
Hyundai Tucson Fwd Workshop Manual (L4-2.4L (2011))
2006-2008--Hyundai--Accent--4 Cylinders C 1.6L MFI DOHC--33227401
Hyundai - i20 - Workshop Manual - 2009 - 2009
2006-2008--Hyundai--Sonata--4 Cylinders C 2.4L FI DOHC--33097601
1999-05--Hyundai--Elantra--4 Cylinders D 2.0L MFI DOHC--32922501
Hyundai Elantra Workshop Manual (L4-1595cc 1.6L DOHC (1993))
Hyundai Accent Workshop Manual (L4-1.5L SOHC Alpha Engine (1995))
1999-05--Hyundai--Sonata--6 Cylinders 2.5L MFI DOHC--32630102
Hyundai - Auto - hyundai-elantra-2014-84339
Hyundai Elantra Gls Sedan Workshop Manual (L4-1.8L (1997))
2006-2008--Hyundai--Elantra--4 Cylinders D 2.0L MFI DOHC--33051501
Hyundai Sonata Gls Workshop Manual (V6-2.5L (2000))
Hyundai Accent Gl Workshop Manual (L4-1.6L (2001))
1999-05--Hyundai--Sonata--4 Cylinders 2.4L FI DOHC--32530601
Hyundai - Auto - hyundai-genesis-2010-100649
1999-05--Hyundai--Accent--4 Cylinders 1.6L MFI DOHC--32629802
Hyundai Sonata Workshop Manual (L4-2.0L (1992))
1999-05--Hyundai--Elantra--4 Cylinders D 2.0L MFI DOHC--32865601
Hyundai Elantra Gls Wagon Workshop Manual (L4-2.0L (2000))
Hyundai Hyundai i30 Hyundai i30 2008 Workshop Manual Body Repair
Hyundai Veracruz Fwd Workshop Manual (V6-3.8L (2009))
Hyundai - Accent - Workshop Manual - 2002 - 2002
Summary of Content
OWNER'S MANUAL Operation Maintenance Specifications All information in this Owner's Manual is current at the time of publication. However, HYUNDAI reserves the right to make changes at any time so that our policy of continual product improvement may be carried out. This manual applies to all HYUNDAI models and includes descriptions and explanations of optional as well as standard equipment. As a result, you may find material in this manual that does not apply to your specific vehicle. CAUTION: MODIFICATIONS TO YOUR HYUNDAI SAFETY AND VEHICLE DAMAGE WARNING Your HYUNDAI should not be modified in any way. Such modifications may adversely affect the performance, safety or durability of your HYUNDAI and may, in addition, violate conditions of the limited warranties covering the vehicle. Certain modifications may also be in violation of regulations established by the U.S. Department of Transportation and other federal or state agencies. This manual includes information titled as DANGER, WARNING, CAUTION and NOTICE. These titles indicate the following: DANGER DANGER indicates a hazardous situation which, if not avoided, will result in death or serious injury. WARNING TWO-WAY RADIO INSTALLATION Your vehicle is equipped with a Tire Pressure Monitoring System, Passenger Occupant Classification System and other CAN bus systems. It is possible for an improperly installed/adjusted high powered two-way radio to adversely affect electronic systems. For this reason, we recommend that you carefully follow the radio manufacturer’s instructions if you choose to install one of these devices. WARNING indicates a hazardous situation which, if not avoided, could result in death or serious injury. CAUTION CAUTION indicates a hazardous situation which, if not avoided, could result in minor or moderate injury. NOTICE NOTICE indicates a situation which, if not avoided, could result in vehicle damage. F2 HYUNDAI VEHICLE OWNER PRIVACY POLICY Your Hyundai vehicle may be equipped with technologies and services that use information collected, generated, recorded or stored by the vehicle. Hyundai has created a Vehicle Owner Privacy Policy to explain how these technologies and services collect use and share this information. You may read our Vehicle Owner Privacy Policy on the Hyundaiusa.com website at: https://www.hyundaiusa.com/owner-privacy-policy.aspx If you would like to receive a hard copy of our Vehicle Owner Privacy Policy, please contact the Hyundai Customer Care Center at: Hyundai Customer Care P.O. Box 20850 Fountain Valley, CA 92728 800-633-5151 [email protected] Hyundai’s Customer Care Center representatives are available Monday through Friday, between the hours of 6:00 AM and 5:00 PM PST and Saturday between 6:30 AM and 3:00 PM PST (English). For Customer Care assistance in Spanish or Korean, representatives are available Monday through Friday between 6:30 AM and 3:00 PM PST. F3 INTRODUCTION Congratulations, and thank you for choosing HYUNDAI. We are pleased to welcome you to the growing number of discerning people who drive HYUNDAIs. We are very proud of the advanced engineering and high-quality construction of each HYUNDAI we build. Your Owner's Manual will introduce you to the features and operation of your new HYUNDAI. To become familiar with your new HYUNDAI, so that you can fully enjoy it, read this Owner's Manual carefully before driving your new vehicle. This manual contains important safety information and instructions intended to familiarize you with your vehicle's controls and safety features so you can safely operate your vehicle. This manual also contains information on maintenance designed to enhance safe operation of the vehicle. It is recommended that all service and maintenance on your car be performed by an authorized HYUNDAI dealer. HYUNDAI dealers are prepared to provide high-quality service, maintenance and any other assistance that may be required. This Owner's Manual should be considered a permanent part of your vehicle, and should be kept in the vehicle so you can refer to it at any time. The manual should stay with the vehicle if you sell it to provide the next owner with important operating, safety and maintenance information. HYUNDAI MOTOR AMERICA CAUTION Severe vehicle damage may result from the use of poor quality lubricants that do not meet HYUNDAI specifications.You must always use high quality lubricants that meet the specifications listed on Page 8-6 in the Vehicle Specifications section of the Owner's Manual. Copyright 2022 HYUNDAI Motor America. All rights reserved. No part of this publication may be reproduced, stored in any retrieval system or transmitted in any form or by any means without the prior written permission of HYUNDAI Motor America. F4 GUIDE TO HYUNDAI GENUINE PARTS 1. What are HYUNDAI Genuine Parts? HYUNDAI Genuine Parts are the same parts used by HYUNDAI Motor Company to manufacture vehicles. They are designed and tested for the optimum safety, performance, and reliability for our customers. 2. Why should you use genuine parts? HYUNDAI Genuine Parts are engineered and built to meet rigid manufacturing requirements. Damage caused by using imitation, counterfeit or used salvage parts is not covered under the HYUNDAI New Vehicle Limited Warranty or any other HYUNDAI warranty. In addition, any damage to or failure of HYUNDAI Genuine Parts caused by the installation or failure of an imitation, counterfeit or used salvage part is not covered by any HYUNDAI Warranty. 3. How can you tell if you are purchasing HYUNDAI Genuine Parts? Look for the HYUNDAI Genuine Parts Logo on the package (see below). HYUNDAI Genuine Parts exported to the U.S. are packaged with labels written only in English. HYUNDAI Genuine Parts are only sold through authorized HYUNDAI Dealerships. F5 Introduction HOW TO USE THIS MANUAL SAFETY MESSAGES We want to help you get the greatest possible driving pleasure from your vehicle. Your Owner's Manual can assist you in many ways. To gain an overview of the contents of your Owner's Manual, use the Table of Contents in the front of the manual. The first page of each Chapter includes a detailed Table of Contents of the topics in that Chapter. To quickly locate information about your vehicle, use the Index in the back of the manual. It is an alphabetical list of what is in this manual and the page number where it can be found. For your convenience, we have incorporated tabs on the right-hand page edges. These tabs are coded with the Chapter titles to assist you with navigating through the manual. Your safety, and the safety of others, is very important. This Owner's Manual provides you with many safety precautions and operating procedures. This information alerts you to potential hazards that may hurt you or others, as well as damage to your vehicle. Safety messages found on vehicle labels and in this manual describe these hazards and what to do to avoid or reduce the risks. Warnings and instructions contained in this manual are for your safety. Failure to follow safety warnings and instructions can lead to serious injury or death. Throughout this manual DANGER, WARNING, CAUTION, NOTICE and the SAFETY ALERT SYMBOL will be used. This is the safety alert symbol. It is used to alert you to potential physical injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death. The safety alert symbol precedes the signal words DANGER, WARNING and CAUTION. DANGER DANGER indicates a hazardous situation which, if not avoided, will result in death or serious injury. WARNING WARNING indicates a hazardous situation which, if not avoided, could result in death or serious injury. F6 Introduction CAUTION CAUTION indicates a hazardous situation which, if not avoided, could result in minor or moderate injury. NOTICE NOTICE indicates a situation which, if not avoided, could result in vehicle damage. FUEL REQUIREMENTS VEHICLE MODIFICATIONS For the optimal vehicle performance, we recommend you to use the hydrogen fuel which complies with your local regulatory agency standard (purity, maximum concentration of impurities, etc.). • This vehicle should not be modified. Modification of your vehicle could affect its performance, safety or durability and may even violate governmental safety and emissions regulations. In addition, damage or performance problems resulting from any modification may not be covered under warranty. • If you use unauthorized electronic devices, it may cause the vehicle to operate abnormally, wire damage, battery discharge and fire. For your safety, do not use unauthorized electronic devices. F7 Introduction VEHICLE DATA COLLECTION AND EVENT DATA RECORDERS WARNING CALIFORNIA PROPOSITION 65 WARNING Items contained in motor vehicles or emitted from them are known to the State of California to cause cancer and birth defects or reproductive harm. These include: • Gasoline and its vapors • Engine exhaust • Used engine oil • Interior passenger compartment components and materials • Component parts which are subject to heat and wear In addition, battery posts, terminals and related accessories contain lead, lead compounds and other chemicals known to the State of California to cause cancer and reproductive harm. F8 This vehicle is equipped with an event data recorder (EDR). The main purpose of an EDR is to record, in certain crash or near crash-like situations, such as an air bag deployment or hitting a road obstacle, data that will assist in understanding how a vehicle’s systems performed. The EDR is designed to record data related to vehicle dynamics and safety systems for a short period of time, typically 30 seconds or less. The EDR in this vehicle is designed to record such data as: • How various systems in your vehicle were operating; • Whether or not the driver and passenger safety belts were buckled/fastened; • How far (if at all) the driver was depressing the accelerator and/or brake pedal; and, • How fast the vehicle was traveling. These data can help provide a better understanding of the circumstances in which crashes and injuries occur. NOTE: EDR data are recorded by your vehicle only if a non-trivial crash situation occurs; no data are recorded by the EDR under normal driving conditions and no personal data (e.g., name, gender, age, and crash location) are recorded. However, other parties, such as law enforcement, could combine the EDR data with the type of personally identifying data routinely acquired during a crash investigation. To read data recorded by an EDR, special equipment is required, and access to the vehicle or the EDR is needed. In addition to the vehicle manufacturer, other parties, such as law enforcement, that have the special equipment, can read the information if they have access to the vehicle or the EDR. TABLE OF CONTENTS Your Vehicle at a Glance 1 Safety System of Your Vehicle 2 Convenience Features of Your Vehicle 3 Infotainment System 4 Driving Your Vehicle 5 What to Do in an Emergency 6 Maintenance 7 Specifications, Consumer Information and Reporting Safety Defects 8 Index I FCEV Vehicle System Overview FCEV : Fuel Cell Electric Vehicle Introduction of FCEV .........................................................H2 The components of FCEV..................................................H3 Fuel cell stack ...................................................................................H4 FCEV system module .......................................................................H4 High pressure hydrogen storage tanks......................................H5 Battery system..................................................................................H5 Features of FCEV .............................................................H10 How to Start the Vehicle..............................................................H10 How to Stop the Vehicle ..............................................................H11 Virtual Engine Sound System......................................................H11 Fuel filler door ................................................................................H12 Warning and indicator lights .......................................................H15 LCD Display Messages ..................................................................H16 FCEV mode.......................................................................................H21 When the high voltage battery is weak...................................H25 If the 12 volt battery is discharged...........................................H25 Emergency while driving ..............................................................H26 Customer Q&A Guide .......................................................H30 INTRODUCTION OF FCEV An FCEV is an electric vehicle which is driven using the electricity generated from the fuel cell. The power system of the FCEV is composed of the following: - The fuel cell stack which generates the electricity - The device which controls the heat generated after supplying the hydrogen and air for chemical reaction of the stack - The inverter which converts the DC created from the stack to AC - The traction motor which generates propelling power using the supplied AC - Air processing system - Fuel processing system The hydrogen tanks that stores the hydrogen supplied to the fuel cell can be fueled at 70 MPa. ❈ FCEV is Fuel Cell Electric Vehicle H2 THE COMPONENTS OF FCEV (1) Fuel Cell system (2) Traction motor system 1 2 3 4 (3) Hydrogen Tanks (4) Battery System OFEQ018001N/OFEQ018002/OFEQ018003/OFEQ018004/OFEQ018005 H3 THE COMPONENTS OF FCEV (CONT.) 1. Fuel cell stack 2. FCEV powertrain OFEQ018006N A fuel cell stack is a device that converts the chemical energy into electricity thorough a chemical reaction with hydrogen and oxygen. Fuel cell is different from battery in that it requires hydrogen and oxygen constantly in order to operate. And it can produce electricity continually for as long as hydrogen and oxygen are supplied. A fuel cell stack is composed of many unit cells to obtain the desired power for a vehicle. 4. Reduction gear 5. Air compressor OFEQ018007N WARNING OFEQ018008 1. High voltage junction box 2. Fuel cell stack 3. Traction motor H4 The main components of FCEV are Fuel cell stack, air processing system, fuel processing system, thermal management system, hydrogen storage tanks, high voltage battery, DCDC converter, inverter and traction motor, gear differential unit. The Air compressor supplies air to fuel cell system and the hydrogen storage tanks supplies hydrogen fuel to fuel cell system. Then the electric energy comes from the fuel cell system. The electric energy delivered to the motor inverter. The energy finally moves to motor operating. If you assemble or disassemble the stack and fuel cell system, hydrogen may leak resulting in fire and this may lead to accidents. Never assemble or disassemble the stack and fuel cell system. 3. High pressure hydrogen storage tanks High voltage cables 4. Battery system The electric energy which is generated from fuel cell system or high voltage battery module is distributed to the various components. Most of the cables are located in the inside or bottom of the components. These cables use orange colored cover to distinguish from other lines. It is required to handle the cables carefully with isolation gloves. OFEQ018005 OFEQ018004 Compressed hydrogen tank system is composed of three tanks which are filled with hydrogen gas in a gas station. Each tank is made of plastic liner for blocking the hydrogen permeation and carbon fiber layer sustain high pressures. There are main parts to supply hydrogen stably and to enable safety such as magnetic valves, pressure regulator, pressure sensors, pressure relief valve, excess flow valve and so on. The hydrogen in the tanks comes into the pressure regulator which has a pressure sensor. A 12 V battery integrated with the low and high voltage batteries is installed in the vehicle. The battery supplies the electricity required for driving the vehicle and stores the energy generated from the regenerative braking. When the vehicle accelerates the auxiliary power of the fuel cell supplies the energy. The vehicle can drive about 2 miles (3 km) in EV mode until the high voltage battery is discharged. H5 THE COMPONENTS OF FCEV (CONT.) Disconnecting negative (-) battery cable OFEQ018009 1. Fold up the luggage board of the liftgate. 2. Disconnect the negative (-) connector. H6 Hydrogen gas detection sensors They detect a hydrogen leak and informs a warning of hydrogen leak to a driver. As informing a warning, the sensors automatically shut off hydrogen. Sensors are installed around the hydrogen storage tanks and FCEV system module. These sensors prevent a hydrogen leak in an emergency. Even if the hydrogen leak occurs, the Fuel cell electric operating does not active. The system operating is changed to EV (Electric vehicle) mode and you may drive the vehicle about 2 miles (3 km). However, we recommend that you stop the vehicle to the safety place and contact an authorized HYUNDAI dealer. WARNING Never touch orange or high voltage labeled components including wires, cables, and connections. If the insulators or covers are damaged or removed, severe injury or death from electrocution may occur. WARNING In the fuel cell system, the battery uses high voltage to operate the motor and other components. This high voltage battery system can be very dangerous. Never touch the system. If you touch the battery system, serious injury or death may occur. WARNING OFEQ018010 WARNING • Do not disassemble or assemble the high voltage battery system. Doing so may result in electric shock causing death or serious injury. • If you disassemble or assemble system components improperly, it may damage the performance and reliability of your vehicle. • If coolant and electrolyte come in contact with your body, clothes or eyes, immediately flush with a large quantity of fresh tap water. Have your eyes examined by a doctor as soon as possible. Never assemble or disassemble the high voltage battery system. • If you assemble or disassemble the high voltage battery system, the durability and performance of the vehicle may be damaged. • When you want to check the high voltage battery system, contact an authorized HYUNDAI dealer. • Do not touch the high voltage battery and high voltage cable connected to motor (orange color). Severe burns and electric shock may occur. For your safety, do not touch the cover of electronic components and electronic cable. Do not remove the cover of electronic components and electronic cable. In particular, never touch the high voltage battery system when the FCEV system is operating. It may result in death or serious injury. WARNING • Never use the package modules (high voltage battery, inverter, converter) for any other purpose. • Do not use an after-market battery charger to charge the high voltage battery. Doing so may result in death or serious injury. • Never get near or put a high voltage battery system in a fire. Doing so may result in serious burns. • Never drill into, strike or otherwise damage the package modules. An electric shock may occur resulting in serious injury or death. H7 THE COMPONENTS OF FCEV (CONT.) CAUTION • When the vehicle is paint baked, do not pass 30 minutes in 158°F (70°C) or 20 minutes in 176°F (80°C) degree. • When you clean the fuel cell power module compartment, do not wash using water. Water may cause an electric shock to occur and damage electronic parts and components. WARNING This vehicle uses the high voltage battery system to generate high voltage. High voltage in the battery system is very dangerous and can cause severe burns and electric shock. This may result in serious injury or death. H8 • For your safety, never touch, replace, dismantle or remove the high voltage battery system including components, cables and connectors. Severe burns or electric shock may result in serious injury or death if you do not follow this warning. • When the high voltage battery system operates, the battery system can be hot. Always be careful because burns or electric shock may be caused by high voltage. • Do not drop water or liquid on to Fuel cell power module compartment. The system components are covered. If you drop water or liquid on to system components, it may result in electric shock. WARNING • Do not assemble or disassemble the hydrogen tanks. Improper work may damage the performance and reliability and unexpected problem may occur. For hydrogen tanks work, contact an authorized HYUNDAI dealer. • Never drill into, strike or otherwise damage the hydrogen tanks. Unexpected problem may occur resulting in serious injury and death. • Never get near or put a hydrogen tanks in a fire. Doing so may result in big injury. • Never use the hydrogen tank for any other purpose. Service plug CAUTION OFEQ018011 WARNING Never touch the service plug under the rear seat. The service plug is attached to the high voltage battery system. Touching the service plug will result in death or serious injury. Service personnel should follow procedures in service manual. The FCEV system contains many electronic components. High voltage components like cables and other parts may emit electromagnetic waves. Even if the electromagnetic cover blocks electromagnetic emissions, electromagnetic waves may have an effect on electronic appliances. If you park the vehicle for a long time, the high voltage battery or 12V battery will discharge.You need to drive the vehicle several times per month. We recommend driving at least 10 minutes or 2 miles (3 km) when you drive the vehicle. If the high voltage battery is discharged and if it is impossible to jump start the vehicle contact your HYUNDAI dealer. WARNING • When you start the FCEV system in the "P" or "N" gear position, the "Ready ( )" indicator is illuminated in the cluster. The driver can drive the vehicle. • When you leave the vehicle, you should turn off the system or shift into the "P" position. If you depress the accelerator pedal by mistake and the vehicle is not in the "P" position, the vehicle will move abruptly. This may result in serious injury or death. H9 FEATURES OF FCEV i Information How to Start the Vehicle 1. Holding the smart key, sit in the driver's seat. 2. Fasten the seat belt before starting the vehicle. 3. Make sure to engage the parking brake. 4. Turn OFF all electrical devices. 5. Make sure to depress and hold the brake pedal. 6. While depressing the brake pedal, shift to P (Park). 7. Depress and hold the brake pedal while pressing the POWER button. H10 While the charging cable is connected, the gear cannot be shift from P (Park) to any other gear for safety reasons. 10. Release the parking brake and slowly release the brake pedal. Check if the vehicle slowly moves forward, then depress the accelerator pedal. OFE051462N 8. When the " " indicator is ON, you can drive the vehicle. When the " " indicator is OFF, you cannot drive the vehicle. Start the vehicle again. 9. Depress and hold the brake pedal and shift to the desired position. How to Stop the Vehicle Virtual Engine Sound System 1. Hold down the brake pedal while the vehicle is parked. 2. While depressing the brake pedal, shift to P (Park). 3. While depressing the brake pedal, engage the parking brake. 4. While depressing the brake pedal, press the Power button and turn off the vehicle. 5. Check if the " " indicator is turned OFF on the instrument cluster. When the " " indicator is ON and the gear is in a position other than P (Park), the driver can accidently depress the accelerator pedal, causing the vehicle to move unexpectedly. The Virtual Engine Sound System generates engine sound for pedestrians to hear vehicle sound because there is no sound while the FCEV vehicle is operating. • If the vehicle is in the ready ( ) mode and the gear is not in P (Park), • When the gear is shifted to R (Reverse), an additional warning sound will be heard. CAUTION • The vehicle is much quieter while driving than a conventional gasoline-powered vehicle. Be aware of your surroundings and always drive safely. • After you park the vehicle or while you are waiting at a traffic light, check whether there are children or obstacles around the vehicle. • Check if there is something behind the vehicle when driving in reverse. Pedestrians may not hear the sound of the vehicle. H11 FEATURES OF FCEV (CONT.) Fuel filler door Opening the fuel filler door OFE039063L 1. Turn the vehicle off. 2. Push the fuel filler door opener button. H12 NOTICE • The fuel filler door does not open if the vehicle is not off. • The fuel filler door may open after several seconds from turning off the vehicle. However, in cold weather, the fuel door may not open for about 45 seconds until the cluster message "Powering down..." disappears. This is for protecting the fuel cell system. OFEQ018015N 3. Pull the fuel filler door (1) out to fully open. 4. Pull the fuel filler cap (2). 5. Place the cap on the fuel filler door. i Information If the fuel filler door does not open because ice has formed around it, tap lightly or push on the door to break the ice and release the door. Do not pry on the door. If necessary, spray around the door with an approved deicer fluid (do not use radiator antifreeze) or move the vehicle to a warm place and allow the ice to melt. WARNING • According to the hydrogen fueling station condition the hydrogen may not be filled fully and the driving distance may change accordingly. The hydrogen may not be charged fully if the fueling station does not satisfy the fueling method specified in the fueling. standard (SAE J2601) or if the hydrogen is not enough in the station, the fueling facility has failure, etc. • Depending on the remaining hydrogen in the vehicle and ambient temperature, the time required for fueling may vary. More time may be required for fueling if the remaining hydrogen level is low and the weather is hot. Also, required time may be longer if the hydrogen cooling temperature of the fueling station is high. • The distance to empty may vary depending on the driving environment (weather, traffic, etc.) and driving method (rapid acceleration, heating and air conditioning, etc.). Closing the fuel filler door 1. Cover the fuel filler with the cap. 2. Close the fuel filler door until it is latched securely. WARNING • If the fuel filler cap requires replacement, use parts for replacement from an authorized Hyundai dealer. An incorrect fuel filler cap can result in a serious malfunction of the fuel system. Contact an authorized HYUNDAI dealer for replacement. • If the fuel filler door is not completely closed, the vehicle is not turned on. Close the fuel filler door and turn on the vehicle. H13 FEATURES OF FCEV (CONT.) WARNING Refueling dangers Automotive fuels are flammable materials. When refueling, please note the following guidelines carefully. Failure to follow these guidelines may result in severe personal injury, severe burns or death by fire or explosion. • Read and follow all warning posted at the gas station facility. • Before touching the fuel nozzle, you should eliminate potentially dangerous static electricity discharge by touching another metal part of the vehicle, a safe distance away from the fuel filler neck, nozzle, or other gas source. H14 • Do not get back into a vehicle • When refueling, always shut once you have begun refueling since you can generate static electricity by touching, rubbing or sliding against any item or fabric (polyester, satin, nylon, etc.) capable of producing static electricity. Static electricity discharge can ignite fuel vapors resulting in rapid burning. If you must reenter the vehicle, you should once again eliminate potentially dangerous static electricity discharge by touching a metal part of the vehicle, away from the fuel filler neck, nozzle or other gasoline source. • Do not use cellular phones while refueling. Electric current and/or electronic interference from cellular phones can potentially ignite fuel vapors causing a fire. the power off. Once refueling is complete, check to make sure the fuel filler cap and fuel filler door are securely closed, before starting the vehicle. • DO NOT use matches or a lighter and DO NOT SMOKE or leave a lit cigarette in your vehicle while at a gas station especially during refueling. Automotive fuel is highly flammable and can, when ignited, result in fire. • If a fire breaks out during refueling, leave the vicinity of the vehicle, and immediately contact the manager of the gas station and then contact the local fire department. Follow any safety instructions they provide. Warning and indicator lights 1. Power gauge 2. Speedometer 3. Fuel cell stack temperature gauge 4. Fuel gauge 5. Warning and indicator lights 6. Odometer/LCD display/Trip computer OFE041480N Yellow Air bag warning Charging system warning Electronic Stability Control (ESC) OFF indicator Seat belt warning Low fuel level warning Immobilizer Indicator Parking brake & brake fluid warning Low tire pressure warning Turn Signal Indicator EPB (EPB) warning Regenerative brake warning Service warning High Beam Indicator AUTO AUTO HOLD Indicator HOLD Anti-lock brake system (ABS) warning Power down warning Light ON Indicator Master Warning Hydrogen gas leak warning (Red) Ready indicator LED Headlight warning Hydrogen leak sensor warning (Yellow) Lane Keeping Assist (LKA) system indicator Electronic Brake force Distribution (EBD) warning Electric Power Steering (EPS) warning Forward CollisionAvoidance Assist (FCA) system warning Electronic Parking Brake Electronic Stability Control (ESC) indicator ❈ For more details, refer to the ‘Instrument cluster’ in Chapter 3. H15 FEATURES OF FCEV (CONT.) CAUTION ▲ Check FCEV System This warning message is displayed and the warning light illuminates when the FCEV system is not working properly. In this case,have the vehicle checked by an authorized HYUNDAI dealer. Replace fuel cell coolant and filter This warning message is displayed when the fuel cell coolant and filter need to be checked. In this case, have the vehicle checked by an authorized HYUNDAI dealer. Refill electric components coolant This warning message is displayed when the electronic device's coolant level in the tanks is low. In this case, have the vehicle checked by an authorized HYUNDAI dealer and refill the coolant. ▲ H16 ▲ ▲ Power limited due to high coolant temperature This warning message is displayed when the FCEV's stack is overheated and the power supply to the FCEV system is limited. If the warning light stays on when in "Ready ( )" state or while driving the vehicle, this indicates that the fuel cell stack may have failure. In this case, we recommend you to drive safely and have your vehicle inspected by an authorized HYUNDAI dealer. Do not drive on uphill or accelerate suddenly when the power down warning light is on. The power is limited and may result in dangerous situation or vehicle damage. ▲ LCD Display Messages Stop vehicle and check power supply This warning message is displayed when any serious malfunction of the vehicle is detected. In this case, drive the vehicle immediately to a safe area and turn off the vehicle. Then turn the vehicle on again. If the message is displayed again, have the vehicle checked by an authorized HYUNDAI dealer. Small hydrogen leak possible This warning message is displayed when the minor hydrogen leakage is detected in the vehicle. In this case, have the vehicle checked by an authorized HYUNDAI dealer. If the vehicle has to be stopped due to the leakage, hydrogen gas leak warning light (red) will illuminate and 'Hydrogen leak detected. Stop safely immediately.' message is displayed. ▲ ▲ Hydrogen tank temperature out of range! Stop safely immediately This warning message is displayed to protect the hydrogen tank system when the temperature of the hydrogen tank is too high or too low. Turn off the vehicle and stop to let the temperature of the hydrogen tank go down. WARNING ▲ Hydrogen tank overfilled due to hydrogen station error This warning message is displayed when the hydrogen tank is over-refueled with the hydrogen due to a problem of the fueling station. Turn off the vehicle and then turn on the vehicle. If the message is displayed again, have the vehicle checked by an authorized HYUNDAI dealer. ▲ ▲ Close fuel door before turning vehicle On This warning message is displayed when you turn on the vehicle with the fuel filler door open. Close the fuel filler door and turn on the vehicle again. Power limited due to low hydrogen tank temperature This warning message is displayed to protect the battery and fuel cell system when the temperature of the hydrogen tanks is low. If this message is still displayed after the ambient temperature has increased enough, have the vehicle checked by an authorized HYUNDAI dealer. If this message is still displayed after the vehicle is turned off and stopped for a sufficient time, we recommend you to stop driving and have your vehicle immediately inspected by an authorized HYUNDAI dealer. H17 FEATURES OF FCEV (CONT.) H18 Replace hydrogen tank. Maximum number of refill cycles exceeded This warning message is displayed when the number of times refueling the vehicle exceeds the predefined number (4,995 times). The fuel cell system stops operation for safety even if the vehicle is refueled enough and when there is no problem with the vehicle. In this case, have the hydrogen storage system replaced by an authorized HYUNDAI dealer. ▲ ▲ Refueling… This warning message is displayed while refueling the vehicle. Do not turn on the vehicle and wait until the refueling is complete. ▲ ▲ Open fuel door after turning vehicle Off This warning message is displayed when you try to open the fuel filler door while the vehicle is turned on. Turn of the vehicle and open the fuel filler door. If the message is still displayed after a while, have the vehicle checked by an authorized HYUNDAI dealer. ▲ ▲ Check fuel door sensor This warning message is displayed when there is a malfunction with the sensor located below the fueling inlet which is used for communicating with the fueling station. Check and remove if there is any foreign substance around the fueling inlet. If this message is still displayed after the foreign substance is removed, have the vehicle checked by an authorized HYUNDAI dealer. Check hydrogen leak sensor This warning message is displayed and the light showing the malfunction of the hydrogen leakage detection sensor illuminates when there is a malfunction with the hydrogen leakage detection sensor. In this case, have the vehicle checked by an authorized HYUNDAI dealer. ▲ Hydrogen leak detected. Stop safely immediately This warning message is displayed and the hydrogen gas leak warning light (red) illuminates when the hydrogen leakage is detected in the vehicle. In this case, we recommend you to stop driving and stop the vehicle immediately at a safe area. Then turn off the vehicle and have your vehicle inspected by an authorized HYUNDAI dealer. Power limited due to fuel cell system error This warning message is displayed when there is a malfunction with the fuel cell system and the power supply to the fuel cell system is limited. If the warning light stays on when in "Ready ( )" state or while driving the vehicle, this indicates that the fuel cell system may have failure. In this case, have the vehicle checked by an authorized HYUNDAI dealer. Check 12V battery. Stop safely and engage parking brake This warning message is displayed when the voltage of the auxiliary battery is low. Stop the vehicle at a safe area and turn off the vehicle. Then turn on the vehicle after a while. If the message is displayed again, have the vehicle checked by an authorized HYUNDAI dealer. ▲ Check FCEV System! Stop and turn vehicle Off This warning message is displayed when there is a temporary malfunction with the FCEV system. Stop the vehicle at a safe area and turn off the vehicle. Then turn on the vehicle after a while. If the message is displayed again, have the vehicle checked by an authorized HYUNDAI dealer. ▲ Unable to start vehicle. Hydrogen too low This warning message is displayed when the fuel is empty and the vehicle is not turned on. The vehicle will not turn on and we recommend that you have your vehicle inspected by an authorized HYUNDAI dealer. ▲ ▲ Unable to start vehicle! Check high voltage system This warning message is displayed when there is a malfunction with the high voltage system. If the vehicle will not turn on, have the vehicle checked by an authorized HYUNDAI dealer. ▲ ▲ Check fuel cell system! Stop safely immediately This warning message is displayed when any serious malfunction of the fuel cell system is detected. In this case, immediately park the vehicle at a safe area and turn off the vehicle. Then turn the vehicle on again. If the message is displayed again, have the vehicle checked by an authorized HYUNDAI dealer. Low fuel This warning message is displayed when you need to refuel the vehicle. Refuel the vehicle immediately at a nearby fueling station. H19 FEATURES OF FCEV (CONT.) ▲ Air filter blocked. Check filter or see owner's manual This warning message is displayed when - the snow may block the air cleaner filter after driving the vehicle in heavy snow when the ambient temperature is below 50°C (10°F) or - the exhaust pipe may be frozen and clogged when the vehicle is parked for a long time with the vehicle ON below 50°C (10°F). In this case, remove the snow from the inside of the air cleaner filter and turn on and off the vehicle. If the warning message is displayed again, the exhaust pipe may be blocked. Then, move your vehicle indoors and leave it inside more than one day to defrost the exhaust pipe. If the warning message is displayed again, have the vehicle checked by an authorized HYUNDAI dealer. H20 OFE078009 OFE078010 FCEV mode Entering FCEV Mode FCEV Mode Menu Screen OFEQ018017N OFEQ018018N If you select the "FCEV" menu in the Infotainment system home screen or the "FCEV" in the menu, you can enter the FCEV mode. For details on FCEV Mode, refer to the navigation manual that is provided separately. OFEQ018019N 1. Reachable Range: It shows the reachable range on the map. 2. Fuel cell monitoring: It shows the battery information and the power transmission flow between the components. 3. ECO Driving: It shows the fuel efficiency information and environmental contribution. 4. Management : It shows the status of hydrogen tank (warning alert) and 'FCEV Route' setting. H21 FEATURES OF FCEV (CONT.) Reachable Range Fuel cell monitoring OFEQ018020N You can check the reachable range on the screen H22 OFEQ018021L You can check the FCEV's Start-up status, battery information and power transmission flow between the components. Hydrogen fuel economy ECO contribution OFEQ018022L OFEQ018023N 1. Fuel Efficiency Graph: It shows fuel efficiency information of the last 45 minutes. 2. Average Fuel Efficiency (MPGe): It shows the average fuel efficiency. 3. Initialization: It initializes the fuel efficiency graph information. You can check the amount of purified air and CO2 reduction rate. - Air purification It shows the amount of air that adult(s) breathe(s) per day is purified - CO2 reduction It shows that the same amount of CO2 exhausted by an equal class gasoline vehicle is reduced. H23 FEATURES OF FCEV (CONT.) Management OFEQ018024N OFEQ018025N OFEQ018026N H24 1. Hydrogen Tank : It shows the temperature, pressure and status of the hydrogen tank while driving. 2. Warning [Destination unreachable warning] You can set to have the warning pop up when the vehicle cannot reach the destination with the current remaining hydrogen fuel. 3. FCEV Route [Display FCEV Route Bar on Map] You can set to indicate the FCEV route and reachable range on the map screen. When the high voltage battery is weak If the 12 volt battery is discharged When the high voltage battery is weak due to driving on a hill for a long time or accelerating and decelerating the vehicle repeatedly, the acceleration performance may be lower than usual. In this case, be cautious not to overtake other vehicles. This vehicle does not have a regular 12V battery that needs periodic replacement. It is lithium ion polymer type integrated into the high voltage battery. The vehicle has a 12V battery protection system that cuts 12V battery from vehicle draw to prevent full discharge. If the 12V battery is discharged, you should try charging it by pressing the "12V BATT RESET" button. Using the 12V battery reset switch OFEQ019028L 1. Press the 12V Battery Reset switch to reconnect the 12V battery. 2. Start the vehicle within 15 seconds of pressing the 12V Battery Reset switch. 3. After starting vehicle ( indicator on), move the vehicle outside and keep the vehicle ready ( ) mode more than 30 minutes safely to charge the 12V battery. H25 FEATURES OF FCEV (CONT.) If you do not start the vehicle immediately after pressing the 12V Battery Reset switch, the power of 12V battery is automatically disconnected after few seconds to save the 12V battery from additional discharge. If the 12V battery is disconnected prior to starting the vehicle, press the 12V Battery Reset switch again and then immediately start the vehicle as explained. Repeated use of the 12V Battery Reset switch without a sufficient ON cycle (30 Min+) may cause over discharge of the 12V battery, which will prevent the vehicle from starting. If the 12V battery is over discharged to a point that the reset does not work, try to jump-start the vehicle. H26 i Information After starting the vehicle ( indicator on), the 12V battery is being charged whether the accelerator pedal is depressed or not. ❈ For more details regarding the jump start, refer to the 'Jump staring' in Owner's manual Chapter 6. Emergency while driving If an accident occurs 1. Stop the vehicle, put the gear into the P (Park) position, set the parking brake, and turn the vehicle off to prevent the hydrogen and current from leaking. The flow of hydrogen into the fuel cell stack will be shut off to prevent the current from being generated. 2. Evacuate to the safety place. 3. Call emergency services for help and let them know the vehicle is a Fuel Cell Electric Vehicle. If a fire occurs 1. Stop the vehicle, put the gear into the P(Park) position, set the parking brake, and turn the vehicle off to prevent the hydrogen and current from leaking. The flow of hydrogen into the fuel cell stack will be shut off to prevent the current from being generated. 2. If the fire is small, which can be extinguished with fire extinguisher, use carbon dioxide extinguisher. You can also extinguish the fire with water when the vehicle power is turned off. WARNING Do not use water to extinguish a fire when the vehicle power is turned on. Serious electric shock may result. If the fire is too big to be extinguished with the fire extinguisher, evacuate from the vehicle, call the fire department, and let them know the vehicle is a Fuel Cell Electric Vehicle. Do not come close to the vehicle until the fire is totally extinguished. Emergency venting of hydrogen gas If the temperature near the safety valve located at the rear under vehicle is over 110°C caused by a fire or other reasons, the safety valve will open to vent hydrogen gas. Venting the hydrogen gas makes a loud noise because the venting speed is very fast. Stay well away from the vehicle. This jet stream of hydrogen gas could ignite. If a submersion in water occurs If your vehicle was flooded and has soaked carpeting or water on the flooring, you should not try to start the vehicle by pressing the POWER button. Call an authorized HYUNDAI dealer. H27 FEATURES OF FCEV (CONT.) If you have a flat tire while driving If a tire goes flat while you are driving: 1. Take your foot off the accelerator pedal and let the vehicle slow down while driving straight ahead. Do not apply the brakes immediately or attempt to pull off the road as this may cause a loss of control. When the vehicle has slowed to such a speed that it is safe to do so, brake carefully and pull off the road. Drive off the road as far as possible and park on firm, level ground. If you are on a divided highway, do not park in the median area between the two traffic lanes. 2. When the vehicle is stopped, turn on your emergency hazard flashers, set the parking brake and put the gear into the P (Park) position. 3. Have all passengers get out of the vehicle. Be sure they all get out on the side of the vehicle that is away from traffic. H28 If the vehicle stalls while driving Exhaust pipe 1. Reduce your speed gradually, keeping a straight line. Move cautiously off the road to a safe place. 2. Turn on your emergency flashers. 3. Try to start the vehicle again. If your vehicle will not start, contact an authorized HYUNDAI dealer. The FCEV is driven by electricity which is generated when the oxygen in the air and the hydrogen in the vehicle is combined. The principle is the opposite of the electrolysis of water; the decomposition of water making hydrogen and oxygen. The FCEV is emission-free and water is created when the hydrogen and oxygen reacts in the process of making the electricity. Some water may be discharged through the exhaust pipe when the vehicle is turned off after driving. This is normal but be careful in winter as the puddle made by the exhausted water may freeze resulting in accident. Also, take cautious as the exhausted steam may reach the vehicle parked in the back when you turn off the vehicle in winter. If the vehicle stalls at a crossroad or crossing If the vehicle stalls at a crossroad or crossing, set the gear in the N (Neutral) position and then push the vehicle to a safe place. Hydrogen station You can search the hydrogen fueling station and set the station as the destination in the Infotainment system screen. Select 'Menu-Nearby POI' in the map screen and select 'Fuel stations' to see the list of stations. Set the nearest station as the destination. Check the station operation status and opening hours before visiting the station. Fully refueling the vehicle may be impossible depending on the station condition and the reachable range may change accordingly. Also, the refueling time may vary depending on the hydrogen fueling pressure and ambient temperature. The reachable range may change according to the driving environment (weather, traffic, etc.) and driving method (sudden acceleration, heating and air conditioning, etc.). * Refueling the hydrogen gas must be done by the person who has completed the certification course and training related to the highpressure gas. Self-refueling is prohibited. H29 CUSTOMER Q&A GUIDE Category Questions Answers 1. Does a Hydrogen Fuel Cell Electric FCEV performance characteristics are generally equivalent to stanVehicle (FCEV) have similar performance dard vehicles, but with better noise control. to standard, non-electric vehicles? Every component housed in the fuel cell power module compart2. If water floods the fuel cell power module ment is designed to be waterproof through evaluation which meets compartment, due to heavy rain or flood- the IP69K standard, so you don't have to worry about any potential ing for example, will it have any effect on faults or safety problems if water contacts the fuel cell. However, if the vehicle? the vehicle is fully flooded, have the vehicle checked by an authorized HYUNDAI dealer. Vehicle overview (10 items) 3. When starting or stopping the vehicle, there's a noise. Is this noise cause for concern? In most instances, the vehicle can get startup in cold weather without any problems. However, the vehicle may not start if the vehicle is parked with the ignition off for over a week in cold temperatures. In this case, turn on the vehicle 2-3 times repeatedly. If you will not be turning on the ignition for more than a week in cold weather, it is recommended that you park the vehicle inside a building, if possible. 4. Is there a possibility that extremely cold weather can prevent vehicle startup? H30 The sound you hear is normal. The noise emanates from the blower motor starting up to remove any residual water vapor in the fuel cell system. Also, when you turn on the vehicle you may hear a brief operation sound from the hydrogen storage system which is located on the back of the vehicle. This is a normal sound which is occurred when the system tries to balance the pressure between the hydrogen tanks. Notice) In particular, make sure to park the vehicle indoor when the temperature is below -30°C. If the vehicle is parked outside for over 12 hours under such weather fuel cell components may be damaged. Also, avoid driving under such weather to prevent damaging the fuel cell components. Category Questions Answers The noise is generated from the air compressor and cooling pump 5. Why is there an engine noise at low working to supply air to the fuel cell or it's from Virtual Engine speeds, even though there is no engine? Sound System (VESS). When you turn on the vehicle or turn off the vehicle in cold weather, 6. When turning on and off the vehicle in the air compressor removes the generated water inside the fuel cell cold weather, there's a loud noise. Is this system and the noise is generated during this process, which is nornoise cause for concern? mal. In this case, certain amount of water may drain through the vehicle bottom and exhaust pipe. Vehicle overview (10 items) 7. Why does a noise emanate when the vehicle moves in reverse? Normally, the noise is a result of the Virtual Engine Sound System (VESS) working when the FCEV runs at low velocity (1~12 mph (1~20 km/h)) after shifting to D or N. However, when shifting to R, the VESS operates immediately, regardless of vehicle speed. In addition, a separate warning chime will sound to have the pedestrian aware of the approaching vehicle. The transmission of standard vehicles delivers power as conditions 8. The FCEV is equipped with a reduction require via multiple transmission gears. However, the reduction gear gear but no transmission. What makes it of the FCEV is designed to deliver power by reducing the motor's different from standard vehicles? RPM as operating conditions dictate, or to move backwards by reversing the rotational direction of the shaft. H31 CUSTOMER Q&A GUIDE (CONT.) Category Questions Answers The high voltage battery and hydrogen tank are unlikely to be damaged under normal driving conditions. However, if the system begins to mal9. Can driving on test roads or over speed function due to a direct and serious vehicular impact, you are informed bumps damage the high voltage battery of those system errors via warning lights on and the LCD display. and hydrogen tank? • Service warning light : Vehicle overview (10 items) Water or vapor discharged is generated from electrochemical reactions in the fuel cell stack, and is not harmful to humans. However, 10. A water-like liquid is being discharged liquids generated from the reactions can be somewhat acidic, so DO from the muffler and bottom of the vehi- NOT touch or ingest the liquid! cle. Is it harmful to humans? Also, the water discharged when parking the vehicle indoors may make a puddle on the ground. Be careful as such puddle can freeze and result in accident during winter. H32 Category Questions Answers Every component housed in the fuel cell power module compartment is designed to be waterproof like those found in standard vehicles. Therefore, a short circuit of the FCEV cannot happen while 11. Can I wash my FCEV with pressurized washing the car. However, your FCEV works by utilizing high-voltage water? What if water flows into the fuel electric power, so it is recommended that you avoid high-pressure car washes. If the insulation resistance of the FCEV deteriorates due to cell power module compartment? car wash, a High voltage warning light may turn on the cluster. • Service warning light : Vehicle Management (12 items) 12. When washing the fuel cell power module compartment, is there any potential risk of electric shock resulting from a high-voltage short circuit? The FCEV is designed to be a waterproof structure, but please avoid washing the inside of the compartment if possible. Because there are many high voltage parts in the power module compartment. The FCEV is designed to be a waterproof structure, but please 13. Can I wash the bottom of the vehicle? If avoid washing the botttom of the vehicle if possible. Because there yes, what should I be aware of? are high voltage cables in the under cover. 14. Can driving with a tire chain affect the drive motor? Driving with a tire chain causes no direct damage to the drive motor. 15. How should I jump start the vehicle? Try charging it by pressing the "12V BATT RESET" button first. Refer to the "If the 12 volt battery is discharged" in this guide book. It it doesn't work, refer to the "Jump starting" in the Owner's manual chapter 6. H33 CUSTOMER Q&A GUIDE (CONT.) Category Answers Stack cooling coolant is an exclusive coolant for the fuel cell, which is characterized by its use of a non-ionic anti-corrosion agent (an additive) and very low electric conductivity. In comparison, the 16. Does the FCEV use a different coolant device cooling coolant is a coolant similar to that used in standard vehicles and has a very high electric conductivity. type from that of standard vehicles? (Difference between Stack cooling If the stack cooling coolant is used with the electrical cooling syscoolant and Device cooling coolant.) tem, it will corrode the electrical system parts. If the device cooling coolant is used with the fuel cell cooling system, it will damage the system insulation resistor due to high electric conductivity. This carries the additional risk of shocking the driver (electric shock). 17. What should I be aware of when parking the vehicle? Can I park the FCEV in Hydrogen gas supply is cutoff after Power-OFF to prevent the hydroan enclosed underground parking lot? gen gas from leaking. Vehicle (Risk of hydrogen gas leak.) Management (12 items) For long-term parking situations, a high-voltage battery will gradually lose its charge [low SOC(State Of Charge)], potentially causing ignition failure. 1. In order to minimize the discharge of the high-voltage battery, turn off the power using the POWER button and disconnect the (-) terminal of the auxiliary battery (12 V) from the vehicle. 18. If the FCEV will be parked for a long period, what should I do? 2. To recharge the high-voltage battery, it is recommended that you drive your FCEV two or three times a month, for no less than 10 minutes or 2 miles (3 km) during each session. 3. If the vehicle does not startup, press the "12V BATT RESET" button or jump start the vehicle. Otherwise contact an authorized HYUNDAI dealer. H34 Questions Category Questions Answers DIY Check: Device cooling coolant, Stack cooling coolant, Brake 19. What are the do-it-yourself (DIY) main- Fluid, Tire and Wheels tenance items for the FCEV? DIY Maintenance: Washer fluid, Air cleaner, Climate control air filter, Wiper blades, Fuse, Light bulb 20. What should I be aware of when doing Be careful not to touch the high-voltage cable (orange color), DIY maintenance work? coolant, and ion filter. 21. Tell me what the potential effects are of parking long-term in a cold area (-4 °F Vehicle (-20 °C)) for the FCEV, and whether or Management not the vehicle can startup under such (12 items) conditions. In most instances, the vehicle can be started in cold weather without any problems. However, the vehicle may not start if it is parked with the power off for over a week in cold temperatures. In this case, If you will not be turning on the vehicle for more than a week in cold weather, it is recommended that you park the vehicle inside a building, if possible. High-voltage cable (orange color), ion filter, parts with a high voltage warning sticker. 22. What parts must I not touch with hands? For example, high-voltage cable, ion filter, etc.? Also, never touch the hydrogen storage system under the liftgate, the hydrogen supply pipe under the vehicle and the hydrogen supply system components on the right side (based on the driver’s position) of the hood. H35 CUSTOMER Q&A GUIDE (CONT.) Category Questions Answers 23. What shall I do if the hydrogen gas leak If the hydrogen gas leak warning light turns on during "READY" status or in driving mode, this indicates a hydrogen gas leak inside the warning light turns on on the cluster? vehicle. DO NOT lose your composure. Park your vehicle and turn OFF the vehicle. Then, we recommend that you contact an author(Red) ized HYUNDAI dealer for service. 24. Can I keep driving the vehicle even if the hydrogen gas leak warning light turns on on the cluster? (Red) Cluster/ 25. While driving to a service center after Warning Lamp the hydrogen gas leak warning light (9 items) turns on on the cluster, is it possible that the vehicle catch fire if there is something nearby to ignite the leaking gas (cigarette butt, etc.)? The fuel cell stops working if hydrogen is no longer available. However, the FCEV can run for an additional distance (About 2 miles (3 km)) in EV mode where the vehicle runs only on battery power. Mileage in EV mode can vary depending on the "state of charge" (SOC) of the high voltage battery, so move your vehicle to the nearest shoulder on the road. Then, we recommend that you contact an authorized HYUNDAI dealer for service. As soon as the hydrogen gas leak warning light appears, the fuel cell operation is disabled immediately to cut the supply of hydrogen. This prevents the possibility of a fire occurring. (Red) 26. What should I do if a power down warn- If the power down warning light turns on during "READY" status or in driving mode, power supply to the fuel cell system is cut off. If the ing light turns on? warning light turns on repeatedly when restarting the vehicle after parking your car on the safe place, we recommend that you contact an authorized HYUNDAI dealer for service. H36 Category Questions Answers 27. What should I do if the service warning If the service warning light turns on during "READY" status or in light turns on? driving mode, it may indicate a malfunction in operation with any fuel cell system. We recommend that you contact an authorized HYUNDAI dealer for service. 28. What should I do if the master warning If the service warning light turns on when there is a malfuction in light turns on? operation in any of the vehicle systems. Please look at the LCD display for details and we recommend that you contact an authorized HYUNDAI dealer for service if needed. 29. How much farther (roughly) can I drive You can continue driving for an additional 40~55 miles (70~90 km). my FCEV when the fuel warning light It may depend on driving mode. turns on? (Remaining mileage) Cluster/ " Warning Lamp 30. When restarting the vehicle, the " indicator turns on on the cluster. What (9 items) does this mean? 31. Why does the vehicle’s hydrogen tank have a life expectancy? It means that the fuel cell system is working in good order and your car is ready to drive. The hydrogen tank is frequently refueled with the high pressure hydrogen gas and the number of times refueling the vehicle is limited to 5,000 times (or 15 years). The hydrogen storage system counts the number of times the vehicle is refueled and turns on the warning light when the vehicle is refueled for over 4,995 times. Every time the vehicle is turned on the warning message "Replace hydrogen tank. Maximum number of refill cycles exceeded" is displayed on the cluster. The vehicle can be driven about 1-3 million kilometers until the vehicle is refueled 5,000 times, meaning that the hydrogen tank is used semi-permanently under common driving condition. H37 CUSTOMER Q&A GUIDE (CONT.) Category Questions Answers The fuel cell stops working if hydrogen is no longer available. However, the FCEV can run for an additional distance (About 2 miles (3 km)) in EV mode where the vehicle runs only on battery 32. What happens if hydrogen in the hydropower. Mileage in EV mode can vary depending on the "status of gen tank is completely consumed? charge" (SOC) of the high voltage battery, so move your vehicle to the nearest shoulder on the road. Then, we recommend that you contact an authorized HYUNDAI dealer for service. Hydrogen System (7 items) 33. If the hydrogen gas tank is fully refueled, how much farther can the FCEV run? It can travel as far as 300~370 miles (500~600 km) at a constant vehicle speed of 50 mph(80 kph). Realistically though, this travel distance is shorter due to normal acceleration and deceleration when driving. The tank is refueled by utilizing the difference in hydrogen pressure between the refueling station and the vehicle. When refueling, the hydrogen gas pressure of the refueling station is higher than that of 34. Which mechanism allows for the hydro- the vehicle. The act of refueling can be stopped as desired. gen gas tank to be refueled, and is it Normally, the gas tank is not fully refueled with hydrogen if the stapossible to refuel the tank as much as tion's hydrogen pressure is not sufficiently high, or if the station sysyou need? Is it possible that the tank tem cannot communicate with the vehicle. may not be fully refueled? ❈ System and the vehicle communicates the temperature and pressure of hydrogen gas via wireless network. H38 Category Questions Answers Hydrogen System (7 items) 35. In the beginning, when driving the new vehicle, I hear hissing sounds regularly from the hood while the vehicle is stopped. Is this noise cause for concern? In the beginning, the purity of hydrogen in the hydrogen tank of the new vehicle may be somewhat low. It is a normal noise which occurs when the system discharges the hydrogen more frequently compensating the low hydrogen purity. The fuel efficiency of the new vehicle may be low in the beginning due to the frequent hydrogen discharge. However, this is a normal condition. In general, the hydrogen purity returns to normal range after refueling 3-4 times. H39 CUSTOMER Q&A GUIDE (CONT.) Category Hydrogen System (7 items) H40 Questions Answers * Close the fuel cap and fuel filler door firmly. * The gas tank may not be fully filled depending on the conditions of the hydrogen station. * Carefully read any precautions about refueling at hydrogen gas stations. * Be careful not to cause static electricity when touching the fuel filler with your hand. (To avoid static electricity, be sure to touch your bare hand on something metallic as far from the fuel filler as possible.) 36. How should I refuel the tank with hydro* DO NOT get out of, or go into, your car while the gas tank is being gen gas? And what should I take care refueled. of? * DO NOT use any mobile device. Fire may occur due to electric current / radio wave from the mobile device. * Make sure that the fuel cell system stops working before refueling the gas tank. * DO NOT smoke a cigarette or strike a lighter while refueling the gas tank. * If you need assistance with refueling the gas tank after completely consuming all the available fuel in the vehicle, we recommend that you contact an authorized HYUNDAI dealer. Category Hydrogen System (7 items) Questions Answers 37. Is it possible that water, oil, etc. may be Normally, water and oil cannot flow into the hydrogen tank via the introduced to the hydrogen gas tank via fuel filler, but it can flow in while refueling. Be careful not to introthe fuel filler? If yes, what do I need to duce any contaminants via the fuel filler. do to prevent this? The hydrogen gas is in high pressure (70 MPa) condition when refueled to the vehicle's storage tank. Therefore, you will hear the sound 38. While refueling the hydrogen, I hear of the gas flowing in the beginning. Abnormal noise is occurred due irregular abnormal noises. Is this noise to the gas flow because of the difference in refueling pressure, etc. cause for concern? depending on the gas pressure condition at the refueling station and this is very normal. H41 CUSTOMER Q&A GUIDE (CONT.) Category Questions 39. What happens if hydrogen gas leaks from the fuel cell stack? (Red) Fuel Cell Stack/High Voltage Battery (4 items) Answers If hydrogen gas leaks beyond what's tolerable from the fuel cell stack, a hydrogen sensor installed in the system detects the leak and in response, turns ON the hydrogen gas leak warning light in the cluster. 40. Can the fuel cell stack explode or burn The fuel cell stack passed a high temperature test and is deemed out due to overheating? safe, so it is unlikely to explode. 41. Which symptoms occur if the fuel cell system malfunctions? If the fuel cell system malfunctions, warning lights specific to the actual problem appear on the LCD display. When this happens, the vehicle speed may be limited, or the fuel cell system may shut down. DO NOT lose your composure if this happens. Park your vehicle and turn OFF the vehicle. Then, we recommend that you contact an authorized HYUNDAI dealer for service. Like any vehicle component, the high voltage battery will decrease 42. Is the recharge performance of the high in performance as it ages over time. However, the high voltage batvoltage battery reduced depending on tery of the FCEV is durable enough to work at peak performance its length of use? beyond the warranty period. H42 Category Questions Answers The FCEV is designed to detect impact events during a collision or accident so that the hydrogen gas supply is immediately cutoff. Also, 43. Is there a risk of electric shock from the the high-voltage relay is activated to cutoff the supply of electric power high-voltage parts in the event of a collito the fuel cell stack and high-voltage battery. Moreover, the FCEV sion or accident? satisfies international electrical safety standards for collisions and accidents. Vehicle Accidents/ Towing (5 items) Despite the uniqueness of the hydrogen FCEV, you do not have to take any special safety precautions in the event of a minor collision or accident. In the event of a minor accident, turn off the vehicle to cutoff the supply of electric power and hydrogen gas. Also, the FCEV is 44. Should I take any special safety precauequipped with collision sensors at the front and rear of the vehicle so tions in the event of a collision or accithose sensors are activated during an actual collision to automatically dent? cutoff the supply of power and hydrogen to ensure driver and passenger safety. For other situations, follow the same procedures as you would with a standard vehicle. Depending on the severity of the collision or accident, take appropriate measures. 45. Is a high-voltage battery designed to Our battery packs are designed to prevent any explosion due to ensure occupant safety? Can it explode physical impact or damage, and they fully satisfy international safety from a collision? standards. H43 CUSTOMER Q&A GUIDE (CONT.) Category Questions Answers 46. Is a hydrogen tank designed to ensure The hydrogen tank is designed to prevent any risk of explosion. It is occupant safety? Can it explode from a completely safe. collision? Vehicle Accidents/ Towing (5 items) H44 47. How should the FCEV be towed, and what precautions should be taken? The FCEV can be towed in the same manner as standard vehicles. If you need emergency towing, it is recommended that you contact an authorized HYUNDAI dealer. To avoid damage to the vehicle, you need to follow proper pulling and towing procedures. The FCEV is equipped with a front wheel drive (FWD) motor, so use a flatbed or wheel dolly to tow the vehicle. If the front wheels touch the road surface while being towed, they will rotate and this can cause the FWD motor to generate electricity. This can cause unwanted failure of the FCEV. Category Questions 48. What should I do if the FCEV catches fire? Answers 1. Stop driving the car. Move the shift to P (Park), then step on the brake to turn OFF the vehicle. The fuel cell stack is shut down, which cuts off the supply of hydrogen fuel. 2. If possible, open the windows to ventilate the air. 3. If the fire is small enough to get under your own control, use the fire extinguisher to put it out. If the fire is much larger, get out of your car and contact the local fire station to report your FECV is on fire. DO NOT get close to your car before the fire is completely extinguished. In the event your FCEV catches fire with the power system OFF, the power source of the high-voltage system is cut off, so you are unlikely 49. In case of vehicle fire, should I use the to get shocked while you put out the fire using water. (Even when the Explosion or vehicle is submerged in water, there is no risk of getting shocked.) fire extinguisher? Can I use water to Fire (5 items) extinguish the fire? However, if your car catches fire with the ignition ON, you MUST use the fire extinguisher. Any attempt to extinguish the fire with water may cause electric shock. 50. What kind of fire extinguisher should I use? 51. Can the hydrogen tank explode if it overheats in very hot weather? It is recommended that you use a dedicated fire extinguisher (CO2) for an electrical fire of the high-voltage system. The hydrogen tank passed a high temperature test and is deemed safe, so it is unlikely to explode. In case of vehicle fire, a heat-sensitive safety valve is activated to exhaust the hydrogen gas downward from the tank by force. 52. In case of vehicle fire, is it possible that Therefore, the hydrogen tank is unlikely to explode. However, addithe hydrogen tank will explode? tional flames can flare up from the forced exhaustion of the gas, so please evacuate to a safe place far away from the vehicle. H45 Your vehicle at a glance 1 Your vehicle at a glance Exterior Overview ..................................................1-2 Interior Overview ...................................................1-4 Instrument Panel Overview ..................................1-5 Fuel Cell Power Module Compartment ...............1-6 Your vehicle at a glance EXTERIOR OVERVIEW ■ Front view The actual shape may differ from the illustration. 1. Hood......................................................3-42 5. Side view mirror ....................................3-31 2. Headlight ..............................................7-58 6. Sunroof..................................................3-37 3. Turn signal/daytime running lamp/ position lamp ........................................7-58 7. Front windshield wiper ..............3-103, 7-24 8. Windows ................................................3-33 4. Tires and wheels ............................7-29, 8-4 OFE018001N 1-2 ■ Rear view 1 Your vehicle at a glance The actual shape may differ from the illustration. 1. Doors ....................................................3-11 6. High mounted stop lamp ......................7-59 2. Fuel filler door ......................................3-55 7. Rear window defroster ........................3-163 3. Rear lamps ............................................7-59 8. Rear view monitor ..............................3-111 4. Backup lamp..........................................7-59 9. Antenna ..................................................4-2 5. Liftgate ..................................................3-43 10. Rear window wiper ..................3-106, 7-26 OFE018002N 1-3 Your vehicle at a glance INTERIOR OVERVIEW 1. Inside door handle ................................3-14 2. Side view mirror folding switch ..............3-32 3. Side view mirror control switch ..............3-31 4. Central door lock switch ........................3-15 5. Power window lock switch......................3-36 6. Power window switches ........................3-33 7. Instrument panel illumination control switch ........................................3-59 8. ESC OFF button ....................................5-31 9. H2O OUT ..............................................3-89 10. Lane Keeping Assist (LKA) system ....5-79 11. Blind-spot Collision-avoidance Assist (BCA) system ............................5-53 12. Power liftgate button ............................3-45 13. 12V battery reset button ........................6-5 14. Steering wheel tilt/telescope lever ......3-21 15. Steering wheel ....................................3-20 16. Seat........................................................2-4 17. Hood release lever ..............................3-42 18. Power outlet, USB charger ....3-168, 3-171 19. Fuel filler door opener button ..............3-55 The actual shape may differ from the illustration. OFE019003L 1-4 INSTRUMENT PANEL OVERVIEW 1 2. Horn ........................................................3-21 3. Driver's front air bag ................................2-49 4. POWER button ..........................................5-6 5. Light control ............................................3-91 6. Wiper/Washer ........................................3-103 7. Navigation system ....................................4-4 8. Hazard warning flasher ............................6-2 9. Climate control system ..........................3-149 10. Passenger's front air bag ......................2-49 11. Glove box ............................................3-165 12. USB and iPod® port ................................4-2 13. Reduction gear (Shift button) ................5-11 14. Drive mode button ................................5-37 15. Surround view monitor ........................3-112 16. Parking Distance Warning button ........3-108 17. Remote Smart Parking Assist (RSPA) button ..................................................3-115 18. DIS controller ......................................3-125 19. Cup holder ..........................................3-166 20. Steering wheel audio controls ................4-3 21. Trip computer/ ........................................3-85 Smart cruise controls/ ..........................5-99 The actual shape may differ from the illustration. OFE018004 1-5 Your vehicle at a glance 1. Instrument cluster....................................3-58 Your vehicle at a glance FUEL CELL POWER MODULE COMPARTMENT 1. Brake fluid reservoir..........................7-19 2. Air cleaner.........................................7-20 3. Fuse box ...........................................7-53 4. Windshield washer fluid reservoir .....7-20 5. Device cooling coolant reservoir.......7-13 6. Device cooling radiator cap ..............7-14 7. Stack cooling coolant reservoir.........7-17 8. Stack cooling radiator cap ................7-17 The actual Fuel cell power module compartment in the vehicle may differ from the illustration. 1-6 OFE071001N Safety system of your vehicle This chapter provides you with important information about how to protect yourself and your passengers. It explains how to properly use your seats and seat belts, and how your air bags work. Additionally, this chapter explains how to properly restrain infants and children in your vehicle. 2 Important Safety Precautions..............................2-2 Child Restraint System (CRS).............................2-36 Always Wear Your Seat Belt ..........................................2-2 Restrain All Children .........................................................2-2 Air Bag Hazards.................................................................2-2 Driver Distraction ..............................................................2-2 Control Your Speed...........................................................2-3 Keep Your Vehicle in Safe Condition............................2-3 Children Always in the Rear.........................................2-36 Selecting a Child Restraint System (CRS) .................2-37 Installing a Child Restraint System (CRS)..................2-39 Seats ........................................................................2-4 Safety Precautions ...........................................................2-5 Front Seats .........................................................................2-6 Rear Seats.........................................................................2-10 Head Restraints ...............................................................2-13 Seat Warmers and Air Ventilation Seats...................2-17 Seat Belts ..............................................................2-21 Seat Belt Safety Precautions.......................................2-21 Seat Belt Warning Light ................................................2-22 Seat Belt Restraint System...........................................2-24 Additional Seat Belt Safety Precautions...................2-32 Care of Seat Belts...........................................................2-35 Air Bag - Advanced Supplemental Restraint System ...2-47 Where Are the Air Bags?..............................................2-49 How Does the Air Bag System Operate?..................2-52 What to Expect After an Air Bag Inflates................2-57 Occupant Classification System (OCS).......................2-58 Why Didn't My Air Bag Go Off in a Collision? ........2-60 SRS Care............................................................................2-60 Additional Safety Precautions .....................................2-60 Air Bag Warning Labels.................................................2-60 Why Didn't My Air Bag Go Off in a Collision? ........2-63 SRS Care............................................................................2-68 Additional Safety Precautions .....................................2-69 Air Bag Warning Labels.................................................2-69 Active Hood Lift System .....................................2-70 System activation ............................................................2-70 System limitation .............................................................2-71 System malfunction........................................................2-72 Safety system of your vehicle IMPORTANT SAFETY PRECAUTIONS You will find many safety precautions and recommendations throughout this section, and throughout this manual. The safety precautions in this section are among the most important. Always Wear Your Seat Belt A seat belt is your best protection in all types of accidents. Air bags are designed to supplement seat belts, not replace them. So even though your vehicle is equipped with air bags, ALWAYS make sure you and your passengers wear your seat belts, and wear them properly. 2-2 Restrain All Children Driver Distraction All children under age 13 should ride in your vehicle properly restrained in a rear seat, not the front seat. Infants and small children should be restrained in an appropriate child restraint. Larger children should use a booster seat with the lap/shoulder belt until they can use the seat belt properly without a booster seat. Driver distraction presents a serious and potentially deadly danger, especially for inexperienced drivers. Safety should be the first concern when behind the wheel and drivers need to be aware of the wide array of potential distractions, such as drowsiness, reaching for objects, eating, personal grooming, other passengers, and using cellular phones. Drivers can become distracted when they take their eyes and attention off the road or their hands off the wheel to focus on activities other than driving. To reduce your risk of distraction or getting into an accident: • ALWAYS set up your mobile devices (for example, MP3 players, phones, navigation units, etc.) when your vehicle is parked or safely stopped. Air Bag Hazards While air bags can save lives, they can also cause serious or fatal injuries to occupants who sit too close to them, or who are not properly restrained. Infants, young children, and shorter adults are at the greatest risk of being injured by an inflating air bag. Follow all instructions and warnings in this manual. Control Your Speed Excessive speed is a major factor in crash injuries and deaths. Generally, the higher the speed, the greater the risk, but serious injuries can also occur at lower speeds. Never drive faster than is safe for current conditions, regardless of the maximum speed posted. 2 Safety system of your vehicle • ONLY use your mobile device when allowed by laws and when conditions permit safe use. NEVER text or email while driving. Most states have laws prohibiting drivers from texting. Some states and cities also prohibit drivers from using handheld phones. • NEVER let the use of a mobile device distract you from driving. You have a responsibility to your passengers and others on the road to always drive safely, with your hands on the wheel as well as your eyes and attention on the road. Keep Your Vehicle in Safe Condition Having a tire blowout or a mechanical failure can be extremely hazardous. To reduce the possibility of such problems, check your tire pressures and condition frequently, and perform all regularly scheduled maintenance. 2-3 Safety system of your vehicle SEATS Front seats (1) Seat sliding forward or rearward (2) Seatback angle adjustment (3) Seat cushion angle adjustment (4) Lumbar support adjustment (Driver’s seat)* (5) Seat warmer / Air ventilation seat* (6) Head restraint Rear seats (7) Armrest (8) Seatback angle and folding adjustment (9) Head restraint (10) Seat warmer* * : If equipped OFE038001 2-4 Air bags Adjusting the seats so that you are sitting in a safe, comfortable position plays an important role in driver and passenger safety together with the seat belts and air bags in an accident. You can take steps to reduce the risk of being injured by an inflating air bag. Sitting too close to an air bag greatly increases the risk of injury in the event the air bag inflates. The National Highway Traffic Safety Administration (NHTSA) recommends that drivers allow at least 10 inches (25 cm) between the center of the steering wheel and their chest. WARNING Do not use a cushion that reduces friction between the seat and the passenger. The passenger's hips may slide under the lap portion of the seat belt during an accident or a sudden stop. Serious or fatal internal injuries could result because the seat belt cannot operate properly. WARNING To reduce the risk of serious injury or death from an inflating air bag, take the following precautions: • Adjust the driver's seat as far to the rear as possible while maintaining the ability to maintain full control of the vehicle. • Adjust the front passenger seat as far to the rear as possible. • Hold the steering wheel by the rim with your hands at the 9 o'clock and 3 o'clock positions to minimize the risk of injuries to your hands and arms. • NEVER place anything or anyone between the steering wheel and the air bag. • Do not allow the front passenger to place feet or legs on the dashboard to minimize the risk of leg injuries. Seat belts Always fasten your seat belt before starting any trip. At all times, passengers should sit upright and be properly restrained. Infants and small children must be restrained in appropriate child restraint systems. Adults and children who have outgrown a booster seat must be restrained using the seat belts. 2-5 2 Safety system of your vehicle Safety Precautions Safety system of your vehicle WARNING Take the following precautions when adjusting your seat belt: • NEVER use one seat belt for more than one occupant. • Always position the seatback upright with the lap portion of the seat belt snug and low across the hips. • NEVER allow children or small infants to ride on a passenger's lap. • Do not route the seat belt across your neck, across sharp edges, or reroute the shoulder strap away from your body. • Do not allow the seat belt to become caught or jammed. 2-6 Front Seats • Use extreme caution when WARNING Take the following precautions when adjusting your seat: • NEVER attempt to adjust the seat while the vehicle is moving. The seat could respond with unexpected movement and may cause loss of vehicle control resulting in an accident. • Do not place anything under the front seats. Loose objects in the driver's foot area could interfere with the operation of the foot pedals, causing an accident. • Do not allow anything to interfere with the normal position and proper locking of the seatback. • Do not place a cigarette lighter on the floor or seat. When you operate the seat, gas may exit out of the lighter causing a fire. picking up small objects trapped under the seats or between the seat and the center console. Your hands might be cut or injured by the sharp edges of the seat mechanism. CAUTION To prevent injury: • Do not adjust your seat while wearing your seat belt. Moving the seat cushion forward may cause strong pressure on your abdomen. • Do not allow your hands or fingers to get caught in the seat mechanisms while the seat is moving. Power adjustment WARNING NEVER allow children in the vehicle unattended. The power seats are operable when the vehicle is turned off. NOTICE To prevent damage to the seats: • Always stop adjusting the seats when the seat has moved as far forward or rearward as possible. • Do not adjust the seats for longer than necessary when the vehicle is turned off. This may result in unnecessary battery drain. • Do not operate two or more seats at the same time. This may result in an electrical malfunction. 2 OFE038002 Forward and rearward adjustment To move the seat forward or rearward: 1. Push the control switch forward or rearward. 2. Release the switch once the seat reaches the desired position. 2-7 Safety system of your vehicle The front seat can be adjusted by using the control switches located on the outside of the seat cushion. Before driving, adjust the seat to the proper position so that you can easily control the steering wheel, foot pedals and controls on the instrument panel. Safety system of your vehicle Reclining seatback Sitting in a reclined position when the vehicle is in motion can be dangerous. Even when buckled up, the protection of your restraint system (seat belts and air bags) is greatly reduced by reclining your seatback. WARNING OFE038003 Seatback angle To adjust the seatback: 1. Rotate the top of control switch forward or rearward. 2. Release the switch once the seatback reaches the desired position. 2-8 NEVER ride with a reclined seatback when the vehicle is moving. Riding with a reclined seatback increases your chance of serious or fatal injuries in the event of a collision or sudden stop. Driver and passengers should ALWAYS sit well back in their seats, seats with the seatbacks upright and should be belted properly. Seat belts must be snug against your hips and chest to work properly. When the seatback is reclined, the shoulder belt cannot do its job because it will not be snug against your chest. Instead, it will be in front of you. During an accident, you could be thrown into the seat belt, causing neck or other injuries. The more the seatback is reclined, the greater chance the passenger’s hips will slide under the lap belt or the passenger's neck will strike the shoulder belt. Seat height To change the height of the seat : Push the rear portion of the control switch up to raise or down to lower the height of the seat. Release the switch once the seat reaches the desired position. 2 OFE038005 Lumbar support (for driver's seat) The lumbar support can be adjusted by pressing the lumbar support switch. • Press the front portion of the switch (1) to increase support or the rear portion of the switch (2) to decrease support. 2-9 Safety system of your vehicle OFE038004 Seat cushion tilt To change the angle of the front part of the seat cushion: Push the front portion of the control switch up to raise or down to lower the front part of the seat cushion. Release the switch once the seat reaches the desired position. Safety system of your vehicle Seatback pocket CAUTION Rear Seats Rear seat adjustment Do not put heavy or sharp objects in the seatback pockets. In an accident they could come loose from the pocket and injure occupants. OFE038012 The seatback pocket is provided on the back of the front passenger's seatback. WARNING To prevent the Occupant Classification System from malfunctioning: Do not hang onto the front passenger's seatback. 2-10 OFE038016N Seatback angle To recline the seatback: 1. Pull up the seatback recline lever. 2. Hold the lever and adjust the seatback of the seat to the position you desire. 3. Release the lever and make sure the seatback is locked in place. (The lever MUST return to its original position for the seatback to lock.) Folding the rear seat The rear seatbacks can be folded to facilitate carrying long items or to increase the luggage capacity of the vehicle. To fold down the rear seatback: 1. Set the front seatback to the upright position and if necessary, slide the front seat forward. 2 • Never allow passengers to sit on top of the folded down seatback while the vehicle is moving. This is not a proper seating position and no seat belts are available for use. This could result in serious injury or death in case of an accident or sudden stop. • Objects carried on the folded down seatback should not extend higher than the top of the front seatbacks. This could allow cargo to slide forward and cause injury or damage during sudden stops. OFE038015 OFE038014 3. Locate the seatbelt toward the outboard position before folding down the seatback. If not, the seatbelt system may be interfered by the seatback. 2. Lower the rear head restraints to the lowest position by pushing and holding the release button (1) and pushing down on the headrest (2). 2-11 Safety system of your vehicle WARNING Safety system of your vehicle WARNING OFE038016 OFE038018N 5. To use the rear seat, lift and unfold the seatback to the upright position by pulling up the recline lever. Push the seatback firmly until it clicks into place. Make sure the seatback is locked in place. 6. Return the rear seat belt to the proper position. Insert the belt in the guide located on the side of the rear head restraints. OFE038017 4. Put out the belt from guide (1) and pull up the seatback folding lever (2), then fold the seat toward the front of the vehicle. 2-12 When returning the rear seatback from a folded to an upright position, hold the seatback and return it slowly. Ensure that the seatback is completely locked into its upright position by pushing on the top of the seatback. In an accident or sudden stop, the unlocked seatback could allow cargo to move forward with great force and enter the passenger compartment, which could result in serious injury or death. WARNING Do not place objects in the rear seats, since they cannot be properly secured and may hit vehicle occupants in a collision causing serious injury or death. WARNING Armrest Head Restraints CAUTION • Be careful when loading cargo through the rear passenger seats to prevent damage to the vehicle interior. • When cargo is loaded through the rear passenger seats, ensure the cargo is properly secured to prevent it from moving while driving. • Unsecured cargo in the passenger compartment can cause damage to the vehicle or injury to it's occupants. WARNING OFE038019 The armrest is located in the center of the rear seat. Use the strap in the center of the armrest to pull it down. To help reduce the risk of serious injury or death in an accident, take the following precautions when adjusting your head restraints: • Always properly adjust the head restraints for all passengers BEFORE starting the vehicle. • NEVER let anyone ride in a seat with the head restraints removed or reversed. 2-13 2 Safety system of your vehicle The vehicle's front and rear seats have adjustable head restraints. The head restraints provide comfort for passengers, but more importantly they are designed to help protect passengers from whiplash and other neck and spinal injuries during an accident, especially in a rear impact collision. Make sure the vehicle is off, shifted to P(Park), and the parking brake is securely applied whenever loading or unloading cargo. Failure to take these steps may allow the vehicle to move if the shift lever is inadvertently moved to another position. Safety system of your vehicle Front seat head restraints NOTICE • To prevent damage, NEVER hit or pull on the head restraints. CAUTION OLF034072N Adjust the head restraints so the middle of the head restraint is at the same height as the height of the top of the eyes. • NEVER adjust the head restraint position of the driver's seat when the vehicle is in motion. • Adjust the head restraint as close to the passenger's head as possible. Do not use a seat cushion that holds the body away from the seatback. • Make sure the head restraint locks into position after adjusting it. 2-14 When there is no occupant in the rear seats, adjust the height of the headrest to the lowest position. The rear seat headrest can reduce the visibility of the rear area. OOSEV038012L The vehicle's front and passenger's seats are equipped with adjustable head restraints for the passengers safety and comfort. NOTICE 2 OFE038008 Removal/Reinstallation To remove the head restraint: 1. Recline the seatback (2) rearward using the seatback angle lever/ switch (1). 2. Raise the head restraint as far as it can go. 3. Press the head restraint release button (3) while pulling the head restraint up (4). To lower the head restraint: 1. Push and hold the release button (2) on the head restraint support. 2. Lower the head restraint to the desired position (3). OLF034015 If you recline the seatback towards the front with the head restraint and seat cushion raised, the head restraint may come in contact with the sunvisor or other parts of the vehicle. 2-15 Safety system of your vehicle OFE038006 Adjusting the height up and down To raise the head restraint: 1. Pull it up to the desired position (1). Safety system of your vehicle Rear seat head restraints CAUTION • Adjust the headrests so the middle of the head restraints is at the same height as the height of the top of the eyes. OFE038009 To reinstall the head restraint: 1. Put the head restraint poles (2) into the holes while pressing the release button (1). 2. Adjust the head restraint to the appropriate height. 3. Adjust the seatback (4) forward using the seatback angle lever/ switch (3). 2-16 OOSEV038030L The rear seats are equipped with head restraints in all the seating positions for the passenger's safety and comfort. • When seated in the rear seat, do not adjust the height of the head restraint to the lowest position. Seat Warmers and Air Ventilation Seats Front seat warmers (if equipped) Seat warmers are provided to warm the seats during cold weather. OFE038013 Adjusting the height up and down To raise the head restraint: 1. Pull it up to the desired position (1). To lower the head restraint: 1. Push and hold the release button (2) on the head restraint support. 2. Lower the head restraint to the desired position (3). OFE038055L Removal/Reinstallation To remove the head restraint: 1. Raise the head restraint as far as it can go. 2. Press the head restraint release button (1) while pulling the head restraint up (2). To reinstall the head restraint: 1. Put the head restraint poles into the holes (3) while pressing the release button (1). 2. Adjust the head restraint to the appropriate height. The seat warmers can cause a SERIOUS BURN, even at low temperatures and especially if used for long periods of time. Passengers must be able to feel if the seat is becoming too warm so they can turn it off, if needed. People who cannot detect temperature change or pain to the skin should use extreme caution, especially the following types of passengers: • Infants, children, elderly or disabled persons, or hospital outpatients. • People with sensitive skin or who burn easily. • Fatigued individuals. • Intoxicated individuals. 2-17 Safety system of your vehicle WARNING 2 Safety system of your vehicle During mild weather or under conditions where the operation of the seat warmer is not needed, keep the switches in the OFF position. • Each time you push the switch, the temperature setting of the seat is changed as follows : ■ Type A can cause drowsiness or sleepiness. WARNING LOW ( OFE038010 ■ Type B NOTICE To prevent damage to the seat warmers and seats: • Never use a solvent such as paint thinner, benzene, alcohol or gasoline to clean the seats. • Do not place heavy or sharp objects on seats equipped with seat warmers. • Do not change the seat cover. It may damage the seat warmer. 2-18 → HIGH ( → OFF ) → NEVER place anything on the seat that insulates against heat when the seat warmer is in operation, such as a blanket or seat cushion. This may cause the seat warmer to overheat, causing a burn or damage to the seat. ) → • People taking medication that MEDIUM ( ) • When pressing the switch for more than 1.5 seconds with the seat warmer operating, the seat warmer will turn OFF. • The seat warmer defaults to the OFF position each time the POWER button is turned to the ON position. i Information OFE038051 While the vehicle is ON, push either of the switches to warm the driver's seat or front passenger's seat. With the seat warmer switch in the ON position, the heating system in the seat turns off or on automatically depending on the seat temperature. Front air ventilation seat (if equipped) • Each time you push the switch, the airflow changes as follows: → HIGH ( MEDIUM ( ) • When pressing the switch for more than 1.5 seconds with the air ventilation seat operating, the operation will turn OFF. • The air ventilation seats defaults to the OFF position each time the POWER button is placed to the ON position. To prevent damage to the air ventilation seat: • Use the air ventilation seat ONLY when the climate control system is on. Using the air ventilation seat for prolonged periods of time with the climate control system off could cause the air ventilation seat to malfunction. • Never use a solvent such as paint thinner, benzene, alcohol or gasoline to clean the seats. • Avoid spilling liquids on the surface of the front seats and seatbacks; this may cause the air vent holes to become blocked and not work properly. • Do not place materials such as plastic bags or newspapers under the seats. They may block the air intake causing the air vents to not work properly. 2-19 2 Safety system of your vehicle OFE038011 The air ventilation seats are provided to cool the front seats by blowing air through small vent holes on the surface of the seat cushions and seatbacks. When the operation of the air ventilation seat is not needed, keep the switches in the OFF position. While the vehicle is ON, push the switch to cool the driver's seat or the front passenger's seat. ) → LOW ( ) → → OFF NOTICE Safety system of your vehicle Rear seat warmers (For CANADA) Each time you push the switch, thetemperature setting of the seat ischanged as follows : OFF → HIGH ( ) → LOW ( ) → • Do not change the seat covers. It may damage the air ventilation seat. • If the air vents do not operate, restart the vehicle. If there is no change, have the vehicle inspected by an authorized HYUNDAI dealer. The seat warmer defaults to the OFF position whenever the POWER button is placed to the ON position. i Information OFE038056L While the vehicle is ON, pusheither of the switches to warm the rearseat. During mild weather or under conditions where the operation of the seatwarmer is not needed, keep the switches in the OFF position. 2-20 With the seat warmer switch in the ON position, the heating system in theseat turns off oron automaticallydepending on the seat temperature. SEAT BELTS This section describes how to use the seat belts properly. It also describes some of the things to avoid when using seat belts. • Do not use a seat belt if the in the front passenger seat. If a child age 13 or older must be seated in the front seat, move the seat as far back as possible. And the child must always be restrained in the seat properly. NEVER allow an infant or child to be carried on an occupant’s lap. NEVER ride with the seatback reclined when the vehicle is moving. Do not allow children to share a seat or seat belt. Do not wear the shoulder belt under your arm or behind your back. Always wear both the shoulder portion and lap portion of the lap/shoulder belt. Do not use the seat belt if it is twisted. A twisted seat belt will not protect you properly in an accident. webbing or hardware is damaged. Do not latch the seat belt into the buckles of other seats. NEVER unfasten the seat belt while driving. This may cause loss of vehicle control resulting in an accident. Make sure there is nothing in the buckle interfering with the seat belt latch mechanism. This may prevent the seat belt from fastening securely. No modifications or additions should be made by the user which will either prevent the seat belt adjusting devices from operating to remove slack, or prevent the seat belt assembly from being adjusted to remove slack. Seat Belt Safety Precautions Always fasten your seat belt and make sure all passengers have fastened their seat belts before starting any trip. Air bags are designed to supplement the seat belt as an additional safety device, but they are not a substitute. Most states require all occupants of a vehicle to wear seat belts. WARNING Seat belts must be used by ALL passengers whenever the vehicle is moving. Take the following precautions when adjusting and wearing seat belts: • ALWAYS properly restrain children under age 13 in the rear seats. • • • • • • • • • • 2-21 2 Safety system of your vehicle • NEVER allow children to ride Safety system of your vehicle WARNING Damaged seat belts and seat belt assemblies will not operate properly. Always replace: • Frayed, contaminated, or damaged webbing • Damaged hardware • The entire seat belt assembly after it has been worn in an accident, even if damage to webbing or assembly is not apparent Seat Belt Warning Light Seat belt warning light OLMB033022 Driver's seat belt warning As a reminder to the driver, the seat belt warning light will illuminate for approximately 6 seconds each time the POWER button is turned ON regardless of belt fastening. At this time, if the seat belt is not fastened a warning chime will sound for 6 seconds. If you continue not to fasten the seat belt and you drive over 6 mph (9 km/h), the warning light will stay illuminated. 2-22 If you continue not to fasten the seat belt and you drive over 12 mph (20 km/h) the seat belt warning chime will sound for approximately 100 seconds and the corresponding warning light will blink. If you unfasten the seat belt while driving under 12 mph (20 km/h), the seat belt warning light will illuminate until the seat belt is fastened. If you unfasten the seat belt while driving over 12 mph (20 km/h), the seat belt warning chime will sound for approximately 100 seconds and the corresponding warning light will blink. i Information • Although the front passenger seat is not occupied, the seat belt warning light will blink or illuminate for 6 seconds. Also, when the front passenger gets out of the vehicle while the warning is activating, the warning may continue for 6 seconds even after the passenger gets off. • The front passenger's seat belt warning light may not properly operate if the front passenger does not sit properly in the seat. • The front passenger's seat belt warning may operate when luggage, electronic device, etc., are placed on the front passenger seat. 2-23 2 Safety system of your vehicle OFE038020N Front passenger's seat belt warning As a reminder to the front passenger, the front passenger's seat belt warning lights will illuminate for approximately 6 seconds each time the POWER button is turned ON position regardless of belt fastening. If you continue not to fasten the seat belt and you drive over 6 mph (9 km/h), the warning light will stay illuminated. If you continue not to fasten the seat belt and you drive over 12 mph (20 km/h) the seat belt warning chime will sound for approximately 100 seconds and the corresponding warning light will blink. If you unfasten the seat belt while driving under 12 mph (20 km/h) the seat belt warning light will illuminate until the seat belt is fastened. If you unfasten the seat belt while driving over 12 mph (20 km/h), the seat belt warning chime will sound for approximately 100 seconds and the corresponding warning light will blink. Safety system of your vehicle Seat Belt Restraint System WARNING Improperly positioned seat belts may increase the risk of serious injury in an accident. Take the following precautions when adjusting the seat belt: • Position the lap portion of the seat belt as low as possible across your hips, not on your waist, so that it fits snugly. • Position one arm under the shoulder belt and the other over the belt, as shown in the illustration. • Always position the shoulder belt anchor into the locked position at the appropriate height. • Never position the shoulder belt across your neck or face. 2-24 Seat Belt-Driver's 3-point system with emergency locking retractor OHSS038102L OHSS038101 To fasten your seat belt: Pull the seat belt out of the retractor and insert the metal tab (1) into the buckle (2). There will be an audible "click" when the tab locks into the buckle. You should place the lap belt (1) portion across your hips and the shoulder belt (2) portion across your chest. The seat belt automatically adjusts to the proper length after the lap belt portion is adjusted manually so that it fits snugly around your hips. If you lean forward in a slow, easy motion, the belt will extend and move with you. If there is a sudden stop or impact, the belt will lock into position. It will also lock if you try to lean forward too quickly. NOTICE If you are not able to smoothly pull enough of the seat belt out from the retractor, firmly pull the seat belt out and release it. After release, you will be able to pull the belt out smoothly. OFE038021 OHSS038103 To adjust the height of the seat belt anchor, lower or raise the height adjuster into an appropriate position. To raise the height adjuster, pull it up (1). To lower it, push it down (3) while pressing the height adjuster button (2). Release the button to lock the anchor into position. Try sliding the height adjuster to make sure that it has locked into position. To release your seat belt: Press the release button (1) in the locking buckle. When it is released, the belt should automatically draw back into the retractor. If this does not happen, check the belt to be sure it is not twisted, then try again. 2-25 Safety system of your vehicle Height adjustment You can adjust the height of the shoulder belt anchor to one of the three different positions for maximum comfort and safety. The shoulder portion should be adjusted so it lies across your chest and midway over your shoulder nearest the door, not over your neck. 2 Safety system of your vehicle Rear Seat Belt – Passenger's 3point system with convertible locking retractor This type of seat belt combines the features of both an emergency locking retractor seat belt and an automatic locking retractor seat belt. Convertible retractor type seat belts are installed in the rear seat positions to help accommodate the installation of child restraint systems. Although a convertible retractor is also installed in the front passenger seat position, NEVER place any infant/child restraint system in the front seat of the vehicle. 2-26 To fasten your seat belt: Pull the seat belt out of the retractor and insert the metal tab into the buckle. There will be an audible "click" when the tab locks into the buckle. When not securing a child restraint, the seat belt operates in the same way as the driver's seat belt (Emergency Locking Retractor Type). It automatically adjusts to the proper length only after the lap belt portion of the seat belt is adjusted manually so that it fits snugly across your hips. When the seat belt is fully extended from the retractor to allow the installation of a child restraint system, the seat belt operation changes to allow the belt to retract, but not to extend (Automatic Locking Retractor Type). Refer to the "Using a Child Restraint System" section in this chapter. NOTICE Although the seat belt retractor provides the same level of protection for seated passengers in either emergency or automatic locking modes, the emergency locking mode allows seated passengers to move freely in their seat while keeping some tension on the belt. During a collision or sudden stop, the retractor automatically locks the belt to help restrain your body. To deactivate the automatic locking mode, unbuckle the seat belt and allow the belt to fully retract. To fasten the rear center seat belt OHSS038103 To release your seat belt: Press the release button (1) in the locking buckle. When it is released, the belt should automatically draw back into the retractor. If this does not happen, check the belt to be sure it is not twisted, then try again. OTLE035079 OFE038059L 1. Extract the small tongue plate (A) from the slot on the belt assembly pocket located in the headliner. 2-27 2 Safety system of your vehicle 2. Insert the small tongue plate (A) into the primary buckle (A') located on the right hand (passenger) side of the center seat. Insert the buckle until an audible "click" is heard, indicating that the latch is locked. Make sure the belt is not twisted. Safety system of your vehicle 4. Pull the large tongue plate and insert it into the seat belt buckle (B') located on the left hand (driver) side of the center seat. Insert the buckle until an audible "click" is heard, indicating that the latch is locked. Make sure the belt is not twisted. OFE038060L When using the rear center seat belt, the buckle with the "CENTER" mark must be used. i Information If you are not able to pull out the safety belt from the retractor, firmly pull the belt out and release it. After release, you will be able to pull the belt out smoothly. OTLE035028 3. Slip the large tongue plate (B) out of the pocket (C) located on the belt assembly. 2-28 To release the rear center seatbelt OTL035031 1. Press the release button on the rear center seat belt buckle (B') located on the left hand (driver) side of the center seat and remove the large tongue plate (B). 2 OTLE035078 4. Insert the small tongue plate (A) into the slot on the belt assembly pocket located in the headliner. OFE038062N 2-29 Safety system of your vehicle OTLE035032 2. To release and retract the rear center seatbelt assembly, insert a small tool or key into the primary buckle release hole (A') located on the right hand (passenger) side of the center seat. You can also insert the large buckle (B) into the release hole to release the seat belt assembly. Pull up on the seat belt webbing and allow the webbing to retract automatically. 3. Slip the large tongue plate (B) into the pocket (C) located on the belt assembly. Safety system of your vehicle Pre-tensioner seat belt (Driver and front passenger) OTL035053 Your vehicle is equipped with driver's and front passenger's Pre-tensioner Seat Belts (Retractor Pretensioner and Emergency Fastening Device System). The purpose of the pre-tensioner is to make sure the seat belts fit tightly against the occupant's body in certain frontal or side collision(s). The Emergency Fastening Device System may be activated in certain crashes where the frontal collision(s) is severe enough, together with the air bags. 2-30 When the vehicle stops suddenly, or if the occupant tries to lean forward too quickly, the seat belt retractor will lock into position. In certain frontal or side collision(s), the pre-tensioner will activate and pull the seat belt into tighter contact against the occupant's body. (1) Retractor Pretensioner The purpose of the retractor pretensioner is to make sure that the shoulder belts fit in tightly against the occupant's upper body in certain frontal or side collision(s). (2) Emergency Fastening Device System The purpose of the Emergency Fastening Device System is to make sure that the pelvis belts fit in tightly against the occupant’s lower body in certain frontal collision(s). If the system senses excessive tension on the driver or passenger's seat belt when the pre-tensioner system activates, the load limiter inside the retractor pre-tensioner will release some of the pressure on the affected seat belt. WARNING • Always wear your seat belt and sit properly in your seat. • Do not use the seat belt if it is • • • • loose or twisted. A loose or twisted seat belt will not protect you properly in an accident. Do not place anything near the buckle. This may adversely affect the buckle and cause it to function improperly. Always replace your pre-tensioners after activation or an accident. NEVER inspect, service, repair or replace the pre-tensioners by yourself. This must be done by an authorized HYUNDAI dealer. Do not hit the seat belt assemblies. NOTICE WARNING OLMB033040/Q The Pre-Tensioner Seat Belt System consists mainly of the following components. Their locations are shown in the illustration above: 1. SRS air bag warning light 2. Retractor pre-tensioner 3. SRS control module 4. Emergency fastening device The sensor that activates the SRS air bag is connected with the pre–tensioner seat belts. The SRS air bag warning light on the instrument panel will illuminate for approximately 6 seconds after the POWER button is placed to the ON position, and then it should turn off. If the pre-tensioner is not working properly, the warning light will illuminate even if the SRS air bag is not malfunctioning. If the warning light does not illuminate, stays illuminated or illuminates when the vehicle is being driven, have an authorized HYUNDAI dealer inspect the pre-tensioner seat belts and SRS air bags as soon as possible. 2-31 2 Safety system of your vehicle Do not touch the pre-tensioner seat belt assemblies for several minutes after they have been activated. When the pre-tensioner seat belt mechanism deploys during a collision, the pre-tensioners become hot and can burn you. Safety system of your vehicle NOTICE • Both the driver's and front passenger's pre-tensioner seat belts may be activated in certain frontal or side collisions or rollovers. • When the pre-tensioner seat belts are activated, a loud noise may be heard and fine dust, which may appear to be smoke, may be visible in the passenger compartment. These are normal operating conditions and are not hazardous. • Although it is non-toxic, the fine dust may cause skin irritation and should not be inhaled for prolonged periods. Wash all exposed skin areas thoroughly after an accident in which the pre-tensioner seat belts were activated. 2-32 Additional Seat Belt Safety Precautions Seat belt use during pregnancy The seat belt should always be used during pregnancy. The best way to protect your unborn child is to protect yourself by always wearing the seat belt. Pregnant women should always wear a lap-shoulder seat belt. Place the shoulder belt across your chest, routed between your breasts and away from your neck. Place the lap belt line so that it fits snugly and as low as possible across the hips, not across the abdomen. WARNING • Fasten your seat belt while sitting properly in an upright position to maximize the effectiveness of the pre-tensioner seat belt system. • A pre-tensioner seat belt system is designed to activate only once. Replace the pretensioner seat belt system, if it was activated in an accident. WARNING • Pregnant women and patients are more vulnerable to any impacts on the abdomen during an abrupt stop or accident. If you are in an accident while pregnant, we recommend you consult your doctor. • To reduce the risk of serious injury or death to an unborn child during an accident, pregnant women should NEVER place the lap portion of the seat belt above or over the area of the abdomen where the unborn child is located. Seat belt use and children Infant and small children ALWAYS properly restrain infants and small children in a child restraint appropriate for the child's height and weight. To reduce the risk of serious injury or death to a child and other passengers, NEVER hold a child in your lap or arms when the vehicle is moving.The violent forces created during an accident will tear the child from your arms and throw the child against the interior of the vehicle. Small children are best protected from injury in an accident when properly restrained in the rear seat by a child restraint system that meets the requirements of the Federal Motor Vehicle Safety Standards. Before buying any child restraint system, make sure that it has a label certifying that it meets Federal Motor Vehicle Safety Standard FMVSS 213. The restraint must be appropriate for your child’s height and weight. Check the label on the child restraint for this information. Refer to the "Child Restraint Systems" section in this chapter. 2-33 2 Safety system of your vehicle All 50 states have child restraint laws which require children to travel in approved child restraint devices, including booster seats. The age at which seat belts can be used instead of child restraints differs among states, so you should be aware of the specific requirements in your state, and where you are travelling. Infant and child restraints must be properly placed and installed in a rear seat. For more information refer to the "Child Restraint Systems" section in this chapter. WARNING Safety system of your vehicle Larger children Children under age 13 and who are too large for a booster seat must always occupy the rear seat and use the available lap/shoulder belts. A seat belt should lie across the upper thighs and be snug across the shoulder and chest to restrain the child safely. Check belt fit periodically. Children are afforded the most safety in the event of an accident when they are restrained by a proper restraint system and/or seat belts in the rear seat. Always have the LATCH system inspected by your authorized HYUNDAI dealer after an accident. An accident can damage the LATCH system and may not properly secure the child restraint. If a larger child over age 13 must be seated in the front seat, the child must be securely restrained by the available lap/shoulder belt and the seat should be placed in the rearmost position. 2-34 If the shoulder belt portion slightly touches the child's neck or face, try placing the child closer to the center of the vehicle. If the shoulder belt still touches their face or neck they need to be returned to an appropriate booster seat in the rear seat. WARNING • Always make sure children are wearing their seat belts and that they are properly adjusted before driving. • NEVER allow the shoulder belt to contact the child’s neck or face. • Do not allow more than one child to use a single seat belt. Transporting an injured person A seat belt should be used when an injured person is being transported. Consult a physician for specific recommendations. One person per belt Two people (including children) should never attempt to use a single seat belt. This could increase the severity of injuries in case of an accident. Do not lie down Sitting in a reclined position when the vehicle is in motion can be dangerous. Even when buckled up, the protections of your restraint system (seat belts and air bags) is greatly reduced by reclining your seatback. To reduce the chance of injuries in the event of an accident and to achieve the maximum effectiveness of the restraint system, all passengers should be sitting up and the front and rear seats should be in an upright position when the car is moving. A seat belt cannot provide proper protection if the person is lying down in the rear seat or if the front or rear seats are in a reclined position. WARNING • NEVER ride with a reclined When to replace seat belts Seat belt systems should never be disassembled or modified. In addition, care should be taken to assure that seat belts and belt hardware are not damaged by seat hinges, doors or other abuse. The entire seat belt assembly or assemblies should be replaced if the vehicle has been involved in an accident. This should be done even if no damage is visible. Additional questions concerning seat belt operation should be directed to an authorized HYUNDAI dealer. Periodic inspection All seat belts should be inspected periodically for wear or damage of any kind. Any damaged parts should be replaced as soon as possible by an authorized HYUNDAI dealer. Keep belts clean and dry Seat belts should be kept clean and dry. If belts become dirty, they can be cleaned by using a mild soap solution and warm water. Bleach, dye, strong detergents or abrasives should not be used because they may damage and weaken the fabric. 2-35 2 Safety system of your vehicle seatback when the vehicle is moving. • Riding with a reclined seatback increases your chance of serious or fatal injuries in the event of a collision or sudden stop. • Drivers and passengers should always sit well back in their seats, properly belted, and with the seatbacks upright. Care of Seat Belts Safety system of your vehicle CHILD RESTRAINT SYSTEM (CRS) Children Always in the Rear WARNING Always properly restrain children in the rear seats of the vehicle. Children of all ages are safer when restrained in the rear seat. A child riding in the front passenger seat can be forcefully struck by an inflating air bag resulting in SERIOUS INJURY or DEATH. 2-36 Children under age 13 must always ride in the rear seats and must always be properly restrained to minimize the risk of injury in an accident, sudden stop or sudden maneuver. According to accident statistics, children are safer when properly restrained in the rear seats than in the front seat. Even with air bags, children can be seriously injured or killed. Children too large for a child restraint must use the seat belts provided. All 50 states have child restraint laws which require children to travel in approved child restraint devices. The laws governing the age or height/ weight restrictions at which seat belts can be used instead of child restraints differs among states, so you should be aware of the specific requirements in your state, and where you are travelling. Child restraint systems must be properly placed and installed in the rear seat. You must use a commercially available child restraint system that meets the requirements of the Federal Motor Vehicle Safety Standards (FMVSS 213). Child restraint systems are generally designed to be secured in a vehicle seat by lap belt portion of a lap/shoulder belt, or by a LATCH system in the rear seats of the vehicle. Child restraint system (CRS) WARNING An improperly secured child restraint can increase the risk of SERIOUS INJURY or DEATH in an accident. Always take the following precautions when using a child restraint system: • NEVER install a child or infant restraint in the front passenger's seat. • Always properly secure the child restraint to a rear seat of the vehicle. • Always follow the child restraint system manufacturer's instructions for installation and use. child in the child restraint. • If the vehicle head restraint prevents proper installation of a child seat (as described in the child restraint system manual), the head restraint of the respective seating position shall be readjusted or entirely removed. • Do not use an infant carrier or a child safety seat that "hooks" over a seatback, it may not provide adequate protection in an accident. • After an accident, have a HYUNDAI dealer check the child restraint system, seat belts, tether anchors and lower anchors. Selecting a Child Restraint System (CRS) When selecting a CRS for your child, always: • Make sure the CRS has a label certifying that it meets applicable Federal Motor Vehicle Safety Standards (FMVSS 213). • Select a child restraint based on your child's height and weight. The required label or the instructions for use typically provide this information. • Select a child restraint that fits the vehicle seating position where it will be used. • Read and comply with the warnings and instructions for installation and use provided with the child restraint system. 2-37 2 Safety system of your vehicle Infants and younger children must be restrained in an appropriate rear-facing or forward-facing CRS that has first been properly secured to the rear seat of the vehicle. Read and comply with the instructions for installation and use provided by the manufacturer of the child restraint. • Always properly restrain your Safety system of your vehicle Child restraint system types Continue to use a rearward-facing child seat for as long as your child will fit within the height and weight limits allowed by the child seat manufacturer. It's the best way to keep them safe. Once your child has outgrown the rearward-facing child restraint, your child is ready for a forward-facing child restraint with a harness. There are three main types of child restraint systems: rearward-facing seats, forward-facing seats, and booster seats. They are classified according to the child's age, height and weight. Rearward-facing child seats WARNING NEVER install a child or infant restraint in the front passenger's seat. Placing a rearward-facing child restraint in the front seat can result in SERIOUS INJURY or DEATH if the child restraint is struck by an inflating air bag. 2-38 OFE038023 A rearward-facing child seat provides restraint with the seating surface against the back of the child. The harness system holds the child in place, and in an accident, acts to keep the child positioned in the seat and reduce the stress to the neck and spinal cord. All children under age one must always ride in a rearward-facing infant child restraint. Convertible and 3-in-1 child seats typically have higher height and weight limits for the rearward-facing position, allowing you to keep your child rearward-facing for a longer period of time. Installing a Child Restraint System (CRS) WARNING 2 Before installing your child restraint system always: • Read and follow the instructions provided by the manufacturer of the child restraint. • Read and follow the instructions regarding child restraint systems in this manual. Failure to follow all warnings and instructions could increase the risk of the SERIOUS INJURY or DEATH if an accident occurs. WARNING If the vehicle headrest prevents proper installation of a child seat (as described in the child seat system manual) the headrest of the respective seating position shall be readjusted or entirely removed. 2-39 Safety system of your vehicle OFE028004 Forward-facing child restraints A forward-facing child seat provides restraint for the child's body with a harness. Keep children in a forwardfacing child seat with a harness until they reach the top height or weight limit allowed by your child restraint’s manufacturer. Once your child outgrows the forwardfacing child restraint, your child is ready for a booster seat. Booster seats A booster seat is a restraint designed to improve the fit of the vehicle's seat belt system. A booster seat positions the seat belt so that it fits properly over the lap of your child. Keep your child in a booster seat until they are big enough to sit in the seat without a booster and still have the seat belt fit properly. For a seat belt to fit properly, the lap belt must lie snugly across the upper thighs, not the stomach. The shoulder belt should lie snug across the shoulder and chest and not across the neck or face. Children under age 13 must always ride in the rear seats and must always be properly restrained to minimize the risk of injury. Safety system of your vehicle After selecting a proper child seat for your child, check to make sure it fits properly in your vehicle. Follow the instructions provided by the manufacturer when installing the child seat. Note these general steps when installing the seat to your vehicle: • Properly secure the child restraint to the vehicle. All child restraints must be secured to the vehicle with the lap part of a lap/shoulder belt or with the LATCH system. If using the lap/shoulder belt for your child restraint, the convertible locking retractor should be pulled all the way out to engage the "automatic locking" mode. (See page 2-43.) • Make sure the child restraint is firmly secured. After installing a child restraint to the vehicle, push and pull the seat forward-and-back and side-to-side to verify that it is securely attached to the seat. A child restraint secured with a seat belt should be installed as firmly as possible. However, some side-toside movement can be expected. 2-40 • Secure the child in the child restraint. Make sure the child is properly strapped in the child restraint according to the manufacturer instructions. CAUTION A child restraint in a closed vehicle can become very hot. To prevent burns, check the seating surface and buckles before placing your child in the child restraint. Lower Anchors and Tether for Children (LATCH System) The LATCH system holds a child restraint during driving and in an accident. This system is designed to make installation of the child restraint easier and reduce the possibility of improperly installing your child restraint. The LATCH system uses anchors in the vehicle and attachments on the child restraint. The LATCH system eliminates the need to use seat belts to secure the child restraint to the rear seats. Lower anchors are metal bars built into the vehicle. There are two lower anchors for each LATCH seating position that will accommodate a child restraint with lower attachments. To use the LATCH system in your vehicle, you must have a child restraint with LATCH attachments. The child seat manufacturer will provide you with instructions on how to use the child seat with its attachments for the LATCH lower anchors. WARNING 2 OFE038027N [1] : Lower Anchor Position Indicator, [2] : Lower Anchor The lower anchor position indicator symbols are located on the left and right rear seat backs to identify the position of the lower anchors in your vehicle (see arrows in illustration). The LATCH anchors are located between the seatback and the seat cushion of the rear seat left and right outboard seating positions. 2-41 Safety system of your vehicle OOSEV038012 LATCH anchors have been provided in the left and right outboard rear seating positions. Their locations are shown in the illustration. There are no LATCH anchors provided for the center rear seating position. Do not attempt to install a child restraint system using LATCH anchors in the rear center seating position.There are no LATCH anchors provided for this seat. Using the outboard seat anchors can damage the anchors which may break or fail in a collision resulting in serious injury or death. Safety system of your vehicle Securing a child restraint with the LATCH anchors system To install a LATCH-compatible child restraint in either of the rear outboard seating positions: 1. Move the seat belt buckle away from the lower anchors. 2. Move any other objects away from the anchors that could prevent a secure connection between the child restraint and the lower anchors. 3. Place the child restraint on the vehicle seat, then attach the seat to the lower anchors according to the instructions provided by the child restraint manufacturer. 4. Follow the child restraint instructions for properly adjusting and tightening the lower attachments on the child restraint to the lower anchors. 2-42 WARNING Take the following precautions when using the LATCH system: • Read and follow all installation instructions provided with your child restraint system. • To prevent the child from reaching and taking hold of unretracted seat belts, buckle all unused rear seat belts and retract the seat belt webbing behind the child. Children can be strangled if a shoulder belt becomes wrapped around their neck and the seat belt tightens. • NEVER attach more than one child restraint to a single anchor. This could cause the anchor or attachment to come loose or break. • Always have the LATCH system inspected by your authorized HYUNDAI dealer after an accident. An accident can damage the LATCH system and may not properly secure the child restraint. NOTICE The recommended weight for the LATCH system is under 65 lb (30 kg). How to determine an appropriate child restraint weight: Child weight + Child restraint weight < 65 lb (30kg) Securing a child restraint seat with "Tether Anchor" system Take the following precautions when installing the tether strap: • Read and follow all installation instructions provided with your child restraint system. • NEVER attach more than one child restraint to a single tether anchor. This could cause the anchor or attachment to come loose or break. • Do not attach the tether strap to anything other than the correct tether anchor. It may not work properly if attached to something else. • Do not use the tether anchors for adult seat belts or harnesses, or for attaching other items or equipment to the vehicle. 2 OFE038026 To install the tether anchor: 1. Route the child restraint tether strap over the child restraint seatback. Route the tether strap under the head restraint and between the head restraint posts, or route the tether strap over the top of the vehicle seatback. Make sure the strap is not twisted. 2. Connect the tether strap hook to the tether anchor, then tighten the tether strap according to the child seat manufacturer's instructions to firmly secure the child restraint to the seat. 3. Check that the child restraint is securely attached to the seat by pushing and pulling the seat forward-and-back and side-to-side. 2-43 Safety system of your vehicle OFE038025 First secure the child restraint with the LATCH lower anchors or the seat belt. If the child restraint manufacturer recommends that the top tether strap be attached, attach and tighten the top tether strap to the top tether strap anchor. Child restraint hook holders are located on the rear of the seatbacks. WARNING Safety system of your vehicle Securing a child restraint with lap/shoulder belt When not using the LATCH system, all child restraints must be secured to a vehicle rear seat with the lap part of a lap/shoulder belt. WARNING ALWAYS place a rear-facing child restraint in the rear seat of the vehicle. Placing a rear-facing child restraint in the front seat can result in serious injury or death if the child restraint is struck by an inflating air bag. OLMB033044 OFE038024 Automatic locking mode 2-44 Since all passenger seat belts move freely under normal conditions and only lock under extreme or emergency conditions (emergency locking mode), you must manually pull the seat belt all the way out to shift the retractor to the "Automatic Locking" mode to secure a child restraint. The "Automatic Locking" mode will help prevent the normal movement of the child in the vehicle from causing the seat belt to loosen and compromise the child restraint system. To secure a child restraint system, use the following procedure. To install a child restraint system on the rear seats, do the following: 1. Place the child restraint system on a rear seat and route the lap/ shoulder belt around or through the child restraint, following the restraint manufacturer's instructions. Be sure the seat belt webbing is not twisted. Make sure to insert the belt into the guide(1). 2 OLMB033097 3. Pull the shoulder portion of the seat belt all the way out. When the shoulder portion of the seat belt is fully extended, it will shift the retractor to the "Automatic Locking" (child restraint) mode. When using the rear center seat belt, you should also refer to the "Rear Seat Belt – Passenger's 3point system" section in this chapter. i Information Position the release button so that it is easy to access in case of an emergency. 2-45 Safety system of your vehicle OLMB033045 2. Fasten the lap/shoulder belt latch into the buckle. Listen for the distinct "click" sound. NOTICE Safety system of your vehicle OLMB033098 4. Slowly allow the shoulder portion of the seat belt to retract and listen for an audible "clicking" or "ratcheting" sound. This indicates that the retractor is in the "Automatic Locking" mode. If no distinct sound is heard, repeat steps 3 and 4. 5. Remove as much slack from the belt as possible by pushing down on the child restraint system while feeding the shoulder belt back into the retractor. 6. Push and pull on the child restraint system to confirm that the seat belt is holding it firmly in place. If it is not, release the seat belt and repeat steps 2 through 6. 7. Double check that the retractor is in the "Automatic Locking" mode by attempting to pull more of the seat belt out of the retractor. If you cannot, the retractor is in the "Automatic Locking" mode. If your CRS manufacturer instructs or recommends you to use a tether anchor with the lap/shoulder belt, refer to the previous pages for more information. NOTICE When the seat belt is allowed to retract to its fully stowed position, the retractor will automatically switch from the "Automatic Locking" mode to the emergency lock mode for normal adult usage. WARNING If the retractor is not in the "Automatic Locking" mode, the child restraint can move when your vehicle turns or stops suddenly. A child can be seriously injured or killed if the child restraint is not properly anchored in the car, including manually pulling the seat belt all the way out to shift the rectractor to the "Automatic Locking" mode. To remove the child restraint, press the release button on the buckle and then pull the lap/shoulder belt out of the restraint and allow the seat belt to retract fully. 2-46 AIR BAG - ADVANCED SUPPLEMENTAL RESTRAINT SYSTEM 2 Safety system of your vehicle 1. Driver's front air bag 2. Passenger's front air bag 3. Side air bag 4. Curtain air bag The actual air bags in the vehicle may differ from the illustration. OFE038028 2-47 Safety system of your vehicle This vehicle is equipped with an Advanced Supplemental Air Bag System for the driver's seat and front passenger's seats. The front air bags are designed to supplement the three-point seat belts. For these air bags to provide protection, the seat belts must be worn at all times when driving. You can be severely injured or killed in an accident if you are not wearing a seat belt. Air bags are designed to supplement seat belts, but do not replace them. Also, air bags are not designed to deploy in every collision. In some accidents, the seat belts are the only restraint protecting you. 2-48 WARNING AIR BAG SAFETY PRECAUTIONS ALWAYS use seat belts and child restraints - every trip, every time, everyone! Even with air bags, you can be seriously injured or killed in a collision if you are improperly belted or not wearing your seat belt when the air bag inflates. NEVER place a child in any child restraint or booster seat in the front passenger seat. An inflating air bag could forcefully strike the infant or child causing serious or fatal injuries. ABC - Always Buckle Children under age 13 in the back seat. It is the safest place for children of any age to ride. If a child age 13 or older must be seated in the front seat, he or she must be properly belted and the seat should be moved as far back as possible. All occupants should sit upright with the seatback in an upright position, centered on the seat cushion with their seat belt on, legs comfortably extended and their feet on the floor until the vehicle is parked and is turned off. If an occupant is out of position during an accident, the rapidly deploying air bag may forcefully contact the occupant causing serious or fatal injuries. You and your passengers should never sit or lean unnecessarily close to the air bags or lean against the door or center console. Move your seat as far back as possible from front air bags, while still maintaining control of the vehicle. The U.S. National Highway Traffic Safety Administration (NHTSA) recommends that drivers allow at least 10 inches (25 cm) between the center of the steering wheel and the chest. Where Are the Air Bags? Driver's and passenger's front air bags OFE038029 The advanced SRS offers the ability to control the air bag inflation within two levels. A first stage level is provided for moderate-severity impacts. A second stage level is provided for more severe impacts. According to the impact severity, the SRS Control Module (SRSCM) controls the air bag inflation. Failure to properly wear seat belts can increase the risk or severity of injury in an accident. ■ Passenger’s front air bag WARNING OFE038031 The purpose of the SRS is to provide the vehicle's driver and front passengers with additional protection than that offered by the seat belt system alone. To reduce the risk of serious injury or death from an inflating front air bags, take the following precautions: • Seat belts must be worn at all times to help keep occupants positioned properly. • Move your seat as far back as possible from front air bags, while still maintaining control of the vehicle. • Never lean against the door or center console. 2-49 2 Safety system of your vehicle Your vehicle is equipped with a Advanced Supplemental Restraint System (SRS) and lap/shoulder belts at both the driver and passenger seating positions. The SRS consists of air bags which are located in the center of the steering wheel, and the passenger's side front panel pad above the glove box. The air bags are labeled with the letters "AIR BAG" embossed on the pad covers. ■ Driver’s front air bag Safety system of your vehicle • Do not allow the front passenger to place their feet or legs on the dashboard. • No objects (such as crash pad cover, cellular phone holder, cup holder, air fresheners or stickers) should be placed over or near the air bag modules on the steering wheel, instrument panel, windshield glass, and the front passenger's panel above the glove box. Such objects could cause harm if the vehicle is in a crash severe enough to cause the air bags to deploy. Side air bags The side air bags are designed to deploy during certain side impact collisions, depending on the crash severity. The side and curtain air bags on both sides of the vehicle may deploy if a rollover or possible rollover is detected. The side air bags are not designed to deploy in all side impact or rollover situations. OFE038032 To reduce the risk of serious injury or death from an inflating side air bag, take the following precautions: • Seat belts must be worn at all times to help keep occupants positioned properly. OFE038033 2-50 WARNING Your vehicle is equipped with a side air bag in each front seat. The purpose of the air bag is to provide the vehicle's driver and the front passenger with additional protection than that offered by the seat belt alone. • Do not install any accessories lean their heads or bodies onto doors, put their arms on the doors, stretch their arms out of the window, or place objects between the doors and seats. Hold the steering wheel at the 9 o'clock and 3 o'clock positions, to minimize the risk of injuries to your hands and arms. Do not use any accessory seat covers. This could reduce or prevent the effectiveness of the system. Do not place any objects over the air bag or between the air bag and yourself. Also, do not attach any objects around the area the air bag inflates such as the door, side door glass, front and rear pillar. Do not place any objects between the door and the seat. They may become dangerous projectiles if the side air bag inflates. on the side or near the side air bags. • Do not put any objects between the side airbag label and seat cushion. It could cause harm if the vehicle is in a crash severe enough to cause the air bags to deploy. • Do not cause impact to the doors when the POWER button is placed to the ON position as this may cause the side air bags to inflate. • If the seat or seat cover is damaged, have the vehicle checked and repaired by an authorized HYUNDAI dealer. • • • • Curtain air bags 2 OFE038035 OFE038034 Curtain air bags are located along both sides of the roof rails above the front and rear doors. 2-51 Safety system of your vehicle • Do not allow passengers to Safety system of your vehicle They are designed to help protect the heads of the front seat occupants and the rear outboard seat occupants in certain side impact collisions. The curtain air bags are designed to deploy during certain side impact collisions, depending on the crash severity. The side and curtain air bags on both sides of the vehicle may deploy if a rollover or possible rollover is detected. The curtain air bags are not designed to deploy in all side impact or rollover situations. WARNING To reduce the risk of serious injury or death from an inflating curtain air bag, take the following precautions: • All seat occupants must wear seat belts at all times to help keep occupants positioned properly. 2-52 • Properly • • • • secure child restraints as far away from the door as possible. Do not place any objects over the air bag. Also, do not attach any objects around the area the air bag inflates such as the door, side door glass, front and rear pillar, roof side rail. Do not hang other objects except clothes, especially hard or breakable objects. In an accident, it may cause vehicle damage or personal injury. Do not allow passengers to lean their heads or bodies onto doors, put their arms on the doors, stretch their arms out of the window, or place objects between the doors and seats. Do not attempt to open or repair the side curtain air an authorized HYUNDAI dealer. How Does the Air Bag System Operate? OFE038053N The SRS consists of the following components: 1. Driver's front air bag module 2. Passenger's front air bag module 3. Side air bag modules 4. Curtain air bag modules 5. Retractor pre-tensioner 6. Air bag warning light 7. SRS control module (SRSCM)/ Rollover sensor 8. Front impact sensors 9. Side impact sensors 10. Side pressure sensors 11. Seat belt buckle sensor 12. Emergency Fastening Device System 13. Occupant classification system The SRS (Supplement Restraint System) air bag warning light on the instrument panel displays the air bag symbol depicted in the illustration. The system checks the air bag electrical system for malfunctions. The light indicates that there is a potential malfunction with your air bag system, which could include your side and curtain air bags used for rollover protection. WARNING If your SRS malfunctions, the air bag may not inflate properly during an accident, increasing the risk of serious injury or death. If any of the following conditions occur, your SRS is malfunctioning: • The light does not turn on for approximately six seconds when the POWER button is in the ON position. • The light stays on after illuminating for approximately six seconds. • The light comes on when the vehicle is ON. • The light blinks when the vehicle is ON. Have an authorized HYUNDAI dealer inspect the SRS as soon as possible if any of these conditions occur. 2-53 2 Safety system of your vehicle The SRSCM (Supplemental Restraint System Control Module) continually monitors all SRS components while the POWER button is placed to the ON position to determine if a crash impact is severe enough to require air bag deployment or pre-tensioner seat belt deployment. SRS warning light Safety system of your vehicle During a frontal collision, sensors will detect the vehicle's deceleration. If the rate of deceleration is high enough, the control unit will inflate the front air bags. The front air bags help protect the driver and front passenger by responding to frontal impacts in which seat belts alone cannot provide adequate restraint. When needed, the side air bags help provide protection in the event of a side impact or rollover. • Air bags are activated (able to inflate if necessary) only when the POWER button is placed to the ON position. • Air bags inflate in the event of certain frontal or side collisions to help protect the occupants from serious physical injury. • Generally, air bags are designed to inflate based upon the severity of a collision, its direction, etc. These two factors determine whether the sensors produce an electronic deployment/inflation signal. 2-54 • The front air bags will completely inflate and deflate in an instant. It is virtually impossible for you to see the air bags inflate during an accident. It is much more likely that you will simply see the deflated air bags hanging out of their storage compartments after the collision. • In addition to inflating in certain side collisions, vehicles equipped with a rollover sensor, side and curtain air bags will inflate if the sensing system detects a rollover. When a rollover is detected, side and curtain air bags will remain inflated longer to help provide protection from ejection, especially when used in conjunction with the seat belts. • To help provide protection, the air bags must inflate rapidly. The speed of air bag inflation is a consequence of extremely short time in which to inflate the air bag between the occupant and the vehicle structures before the occupant impacts those structures. This speed of inflation reduces the risk of serious or lifethreatening injuries and is thus a necessary part of air bag design. However, the rapid air bag inflation can also cause injuries which can include facial abrasions, bruises and broken bones because the inflation speed also causes the air bags to expand with a great deal of force. • There are even circumstances under which contact with the air bag can cause fatal injuries, especially if the occupant is positioned excessively close to the air bag. WARNING To reduce the risk of serious injury or death from an inflating air bag, take the following precautions: • NEVER place a child restraint in the front passenger seat. Always properly restrain children under age 13 in the rear seats of the vehicle. • Adjust the front passenger’s and driver's seats as far to the rear as possible while maintaining you to maintain full control of the vehicle. • Hold the steering wheel with hands at the 9 o'clock and 3 o'clock positions. • Never place anything or anyone between the air bag and the seat occupant. • Do not allow the front passenger to place their feet or legs on the dashboard. ■ Driver's front air bag (1) 2 OTLA035107 When the SRSCM detects a sufficiently severe impact to the front of the vehicle, it will automatically deploy the front air bags. 2-55 Safety system of your vehicle You can take steps to help reduce the risk of being injured by an inflating air bag. The greatest risk is sitting too close to the air bag. An air bag needs about 10 inches (25 cm) of space to inflate. NHTSA recommends that drivers allow at least 10 inches (25 cm) between the center of the steering wheel and the chest. Safety system of your vehicle ■ Driver's front air bag (2) ■ Driver's front air bag (3) OTLA035108 Upon deployment, tear seams molded directly into the pad covers will separate under pressure from the expansion of the air bags. Further opening of the covers allows full inflation of the air bags. A fully inflated air bag, in combination with a properly worn seat belt, slows the driver or the front passenger forward motion, reducing the risk of head and chest injury. WARNING OTLA035109 ■ Passenger's front air bag OLMB033057 After complete inflation, the air bag immediately starts deflating, enabling the driver to maintain forward visibility and the ability to steer or operate other controls. 2-56 To prevent objects from becoming dangerous projectiles when the passenger's air bag inflates: • Do not install or place any objects (drink holder, CD holder, stickers, etc.) on the front passenger's panel above the glove box where the passenger's air bag is located. • Do not install a container of liquid air freshener near the instrument cluster or on the instrument panel surface. What to Expect After an Air Bag Inflates WARNING After an air bag inflates, take the following precautions: • Open your windows and doors as soon as possible after impact to reduce prolonged exposure to the smoke and powder released by the inflating air bag. • Do not touch the air bag storage area's internal components immediately after an air bag has inflated. The parts that come into contact with an inflating air bag may be very hot. areas thoroughly with cold and mild soap. • Always have an authorized HYUNDAI dealer replace the air bag immediately after deployment. Air bags are designed to be used only once. Noise and smoke from inflating air bag When the air bags inflate, they make a loud noise and may produce smoke and powder in the air inside of the vehicle. This is normal and is a result of the ignition of the air bag inflator. After the air bag inflates, you may feel substantial discomfort in breathing because of the contact of your chest with both the seat belt and the air bag, as well as from breathing the smoke and powder. The powder may aggravate asthma for some people. If you experience breathing problems after an air bag deployment, seek medical attention immediately. Though the smoke and powder are nontoxic, they may cause irritation to the skin, eyes, nose, throat, etc. If this is the case, wash and rinse with cold water immediately and seek medical attention if the symptoms persist. 2-57 2 Safety system of your vehicle After a frontal or side air bag inflates, it will deflate very quickly. Air bag inflation will not prevent the driver from seeing out of the windshield or being able to steer. Curtain air bags may remain partially inflated for some time after they deploy. • Always wash exposed skin Safety system of your vehicle Occupant Classification System (OCS) OFE038054N Your vehicle is equipped with an Occupant Classification System (OCS) in the front passenger's seat. Main components of the Occupant Classification System • A detection device located within the front passenger seat cushion. • Electronic system to help determine whether the passenger air bag systems should be activated or deactivated. • An indicator light located on the overhead console which illuminates the words "PASSENGER AIR BAG OFF" indicating the front passenger air bag system is deactivated. • The overhead console air bag indicator light is interconnected with the OCS. The OCS is designed to help detect the presence of a properly-seated front passenger and determine if the passenger's front air bag should be enabled (may inflate) or not. The purpose is to help reduce the risk of injury or death from an inflating air bag to certain front passenger seat occupants, such as children, by requiring the air bag to be automatically turned OFF. 2-58 For example, if a child restraint of the type specified in the regulations is on the seat, the occupant classification sensor can detect it and cause the air bag to turn OFF. Front passenger seat adult occupants who are properly seated and wearing the seat belt properly, should not cause the passenger air bag to be automatically turned OFF. For small adults it may be turned OFF, however, if the occupant does not sit in the seat properly (for example, by not sitting upright, by sitting on the edge of the seat, or by otherwise being out of position), this could cause the sensor to turn the air bag OFF. You will find the "PASSENGER AIR BAG OFF" indicator on the center fascia panel. This system detects the conditions 1-4 in the following table and activates or deactivates the front passenger air bag based on these conditions. Condition and operation in the front passenger Occupant Classification System Indicator/Warning light Condition detected by the occupant classification system Devices "PASSENGER Front passenger SRS AIR BAG OFF" warning light air bag indicator light 1. Adult *1 Off Off Activated 2. Infant *2 or child restraint system with 12 months old *3 *4 On Off Deactivated 3. Unoccupied On Off Deactivated 4. Malfunction in the system Off On Activated * The system judges a person of adult size as an adult. When a smaller adult sits in the front passenger seat, the system may recognize him/her as a child depending on his/her physique and posture. *2 Do not allow children to ride in the front passenger seat. When a larger child who has outgrown a child restraint system sits in the front passenger seat, the system may recognize him/her as an adult depending upon his/her physique or sitting position. *3 Never install a child restraint system on the front passenger seat. *4 The PASSENGER AIR BAG "OFF" indicator may turn on or off when a child above 12 months to 12 years old (with or without child restraint system) sits in the front passenger seat. This is a normal condition. 1 2-59 2 Safety system of your vehicle Always be sure that you and all vehicle occupants are seated properly and wearing the seat belt properly for the most effective protection by the air bag and the seat belt. The OCS may not function properly if the passenger takes actions which can affect the classification system. These include: • Failing to sit in an upright position. • Leaning against the door or center console. • Sitting towards the sides of the front of the seat. • Putting their legs on the dashboard or resting them on other locations which reduce the passenger weight on the front seat. • Wearing the seat belt improperly. • Reclining the seatback. • Wearing a thick cloth like ski wear or hip protection wear. • Putting an additional thick cushion on the seat. • Putting electrical devices (for example, notebook, satellite radio) on the seat with inverter charging. Safety system of your vehicle WARNING Riding in an improper position or placing weight on the front passenger’s seat when it is unoccupied by a passenger adversely affects the OCS. To reduce the risk of serious injury or death: • NEVER put a heavy load in • NEVER ride with the seat- the front seat or seatback pocket, or hang any items on the front passenger seat. back reclined when the vehicle is moving. OLMB033103 OVQ036013NB • NEVER place your feet or • NEVER place your feet on legs on the dashboard. the front passenger seatback. OLMB033100 OLMB033102 • NEVER lean on the door or • NEVER sit with your hips center console or sit on one side of the front passenger seat. shifted towards the front of the seat. OLMB033101 2-60 OLMB033104 • Do not place electronic ger seat wearing heavily padded clothes such as ski wear and hip protector. devices such as laptops, DVD player, or conductive materials such as water bottles on the passenger seat. • Do not use electronic devices such as laptops and satellite radios which use inverter chargers. ODH035900K OTM038054 • If large quantity of liquid • Do not use car seat accessories such as thick blankets and cushions which cover up the car seat surface. ODH035901K OTM038055 has been spilled on the passenger seat, the air bag warning light may illuminate or malfunction. Therefore, make sure the seat has been completely dried before driving the vehicle. • Do not place sharp objects on the front passenger seat. These may damage the occupant detection system, if they puncture the seat cushion. • Do not place any items under the front passenger seat. • When changing or replacing the seat or seat cover, use original items only. The OCS has been developed based on using original HYUNDAI car seats only. Altering or changing the authentic parts may result in system malfunction and increase risk of injury when in collision. Any of the above could interfere with the proper operation of the OCS sensor thereby increasing the risk of an injury in an accident. 2-61 2 Safety system of your vehicle • Do not sit on the passen- Safety system of your vehicle WARNING B990A01O Proper seated position for OCS If the "PASSENGER AIR BAG OFF" indicator is on when an adult is seated in the front passenger seat, place the POWER button in the OFF position and ask the passenger to sit properly (sitting upright with the seat back in an upright position, centered on the seat cushion with their seat belt on, legs comfortably extended and their feet on the floor). Restart the vehicle and have the person remain in that position. This will allow the system to detect the person and to enable the passenger air bag. If the "PASSENGER AIR BAG OFF" indicator is still on, ask the passenger to move to the rear seat. 2-62 Never allow an adult passenger to ride in the front passenger seat when the "PASSENGER AIR BAG OFF" indicator is illuminated. During a collision, the air bag will not inflate if the indicator is illuminated. Have your passenger reposition himself in the seat. If the "PASSENGER AIR BAG OFF" indicator remains illuminated after the passenger repositions himself properly and the vehicle is restarted, have the passenger move to the rear seat because the air bag will not inflate. NOTICE The "PASSENGER AIR BAG OFF" indicator illuminates for approximately 4 seconds after the POWER button is in the ON position or after the vehicle is started. If the front passenger seat is occupied, the OCS will then classify the front passenger after several more seconds. Do Not Install a Child Restraint in the Front Passenger's Seat 1JBH3051 Even though your vehicle is equipped with the OCS, never install a child restraint in the front passenger's seat. An inflating air bag can forcefully strike a child or child restraint resulting in serious or fatal injury. WARNING • NEVER place a rear-facing or Air bags are not designed to inflate in every collision. There are certain types of accidents in which the air bag would not be expected to provide additional protection. These include rear impacts, second or third collisions in multiple impact accidents, as well as low speed impacts. Damage to the vehicle indicates collision energy absorption, and is not an indicator of whether or not an air bag should have inflated. Air bag collision sensors WARNING To reduce the risk of an air bag deploying unexpectedly and causing serious injury or death: • Do not hit or allow any objects to impact the locations where air bags or sensors are installed. • Do not perform maintenance on or around the air bag sensors. If the location or angle of the sensors is altered, the air bags may deploy when they should not or may not deploy when they should. • Do not install bumper guards or replace the bumper with a non-genuine HYUNDAI parts. This may adversely affect the collision and air bag deployment performance. • Place the POWER button to the OFF position when the vehicle is being towed to prevent inadvertent air bag deployment. • Have all air bag repairs performed by an authorized HYUNDAI dealer. 2-63 2 Safety system of your vehicle front-facing child restraint in the front passenger's seat of the vehicle. • An inflating frontal air bag could forcefully strike a child resulting in serious injury or death. • Always properly restrain children in an appropriate child restraint in the rear seat of the vehicle. Why Didn't My Air Bag Go Off in a Collision? Safety system of your vehicle 1. SRS control module/Rollover sensor 2. Front impact sensor 3. Side pressure sensor 4. Side impact sensor 5. Side impact sensor OFE038036N/OFE038037/OFE038038N/OFE038039/OFE038040/OFE038071N 2-64 Air bag inflation conditions OFE038042 Front air bags Front air bags are designed to inflate in some frontal collisions depending on the severity of impact of the front collision. OFE038033 Side and curtain air bags Side and curtain air bags are designed to inflate when an impact is detected by side collision sensors depending on the severity of impact resulting from a side impact collision. 2-65 2 Safety system of your vehicle OFE038041N Although the driver's and front passenger's air bags are designed to inflate only in frontal collisions, they also may inflate in other types of collisions if the front impact sensors detect a sufficient impact. Side and curtain air bags are designed to inflate only in side impact collisions or rollover situations, but they may inflate in other collisions if the side impact sensors detect a sufficient impact. If the vehicle chassis is impacted by bumps or objects on unimproved roads, the air bags may deploy. Drive carefully on unimproved roads or on surfaces not designed for vehicle traffic to prevent unintended air bag deployment. Safety system of your vehicle Air bag non-inflation conditions OFE038043 In certain low-speed collisions the air bags may not deploy. The air bags are designed not to deploy in such cases because they may not provide benefits beyond the protection of the seat belts. 2-66 OFE038044 OFE038045N Front air bags are not designed to inflate in rear collisions, because occupants are moved backward by the force of the impact. In this case, inflated air bags would not provide any additional benefit. Front air bags may not inflate in side impact collisions, because occupants move in the direction of the collision, and thus in side impacts, front air bag deployment would not provide additional occupant protection. However, side and curtain air bags may inflate depending on the severity of impact. 2 OFE038046 OTL035068 Just before impact, drivers often brake heavily. Such heavy braking lowers the front portion of the vehicle causing it to "ride" under a vehicle with a higher ground clearance. Air bags may not inflate in this "underride" situation because deceleration forces that are detected by sensors may be significantly reduced by such "underride" collisions. Front air bags may not inflate in rollover accidents because air bag deployment could not provide protection to the occupants. However, side and curtain air bags may inflate when the vehicle is rolled over by a side impact collision. 2-67 Safety system of your vehicle OTM038090 In an angled collision, the force of impact may direct the occupants in a direction where the air bags would not be able to provide any additional benefit, and thus the sensors may not deploy any air bags. Safety system of your vehicle SRS Care OFE038047 Air bags may not inflate if the vehicle collides with objects such as utility poles or trees, where the point of impact is concentrated and the collision energy is absorbed by the vehicle structure. 2-68 The SRS is virtually maintenancefree and there are no parts you can safely service by yourself. If the SRS air bag warning light does not illuminate when the POWER button is in the ON position, or continuously remains on, have your vehicle immediately inspected by an authorized HYUNDAI dealer. Any work on the SRS system, such as removing, installing, repairing, or any work on the steering wheel, the front passenger's panel, front seats and roof rails must be performed by an authorized HYUNDAI dealer. Improper handling of the SRS system may result in serious personal injury. WARNING To reduce the risk of serious injury or death, take the following precautions: • Do not attempt to modify or disconnect the SRS components or wiring, including the addition of any kind of badges to the pad covers or modifications to the body structure. • Do not place objects over or near the air bag modules on the steering wheel, instrument panel, or the front passenger’s panel above the glove box. • Clean the air bag pad covers with a soft cloth moistened with plain water. Solvents or cleaners could adversely affect the air bag covers and proper deployment of the system. • Always have inflated air bags replaced by an authorized HYUNDAI dealer. • If components of the air bag Additional Safety Precautions Passengers should not move out of or change seats while the vehicle is moving. A passenger who is not wearing a seat belt during a crash or emergency stop can be thrown against the inside of the vehicle, against other occupants, or be ejected from the vehicle. Do not use any accessories on seat belts. Devices claiming to improve occupant comfort or reposition the seat belt can reduce the protection provided by the seat belt and increase the chance of serious injury in a crash. Air Bag Warning Labels 2 OFE038049N Air bag warning labels, required by the U.S. National Highway Traffic Safety Administration (NHTSA), are attached to alert the driver and passengers of potential risks of the air bag system. Be sure to read all of the information about the air bags that are installed on your vehicle in this Owners Manual. Adding equipment to or modifying your air bag equipped vehicle If you modify your vehicle by changing your vehicle's frame, bumper system, front end or side sheet metal or ride height, this may affect the operation of your vehicle's air bag system. 2-69 Safety system of your vehicle system must be discarded, or if the vehicle must be scrapped, certain safety precautions must be observed. Consult an authorized HYUNDAI dealer for the necessary information. Failure to follow these precautions could increase the risk of personal injury. Do not modify the front seats. Modification of the front seats could interfere with the operation of the supplemental restraint system sensing components or side air bags. Do not place items under the front seats. Placing items under the front seats could interfere with the operation of the supplemental restraint system sensing components and wiring harnesses. Do not cause impact to the doors. Impact to the doors when the POWER button is in the ON position may cause the air bags to inflate. Modifications to accommodate disabilities. If you require modification to your vehicle to accommodate a disability, contact the HYUNDAI Customer Connect Center at 800633-5151. Safety system of your vehicle ACTIVE HOOD LIFT SYSTEM (IF EQUIPPED) The active hood lift system can help reduce risk of injury to pedestrians by raising the hood in certain accident situations. The active hood lift system has the additional deformation space under the hood, which is made available for subsequent head impact. System activation Prerequisite for activation The POWER button is in the START position and the vehicle speed is between about 15.5 mph (25 km/h) and 31 mph (50 km/h). i Information - Active hood lift system repair • If the active hood lift system has been activated, do not place the hood back by yourself. Have the system repaired by an authorized HYUNDAI dealer. • If you change or repair the front bumper, have the system checked by an authorized HYUNDAI dealer. 2-70 System activation The active hood lift system is designed to work in a frontal collision depending on the intensity, speed or angles of impact of the front collision. The system will activate when: • There is a frontal collision with a pedestrian, an animal, an obstacle or a vehicle and certain operation conditions (intensity, speed, angle of impact, etc.) are met. System limitation 2 OFE038066 OFE038067N OFE038068N OFE038069 The system will not activate when: • On side collisions, rear collision, and rollover accident. The vehicle can detect only frontal collision. • The front bumper is damaged or modified. • The vehicle is in an angled frontal collision with pedestrians. • A pedestrian is laying on the road. • A pedestrian has an object to absorb the shock such as a suit case, buggy or cart. 2-71 Safety system of your vehicle OFE038065 Safety system of your vehicle i Information System malfunction OIK037067L If there is a problem with the system a message will appear on the cluster LCD display. This warning message means that the protection of pedestrians by the active hood lift system is not working properly. If the warning message is displayed, have the system checked as soon as possible by an authorized HYUNDAI dealer. 2-72 • Do not remove or change the components and the wiring of the active hood system. • Do not change the front bumper or the body structure. • Do not install or assemble any aftermarket accessory on the front bumper or cover. • When replacing tires, make sure they are the same size as your original tires. If you drive with different tire or wheel sizes, the active hood lift system may not work normally. The above situations may cause a malfunction of the active hood lift system. Convenience features of your vehicle Accessing Your Vehicle .........................................3-3 Sunroof Open Warning..................................................3-41 Smart Key............................................................................3-3 Immobilizer System.........................................................3-10 Exterior Features.................................................3-42 Door Locks............................................................3-11 Door unlocking from outside the vehicle .................3-11 Door locking from outside the vehicle ......................3-14 Operating Door Locks from Inside the Vehicle .......3-14 Automatic Door Lock and Unlock Features .............3-17 Child-Protector Rear Door Locks ...............................3-18 Theft-Alarm System............................................3-19 Steering Wheel .....................................................3-20 Motor Driven Power Steering (MDPS) ......................3-20 Tilt Steering/Telescope Steering.................................3-21 Horn....................................................................................3-22 Heated Steering Wheel..................................................3-22 Hood ...................................................................................3-42 Non-Powered Liftgate...................................................3-43 Power Liftgate .................................................................3-45 Smart Liftgate ..................................................................3-51 Fuel Filler Door................................................................3-55 Emergency Fuel Filler Door Release..........................3-57 Instrument Cluster ...............................................3-58 Instrument Cluster Control............................................3-59 Gauges and Meters ........................................................3-59 Warning and Indicator Lights.......................................3-65 LCD Display Messages ...................................................3-76 LCD Display ...........................................................3-81 Mirrors...................................................................3-23 LCD Display Control........................................................3-81 LCD Display Modes.........................................................3-82 Inside Rearview Mirror ..................................................3-23 Side View Mirrors ...........................................................3-31 Trip Computer .......................................................3-85 H2O OUT ................................................................3-89 Windows ................................................................3-33 CSD (Cold Shut-Down)...................................................3-90 Power Windows ...............................................................3-34 Lighting..................................................................3-91 Sunroof..................................................................3-37 Exterior Lights .................................................................3-91 Welcome System ...........................................................3-101 Sunshade...........................................................................3-37 Tilt Open/Close ................................................................3-38 Slide open/close..............................................................3-39 Automatic Reversal ........................................................3-39 Resetting the sunroof....................................................3-41 Wipers and Washers..........................................3-103 Front Windshield Wipers.............................................3-103 Front Windshield Washers..........................................3-105 Rear Window Wiper and Washer..............................3-106 3 3 Driver Assist System .........................................3-107 Windshield Defrosting and Defogging............3-160 Parking Distance Warning (Reverse/Forward) System .............................................................................3-107 Rear View Monitor .......................................................3-111 Surround View Monitoring .........................................3-112 Auto Defogging System (Additional Feature with Automatic Temperature Control System)................3-162 Rear Window Defroster ..............................................3-163 Remote Smart Parking Assist (RSPA) .............3-115 Operating Condition......................................................3-116 Non-operating Condition ............................................3-117 Limitations of the System...........................................3-118 How the System Works (Smart Parking) ................3-122 How the System Works (Remote Smart Parking)..3-129 How the System Works (Smart Exit) .......................3-133 How the System Works (Remote Moving Forward/ Backward) .......................................................................3-140 Additional Instructions (Messages) ..........................3-145 Turn signal Showing Vehicle Status while System in Activation....................................................................3-146 Smart Key Showing Vehicle Status while System in Activation....................................................................3-147 Link with other Systems .............................................3-148 Automatic Climate Control System..................3-149 Automatic Temperature Control Mode ....................3-150 Manual Temperature Control Mode .........................3-150 System Operation .........................................................3-156 System Maintenance....................................................3-158 Climate Control Additional Features ...............3-164 Automatic Ventilation...................................................3-164 Sunroof Inside Air Recirculation ...............................3-164 Storage Compartment .......................................3-165 Center Console Storage ..............................................3-165 Glove Box........................................................................3-165 Interior Features ................................................3-166 Cup Holder ......................................................................3-166 Sunvisor...........................................................................3-167 Power Outlet ..................................................................3-168 AC Inverter......................................................................3-169 USB Charger...................................................................3-171 Wireless Cellular Phone Charging System..............3-171 Clock.................................................................................3-173 Coat Hook .......................................................................3-174 Floor Mat Anchor(s).....................................................3-174 Luggage Net Holder .....................................................3-175 Cargo Security Screen.................................................3-176 Exterior Features...............................................3-178 Roof Side Rails ..............................................................3-178 ACCESSING YOUR VEHICLE 1. 2. 3. 4. 5. Door Lock Door Unlock Liftgate Unlock Panic Remote Smart Parking Assist (if equipped) 6. Remote Start (if equipped) Smart Key ■ Type A OFE048006N Your HYUNDAI uses a Smart Key, which you can use to lock or unlock the driver and passenger doors or the rear liftgate. 3 OFE048003 To lock your vehicle using the door handle button or the Smart Key: 1. Make sure all doors, the hood and the liftgate are closed. 2. Make sure you have the smart key in your possession. 3. Press either the button on the door handle or the Door Lock button (1) on the smart key. The chime will sound once and the hazard warning lights will blink. 4. Make sure the doors are locked by checking the position of the door lock button inside the vehicle. 3-3 Convenience features of your vehicle OFE048005 ■ Type B Locking your vehicle Convenience features of your vehicle i Information Unlocking your vehicle The door handle button will only operate when the smart key is within 28~40 inches (0.7~1 m) from the outside door handle. Note that you cannot lock your vehicle using the door handle button if any of the following occur: • The Smart Key is in the vehicle. • The POWER button is in ACC or ON position. • Any of the doors are open except for the liftgate. WARNING Do not leave the Smart Key in your vehicle with unsupervised children. Unattended children could press the POWER button and may operate power windows or other controls, or even make the vehicle move, which could result in serious injury or death. 3-4 OFE048004 To unlock your vehicle: 1. Make sure you have the smart key in your possession. 2. Press either the button on the door handle or the Door Unock button (2) on the smart key. The driver's door will unlock and the hazard warning lights will blink two times. Two Press Unlock Feature The priority for unlocking the driver door only, or unlocking all the doors with one press may be adjusted in the User Settings mode in the Infotainment system LCD display. The Two Press Unlock feature, when enabled, will require the user to press the door unlock button once for driver door only and twice for unlocking all the doors within 4 seconds. Select or Deselect the Two Press Unlock feature in the User Settings mode in the Infotainment system LCD display. The option can be found under the following menu: Vehicle Settings mode ➞ Door/Liftgate ➞ Two Press Unlock i Information • The door handle buttons will only operate when the smart key is within 28-40 inches (0.7~1m) from the outside door handle • Either the driver or front passenger door can be opened with the door handle button when the smart key is within this range • If you press the front passenger outside door handle with the smart key in your possession, all the doors will unlock Opening the liftgate Non-power liftgate To unlock and open the liftgate: 1. Make sure you have the smart key in your possession. 2. Press either the liftgate handle release switch on the vehicle or press and hold the Liftgate Unlock button on the smart key for more than one second. The hazard warning lights will blink two times and the liftgate latch will unlock. 3. Once the liftgate is opened and then closed, the liftgate will automatically re-lock after 30 seconds. i Information • The liftgate handle switch will only operate when the smart key is within 28 inches (0.7 m) from the liftgate handle. • The Liftgate Unlock button (3) will only unlock the liftgate. It will not release the latch and open the liftgate automatically. If the Liftgate Unlock button is used, someone must still press the liftgate handle switch to open the liftgate. Power liftgate To unlock and open the liftgate: 1. Make sure you have the smart key in your possession. 2. Press either the liftgate handle release switch on the vehicle or press and hold the Liftgate Unlock button on the smart key for more than one second. The hazard warning lights will blink two times and the liftgate latch will open. 3. Once the liftgate is opened and then closed, the liftgate will automatically re-lock after 30 seconds. i Information The liftgate handle switch will only operate when the smart key is within 28 inches (0.7 m) from the liftgate handle. 3-5 3 Convenience features of your vehicle The Two Press Unlock feature can also be enabled or disabled by pressing the door lock and unlock buttons simultaneously on the Key FOB: Press and hold both the Door Lock button and the Door Unlock button simultaneously until the hazard warning lights blink. This will enable or disable the Two Press Unlock feature. Repeat this procedure to enable/disable the mode again. Convenience features of your vehicle Panic button Remote start (if equipped) Press and hold the Panic button (4) for more than one second. The horn sounds and hazard warning lights blink for about 30 seconds. To cancel the panic mode, press any button on the Smart Key. You can start the vehicle using the remote start button (6) of the smart key. Start-up You can start the vehicle without inserting the key. For information, refer to the "POWER button" section in chapter 5. NOTICE To prevent damaging the smart key: • Keep the smart key in a cool, dry place to avoid damage or malfunction. Exposure to moisture or high temperature may cause the internal circuit of the smart key to malfunction which may not be covered under warranty. • Avoid dropping or throwing the smart key. • Protect the smart key from extreme temperatures. 3-6 To start the vehicle remotely : - Lock the doors by pressing the door lock button (1) within 32 ft (10 m) distance from the vehicle. - Press the remote start button for over 2 seconds within 4 seconds after locking the doors. Press the remote start button once to turn off the vehicle. Air conditioner/heater system maintains the status before turning off the vehicle. If no further action for operating/driving the vehicle is taken, the vehicle will be turned off 10 minutes after starting the vehicle remotely. CAUTION • Laws in your country may restrict the use of remote start. You should check country regulations before using this remote starting system. • It is only possible to start the vehicle remotely when shifted to P (Park). • If the hood or the liftgate is opened, you cannot start the vehicle remotely. • The Remote start function works the same as Blue Link remote start. For further caution information, refer to the separately supplied "Blue Link (Infotainment system) manual". Remote Smart Parking Assist (RSPA) (if equipped) If the Smart Key does not operate normally, you can lock or unlock the driver's door by using the mechanical key. To reinstall the mechanical key into the FOB, insert the key in the top of the key FOB and push inward until a click sound is heard. Loss of a smart key A maximum of two Smart Keys can be registered to a single vehicle. If you happen to lose your smart key, you should immediately take the vehicle and remaining keys to your authorized HYUNDAI dealer or tow the vehicle, if necessary. OFE048007 To remove the mechanical key from the smart key FOB, slide the release lever in the direction of the arrow (1) and then pull the mechanical key (2) outward. To unlock the vehicle using the mechanical key. insert the mechanical key into the key hole in the driver door (Refer to "DOOR LOCKS" in this chapter.) 3-7 3 Convenience features of your vehicle The Remote Smart Parking Assist (RSPA) system helps the drivers park their vehicle by using sensors to measure parking spaces and control the steering wheel, gear shift and vehicle speed to semi-automatically park the vehicle and provide instruction on the Infotainment system screen to help through parking. The driver can activate the RSPA system after measuring the parking spaces or using the smart key. It is also possible to move the vehicle forward or backward using the buttons (5) on the smart key. For more details, refer to "Remote Smart Parking Assist (RSPA)" in this chapter. Mechanical key Convenience features of your vehicle Smart key precautions The smart key may not work if any of the following occur: • The smart key is close to a radio transmitter such as a radio station or an airport which can interfere with normal operation of the transmitter. • The smart key is near a mobile two way radio system or a cellular phone. • Another vehicle's smart key is being operated close to your vehicle. If the smart key does not work correctly, open and close the door with the mechanical key. If you have a problem with the smart key, contact an authorized HYUNDAI dealer. If the smart key is in close proximity to your mobile phone, the signal could be blocked by your mobile phone's normal operational signals. This is specifically relevant when the phone is active such as making and receiving calls, text messaging, and/or sending/receiving emails. When possible, avoid keeping the remote key and your mobile phone in the same location such as a pants or jacket pocket in order to avoid interference between the two devices. NOTICE Keep the smart key away from electromagnetic materials that blocks electromagnetic waves to the key surface. NOTICE Always have the smart key with you when leaving the vehicle. If the smart key is left near the vehicle, the vehicle battery may be discharged. 3-8 i Information This device complies with Part 15 of the FCC rules. Operation is subject to the following three conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. 3. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the device. Battery replacement OFE048009 If you suspect your smart key might have sustained some damage, or you feel your smart key is not working correctly, contact an authorized HYUNDAI dealer. WARNING THIS PRODUCT CONTAINS A BUTTON BATTERY. If swallowed, a lithium button battery can cause severe or fatal injuries within 2 hours. Keep batteries out of reach of children. If you think batteries may have been swallowed or placed inside any part of the body, seek immediate medical attention. i Information An inappropriately disposed battery can be harmful to the environment and human health. Dispose of the battery according to your local law(s) or regulations. OFE048008 If the Smart Key is not working properly, try replacing the battery with a new one. 3-9 3 Convenience features of your vehicle Battery Type: CR2032 To replace the battery: 1. Remove the mechanical key. 2. Use a slim tool to pry open the rear cover of the smart key. 3. Remove the old battery and insert the new battery. Make sure the battery position is correct. 4. Reinstall the rear cover of the smart key. Convenience features of your vehicle Immobilizer System The immobilizer system protects your vehicle from theft. If an improperly coded key (or other device) is used, the power system is disabled. When the POWER button is placed in the ON position, the immobilizer system indicator should come on briefly, then go off. If the indicator starts to blink, the system does not recognize the coding of the key. Place the POWER button to the OFF position, then place the POWER button to the ON position again. In some circumstances, the vehicle may not recognize your smart key if another smart key device is nearby or a metal object such as a key chain is causing interference with the smart key. If this occurs, your vehicle may not start. Remove any metal objects or additional keys near the smart key before attempting to start the vehicle again. 3-10 If the system repeatedly does not recognize the coding of the key, it is recommended that you contact your HYUNDAI dealer. Do not attempt to alter this system or add other devices to it. Electrical problems could result that may make your vehicle inoperable. WARNING In order to prevent theft of your vehicle, do not leave spare keys anywhere in your vehicle. Your immobilizer password is a customer unique password and should be kept confidential. NOTICE The transponder in your key is an important part of the immobilizer system. It is designed to give years of trouble-free service, however you should avoid exposure to moisture, static electricity and rough handling. Immobilizer system malfunction could occur. i Information This device complies with Part 15 of the FCC rules. Operation is subject to the following three conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. 3. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the device. DOOR LOCKS Door unlocking from outside the vehicle Smart key Approach unlock system The outside door handle will slide out and the doors will unlock when the driver approaches the vehicle possessing the smart key. OFE048002 FE-TAG-13 • When the "Approach unlock" is activated : - If you approach (within 40 in.(1 m)) the driver or front passenger's door handle possessing the smart key, the outside door handles slide out and the doors are unlocked. In this case, Hazard Warning Flasher blinks twice and chime also sounds twice. - After first approach, the vehicle tries detecting the smart key every 5 seconds and if the key is not detected, the doors will lock automatically and the handles will slide in. FE-TAG-10 3-11 3 Convenience features of your vehicle The driver can activate/deactivate the "Approach unlock" system on the Infotainment system screen. Go to "Vehicle settings → Door/ Tailgate → Approach unlock". • When the "Approach unlock" is deactivated : - The handle does not slide out even when you approach with the smart key in possession. The doors are unlocked if you press the outside handle as the handles slide out. • The doors will lock automatically and the handles will slide in after 30 seconds unless a door is opened. • Unlock the door and pull the outside handle to open the door. • Push the door to close. Convenience features of your vehicle NOTICE • If the door is locked/unlocked multiple times in rapid succession with the smart key, door lock button or door lock switch, the system may stop operating temporarily in order to protect the circuit. Also, the "Approach unlock" system may not operate. Try operation after a sufficient time in case the system does not operate due to multiple operations. • "Approach unlock" system is not operated continuously. Retry after a certain period of time when all the doors are closed. Mechanical key FE-TAG-7 FE-TAG-8 1. Push the front side of the door handle. 2. Pull the rear side of the handle while holding it. FE-TAG-3 3. Open the plug by using the mechanical key. 3-12 NOTICE Excessive force applied on the door and door handle may result in damage. WARNING • Close the door tightly or door FE-TAG-6 4. Put the key in and turn it clockwise. FE-TAG-4 5. Pull the handle. body parts are not caught between the doors when opening/closing the doors. • Make sure the fingers or other body parts are caught inside the handle while the handle is pulled. The door may not fully close if the handle is back to its normal position due to any foreign material. 3-13 Convenience features of your vehicle may reopen. • Make sure the fingers or other 3 Convenience features of your vehicle Door locking from outside the vehicle Smart key Operating Door Locks from Inside the Vehicle With the door lock button FE-TAG-12 FE-TAG-11 FE-TAG-9/OFE048436L 3-14 • To lock the doors, press the button on the outside door handle while carrying the smart key with you. The handle will slide in as it's locked. In this case, Hazard Warning Flasher blinks and chime also sounds once. OFE048011 • To unlock a door, push the door lock button (1) to the "Unlock" position. The red mark (2) on the door lock button will be visible. • To lock a door, push the door lock button (1) to the "Lock" position. If the door is locked properly, the red mark (2) on the door lock button will not be visible. • To open a door, pull the door handle (3) outward. • If the inner door handle of either the driver door or passenger door is pulled when the door lock button is in the lock position, the button is unlocked and the door will open. • The doors cannot be locked if the smart key is inside the vehicle and any of the doors are open. i Information When the vehicle's battery run out and you leave the vehicle, make sure all the doors are locked. You can lock the driver's door with a key and the rest of the doors with the lock button above the door inside handle. With the central door lock switch ■ Driver's door ■ Passenger's door 3 OFE048012N The driver side and front passenger side door armrest is equipped with a central door lock switch. The lock button is indicated by a ( ) symbol. The unlock button is indicated by a ( ) symbol. When the lock button (1) is pressed, all the vehicle doors will lock. When the unlock button (2) is pressed, all the vehicle doors will unlock. If the smart key is in the vehicle and any door is open, the doors will not lock even though the lock button (1) is pressed. 3-15 Convenience features of your vehicle i Information If a power door lock ever fails to function while you are in the vehicle try one or more of the following techniques to exit: • Operate the door unlock feature repeatedly (both electronic and manual) while simultaneously pulling on the door handle. • Operate the other door locks and handles, front and rear. Convenience features of your vehicle WARNING • The doors should always be fully closed and locked while the vehicle is in motion. If the doors are unlocked, the risk of being thrown from the vehicle in a crash is increased. • Do not pull the inner door handle of the driver's or passenger's door while the vehicle is moving. 3-16 WARNING Do not leave the elderly, children or animals unattended in your vehicle. An enclosed vehicle can become extremely hot, causing death or serious injury to the elderly, unattended children or animals who cannot escape from the vehicle. Children might operate features of the vehicle that could injure them, or they could encounter other harm, possibly from someone gaining entry to the vehicle. WARNING Always secure your vehicle. Leaving your vehicle unlocked increases the potential risk to you or others from someone hiding in your vehicle. To secure your vehicle, while depressing the brake, move the shift lever to the P (Park) position, engage the parking brake, and place the POWER button in the LOCK/OFF position, close all windows, lock all doors, and always take the key with you. CAUTION WARNING If you stay in the vehicle for a long time while the weather is very hot or cold, there are risks of injuries or danger to life. Do not lock the vehicle from the outside when someone is in the vehicle. Your vehicle is equipped with features that will automatically lock or unlock your vehicle based on settings you select in the Infotainment system LCD display. Auto LOCK - Enable on Speed When this feature is set in the Infotainment system LCD display, all the doors will be locked automatically when the vehicle exceeds 9 mph (15 kph). Auto LOCK - Enable on Shift When this feature is set in the Infotainment system LCD display, all the doors will be locked automatically when the vehicle is shifted out of P (Park) while the vehicle is ON. Auto UNLOCK - On shift to P When this feature is set in the Infotainment system LCD display, all the doors will be unlocked automatically when the vehicle is shifted back into P (Park). For more information on these features, refer to the LCD Display section later in this chapter. Auto UNLOCK – On vehicle Off When this feature is set in the Infotainment system LCD display, all the doors will be unlocked automatically when the vehicle is off. Additional Unlock Safety Feature - Air Bag Deployment As an additional safety feature, all doors will be automatically unlocked when an impact causes the air bags to deploy. 3-17 3 Convenience features of your vehicle Opening a door when something is approaching may cause damage or injury. Be careful when opening doors and watch for vehicles, motorcycles, bicycles or pedestrians approaching the vehicle in the path of the door. Automatic Door Lock and Unlock Features Convenience features of your vehicle Child-Protector Rear Door Locks To allow a rear door to be opened from inside the vehicle, unlock the child safety lock. WARNING OFE048013N The child safety lock is provided to help prevent children seated in the rear from accidentally opening the rear doors. The rear door safety locks should be used whenever children are in the vehicle. The child safety lock is located on the edge of each rear door. When the child safety lock is in the lock position, the rear door will not open if the inner door handle is pulled. To lock the child safety lock, insert a small flat blade tool (like a screwdriver or similar) (1) into the slot and turn it to the lock position as shown. 3-18 If children accidently open the rear doors while the vehicle is in motion, they could fall out of the vehicle. The rear door safety locks should always be used whenever children are in the vehicle. THEFT-ALARM SYSTEM Once the security system is set, opening any door, the liftgate, or the hood without using the smart key will cause the alarm to activate. The Theft Alarm System will not set if the hood, the liftgate, or any door is not fully closed. If the system will not set, check the hood, the liftgate, or the doors are fully closed. Do not attempt to alter this system or add other devices to it. i Information • Do not lock the doors until all passengers have left the vehicle. If the remaining passenger leaves the vehicle when the system is armed, the alarm will be activated. • If the vehicle is not disarmed with the smart key, open the doors by using the mechanical key and start the vehicle ( indicator ON) by directly pressing the POWER button with the smart key. • When the system is disarmed but a door or liftgate is not opened within 30 seconds, the system will be rearmed. 3-19 3 Convenience features of your vehicle This system helps to protect your vehicle and valuables. The horn will sound and the hazard warning lights will blink continuously if any of the following occurs: - A door is opened without using the smart key. - The liftgate is opened without using the smart key. - The hood is opened. The alarm continues for 30 seconds, then the system resets. To turn off the alarm, unlock the doors with the smart key. The Theft Alarm System automatically sets 30 seconds after you lock the doors and the liftgate. For the system to activate, you must lock the doors and the liftgate from outside the vehicle with the smart key or by pressing the button on the outside of the door handles with the smart key in your possession. The hazard warning lights will blink and the chime will sound once to indicate the system is armed. Convenience features of your vehicle STEERING WHEEL Motor Driven Power Steering (MDPS) The system assists you with steering the vehicle. If the vehicle is turned off or if the power steering system becomes inoperative, you may still steer the vehicle, but it will require increased steering effort. Should you notice any change in the effort required to steer during normal vehicle operation, have the system checked by an authorized HYUNDAI dealer. CAUTION If the Motor Driven Power Steering System does not operate normally, the warning light ( ) will illuminate on the instrument cluster. You may steer the vehicle, but it will require increased steering efforts. Take your vehicle to an authorized HYUNDAI dealer and have the system checked as soon as possible. 3-20 i Information The following symptoms may occur during normal vehicle operation: • The steering effort may be high immediately after placing the POWER button in the ON position. This happens as the system performs the MDPS system diagnostics. When the diagnostics is completed, the steering wheel will return to its normal condition. • When the battery voltage is low, you might have to put more steering effort. However, it is a temporary condition so that it will return to normal condition after charging the battery. • A click noise may be heard from the MDPS relay after the POWER button is in the ON or OFF position. • Motor noise may be heard when the vehicle is at a stop or at a low driving speed. • When you operate the steering wheel in low temperature, abnormal noise may occur. If temperature rises, the noise will disappear. This is a normal condition. • When an error is detected from the MDPS, the assistant function of steering effort will not be activated in order to prevent fatal accidents. Instrument cluster warning lights may be on or the steering effort may be high. When the following symptoms occur, immediately drive the vehicle to a safe area and check it. Tilt Steering / Telescope Steering CAUTION Adjust the steering wheel so it points toward your chest, not toward your face. Make sure you can see the instrument cluster warning lights and gauges. After adjusting, push the steering wheel both up and down to be certain it is locked in position. Always adjust the position of the steering wheel before driving. NEVER adjust the steering wheel while driving. This may cause loss of vehicle control resulting in an accident. 3 Convenience features of your vehicle WARNING While adjusting the steering wheel height, please do not push or pull it hard since the fixture can be damaged. OFE048014 To change the steering wheel angle and height: 1. Pull down the lock-release lever (1). 2. Adjust the steering wheel to the desired angle (2) and height (3). 3. Pull up the lock-release lever to lock the steering wheel in place. i Information After adjustment, sometimes the lock release lever may not lock the steering wheel. It is not a malfunction. This occurs when two gears are not engaged correctly. In this case, adjust the steering wheel again and then lock the steering wheel. 3-21 Convenience features of your vehicle Horn Heated Steering Wheel (if equipped) NOTICE Do not install any cover or accessory on the steering wheel. The cover or accessory could cause damage to the heated steering wheel system. OFE048016 To sound the horn, press the area indicated by the horn symbol on your steering wheel (see illustration). The horn will operate only when this area is pressed. NOTICE Do not strike the horn severely to operate it, or hit it with your fist. Do not press on the horn with a sharp-pointed object. 3-22 OFE048015 When the POWER button is in the ON position or when the vehicle is in the ready ( ) mode, press the heated steering wheel button to warm the steering wheel. The indicator on the button will illuminate. To turn the heated steering wheel off, press the button again. The indicator on the button will turn off. The heated steering wheel will automatically turn off after approximately 30 minutes. MIRRORS Inside Rearview Mirror Before driving your vehicle, check to see that your inside rearview mirror is properly positioned. Adjust the rearview mirror so that the view through the rear window is properly centered. Make sure your line of sight is not obstructed. Do not place objects in the rear seat, cargo area, or behind the rear headrests which could interfere with your vision through the rear window. NEVER adjust the mirror while driving. This may cause loss of vehicle control resulting in an accident. NOTICE When cleaning the mirror, use a paper towel or similar material dampened with glass cleaner. Do not spray glass cleaner directly on the mirror as this may cause the liquid cleaner to enter the mirror housing. Electric chromic mirror (ECM) with compass and HomeLink® system Your vehicle may be equipped with a Gentex Automatic-Dimming Mirror with a Z-Nav™ Electronic Compass Display and an Integrated HomeLink® Wireless Control System. During nighttime driving, this feature will automatically detect and reduce rearview mirror glare while the compass indicates the direction the vehicle is pointed. The HomeLink® Universal Transceiver allows you to activate your garage door(s), electric gate, home lighting, etc. WARNING To prevent serious injury during an accident or deployment of the air bag, do not modify the rearview mirror and do not install a wide mirror. 3-23 3 Convenience features of your vehicle WARNING WARNING Convenience features of your vehicle Automatic-Dimming Night Vision Safety™ (NVS®) Mirror (if equipped) The NVS® Mirror automatically reduces glare by monitoring light levels in the front and the rear of the vehicle. Any object that obstructs either light sensor will degrade the automatic dimming control feature. OFE048018N (1) (2) (3) (4) (5) (6) (7) (8) Channel 1 button Channel 2 button Status indicator LED Channel 3 button Rear light sensor Dimming ON/OFF button Compass control button Compass display 3-24 For more information regarding NVS® mirrors and other applications, please refer to the Gentex website: www.gentex.com The auto-dimming function can be controlled by pressing the ON/OFF button: 1. Pressing the button turns the autodimming function OFF which is indicated by the green Status Indicator LED turning off. 2. Pressing the button again turns the auto-dimming function ON which is indicated by the green Status Indicator LED turning on. The mirror defaults to the ON position each time the vehicle is started. Z-Nav™ Compass Display The NVS™ Mirror in your vehicle is also equipped with a Z-Nav™ Compass that shows the vehicle Compass heading in the Display Window using the 8 basic cardinal headings (N, NE, E, SE, etc.). Compass function The Compass can be turned ON and OFF and will remember the last state when the ignition is cycled. To turn the display feature ON/OFF: 1. Press and release the button to turn the display feature OFF. 2. Press and release the button again to turn the display back ON. Additional options can be set with press and hold sequences of the button and are detailed below. 3 Convenience features of your vehicle There is a difference between magnetic north and true north. To compensate for this difference you will need to adjust the Zone setting based on where you live. B520C05NF 3-25 Convenience features of your vehicle To adjust the Zone setting: 1. Determine the desired Zone Number based upon your current location on the Zone Map. 2. Press and hold the button for more than 3 but less than 6 seconds, the current Zone Number will appear on the display. 3. Pressing and holding the button again will cause the numbers to increment (Note: they will repeat …13, 14, 15, 1, 2, …). Releasing the button when the desired Zone Number appears on the display will set the new Zone. 4. Within about 5 seconds the compass will start displaying a compass heading again. There are some conditions that can cause changes to the vehicle magnets, such as installing a ski rack or a CB antenna. Body repair work on the vehicle can also cause changes to the vehicle's magnetic field. In these situations, the compass will need to be re-calibrated to quickly correct these changes. 3-26 If you need to recalibrate the compass: 1. Press and hold the button for more than 6 seconds. When the compass memory is cleared a "C" will appear in the display. 2. Drive the vehicle in 2 complete circles at less than 5 mph (8 km/h). Integrated HomeLink® Wireless Control System The HomeLink® Wireless Control System can replace up to three handheld radio-frequency (RF) transmitters with a single built-in device. This innovative feature will learn the radio frequency codes of most current transmitters to operate devices such as gate operators, garage door openers, entry door locks, security systems, even home lighting. Both standard and rolling code-equipped transmitters can be programmed by following the outlined procedures. Additional HomeLink® information can be found at: www.homelink.com or by calling 1-800-355-3515. Retain the original transmitter of the RF device you are programming for use in other vehicles as well as for future HomeLink® programming. It is also suggested that upon the sale of the vehicle, the programmed HomeLink® buttons be erased for security purposes. WARNING Rolling code programming Rolling code devices which are "code-protected" and manufactured after 1996 may be determined by the following: • Reference the device owner’s manual for verification. • The handheld transmitter appears to program the HomeLink® Universal Transceiver but does not activate the device. • Press and hold the trained HomeLink button. The device has the rolling code feature if the indicator light flashes rapidly and then turns solid after 2 seconds. 3-27 3 Convenience features of your vehicle Before programming HomeLink® to a garage door opener or gate operator, make sure people and objects are out of the way of the device to prevent potential harm or damage. Do not use the HomeLink® with any garage door opener that lacks the safety stop and reverse features required by U.S. federal safety standards (this includes any garage door opener model manufactured before April 1, 1982). A garage door that cannot detect an object - signaling the door to stop and reverse does not meet current U.S. federal safety standards. Using a garage door opener without these features increases the risk of serious injury or death. Programming HomeLink® Please note the following: • When programming a garage door opener, it is advised to park the vehicle outside of the garage. • It is recommended that a new battery be placed in the hand-held transmitter of the device being programmed to HomeLink® for quicker training and accurate transmission of the radio-frequency signal. • Some vehicles may require the POWER button to be placed in the ACC (or "Accessories") position for programming and/or operation of HomeLink®. • In the event that there are still programming difficulties or questions after following the programming steps listed below, contact HomeLink® at: www.homelink.com or by calling 1-800-355-3515. Convenience features of your vehicle To train rolling code devices, follow these instructions: 1. At the garage door opener receiver (motor-head unit) in the garage, locate the "learn" or "smart" button. This can usually be found where the hanging antenna wire is attached to the motor-head unit. Exact location and color of the button may vary by garage door opener brand. If there is difficulty locating the training button, reference the device owner’s manual or please visit our Web site at www.homelink.com. 2. Firmly press and release the "learn" or "smart" button (which activates the "training light"). You will have 30 seconds to initiate step 3. 3-28 3. Return to the vehicle and firmly press, hold for two seconds and then release the desired HomeLink® button. Repeat the "press/hold/release" sequence a second time to complete the programming. (Some devices may require you to repeat this sequence a third time to complete the programming.) 4. Press and hold the just-trained HomeLink® button and observe the red Status Indicator LED. If the indicator light stays on constantly, programming is complete and your device should activate. 5. To program the remaining two HomeLink® buttons, follow either steps 1 through 4 above for other Rolling Code devices or steps 2 through 5 in Standard Programming for standard devices. Standard programming To train most devices, follow these instructions: 1. For first-time programming, press and hold the two outside buttons, HomeLink® Channel 1 and Channel 3 Buttons, until the indicator light begins to flash (after 20 seconds). Release both buttons. Do not hold the buttons for longer than 30 seconds. 2. Position the end of your hand-held transmitter 1-3 inches (2-8 cm) away from the HomeLink® buttons while keeping the indicator light in view. 3. Simultaneously press and hold both the HomeLink® and handheld transmitter button. DO NOT release the buttons until step 4 has been completed. 4. While continuing to hold the buttons the red Indicator Status LED will flash slowly and then rapidly after HomeLink® successfully trains to the frequency signal from the hand-held transmitter. Release both buttons. Gate operator & Canadian programming During programming, your handheld transmitter may automatically stop transmitting. Continue to press the Integrated HomeLink® Wireless Control System button (note steps 2 through 4 in the Standard Programming portion of this document) while you press and re-press ("cycle") your handheld transmitter every two seconds until the frequency signal has been learned. The indicator light will flash slowly and then rapidly after several seconds upon successful training. Operating HomeLink® To operate, simply press and release the programmed HomeLink® button. Activation will now occur for the trained device (for example, garage door opener, gate operator, security system, entry door lock, home/office lighting, etc.). For convenience, the hand-held transmitter of the device may also be used at any time. Reprogramming a single HomeLink® button To program a new device to a previously trained HomeLink® button, follow these steps: 1. Press and hold the desired HomeLink® button. Do NOT release until step 4 has been completed. 2. When the indicator light begins to flash slowly (after 20 seconds), position the handheld transmitter 1 to 3 inches away from the HomeLink® surface. 3. Press and hold the handheld transmitter button. The HomeLink® indicator light will flash, first slowly and then rapidly. 4. When the indicator light begins to flash rapidly, release both buttons. 5. Press and hold the just-trained HomeLink® button and observe the red Status Indicator LED. If the indicator light stays on constantly, programming is complete and your new device should activate. 3-29 3 Convenience features of your vehicle 5. Press and hold the just-trained HomeLink® button and observe the red Status Indicator LED. If the indicator light stays on constantly, programming is complete and your device should activate when the HomeLink® button is pressed and released. 6. To program the remaining two HomeLink® buttons, follow steps 2 through 5. Convenience features of your vehicle Erasing HomeLink® buttons Individual buttons cannot be erased. However, to erase all three programmed buttons: 1. Press and hold the two outer HomeLink® buttons until the indicator light begins to flash-after 20 seconds. 2. Release both buttons. Do not hold for longer than 30 seconds. The Integrated HomeLink® Wireless Control System is now in the training (learn) mode and can be programmed at any time following the appropriate steps in the Programming chapters above. NVS® is a registered trademark and Z-Nav™ is a trademark of the Gentex Corporation, Zeeland, Michigan. HomeLink® is a registered trademark owned by Johnson Controls, Incorporated, Milwaukee, Wisconsin. FCC ID : NZLHFCHL4 IC : 4112A-HFCHL4 3-30 i Information This device complies with Part 15 of the FCC Rules. Operation is subject to the following three conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. 3. The transceiver has been tested and complies with FCC and Industry Canada rules. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the device. i Information FOR CANADA This device complies with Industry Canada Standard RSS-210. Operation is subject to the following three conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. 3. The transceiver has been tested and complies with FCC and Industry Canada rules. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the device. Side View Mirrors Use the inside rear view mirror or look back directly to determine the actual distance of other vehicles prior to changing lanes. Side view mirror adjustment WARNING 3 OFE048019 Make sure to adjust the side view mirrors to your desired position before you begin driving. Your vehicle is equipped with both left-hand and right-hand side view mirrors. The mirrors can be adjusted remotely with the remote switch. The side view mirrors can be folded to help prevent damage when going through an automatic car wash or when passing through a narrow street. The right side view mirror is convex. Objects seen in the mirror are closer than they appear. NOTICE • Do not scrape ice off the mirror face; this may damage the surface of the glass. • If the mirror is jammed with ice, do not adjust the mirror by force. Use an approved de-icer (not radiator antifreeze) spray, or a sponge or soft cloth with very warm water, or move the vehicle to a warm place and allow the ice to melt. OFE048430L Adjusting the side view mirrors: 1. Press either the L (driver's side) or R (passenger's side) button (1) to select the side view mirror you would like to adjust. 2. Use the mirror adjustment control switch (2) to position the selected mirror up, down, left or right. NOTICE Do not clean the mirror with harsh abrasives, fuel or other petroleum based cleaning products. 3-31 Convenience features of your vehicle Do not adjust or fold the side view mirrors while driving. This may cause loss of vehicle control resulting in an accident. Convenience features of your vehicle NOTICE Folding the side view mirror • The mirrors stop moving when they reach the maximum adjusting angles, but the motor continues to operate while the switch is pressed. Do not press the switch longer than necessary, because this can damage the motor. • Do not attempt to adjust the side view mirrors by hand, because this can damage the motor. • If 'Convenience → Welcome mirror/ light → On door unlock' and 'Convenience → Welcome mirror/ light → On driver approach' is selected in the vehicle Settings mode on the Infotainment system screen, the side view mirror will unfold automatically when you approach the vehicle (all doors closed and locked) with a smart key in possession. NOTICE OFE048021 The side view mirror can be folded or unfolded by pressing the switch. • If 'Convenience → Welcome mirror/ light → On door unlock' is selected in the vehicle Settings mode on the Infotainment system screen, the side view mirror will fold or unfold automatically as follows: - The mirror will fold or unfold when the door is locked or unlocked by the smart key. - The mirror will fold or unfold when the door is locked or unlocked by the button on the outside door handle. 3-32 The electric type side view mirror operates even though the POWER button is in the OFF position. However, to prevent unnecessary battery discharge, do not adjust the mirrors longer than necessary while the vehicle is not in the ready ( ) mode. NOTICE Do not fold the electric type side view mirror by hand. It could cause motor failure. WINDOWS OFE048023N 3-33 3 Convenience features of your vehicle (1) Driver's door power window switch (2) Front passenger's door power window switch (3) Rear door (left) power window switch (4) Rear door (right) power window switch (5) Window opening and closing (6) Automatic power window (if equipped) (7) Power window lock switch Convenience features of your vehicle Power Windows The POWER button must be in the ON position to be able to raise or lower the windows. Each door has a Power Window switch to control that door's window. The driver has a Power Window Lock switch which can block the operation of rear passenger windows. The power windows will operate for approximately 10 minutes after the POWER button is placed in the ACC or OFF position. However, if the front doors are opened, the Power Windows will not operate even within the 10 minutes period. WARNING To avoid serious injury or death, do not extend your head, arms or body outside the windows while driving. 3-34 i Information • In cold and wet climates, power windows may not work properly due to freezing conditions. • While driving with the rear windows down or with the sunroof (if equipped) opened (or partially opened), your vehicle may demonstrate a wind buffeting or pulsation noise. This noise is normal and can be reduced or eliminated by taking the following actions. If the noise occurs with one or both of the rear windows down, partially lower both front windows approximately one inch. If you experience the noise with the sunroof open, slightly close the sunroof. Window opening and closing OFE048024 To open: Press the window switch down to the first detent position (5). Release the switch when you want the window to stop. To close: Pull the window switch up to the first detent position (5). Release the window switch when you want the window to stop. Auto up/down window (if equipped) If the power windows do not operate normally, the automatic power window system must be reset as follows: 1. Place the POWER button to the ON position. 2. Close the window and continue pulling up on the power window switch for at least one second. If the power windows do not operate properly after resetting, have the system checked by an authorized HYUNDAI dealer. WARNING The automatic reverse feature doesn't activate while resetting the power window system. Make sure body parts or other objects are safely out of the way before closing the windows to avoid injuries or vehicle damage. Automatic reverse (if equipped) 3 OLF044032 If a window senses any obstacle while it is closing automatically, it will stop and lower approximately 12 inches (30 cm) to allow the object to be cleared. If the window detects the resistance while the power window switch is pulled up continuously, the window will stop upward movement then lower approximately 1 inch (2.5 cm). If the power window switch is pulled up continuously again within 5 seconds after the window is lowered by the automatic window reverse feature, the automatic window reverse will not operate. 3-35 Convenience features of your vehicle Pressing or pulling up the power window switch momentarily to the second detent position (6) completely lowers or lifts the window even when the switch is released. To stop the window at the desired position while the window is in operation, pull up or press down and release the switch. To reset the power windows Convenience features of your vehicle i Information Power window lock switch The automatic reverse feature is only active when the "Auto Up" feature is used by fully pulling up the switch to the second detent. Do not allow children to play with the power windows. Keep the driver's door power window lock switch in the LOCK position. Serious injury or death can result from unintentional window operation by a child. WARNING Make sure body parts or other objects are safely out of the way before closing the windows to avoid injuries or vehicle damage. Objects less than 0.16 inch (4 mm) in diameter caught between the window glass and the upper window channel may not be detected by the automatic reverse window and the window will not stop and reverse direction. NOTICE Do not install any accessories on the windows.The automatic reverse feature may not operate. 3-36 WARNING NOTICE OFE048025 The driver can disable the power window switches on the rear passenger doors by pressing the power window lock switch. When the power window lock switch is pressed: • The rear passenger control will not be able to operate the rear passenger power window • Note that the front passenger control is still able to operate the front passenger window, and that the driver master control can still operate all the power windows. • To prevent possible damage to the power window system, do not open or close two windows or more at the same time. This will also ensure the longevity of the fuse. • Never try to operate the main switch on the driver's door and the individual door window switch in opposite directions at the same time. If this is done, the window will stop and cannot be opened or closed. SUNROOF (IF EQUIPPED) If your vehicle is equipped with a sunroof, you can slide or tilt your sunroof with the sunroof switch located on the overhead console. The sunroof can only be operated when the Engine Start/Stop button is in the ON or START position. The sunroof can be operated for approximately 10 minutes after the Engine Start/Stop button is in the ACC or OFF position. Sunshade • Never adjust the sunroof or sunshade while driving. This could result in loss of control and an accident that may cause injury, or property damage. • Do not leave the engine running and the key in your vehicle with unsupervised children. Unattended children could operate the sunroof, which could result in serious injury. • Do not sit on the top of the vehicle. It may cause injury or vehicle damage. 3 OIK047091 Use the sunshade to block direct sunlight coming through the sunroof glass. Open or close the sunshade by hand. NOTICE Do not operate the sunroof when roof bars are installed on the vehicle or when there is luggage on the roof. 3-37 Convenience features of your vehicle OFE048026N WARNING Convenience features of your vehicle i Information i Information Tilt Open/Close The sunshade opens automatically when the sunroof glass is opened, but the sunshade does not close automatically when the sunroof glass is closed. Also, only the sunshade cannot be closed when the sunroof glass is opened. The sunroof glass cannot slide open and tilt open at the same time. You cannot tilt the sunroof glass open while the sunroof glass is slide open. Also, you cannot slide the sunroof glass open while the sunroof is tilt open. Slide open or tilt open with the sunroof glass when the sunroof glass is completely closed. NOTICE Do not pull the sunshade up or down, or apply excessive force as such action may damage the sunshade or cause it to malfunction. OFE042028L 1. Tilt open 2. Tilt close • Push the sunroof switch upward, the sunroof glass tilts open. • Push the sunroof switch forward when the sunroof glass is tilt opened, the sunroof glass closes. To stop the sunroof movement at any point, push the sunroof switch in any direction. 3-38 Slide open/close • Push the sunroof switch rearward, the sunshade and sunroof glass slide open. Push the sunroof switch forward, only the sunroof glass closes. • Push the sunroof switch forward or rearward to the first detent position, the sunroof glass moves until the switch is released. i Information To reduce wind noise while driving, we recommend that you drive at the recommended position before the maximum slide open position. Automatic Reversal 3 ODH043039 If the sunroof glass senses any obstacle while it is closing automatically, it will reverse direction then stop at a certain position. The auto reverse function may not work if an object thin or soft is caught between the sliding sunroof glass and sunroof sash. 3-39 Convenience features of your vehicle OFE042027L • Push the sunroof switch forward or rearward to the second detent position, the sunroof glass operates automatically (auto slide feature). To stop the sunroof movement at any point, push the sunroof switch in any direction. • The sunroof glass stops halfway (first detent position) before it is fully opened. To fully open the sunroof glass, push the sunroof switch rearward once more. At this time, the sunroof glass opens only while the switch is pushed. Convenience features of your vehicle WARNING Make sure heads, hands, arms or any other body parts or objects are out of the way before operating the sunroof. Body parts or objects may get caught causing injuries or vehicle damage. Never deliberately use your body parts to test the automatic reversal function. The sunroof glass may reverse direction, but there is a risk of injury. 3-40 NOTICE • Do not continue to push the sunroof switch after the sunroof is fully opened, closed, or tilted. Damage to the sunroof motor could occur. • Continuous operations such as slide open/close, tilt open/close, etc. may cause the motor or sunroof system to malfunction. • Regularly remove any accumulated dust on the sunroof rail. • Dust accumulated between the sunroof and roof panel can make noise. Open the sunroof and remove dust regularly using a clean cloth. • Do not try to open the sunroof when the temperature is below freezing or when the sunroof is covered with snow or ice. The sunroof may not work properly and may break if opened by force. • Do not open or drive with the sunroof glass open immediately after rain or washing the vehicle. Water may wet the interior of the vehicle. • Do not extend any luggage outside the sunroof while driving. Vehicle damage may occur if the vehicle suddenly stops. WARNING Do not extend your head, arms, body parts or objects outside the sunroof while driving. Injuries may occur if the vehicle suddenly stops. Resetting the sunroof Sunroof resetting procedure: 1. It is recommended to perform the reset procedure with the vehicle engine running. Start the vehicle in P (Park). 2. Make sure the sunroof glass is in the fully closed position. If the sunroof glass is open, push the switch forward until the sunroof glass is fully closed. 3. Release the switch when the sunroof glass is fully closed. 4. Push the switch forward until the sunroof glass moves slightly. Then release the switch. Sunroof Open Warning 3 i Information If the sunroof is not reset when the vehicle battery is disconnected or discharged, or the sunroof fuse is blown, the sunroof may not operate normally. OFE040111 If the driver turns off the engine when the sunroof is not fully closed, the warning chime will sound for several seconds and the sunroof open warning will appear on the cluster LCD display. Close the sunroof securely when leaving your vehicle. CAUTION Make sure the sunroof is closed fully when leaving your vehicle. If the sunroof is left open, rain or snow may wet the interior of the vehicle. Also, leaving the sunroof open when the vehicle is unattended may invite theft. 3-41 Convenience features of your vehicle In some circumstances resetting the sunroof operation may need to be performed. Some instances where resetting the sunroof may be required include: • When the 12-volt battery is either disconnected or discharged • When the sunroof fuse is replaced • If the sunroof one-touch AUTO OPEN/CLOSE operation is not functioning properly 5. Once again push and hold the sunroof switch forward until the sunroof glass slides open and close. Do not release the switch until the operation is completed. If you release the switch during operation, start the procedure again from step 2. Convenience features of your vehicle EXTERIOR FEATURES Closing the hood Hood Opening the hood OFE048030N OFE048029 1. Park the vehicle and set the parking brake. 2. Pull the release lever to unlatch the hood. The hood should pop open slightly. 3-42 3. Go to the front of the vehicle, raise the hood slightly, push up the secondary latch (1) inside of the hood center and lift the hood (2). After it has been raised about halfway, it will raise completely by itself. 1. Before closing the hood, check the following: • All filler caps in fuel cell power module compartment must be correctly installed. • Gloves, rags or any other combustible material must be removed from the fuel cell power module compartment. 2. Lower the hood halfway (lifted approximately 12 inches (30 cm) from the closed position) and push down to securely lock in place. Then double check to be sure the hood is secure. If the hood can be raised slightly, it is not securely locked. Open it again and close it with more force. WARNING • Before closing the hood, 3. With the Smart Key in your possession, press the liftgate handle switch and open the liftgate. Closing the liftgate 3 OFE048032 Before attempting to open the liftgate, make sure the vehicle is in P (Park). To open the liftgate, perform one the following: 1. Unlock all doors with the Door Unlock button on your smart key. From outside press the liftgate handle switch and open the liftgate. 2. Press and hold the Liftgate Unlock button on the smart key. From outside press the liftgate handle switch and open the liftgate. OFE048033 Lower the liftgate lid and press down until it locks. To be sure the liftgate lid is securely fastened, always check by trying to pull it up again without pressing the liftgate handle switch. i Information In cold and wet climates, door lock and door mechanisms may not work properly due to freezing conditions. 3-43 Convenience features of your vehicle ensure all obstructions are removed from around the hood opening. • Always double check to be sure that the hood is firmly latched before driving away. Check there is no hood open warning light or message displayed on the instrument cluster. Driving with the hood opened may cause a total loss of visibility, which might result in an accident. • Do not move the vehicle with the hood in the raised position, as vision is obstructed, which might result in an accident, and the hood could fall or be damaged. Non-Powered Liftgate (if equipped) Opening the liftgate Convenience features of your vehicle WARNING Emergency liftgate safety release WARNING The liftgate swings upward. Make sure no objects or people are near the rear of the vehicle when opening the liftgate. NOTICE Make certain that you close the liftgate before driving your vehicle. Possible damage may occur to the liftgate struts and mounting hinges if the liftgate is not closed prior to driving. WARNING Always keep the liftgate completely closed while the vehicle is in motion. If it is left open or ajar, poisonous exhaust gases containing carbon monoxide (CO) may enter the vehicle and serious illness or death may result. 3-44 OFE048035 OFE048034 Do not hold on to or try to pull on the liftgate strut. Be aware that the deformation of the liftgate strut may cause vehicle damage and risk of injury. Your vehicle is equipped with an emergency liftgate safety release lever located on the bottom of the liftgate inside the vehicle. To unlock and open the liftgate manually from inside the luggage compartment, perform the following steps: 1. Remove the cover. 2. Push the release lever to the right. 3. Push the liftgate outward and upward. WARNING Power Liftgate (if equipped) Power liftgate button • Be aware of the location of the OFE048471L Power liftgate setting When the POWER button is in the ON position and the shift button is in P (Park), the power liftgate can be opened by using the console button on the dash. Before using the power liftgate, make sure the power liftgate option is selected in the Vehicle Setting modes in the Infotainment system LCD display. 'Vehicle Settings → Door/Liftgate → Power Liftgate' For more details, refer to the separately supplied Navigation manual. i Information The power liftgate operates only when the shift button is in P (Park). 3-45 3 Convenience features of your vehicle emergency liftgate safety release lever in your vehicle and know how to open the liftgate using the safety release lever. • No one should be allowed to occupy the luggage compartment of the vehicle at any time. The luggage compartment is a very dangerous location in the event of a crash. • Use the release lever for emergencies only. Use extreme caution, especially while the vehicle is in motion. Also, the speed of the power liftgate can be adjusted in the Vehicle Settings mode in the Infotainment system LCD display. 'Vehicle Settings → Door/Liftgate → Power Liftgate Speed → Fast/Slow' - If the power liftgate function turns off or the liftgate is not fully closed, you cannot adjust the power liftgate speed. - Initial speed of power liftgate is set as "Fast". Convenience features of your vehicle WARNING Never leave children unattended in your vehicle. Children might operate the power liftgate. Doing so could result in injury to themselves or others, and could damage the vehicle. Opening the liftgate The power liftgate will open automatically by doing one of the following: WARNING OFE048037 Make sure there are no people or objects around the liftgate before operating the power liftgate. Wait until the liftgate is opened fully and stopped before loading or unloading cargo or passengers from the vehicle. NOTICE Do not close or open the power liftgate manually. This may cause damage to the power liftgate. If it is necessary to close or open the power liftgate manually when the battery is discharged or disconnected, do not apply excessive force. 3-46 OFE048036 Smart key liftgate unlock button Press and hold the liftgate unlock button on the smart key. Power liftgate handle switch Press the liftgate outside handle switch while having the smart key with you. Closing the liftgate The power liftgate will close automatically by doing one of the following: 3 OFE048040 Power liftgate inner button Press the power liftgate inner button for approximately 1 second. The liftgate will close and lock automatically. In order to suddenly stop the movement of the liftgate while it is operating, quickly press the power liftgate button. OFE048036 Smart key liftgate unlock button Press and hold the liftgate unlock button on the smart key when the liftgate is opened. The liftgate will close and lock automatically. 3-47 Convenience features of your vehicle OFE048471L Power liftgate button Press the power liftgate button for approximately one second. Convenience features of your vehicle Power liftgate non-opening conditions The power liftgate does not open when the vehicle is in motion. WARNING OFE048471L Power liftgate button Press the power liftgate button for approximately one second. In order to suddenly stop the movement of the liftgate while it is operating, quickly press the power liftgate button. In order to suddenly stop the movement of the liftgate while it is operating, quickly press the power liftgate button. 3-48 The chime will sound if you drive with the liftgate opened. Stop your vehicle immediately at a safe place and check if your liftgate is opened. CAUTION Operating the power liftgate more than 5 times continuously could cause damage to the operating motor. In this case, the power liftgate system enters into thermal protection mode to prevent the motor from overheating. In thermal protection mode the power liftgate will not operate. If any of the power liftgate buttons are pressed to try to open the liftgate, the chime will sound 3 times but the liftgate will remain closed. Allow the power liftgate system to cool for about 1 minute before operating the system again. NOTICE If the automatic reversal feature operates more than 2 times while attempting to open or close the liftgate, the power liftgate may stop at that position. If this occurs, carefully close the liftgate manually, and then try to operate the power liftgate automatically again. WARNING OFE048039 During power opening and closing if the power liftgate is blocked by an object or part of the body, the power liftgate will detect the resistance. If resistance is detected while opening or closing the power liftgate, the liftgate will stop and move in the opposite direction. However, in some instances the automatic reversal system may not detect the object if it is too soft or is very thin, or if the liftgate is almost fully closed near the latched position. Caution should be taken to prevent any objects from obstructing the liftgate opeining. Never intentionally place any object or part of your body in the path of the power liftgate to make sure the automatic reversal operates. CAUTION Do not put heavy objects on the power liftgate before you operate the power liftgate feature. Additional weight may damage the operation of the system. 3-49 3 Convenience features of your vehicle • The power liftgate can be operated when the vehicle is not running. However, the power liftgate operation consumes a large amount of electic power. To prevent the battery from being discharged, do not operate it excessively (e.g. more than 5 times repeatedly). • To prevent the battery from being discharged, do not leave the power liftgate in the open position for a long time. • Do not modify or repair any part of the power liftgate by yourself. This must be done by an authorized HYUNDAI dealer. • When jacking up the vehicle to change a tire or repair the vehicle, do not operate the power liftgate. This could cause the power liftgate to operate improperly. • In cold and wet climates, the power liftgate may not work properly due to freezing conditions. Automatic reversal Convenience features of your vehicle How to reset the power liftgate If the battery has been discharged or disconnected, or if the power liftgate fuse has been replaced or removed, reset the power liftgate by performing the following procedure: 1. Put the shift button in P (Park). 2. Press the power liftgate inner button and the power liftgate outer handle button simultaneously for more than 3 seconds. The chime will sound. 3. Close the liftgate manually. If the power liftgate does not work properly after the above procedure, have the system checked by an authorized HYUNDAI dealer. NOTICE When operating the power liftgate, the gear shift button must be in the (P) park position in order to operate normally. i Information If the liftgate is stopped before the tailgate is fully open, resetting will not proceed. Wait until the tailgate is fully open. 3-50 Power liftgate opening height user setting WARNING Always keep the liftgate completely closed while the vehicle is in motion. If it is left open or ajar, poisonous exhaust gases containing carbon monoxide (CO) may enter the vehicle and serious illness or death may result. WARNING OFE048040 Follow the instructions below to set the fully open height of the power liftgate: 1. Position the liftgate manually to the height you prefer. 2. Press the power liftgate inner button for more than 3 seconds. 3. Close the liftgate manually after hearing the buzzer sound. The liftgate will open to the manually adjusted height that was set. Rear cargo area Occupants should never ride in the rear cargo area where no restraints are available. To avoid injury in the event of an accident or sudden stops, occupants should always be properly restrained. Emergency liftgate safety release WARNING Smart Liftgate (if equipped) • Be aware of the location of the Your vehicle is equipped with an emergency liftgate safety release lever located on the bottom of the liftgate inside the vehicle. To unlock and open the liftgate manually from inside the luggage compartment, perform the following steps: 1. Remove the cover. 2. Push the release lever to the right. 3. Push the liftgate outward and upward. 3 OFE048041 On vehicles equipped with a smart key, the liftgate can be opened with hands-free activation using the Smart Liftgate system. 3-51 Convenience features of your vehicle OFE048034 emergency liftgate safety release lever in your vehicle and know how to open the liftgate using the safety release lever. • No one should be allowed to occupy the luggage compartment of the vehicle at any time. The luggage compartment is a very dangerous location in the event of a crash. • Use the release lever for emergencies only. Use extreme caution, especially while the vehicle is in motion. Convenience features of your vehicle How to use the Smart Liftgate The hands-free smart liftgate system can be opened automatically when the following conditions are met: • The Smart Liftgate option is enabled in the User Settings in the Infotainment system screen. • The Smart Liftgate is activated and ready 15 seconds after all the doors are closed and locked • The Smart Liftgate will open when the smart key is detected in the area behind the vehicle for 3 seconds i Information The Smart Liftgate will NOT operate when: • Any door is open, or all doors are closed but not locked • The smart key is detected within 15 seconds from when the doors were closed and locked • For vehicles equipped with illuminated exterior front door handles, if the smart key is detected within 15 seconds from when the doors were closed and locked or if the smart key is within 60 inches (1.5m) from the front door handles • The smart key is in the vehicle. 1. Setting To activate the Smart Liftgate, go to "Vehicle settings → Door/Tailgate" and select Smart Tailgate (Liftgate) on the Infotainment system screen. For more information refer to the separately supplied Navigation manual. 2.Detect and Alert The Smart Liftgate detecting area extends approximately 20-40 in (50100 cm) behind the vehicle. If you are positioned in the detecting area and are carrying the smart key, the hazard warning lights will blink and the chime will sound to alert you that the smart liftgate will open. i Information Do not approach the detecting area if you do not want the liftgate to open. If you have unintentionally entered the detecting area and the hazard warning lights and chime starts to operate, move away from the area behind the vehicle with the smart key. The liftgate will remain closed. 3-52 3. Automatic opening After the hazard warning lights blink and the chime sounds 6 times, the power liftgate will open. WARNING • The key should be kept out of reach of children. Children may inadvertently open the Smart Liftgate while playing around the rear area of the vehicle. How to deactivate the Smart Liftgate function using the smart key 3 • Make certain that you close OFE048005 1. Door lock 2. Door unlock 3. Liftgate open 4. Panic If you press any button on the smart key during the Detect and Alert stage, the Smart Liftgate function will be deactivated. Make sure to be aware of how to deactivate the Smart Liftgate function for emergency situations. 3-53 Convenience features of your vehicle the liftgate before driving your vehicle. • Make sure there are no people or objects around the liftgate before opening or closing the liftgate. • Make sure objects in the rear cargo area do not come out when opening the liftgate, especially if the vehicle is parked on a grade or incline. • If you keep your vehicle parked and locked on your driveway, you may want to temporarily deactivate the Smart Liftgate system. Otherwise, standing at the rear of the vehicle with the smart key may cause the liftgate to open unintentionally. Convenience features of your vehicle i Information • If you press the door unlock button (2), the Smart Liftgate function will be deactivated temporarily. But, if you do not open any door for 30 seconds, the Smart Liftgate function will be activated again. • If you press the liftgate open button (3) for more than 1 second, the liftgate opens. • The Smart Liftgate function will still be activated if you press the door lock button (1) or liftgate open button (3) on the smart key as long as the Smart Liftgate is not already in the Detect and Alert stage. • In case you have deactivated the Smart Liftgate function by pressing the smart key button and opened a door, the Smart Liftgate function can be activated again by closing and locking all doors. 3-54 Detecting area i Information OFE048042N • The Smart Liftgate detecting area extends approximately 20-40 in (50-100 cm) behind the vehicle. If you are positioned in the detecting area and are carrying the smart key, the hazard warning lights will blink and the chime will sound for about 3 seconds to alert you that the smart liftgate will open. • The alert stops once the smart key is moved outside of the detecting area within the 3 second period. • The Smart Liftgate function may not operate properly if any of the following instances occur: - The smart key is close to a radio transmitter such as a radio station or an airport which can interfere with normal operation of the transmitter. - The smart key is near a mobile two way radio system or a cellular phone. - Another vehicle's smart key is being operated close to your vehicle. • The Smart Liftgate detecting area may change when: - The vehicle is parked on an incline or slope - One side of the vehicle is raised or lowered relative to the opposite side Closing the fuel filler door Fuel Filler Door Opening the fuel filler door 1. Cover the fuel filler with the cap. 2. Close the fuel filler door until it is latched securely. WARNING • If the fuel filler cap requires OFE039063L 1. Turn the vehicle off. 2. Push the fuel filler door opener button. NOTICE • The fuel filler door does not open if the vehicle is not off. • The fuel filler door may open after several seconds from turning off the vehicle. However, in cold weather, the fuel door may not open for about 45 seconds until the cluster message "Powering down..." disappears. This is for protecting the fuel cell system. i Information If the fuel filler door does not open because ice has formed around it, tap lightly or push on the door to break the ice and release the door. Do not pry on the door. If necessary, spray around the door with an approved deicer fluid (do not use radiator antifreeze) or move the vehicle to a warm place and allow the ice to melt. 3-55 Convenience features of your vehicle OFEQ018015N 3. Pull the fuel filler door (1) outward to access the fuel filler cap. 4. Pull the fuel filler cap (2). replacement, you should use parts for replacement from an authorized Hyundai dealer. An incorrect fuel filler cap can result in a serious malfunction of the fuel system or emission control system. you should contact your HYUNDAI dealer for replacement. • If the fuel filler door is not completely closed, the vehicle is not turned on. Close the fuel filler door and turn on the vehicle. 3 Convenience features of your vehicle WARNING Refueling dangers Automotive fuels are flammable materials. When refueling, please note the following guidelines carefully. Failure to follow these guidelines may result in severe personal injury, severe burns or death by fire or explosion. • Read and follow all warning posted at the gas station facility. • Before touching the fuel nozzle, you should eliminate potentially dangerous static electricity discharge by touching another metal part of the vehicle, a safe distance away from the fuel filler neck, nozzle, or other gas source. 3-56 • Do not get back into a vehicle • When refueling, always shut once you have begun refueling since you can generate static electricity by touching, rubbing or sliding against any item or fabric (polyester, satin, nylon, etc.) capable of producing static electricity. Static electricity discharge can ignite fuel vapors resulting in rapid burning. If you must reenter the vehicle, you should once again eliminate potentially dangerous static electricity discharge by touching a metal part of the vehicle, away from the fuel filler neck, nozzle or other gasoline source. • Do not use cellular phones while refueling. Electric current and/or electronic interference from cellular phones can potentially ignite fuel vapors causing a fire. the power off. Once refueling is complete, check to make sure the filler cap and filler door are securely closed, before starting the vehicle. • DO NOT use matches or a lighter and DO NOT SMOKE or leave a lit cigarette in your vehicle while at a gas station especially during refueling. Automotive fuel is highly flammable and can, when ignited, result in fire. • If a fire breaks out during refueling, leave the vicinity of the vehicle, and immediately contact the manager of the gas station and then contact the local fire department. Follow any safety instructions they provide. Emergency Fuel Filler Door Release 3 Convenience features of your vehicle OFE048419 If the fuel filler door does not open due to the battery discharge and failure of the electrical wiring, open the liftgate and lightly pull the handle towards the arrow direction to open the lid. i Information Do not pull the handle excessively, otherwise the luggage area trim or release handle may be damaged. 3-57 Convenience features of your vehicle INSTRUMENT CLUSTER 1. Power gauge 2. Speedometer 3. Fuel cell stack temperature gauge 4. Fuel gauge 5. Warning and indicator lights 6. Odometer/LCD display/Trip computer The actual cluster in the vehicle may differ from the illustration. For more details, refer to the "Gauges and Meters" in this chapter. OFE041480N 3-58 Instrument Cluster Control Adjusting instrument cluster illumination When the vehicle's position lights or headlights are on, press the illumination control button to adjust the brightness of the instrument panel illumination. When pressing the illumination control button, the interior switch illumination intensity is also adjusted. Gauges and Meters Speedometer Never adjust the instrument cluster while driving. Doing so could lead to driver distraction which may cause an accident and lead to vehicle damage, serious injury, or death. • The brightness of the instrument panel illumination is displayed. • If the brightness reaches the maximum or minimum level, a chime will sound. 3 OFE041481N The speedometer indicates the speed of the vehicle and is calibrated in miles per hour (MPH) and/or kilometers per hour (km/h). 3-59 Convenience features of your vehicle OFE049043L WARNING Convenience features of your vehicle Power gauge • POWER : It shows the energy consumption rate of the vehicle when driving uphill or accelerating. The more electric energy is used, the higher the gauge level. Fuel cell stack temperature gauge OFE041102N The power gauge shows the energy consumption rate of the traction motor. • CHARGE : It shows the charging status of the battery when it is being charged by the regenerative brakes (decelerating or driving on a downhill road). The more electric energy is charged, the lower the gauge level. • ECO : It shows the energy consumption rate during normal driving condition. 3-60 OFE041103N This gauge shows the temperature of the fuel cell stack coolant when the POWER button is ON. Do not continue driving with an overheated fuel cell stack. If your vehicle overheats, have the vehicle inspected by an authorized HYUNDAI dealer. NOTICE - Fuel Cell Stack Hydrogen fuel gauge WARNING Overheats If the gauge pointer moves beyond the normal range area toward the "H" position, it indicates overheating that may damage the fuel cell stack. Running Out of Fuel WARNING Radiator Cap Never remove the radiator cap when the fuel cell power module is hot. Otherwise the fuel cell stack coolant may be under pressure and cause severe burns. Wait until the fuel cell power module is cool before adding coolant to the reservoir. OFE041133N This gauge indicates the approximate amount of fuel remaining in the fuel tank (The fuel tank capacity is given in chapter 8). The fuel gauge is supplemented by a low fuel warning light which will illuminate when the fuel tank is nearly empty. i Information - Hydrogen Fueling Station According to the hydrogen fueling station condition, the hydrogen fuel may not filled fully. 3-61 3 Convenience features of your vehicle Running out of fuel can expose vehicle occupants to danger. You must stop and obtain additional fuel as soon as possible after the warning light comes on or when the gauge indicator comes close to the ''E'' (Empty) level. Convenience features of your vehicle Outside temperature gauge The temperature unit (from °C to °F or from °F to °C) can be changed by: - Press the AUTO button while pressing the OFF button on the climate control unit for 3 seconds - Go to General settings mode → Unit → Temperature in the Infotainment system display. Both the temperature unit on the cluster LCD display and climate control screen will change. Odometer OFE041104N OFE041106N This gauge indicates the current outside air temperature by 1 degrees F (1 degrees C). - Temperature range : -40°F ~ 140°F (-40°C ~ 60°C) Note that the temperature indicated on the LCD display may not change as quickly as the outside temperature (there may be a slight delay before the temperature changes.) The odometer indicates the total distance that the vehicle has been driven and should be used to determine when periodic maintenance should be performed. 3-62 Range i Information • The range is the estimated distance the vehicle can be driven with the remaining fuel. • If the estimated distance is below 1 mi. (1 km), the trip computer will display "---" as range. • If the hydrogen supply line is empty, the gauge may indicate that the hydrogen is not in the hydrogen tank. 3 OCN7040013N This indicator displays which gear is selected. 3-63 Convenience features of your vehicle OFE041482N • If the vehicle is not on level ground or the battery power has been interrupted, the range function may not operate correctly. • The range may differ from the actual driving distance as it is only an estimate of the available driving range for the vehicle and driving conditions. • The range may vary significantly based on driving conditions, driving habits, and condition of the vehicle. Gear shift indicator Convenience features of your vehicle Regenerative braking rate indicator Icy road warning light (if equipped) i Information If the icy road warning light appears while driving, you should drive more attentively and safely refraining from over-speeding, rapid acceleration, sudden braking or sharp turning, etc. OFE051018N OFE041149N While using the regenerative brakes, you may select the regenerative braking rate from 0 to 3 by pulling the paddle shifter. For more details, refer to "Regenerative Braking System" in chapter 5. This warning light is to warn the driver the road may be icy. When the temperature on the outside temperature gauge is approximately below 40°F (4°C), the Icy Road Warning Light and Outside Temperature Gauge blinks, and then illuminates. Also, the warning chime is sound. 3-64 Warning and Indicator lights Service Warning Light Power Down Warning Light This warning light illuminates : • When the POWER button is in the ON position. - It illuminates for approximately 3 seconds and then goes off. • When there is a problem with related parts of the fuel cell electric vehicle control system, such as sensors, etc. This warning light illuminates : • When the vehicle power should be limited due to a malfunction with fuel cell stack. If the warning light continuously remains on when the vehicle is in "READY" state, or comes on during driving, this indicates that there may be a malfunction with the fuel cell stack. If this occurs, we recommend that you have the vehicle inspected by an authorized HYUNDAI dealer. i Information Make sure that all warning lights are OFF after starting the vehicle. If any light is still ON, this indicates a situation that needs attention. This indicator illuminates : When the vehicle is ready to be driven. - ON : Normal driving is possible. - OFF : Normal driving is not possible, or a problem has occurred. - Blinking : Emergency driving. When the ready indicator goes OFF or blinks, there is a problem with the system. In this case, have your vehicle inspected by an authorized HYUNDAI dealer. When the warning light illuminates while driving, or does not go OFF after starting the vehicle, have your vehicle inspected by an authorized HYUNDAI dealer. NOTICE If the warning light turns on again when restarting the vehicle after parking your vehicle on an incline. 3-65 Convenience features of your vehicle Ready Indicator 3 Convenience features of your vehicle Icy Road Warning Light (if equipped) Hydrogen Gas Leak Warning Light Low Fuel Level Warning Light This warning light is to warn the driver the road may be icy. When the temperature on the outside temperature gauge is approximately below 40°F (4°C), the Icy Road Warning Light and Outside Temperature Gauge blinks and then illuminates. Also, the warning chime sounds 1 time. The Icy Road Warning function can be activated or deactivated from the Vehicle Settings mode in the Infotainment system screen. This warning light illuminates: • [Red] When the hydrogen leakage is detected in the vehicle. • [Yellow] When there is a malfunction with the hydrogen leakage detection sensor. This warning light illuminates: When the fuel tank is nearly empty. i Information If the icy road warning light appears while driving, you should drive more attentively and safely, refraining from over-speeding, rapid acceleration, sudden braking or sharp turning, etc. 3-66 If the warning light continuously remains on when the vehicle is in "READY" state, or comes on during driving, this indicates that there may be hydrogen leakage or a malfunction with the hydrogen leakage detection sensor. If this occurs, stop the vehicle and have the hydrogen system inspected by an authorized HYUNDAI dealer. If the fuel tank is nearly empty: Add fuel as soon as possible. Supplemental Restraint System Warning Light Seat Belt Warning Light Regenerative Brake Warning Light (yellow) This warning light informs the driver that the seat belt is not fastened. For more details, refer to the "Seat Belts" in chapter 2. This warning light illuminates : When the regenerative brake does not operate and the brake does not perform well. This causes the Brake Warning light (red) and Regenerative Brake Warning Light (yellow) to illuminate simultaneously. In this case, drive safely and have your vehicle inspected by an authorized HYUNDAI dealer. The operation of the brake pedal may be more difficult than normal and the braking distance can increase. 3-67 3 Convenience features of your vehicle This warning light illuminates: • When the POWER button is in the ON position. - It illuminates for approximately 6 seconds and then goes off. • When there is a malfunction with the SRS. In this case, have your vehicle inspected by an authorized HYUNDAI dealer. Convenience features of your vehicle Parking Brake & Brake Fluid Warning Light This warning light illuminates: • When the POWER button is in the ON position. - It illuminates for approximately 3 seconds. - It remains on if the parking brake is applied. • When the parking brake is applied. • When the brake fluid level in the reservoir is low. - If the warning light illuminates with the parking brake released, it indicates the brake fluid level in reservoir is low. 3-68 If the brake fluid level in the reservoir is low: 1. Drive carefully to the nearest safe location and stop your vehicle. 2. With the vehicle turned off, check the brake fluid level immediately and add fluid as required (For more details, refer to "Brake Fluid" in chapter 7). After adding brake fluid, check all brake components for fluid leaks. If a brake fluid leak is found, or if the warning light remains on, or if the brakes do not operate properly, do not drive the vehicle. Have the vehicle inspected by an authorized HYUNDAI dealer. Dual-diagonal braking system Your vehicle is equipped with dualdiagonal braking systems. This means you still have braking on two wheels even if one of the dual systems should fail. With only one of the dual systems working, more than normal pedal travel and greater pedal pressure is required to stop the vehicle. Also, the vehicle will not stop in as short a distance with only a portion of the brake system working. WARNING Parking Brake & Brake Fluid Warning Light Driving the vehicle with a warning light ON is dangerous. If the Parking Brake & Brake Fluid Warning Light illuminates with the parking brake released, it indicates that the brake fluid level is low. In this case, have your vehicle inspected by an authorized HYUNDAI dealer. Electronic Brake Force Distribution (EBD) System Warning Light This warning light illuminates: • When the POWER button is in the ON position. - It illuminates for approximately 3 seconds and then goes off. • When there is a malfunction with the ABS (The normal braking system will still be operational without the assistance of the anti-lock brake system). In this case, have your vehicle inspected by an authorized HYUNDAI dealer. These two warning lights illuminate at the same time while driving: When the ABS and regular brake system may not work normally. In this case, have your vehicle inspected by an authorized HYUNDAI dealer. WARNING i Information - Electronic Brake Force Distribution (EBD) System Warning Light When the ABS Warning Light is on or both ABS and Parking Brake & Brake Fluid Warning Lights are on, the speedometer, odometer, or tripmeter may not work. Also, the MDPS Warning Light may illuminate and the steering effort may increase or decrease. In this case, have your vehicle inspected by an authorized HYUNDAI dealer. Electronic Brake Force Distribution (EBD) System Warning Light When both ABS and Parking Brake & Brake Fluid Warning Lights are on, the brake system will not work normally and you may experience an unexpected and dangerous situation during sudden braking. In this case, avoid high speed driving and abrupt braking. In this case, have your vehicle inspected by an authorized HYUNDAI dealer. 3-69 3 Convenience features of your vehicle Anti-lock Brake System (ABS) Warning Light Convenience features of your vehicle Motor Driven Power Steering (MDPS) Warning Light Charging System Warning Light (for 12-volt battery) Low Tire Pressure Warning Light This warning light illuminates: • When the POWER button is in the ON position. - It illuminates for approximately 3 seconds and then goes off. • When there is a malfunction with the MDPS. In this case, have your vehicle inspected by an authorized HYUNDAI dealer. This warning light illuminates: • When the 12-volt battery level is low or a failure occurs on the charging system such as LDC. • If the warning light turns on while driving, move the vehicle to a safe location, turn off and turn on the vehicle again, and check if the warning light turns off. If the warning light remains on, have the vehicle inspected by an authorized HYUNDAI dealer. • Even if the warning light turns off, have the vehicle inspected by an authorized HYUNDAI dealer. If you drive the vehicle while the warning light is on, vehicle speed may be limited and the 12-volt battery may be discharged. This warning light illuminates: • When the POWER button is in the ON position. - It illuminates for approximately 3 seconds and then goes off. • When one or more of your tires are significantly underinflated (The location of each underinflated tire is displayed on the LCD display). ❈ LDC : Low voltage DC-DC Converter. 3-70 For more details, refer to "Tire Pressure Monitoring System (TPMS)" in chapter 6. This warning light remains ON after blinking for approximately 60 seconds, or repeatedly blinks ON and OFF in 3 second intervals: When there is a malfunction with the TPMS. In this case, have your vehicle inspected by an authorized HYUNDAI dealer. WARNING Safe Stopping • The TPMS cannot alert you to severe and sudden tire damage caused by external factors. • If you notice any vehicle instability, immediately take your foot off the accelerator pedal, apply the brakes gradually with light force, and slowly move to a safe position off the road. EPB This warning light illuminates: • When the POWER button is in the ON position. - It illuminates for approximately 3 seconds and then goes off. • When there is a malfunction with the EPB. In this case, have the vehicle inspected by an authorized HYUNDAI dealer. i Information The Electronic Parking Brake (EPB) Warning Light may illuminate when the Electronic Stability control (ESC) Indicator Light comes on to indicate that the ESC is not working properly (This does not indicate malfunction of the EPB). AUTO HOLD Indicator Light This indicator light illuminates: • [White] When you activate the auto hold system by pressing the AUTO HOLD switch. • [Green] When you stop the vehicle completely by depressing the brake pedal with the auto hold system activated. • [Yellow] When there is a malfunction with the auto hold system. In this case, have the vehicle inspected by an authorized HYUNDAI dealer. For more details, refer to "Auto Hold" in chapter 5. 3-71 3 Convenience features of your vehicle For more details, refer to "Tire Pressure Monitoring System (TPMS)" in chapter 6. Electronic Parking Brake (EPB) Warning Light Convenience features of your vehicle Forward Collision Avoidance Assist (FCA) system warning light (if equipped) This warning light illuminates : • When the POWER button is in the ON position. - It illuminates for approximately 3 seconds and then goes off. • When the FCA system is turned off. • When the radar sensor or cover is blocked with dirt or snow. Check the sensor and cover and clean them by using a soft cloth. • When there is a malfunction with FCA. In this case, have your vehicle inspected by an authorized HYUNDAI dealer. Lane Keeping Assist (LKA) system indicator light (if equipped) LED Headlight Warning Light (if equipped) This indicator light illuminates: • [Green] When the system operating conditions are satisfied for LKA. • [White] When system operating conditions are not satisfied or when the sensor does not detect the lane line. • [Yellow] When there is a malfunction with the Lane Keeping Assist (LKA) system. In this case, have your vehicle inspected by an authorized HYUNDAI dealer. This warning light illuminates: • When the POWER button is in the ON position. - It illuminates for approximately 3 seconds and then goes off. • When there is a malfunction with the LED headlight. In this case, have the vehicle inspected by an an authorized HYUNDAI dealer. For more details, refer to "Lane Keeping Assist (LKA) system" in chapter 5. This warning light blinks: When there is a malfunction with a LED headlight related part. In this case, have the vehicle inspected by an an authorized HYUNDAI dealer. NOTICE Continuous driving with the LED Headlight Warning Light on or blinking can reduce LED headlight life. 3-72 Electronic Stability Control (ESC) Indicator Light Electronic Stability Control (ESC) OFF Indicator Light This warning light illuminates: When there is a malfunction in operation in any of the following systems: - Forward Collision-Avoidance Assist malfunction (if equipped) - Forward Collision-Avoidance Assist radar blocked (if equipped) - Blind-Spot Collision Warning malfunction (if equipped) - Blind-Spot Collision Warning radar blocked (if equipped) - LED headlamp malfunction (if equipped) - High Beam Assist malfunction (if equipped) - Smart Cruise Control malfunction (if equipped) - Smart Cruise Control radar blocked (if equipped) - Tire Pressure Monitoring System (TPMS) malfunction To identify the details of the warning, look at the LCD display. This indicator light illuminates: • When the POWER button is in the ON position. - It illuminates for approximately 3 seconds and then goes off. • When there is a malfunction with the ESC system. In this case, have your vehicle inspected by an authorized HYUNDAI dealer. This indicator light illuminates: • When the POWER button is in the ON position. - It illuminates for approximately 3 seconds and then goes off. • When you deactivate the ESC system by pressing the ESC OFF button. For more details, refer to "Electronic Stability Control (ESC)" in chapter 5. This indicator light blinks: While the ESC is operating. For more details, refer to "Electronic Stability Control (ESC)" in chapter 5. 3-73 3 Convenience features of your vehicle Master Warning Light Convenience features of your vehicle Immobilizer Indicator Light This indicator light illuminates for up to 30 seconds: When the vehicle detects the smart key in the vehicle with the POWER button in the ACC or ON position. - At this time, you can start the vehicle. - The indicator light goes off after starting the vehicle. This indicator light blinks for a few seconds: When the smart key is not in the vehicle. - At this time, you cannot start the vehicle. 3-74 This indicator light illuminates for 2 seconds and goes off: If the smart key is in the vehicle and the POWER button is ON, but the vehicle cannot detect the smart key. In this case, have your vehicle inspected by an authorized HYUNDAI dealer. Turn Signal Indicator Light This indicator light blinks: • When the battery voltage of the smart key is low. - At this time, you can not start the vehicle. However, you can start the if you press the POWER button with the smart key. (For more details, refer to "Starting the vehicle" in chapter 5). • When there is a malfunction with the immobilizer system. In this case, have your vehicle inspected by an authorized HYUNDAI dealer. If any of the following occurs, there may be a malfunction with the turn signal system. - The turn signal indicator light illuminates but does not blink - The turn signal indicator light blinks rapidly - The turn signal indicator light does not illuminate at all If either of these conditions occur, have your vehicle inspected by an authorized HYUNDAI dealer. This indicator light blinks: When you operate the turn signal indicator. Light ON Indicator Light ECO Mode Indicator Light This indicator light illuminates: • When the headlights are on and in the high beam position. • When the turn signal lever is pulled into the Flash-to-Pass position. This indicator light illuminates: When the tail lights or headlights are on. This indicator light illuminates : When you select "ECO" mode as drive mode. For more details, refer to "Drive Mode Integrated Control System" in this chapter. 3-75 3 Convenience features of your vehicle High Beam Indicator Light Convenience features of your vehicle LCD Display Messages Shift to P Press POWER button while turning wheel This warning message is displayed if you try to turn off the vehicle with the gear in the N (Neutral) position. At this time, the POWER button changes to the ACC position (If you press the POWER button once more, it will turn to the ON position). This warning message is displayed if the steering wheel does not unlock normally when the POWER button is pressed. You should press the POWER button while turning the steering wheel right and left. Low Key Battery Check Steering Wheel Lock System Press brake pedal to start vehicle This warning message is displayed if the POWER button changes to the ACC position twice by pressing the button repeatedly without depressing the brake pedal. You can start the vehicle by depressing the brake pedal. Key not in vehicle This warning message is displayed if the battery of the smart key is discharged while changing the POWER button to the OFF position. 3-76 This warning message is displayed if the steering wheel does not lock normally while the POWER button changes to the OFF position. This warning message is displayed if the smart key is not in the vehicle when you press the POWER button. When attempting to start the vehicle, always have the smart key with you. Key not detected Press POWER button with key This warning message is displayed if the smart key is not detected when you press the POWER button. This warning message is displayed if you press the POWER button while the warning message "Key not detected" is displayed. At this time, the immobilizer indicator light blinks. Press POWER button again 3 Check BRAKE SWITCH fuse This warning message is displayed if the brake switch fuse is disconnected. You need to replace the fuse with a new one before starting the vehicle. If that is not possible, you can start the vehicle by pressing the POWER button for 10 seconds in the ACC position. Shift to P to start vehicle This warning message is displayed if you try to start the vehicle without shifting to the P (Park) position. OFE040110 This warning is displayed indicating which door, or the hood, or the liftgate is open. CAUTION Before driving the vehicle, you should confirm that the door/ hood/liftgate is fully closed. Also, check there is no door/ hood/liftgate open warning light or message displayed on the instrument cluster. 3-77 Convenience features of your vehicle This message is displayed if you were unable to start the vehicle when the POWER button was pressed. If this occurs, attempt to start the vehicle by pressing the POWER button again. If the warning message appears each time you press the POWER button, have your vehicle inspected by an authorized HYUNDAI dealer. Door / Hood / Liftgate open Convenience features of your vehicle Sunroof open Low Pressure Check headlight (if equipped) This warning message is displayed if the headlights are not operating properly. The headlight bulb may need to be replaced. i Information Make sure to replace the burned out bulb with a new one of the same wattage rating. OFE040111 OTM040022L This warning is displayed if you turn off the vehicle when the sunroof is open. This warning message is displayed if the tire pressure is low. The corresponding tire on the vehicle will be illuminated. For more details, refer to "Tire Pressure Monitoring System (TPMS)" in chapter 6. 3-78 For more details, refer to "Bulb Wattage" in chapter 8. Check headlight LED (if equipped) This warning message is displayed if there is a problem with the LED headlight. Have the vehicle inspected by an authorized HYUNDAI dealer. Check headlight FAN (if equipped) Check Virtual Engine Sound System Check High Beam Assist (HBA) system (if equipped) This warning message is displayed if there is a problem with the High Beam Assist (HBA) system. Have the vehicle inspected by an authorized HYUNDAI dealer. Lights Mode For more details, refer to "High Beam Assist (HBA) system" in chapter 3. This indicator displays which exterior light is selected using the lighting control. Wiper This indicator displays which wiper speed is selected using the wiper control. OFE041153N This message is displayed when there is a problem with the Virtual Engine Sound System (VESS). In this case, have your vehicle inspected by an authorized HYUNDAI dealer. Check Forward Collision Avoidance Assist system (if equipped) This warning message is displayed if there is a problem with the Forward Collision-Avoidance Assist (FCA) system. Have the vehicle inspected by an authorized HYUNDAI dealer. For more details, refer to "Forward Collision-Avoidance Assist (FCA) system" in chapter 5. 3-79 3 Convenience features of your vehicle This warning message is displayed if there is a problem with headlight fan. Have the vehicle inspected by an authorized HYUNDAI dealer. Convenience features of your vehicle Check Blind-Spot Collision Warning (BCW) system (if equipped) This warning message is displayed if there is a problem with the BlindSpot Collision Warning system. Have the vehicle inspected by an authorized HYUNDAI dealer. For more details, refer to "BlindSpot Collision Warning/Blind-Spot Collision-Avoidance Assist (BCA) or Rear Cross-Traffic Collision Warning (RCCW)/Rear CrossTraffic Collision-Avoidance Assist (RCCA)" (BCW) System in chapter 5. Check Smart Cruise Control System (if equipped) Check Lane Keeping Assist (LKA) system (if equipped) This warning message is displayed if there is a problem with the Smart Cruise Control system. Have the vehicle inspected by an authorized HYUNDAI dealer. This warning message is displayed if there is a problem with the Check Lane Keeping Assist (LKA) system. Have the vehicle inspected by an authorized HYUNDAI dealer. For more details, refer to "Smart Cruise Control with Stop & Go" in chapter 5. For more details, refer to "Check Lane Keeping Assist (LKA) system" in chapter 5. Check Driver Attention Warning (DAW) system (if equipped) This warning message is displayed if there is a problem with the Driver Attention Warning (DAW). Have the vehicle inspected by an authorized HYUNDAI dealer. For more details, refer to "Driver Attention Warning (DAW)" in chapter 5. 3-80 LCD DISPLAY LCD Display Control The LCD display modes can be changed by using the control buttons. (1) OFE048431L 3-81 3 Convenience features of your vehicle : MODE button for changing modes (2) , : MOVE switch for changing items (3) OK : SELECT/RESET button for setting or resetting the selected item Convenience features of your vehicle LCD Display Modes Menu Trip Computer TBT Consumption Info Route Guidance Accumulated Info Destination Info Assist Master warning The Master Warning mode Driver Attention Warning displays warning messages related to the vehicle when one or more systems is not Tire Pressure operating normally. Drive Info Up/Down Digital Speedometer The information provided may differ depending on which functions are applicable to your vehicle. 3-82 Trip computer mode Turn By Turn (TBT) mode Information mode 3 OIK047147N OFE041121N The trip computer mode displays information related to vehicle driving parameters including fuel economy, tripmeter information and vehicle speed. This mode displays the state of the navigation. Tire Pressure This mode displays information related to Tire Pressure. For more details, refer to "Trip Computer" in this chapter. For more details, refer to "Tire Pressure Monitoring System (TPMS)" in chapter 6. 3-83 Convenience features of your vehicle OFE041528N Convenience features of your vehicle Warning mode OIG059288L Driver Attention Warning This mode displays information related to Driver Attention Warning (DAW). For more details, refer to "Driver Attention Warning (DAW)" in chapter 5. 3-84 If one of followings occurs, warning messages will be displayed on the LCD display for several seconds. - Exterior lamp malfunction (if equipped) - Blind-Spot Collision Warning (BCW) system malfunction (if equipped) - Tire Pressure Monitoring System (TPMS) - High Beam Assist (HBA) malfunction (if equipped) - Forward Collision-Avoidance Assist (FCA) malfunction (if equipped) TRIP COMPUTER The trip computer is a microcomputer-controlled driver information system that displays information related to driving. i Information Fuel Economy • Average Fuel Economy • Instant Fuel Economy 3 Accumulated Info • Tripmeter • Fuel Economy • Timer OFE048431L To change the trip mode, toggle the " , " switch on the steering wheel. Drive Info • Tripmeter • Fuel Economy • Timer Digital Speedometer Energy Flow 3-85 Convenience features of your vehicle Some driving information stored in the trip computer (for example Average Vehicle Speed) resets if the battery is disconnected. Trip modes Convenience features of your vehicle Average fuel economy/ Instant fuel economy Manual reset To clear the average fuel economy manually, press the OK button on the steering wheel for more than 1 second when the average fuel economy is displayed. Automatic reset OFE041529N Average Fuel Economy (1) • The average fuel economy is calculated by the total driving distance and fuel consumption since the last average fuel economy reset. • The average fuel economy can be reset both manually and automatically. To automatically reset the average fuel economy, select between "After Ignition" or "After Refueling" in the Vehicle Settings mode in the Infotainment system screen. - After ignition: When the vehicle has been OFF for 4 hours or longer the average fuel economy will reset automatically. - After refueling: The average fuel economy will reset automatically after refueling. i Information The vehicle must be driven for a minimum of 0.19 miles (300 meters) since the last ignition key cycle before the average fuel economy will be recalculated. 3-86 Instant Fuel Economy (2) • The instantaneous fuel economy is displayed according to the bar graph in the LCD display while driving. Accumulated Info display The accumulated driving information will continue to be counted while the vehicle is still running (for example, when the vehicle is in traffic or stopped at a stop light). Drive Info display i Information 3 OJK041043N OJK041039N This display shows the accumulated trip distance (1), the average fuel economy (2), and the total driving time (3). The information is accumulated starting from the last reset. To reset the details, press and hold the OK button when viewing the Accumulated driving info. The trip distance, the average fuel economy, and total driving time will reset simultaneously. This display shows the trip distance (1), the average fuel economy (2), and the total driving time (3). The information is combined for each ignition cycle. However, when the vehicle has been OFF for 4 hours or longer the Drive Info screen will reset. To reset the details, press and hold the OK button when viewing the Drive Info. The trip distance, the average fuel economy, and total driving time will reset simultaneously. 3-87 Convenience features of your vehicle The vehicle must be driven for a minimum of 0.19 miles (300 meters) since the last ignition key cycle before the average fuel economy will be recalculated. Convenience features of your vehicle The driving information will continue to be counted while the vehicle is in the ready ( ) mode. (for example, when the vehicle is in traffic or stopped at a stop light). Digital speedometer Energy Flow i Information The vehicle must be driven for a minimum of 0.19 miles (300 meters) since the last ignition key cycle before the average fuel economy will be recalculated. OIK047151N OFE041131N This digital speedometer display shows the speed of the vehicle. The fuel cell vehicle system informs the drivers its energy flow in various operating modes. While driving, the current energy flow is specified in 3 modes. For more details, refer to "Energy Flow" in the fuel cell Vehicle Guide provided in front of the owner's manual. 3-88 H2O OUT Water release Water complete 3 OFE050192L OFE050191L This message displays when releasing accumulated water. This message displays when water release completed. 3-89 Convenience features of your vehicle OFEQ019014 Press the H2O OUT button to discharge accumulated water from the exhaust. The vehicle must be ON for the blower to operate. It prevents floor contamination / freezing due to discharge of accumulated water at the lower part of the vehicle or the muffler during the operation. (for example, Garage, etc.) Please pre-drain remain water prior to sea shipping to cryogenic areas or long-term storage (When starting vehicle in winter after starting off in fall) to prevent freezing. H2O OUT cannot operate when engine is off. Convenience features of your vehicle Water release condition CSD (Cold Shut-Down) OFE050190L This message displays when the H2O OUT button will not activate the blower. 3-90 CSD (Cold Shut-Down) will automatically discharge accumulated water after turning off the vehicle to prevent accumulated water from getting frozen in the fuel cell systems during the winter. When CSD activates, the amount of discharged water varies depending on driving time, driving mode, and last time the accumulated water was manually discharge with the H2O OUT button. NOTICE • If the H2O OUT button is operated while driving or stopping before entering the garage or underground parking lot, the amount of discharging water after turning off the key in CSD mode will be insignificant. • It is not necessary to press the H2O OUT button, but having it available allows you to control when water is purged from the system. LIGHTING Exterior Lights Lighting control To operate the lights, turn the knob at the end of the control lever to one of the following positions: Daytime running light (DRL) The Daytime Running Lights (DRL) can make it easier for others to see the front of your vehicle during the day, especially after dawn and before sunset. OOS047404N 1. OFF 2. AUTO headlight 3. Parking lamp 4. Headlight 3 OFE048061 AUTO headlight (if equipped) The parking lamp and headlight will be turned ON or OFF automatically depending on the amount of daylight as measured by the ambient light sensor (1) on the crash pad. Even with the AUTO headlight feature in operation, it is recommended to manually turn ON the headlights when driving at night or in a fog, driving in the rain, or when you enter dark areas, such as tunnels and parking facilities. 3-91 Convenience features of your vehicle The DRL system will turn the dedicated lamp OFF when : • The headlights are ON. • The parking lamps are ON. • The vehicle is turned off. • The parking brake is engaged. Convenience features of your vehicle NOTICE • Do not cover or spill anything on the sensor (1) located in front of the instrument panel. • Do not clean the sensor using a window cleaner, the cleanser may leave a light film which could interfere with sensor operation. • If your vehicle has window tint or other types of metallic coating on the front windshield, the AUTO headlight system may not work properly. OOS047405N OOS047406N Parking lamp ( ) The parking lamp, license plate lamp and instrument panel lamp are turned ON. Headlight ( ) The headlight, parking lamp, license plate lamp and instrument panel lamp are turned ON. i Information The POWER button must be in the ON position to turn on the headlight. 3-92 High beam operation High Beam Assist (HBA) 3 OOS047407N To turn on the high beam headlight, push the lever away from you. The lever will return to its original position. The high beam indicator will light when the headlight high beams are switched on. To turn off the high beam headlight, pull the lever towards you. The low beams will turn on. WARNING Do not use high beam when there are other vehicles approaching you. Using high beam could obstruct the other driver's vision. OOS047409N The High Beam Assist (HBA) is a system that automatically adjusts the headlight range (switches between high beam and low beam) according to the brightness of other vehicles and road conditions. Operating condition 1. Place the headlight switch in the AUTO position. 2. Turn on the high beam by pushing the lever away from you. The High Beam Assist (HBA) ( ) indicator will illuminate. 3-93 Convenience features of your vehicle OOS047408N To flash the high beam headlight, pull the lever towards you, then release the lever. The high beams will remain ON as long as you hold the lever towards you. Convenience features of your vehicle 3. The High Beam Assist (HBA) will turn on when vehicle speed is above 25 mph (40 km/h). • If the headlight switch is pushed away when the High Beam Assist (HBA) is operating, the High Beam Assist (HBA) will turn off and the high beam will be on continuously. • If the headlight switch is pulled towards you when the high beam is off, the high beam will turn on without the High Beam Assist (HBA) canceled. When you let go of the light switch, the lever will move to the middle and the high beam will turn off. • If the headlight switch is pulled towards you when the high beam is on by the High Beam Assist (HBA), the low beam will be on and the High Beam Assist (HBA) will turn off. • If the headlight switch is placed to the headlight ON position, the High Beam Assist (HBA) will turn off and the low beam will be on continuously. 3-94 When the High Beam Assist (HBA) is operating, the high beam switches to low beam if any of the following conditions occur : - When the headlight of an on-coming vehicle is detected. - When the tail lamp of a vehicle in front is detected. - When the headlight or tail lamp of a motorcycle or a bicycle is detected. - When the surrounding ambient light is bright enough that high beams are not required. - When streetlights or other lights are detected. - When the headlight switch is not in the AUTO position. - When the High Beam Assist (HBA) is off. - When vehicle speed is below 22 mph (35 km/h). OTM050218N Warning light and message When the High Beam Assist (HBA) is not working properly, the Check High Beam Assist warning message will come on for a few second. After the message disappears, the master warning light ( ) will illuminate. Take your vehicle to an authorized HYUNDAI dealer and have the system checked. WARNING • When the front window is cov- a narrow curved road or rough road. When the vehicle is driven on an uphill road or downhill road. When only part of the vehicle in front is visible on a crossroad or curved road. When there is a traffic light, reflecting sign, flashing sign or mirror. When the road conditions are bad such as being wet or covered with snow. When a vehicle suddenly appears from a curve. When the vehicle is tilted from a flat tire or being towed. When the Lane Keeping Assist (LKA) system warning light illuminates. When the light from the oncoming or front vehicle is not detected because of exhaust fume, smoke, fog, snow, etc. ered with foreign matters such as ice, dust, fog, or is damaged. 3) When the forward visibility is poor. Such examples may include: • When the headlights of an oncoming vehicle or a vehicle in front is not detected due to poor outside visibility (smog, smoke, dust, fog, heavy rain, snow, etc.). • When the windshield visibility is poor. • • • • • • • • 3-95 3 Convenience features of your vehicle The system may not operate normally if any of the following conditions should occur: 1) When the illumination from an on-coming vehicle or a vehicle in front is dim. Such examples may include: • When the headlights of an oncoming vehicle or the tail lamps of a vehicle in front is covered with dust, snow, or water. • When the headlights on an oncoming vehicle are OFF, but the fog lamps are ON. 2) When the High Beam Assist camera is adversely affected by an external condition. Such examples may include: • When the vehicle's headlights have been damaged or not repaired properly. • When the vehicle headlights are not aimed properly. • When the vehicle is driven on Convenience features of your vehicle WARNING • Do not attempt to disassemble the front view camera without the assistance of an authorized HYUNDAI dealer technician. If camera is removed for any reason, the system may need to be re-calibrated. Have the system inspected by an authorized HYUNDAI dealer. • If the windshield of your vehicle is replaced, most likely the front view camera will need to be re-calibrated. If this occurs, have your vehicle inspected and have the system re-calibrated by an authorized HYUNDAI dealer. • Be careful that water doesn't get into the High Beam Assist (HBA) unit and do not remove or damage related parts of the High Beam Assist (HBA) system. 3-96 • Do not place objects on the crash pad that reflect light such as mirrors, white paper, etc. The system may malfunction if sunlight is reflected. • At times, the High Beam Assist (HBA) may not work properly. The system is for your convenience only. It is the responsibility of the driver for safe driving practices and always check the road conditions for your safety. • When the system does not operate normally, change the headlight position manually between the high beam and low beam. Turn signals and lane change signals OOS047410N To signal a turn, push down on the lever for a left turn or up for a right turn in position (A). If the direction change is completed, the operation is automatically canceled. However, if the operation is not canceled automatically, set the lever to the center. If an indicator stays on and does not flash or if it flashes abnormally, one of the turn signal bulbs may be burned out and will require replacement. For more details, refer to the separately supplied Navigation manual. Battery saver function The purpose of this feature is to prevent the battery from being discharged. The system automatically turns off the parking lamp when the driver turns the vehicle off and opens the driver-side door. With this feature, the parking lamps will turn off automatically if the driver parks on the side of road at night. However, the position lamps stay ON even when the driver-side door is opened if the headlight switch is turned to the position lamp or AUTO (if equipped) position after the engine is turned off. If necessary, to keep the lamps on turn the position lamps OFF and ON again using the headlight switch on the steering column after the engine is turned off. Headlight time-out function (if equipped) If the POWER button is placed in the ACC position or the OFF position with the headlights ON, the headlights (and/or parking lamps) remain on for about 5 minutes. However, if the driver's door is opened and closed, the headlights are turned off after 15 seconds. Also, with the vehicle off if the driver's door is opened and closed, the headlights (and/or parking lamps) are turned off after 15 seconds. The headlights (and/or parking lamps) can be turned off by pressing the lock button on the smart key twice or turning the light switch to the OFF or AUTO position. You can activate or deactivate the Headlight Delay function from the Vehicle Settings mode (Light) on the Infotainment system screen. For more details, refer to the separately supplied Navigation manual. 3-97 3 Convenience features of your vehicle One-touch turn signal function To activate the One Touch Turn Signal function, push the turn signal lever up or down to position (B) and then release it. The lane change signals will blink 3, 5 or 7 times. You can activate or deactivate the One Touch Turn Signal function or choose the number of blinks (3, 5, or 7) from the Vehicle Settings mode in the Infotainment system screen. Convenience features of your vehicle NOTICE If the driver gets out of the vehicle through other doors (except driver’s door), the battery saver function does not operate and the headlight delay function does not turn off automatically. Therefore, It causes the battery to be discharged. In this case, make sure to turn off the lamp before getting out of the vehicle. Interior Lights WARNING Do not use the interior lights when driving in the dark. The interior lights may obscure your view and cause an accident. NOTICE Do not use the interior lights for extended periods when the vehicle is turned off or the battery will discharge. Interior lamp AUTO cut The interior lamps will automatically go off approximately 20 minutes after the vehicle is turned off and the doors are closed. If a door is opened, the lamp will go off 40 minutes after the vehicle is turned off. If the doors are locked by the remote key or smart key and the vehicle enters the armed stage of the theft alarm system, the lamps will go off five seconds later. 3-98 Front lamps OFE048063 Front Map Lamp (1) : Press either lenses (Type A) or switches ( , Type B) to turn the map lamp on or off. This light produces a spot beam for convenient use as a map lamp at night or as a personal lamp for the driver and the front passenger. Front Room Lamp (2) ( ): Press the button to turn the front and rear room lamps on or off. Luggage compartment lamp ■ Type A 3 OAEE046421 ■ Type B OFE048065L The luggage compartment lamp comes on when the liftgate is opened. If the liftgate is continuously opened, the luggage compartment lamp will turn off after 20 minutes. OFE048064 Rear Room Lamp ( ): Press this switch to turn the rear room lamp on and off. 3-99 Convenience features of your vehicle Front Door Lamp (3) ( ): The front or rear room lamps come on when the front or rear doors are opened. When doors are unlocked by the smart key, the front and rear lamps come on for approximately 30 seconds as long as any door is not opened. The front and rear room lamps go out gradually after approximately 30 seconds if the door is closed. However, if the POWER button is in the ON position or all doors are locked, the front and rear lamps will turn off. If a door is opened with the POWER button in the ACC position or the OFF position, the front and rear lamps stay on for about 20 minutes. Rear lamp Convenience features of your vehicle Vanity mirror lamp Glove box lamp Puddle lamp (if equipped) OOS047055 OFE048433L OFE048066 Push the switch to turn the light on or off. • : The lamp will turn on if this button is pressed. • : The lamp will turn off if this button is pressed. The glove box lamp comes on when the glove box is opened. If the glove box is not closed, the lamp will turn off after 20 minutes. Welcome light When all doors (and liftgate) are closed and locked, the puddle lamp will come on for 15 seconds if the door is unlocked by the remote key or smart key or outside door handle button. NOTICE Always have the switch in the off position when the vanity mirror lamp is not in use. If the sunvisor is closed without the lamp off, it may discharge the battery or damage the sunvisor. 3-100 NOTICE To prevent unnecessary charging system drain, close the glove box securely after using the glove box. For more details, refer to "Welcome System" in this chapter. Welcome System (if equipped) Welcome light OFE048062N Puddle lamp With all the doors (and liftgate) closed and locked, the puddle lamp will come on for about 15 seconds if any of the below is performed. 1. If 'Convenience → Welcome mirror/light → On door unlock' is selected in the vehicle Settings mode on the Infotainment system screen, • the lamps will turn on when the door lock button is pressed on the smart key. • the lamp will turn on when the button of the outside door handle is pressed with the smart key in possession. 2. If both 'Convenience → Welcome mirror/light → On door unlock' and 'Convenience → Welcome mirror/ light → On driver approach' is selected in the vehicle Settings mode on the Infotainment system screen, the lamp will turn on when the vehicle is approached with the smart key in possession. You can activate or deactivate Welcome Light function from the vehicle Settings mode on the Infotainment system screen. For more details, refer to the separately supplied "Navigation manual". 3-101 3 Convenience features of your vehicle Escort light When the vehicle is turned OFF and the driver's door is opened, the puddle lamp will come on for 30 seconds. If the driver's door is closed within the 30 seconds, the puddle lamp will turn off after 15 seconds. If the driver's door is closed and locked, the puddle lamp will turn off immediately. The Puddle Lamp Escort Light will turn on only the first time the driver's door is opened after the vehicle is turned off. Convenience features of your vehicle Headlight and parking lamp When the headlight (lamp switch in the headlight or AUTO position) is on and all doors (and liftgate) are locked and closed, the parking lamp and headlight will come on for 15 seconds when the door unlock button is pressed on the remote key or smart key. At this time, if you press the door lock or unlock button, the parking lamp and headlight will turn off immediately. 3-102 Interior lamp When the interior lamp switch is in the DOOR position and all doors (and liftgate) are closed and locked, the room lamp will come on for 30 seconds if any of the below is performed. • When the door unlock button is pressed on the remote key or smart key. • When the button of the outside door handle is pressed with the smart key in possession. At this time, if you press the door lock or unlock button on the smart key the room lamp will turn off immediately. WIPERS AND WASHERS A : Wiper speed control · MIST – Single wipe · OFF – Off · INT – Intermittent wipe · LO – Low wiper speed · HI – High wiper speed ■ Front windshield wiper/washer OPD047454L ■ Rear window wiper/washer C : Wash with brief wipes (pull lever towards you) D : Rear wiper/washer control · HI – High wiper speed · LO – Low wiper speed · OFF – Off E : Wash with brief wipes (rear) (push lever away from you) Operates as follows when the POWER button is in the ON position. MIST : For a single wiping cycle, push the lever upward and release. The wipers will operate continuously if the lever is held in this position. OFF : Wiper is not in operation. INT : Wiper operates intermittently at the same wiping intervals. To vary the speed setting, move the speed control lever. The top most setting will run the wipers most frequently (for more rain). The bottom setting will run the wipers the least frequently (for less rain). LO : The wiper runs at a lower speed. HI : The wiper runs at a higher speed. OTLA045318 3-103 3 Convenience features of your vehicle B : Intermittent control wipe time adjustment Front Windshield Wipers Convenience features of your vehicle i Information If there is heavy accumulation of snow or ice on the windshield, defrost the windshield for about 10 minutes, or until the snow and/or ice is removed before using the windshield wipers to ensure proper operation. If you do not remove the snow and/or ice before using the wiper and washer, it may damage the wiper and washer system. 3-104 AUTO - Automatic Wiper Control (if equipped) A rain sensor located near the windshield detects moisture accumulation and controls the wiping cycle automatically. This mode is designed to operate the wiper at an appropriate speed depending on the amount of rainfall. The sensitivity can be varied by turning the adjustment control (B) located on the wiper stalk. If the wiper switch is set in AUTO mode when the ignition switch is in the ON position, the wiper will operate once to perform a self-check of the system. Set the wiper control to the OFF position when the windshield wipers are not required. WARNING To avoid personal injury from the windshield wipers, when the engine is running and the windshield wiper switch is placed in the AUTO mode: • Do not touch the upper end of the windshield glass facing the rain sensor. • Do not wipe the upper end of the windshield glass with a damp or wet cloth. • Do not put pressure on the windshield glass. NOTICE WARNING When the outside temperature is below freezing, ALWAYS warm the windshield using the defroster to help prevent the washer fluid from freezing on the windshield and obscuring your vision which could result in an accident and serious injury or death. OTLE045164 In the OFF position, pull the lever gently toward you to spray washer fluid on the windshield and to run the wipers 1-3 cycles. The spray and wiper operation will continue until you release the lever. If the washer does not work, you may need to add washer fluid to the washer fluid reservoir. 3-105 3 Convenience features of your vehicle • When washing the vehicle, set the wiper switch in the OFF position to stop the auto wiper operation. The wiper may operate and be damaged if the switch is set in the AUTO mode while washing the vehicle. • Do not remove the sensor cover. Damage to system parts could occur and may not be covered by your vehicle warranty. • Because of using a photo sensor, temporary malfunction could occur according to sudden ambient light change while driving. Front Windshield Washers Convenience features of your vehicle NOTICE • To prevent possible damage to the washer pump, do not operate the washer when the fluid reservoir is empty. • To prevent possible damage to the wipers or windshield, do not operate the wipers when the windshield is dry. • To prevent damage to the wiper arms and other components, do not attempt to move the wipers manually. • To prevent possible damage to the wipers and washer system, use anti-freezing washer fluids in the winter season or cold weather. 3-106 Rear Window Wiper and Washer OTLE045166 OTLE045165 The rear window wiper and washer switch is located at the end of the wiper and washer switch lever. Turn the switch to the desired position to operate the rear wiper and washer. HI – High wiper speed LO – Low wiper speed OFF – Off Push the lever away from you to spray rear washer fluid and to run the rear wipers 1~3 cycles. The spray and wiper operation will continue until you release the lever. Auto rear wiper The rear wiper will operate while the vehicle is in reverse with the front wiper ON by selecting the function on the Infotainment system screen. Go to 'Vehicle Settings → Convenience → Auto Rear Wiper (in R)'. DRIVER ASSIST SYSTEM Parking Distance Warning (Reverse/Forward) System (if equipped) WARNING • ALWAYS look around your vehicle to make sure there are no objects or obstacles before moving the vehicle in any direction to prevent a collision. • Always pay close attention when the vehicle is driven close to objects, particularly pedestrians, and especially children. • Be aware that some objects may not be visible on the screen or be detected by the sensors, due to the objects distance, size or material, all of which can limit the effectiveness of the sensor. OFE048047N [A] : Front Sensor, [B] : Rear Sensor 3-107 3 Convenience features of your vehicle OFE048046N The Parking Distance Warning (Reverse/Forward) system assists the driver during movement of the vehicle by chiming if any object is sensed within the distance of 39 inches (100 cm) in front and 47 inches (120 cm) behind the vehicle. This system is a supplemental system that senses objects within the range and location of the sensors, it cannot detect objects in other areas where sensors are not installed. Convenience features of your vehicle Operation of the Parking Distance Warning (Reverse/Forward) System OFE048048 Operating condition • This system will activate when the Parking Distance Warning (Reverse/ Forward) system button is pressed with the POWER button in the ON position. • Sensing distance when backing up is approximately 47 in (120 cm) when you are driving less than 6 mph (10 km/h). 3-108 • Sensing distance when moving forward is approximately 39 in (100 cm) when you are driving less than 6 mph (10 km/h). • The Parking Distance Warning (Reverse/Forward) system button turns on automatically and activates the Parking Distance Warning (Reverse/Forward) system when the gear is in the R (Reverse) position. • However, if vehicle speed exceeds 6 mph (10 km/h), the system will not warn you even though objects are detected. And if vehicle speed exceeds 12 mph (20 km/h, without RSPA) or 18 mph (30 km/h, with RSPA), the system will turn off automatically. * RSPA : Remote Smart Parking Assist • To turn on the system, press the Parking Distance Warning (Reverse/ Forward) system button. • When more than two objects are sensed at the same time, the closest one will be recognized first. Types of warning sound and indicator inches (cm) Distance from object Front 24 ~ 47 (61 ~ 120) Rear 12 ~ 24 (31 ~ 60) 12 (30) - - Buzzer beeps intermittently Buzzer beeps intermittently Buzzer beeps frequently Buzzer sounds continuously Front Rear Warning sound Buzzer beeps frequently Front Rear When driving rearward - Buzzer sounds continuously i Information • The indicator may differ from the illustration depending on objects or sensors status. If the indicator blinks, have your vehicle checked by an authorized HYUNDAI dealer. • If the audible warning does not sound or if the buzzer sounds intermittently when shifting into R (Reverse) position, this may indicate a malfunction with the Parking Distance Warning (Reverse/Forward) system. If this occurs, have your vehicle checked by an authorized HYUNDAI dealer. • Moisture is frozen to the sensor. • Sensor is covered with foreign matter, such as snow or water, or the sensor cover is blocked. The Parking Distance Warning (Reverse/Forward) system may experience a malfunction when the following occurs: • Driving on uneven road surfaces such as unpaved roads, gravel, bumps, or gradient. • Objects generating excessive noise such as vehicle horns, loud motorcycle engines, or truck air brakes can interfere with the sensor. • Heavy rain or water spray is present. • Wireless transmitters or mobile phones are present near the sensor. • The sensor is covered with snow. 3-109 3 Convenience features of your vehicle 24 ~ 39 (61 ~ 100) Warning indicator When driving forward Non-operational conditions of Parking Distance Warning (Reverse/Forward) system The Parking Distance Warning (Reverse/Forward) system may not operate normally when any of the following occur: Convenience features of your vehicle • Any non-factory equipment or accessories have been installed, or if the vehicle bumper height or sensor installation has been modified. Detecting range may decrease when: • Outside air temperature is extremely hot or cold. • Undetectable objects smaller than 40 inches (1 m) and narrower than 6 inches (14 cm) in diameter. The following objects may not be recognized by the sensor: • Sharp or slim objects such as ropes, chains or small poles. • Objects, which tend to absorb sensor frequency such as clothes, spongy material or snow. 3-110 Parking Distance Warning (Reverse/Forward) system precautions • The Parking Distance Warning (Reverse/Forward) system may not operate consistently in some circumstances depending on the speed of the vehicle and the shapes of the objects detected. • The Parking Distance Warning (Reverse/Forward) system may malfunction if the vehicle bumper height or sensor installation has been modified or damaged. Any non-factory installed equipment or accessories may also interfere with the sensor performance. • The sensor may not recognize objects less than 15 in. (40 cm) from the sensor, or it may sense an incorrect distance. Use caution. • When the sensor is blocked with snow, dirt, debris, or ice, the system may be inoperative until the snow or ice melts, or the debris is removed. Use a soft cloth to wipe debris away from the sensor. • Do not push, scratch or strike the sensor with any hard objects that could damage the surface of the sensor. Sensor damage could occur. • Do not spray the sensors or its surrounding area directly with a high pressure washer. Doing so may cause the sensors to fail to operate normally. WARNING Your new vehicle warranty does not cover any accidents or damage to the vehicle or injuries to its occupants related to a Parking Distance Warning (Reverse/Forward) system. Always drive safely and cautiously. Rear View Monitor (if equipped) The Rear View Monitor will activate when the vehicle is in the ready ( ) mode and the gear is in the R (Reverse) position. This is a supplemental system that helps provide a view of the area behind the vehicle through the Infotainment system screen while the vehicle is in the R (Reverse) position. OFE042049 The Rear view monitor is not a safety device. It only serves to assist the driver in identifying objects directly behind the middle of the vehicle. The camera does NOT cover the complete area behind the vehicle. • Never rely solely on the rear camera display when backingup. • ALWAYS look around your vehicle to make sure there are no objects or obstacles before moving the vehicle in any direction to prevent a collision. • Always pay close attention when the vehicle is driven close to objects, particularly pedestrians, and especially children. NOTICE Always keep the camera lens clean. The camera may not work normally if the lens is covered with dirt, water or snow. OFE048050 3-111 3 Convenience features of your vehicle WARNING WARNING Convenience features of your vehicle Surround View Monitoring (if equipped) The system is activated when: • The POWER button is in the ON position • The gear is in D (Drive), N (Neutral) or R (Reverse) • Vehicle speed is under 10 mph (15 km/h) The system is deactivated when: • You press the button (1) again • Vehicle speed is over 10 mph (15 km/h) OFE048051 The Surround View Monitoring (SVM) system can assist in parking by allowing the driver to see around the vehicle. Push the button (1, indicator ON) to operate the system. To cancel the system, push the button again (1, indicator OFF). 3-112 i Information • When vehicle speed is over 10 mph (15 km/h), the system will turn off. The system will not automatically turn on again, even though vehicle speed gets below 10 mph (15 km/h). Push the button (1, indicator ON) again, to turn on the system. • When the vehicle is backing up, the system will turn ON regardless of vehicle speed or button status. However, if vehicle speed is over 10 mph (15 km/h) when driving forward, the SVM system will turn off. • A warning appears on the system when: - The liftgate is opened - The driver's door is opened - The passenger's door is opened - The outer side view mirror is folded • If the system is not operating normally, the system should be checked by an authorized HYUNDAI dealer. For more details, refer to the separately supplied manual with your vehicle. CAUTION Driving Rear view Monitor (DRM) (if equipped) ODH047435 OFE048051 The system is deactivated when: • You press the SVM button (1, indicator OFF) again • You press any other view mode buttons (3) on the screen again. • You press the Infotainment system button (4) NOTICE Always keep the camera lens clean. The camera may not work normally if the lens is covered with foreign material. OFE048052L 3-113 3 Convenience features of your vehicle The system is activated when: • The POWER button is in the ON position and the gear is in the N (Neutral) or D (Drive) position. • The vehicle's speed is over 10 mph (15 km/h) and you press the SVM button (1, indicator ON) • The vehicle's speed is under 10 mph (15 km/h) and you press the (2) on the screen (1) Front camera (2) Left/Right camera (3) Rear camera Surround View Monitor system only serves to assist the driver in parking. ALWAYS look around your vehicle to make sure there are no objects or obstacles before moving the vehicle. You may check the rear view through the screen while driving. Convenience features of your vehicle i Information • If vehicle speed is over 10 mph (15 km/h) - the DRM image stays ON when the rear view was on the screen - screen (top, front wide, front right and front left) of other modes of SVM system turns OFF and switches to the original Infotainment system screen when other modes were on the screen • If the SVM system is ON and the vehicle speed is under 10 mph (15 km/h) - the rear image stays ON when the rear view was on the screen - a pop-up for selecting the SVM mode (top, front wide, front right and front left) appears when pressing any other view mode buttons (3) than (2) on the screen. 3-114 • When the vehicle is backing up, the rear image will appear on the screen automatically regardless of vehicle speed or SVM button (1) status. - If the rear image was ON, the screen switches to the parking assist screen. - If the screen (top, front wide, front right and front left) of other modes of SVM system was ON, the screen for setting the initial rear view mode appears. - When the shift gear is moved from R (Reverse) to D (Drive), the screen of the previous mode is displayed. • A warning appears on the system when: - The liftgate is opened - The driver's door is opened - The passenger's door is opened - The outer side view mirror is folded • If the system is not operating normally, the system should be checked by an authorized HYUNDAI dealer. For more details, refer to the separately supplied manual with your vehicle. REMOTE SMART PARKING ASSIST (RSPA) (IF EQUIPPED) REMOTE SMART PARKING ASSIST (RSPA) system helps drivers park their vehicle by using sensors to detect parking spaces, control the steering wheel, shift the gear and adjust vehicle speed automatically with instructions through sound and Infotainment system screen. Assistance provided Parking Distance Warning button Relevant function ■ Reverse parking OTM048058 Smart Parking O Remote Smart Parking O Smart Parking O Remote Smart Parking O Smart Exit O Remote Smart Exit X Remote Moving Forward/ Backward O ■ Parallel parking OFE048420 ■ Parallel exit OFE048421 Remote Smart Parking Assist button Deactivate the system and park/exit your vehicle manually, when the situation requires parking manually. The Parking Distance Warning system's front and rear warning sound and Surround View Monitor (SVM) system activate while RSPA is activated. The system will be canceled if the Parking Distance Warning system is cancelled by pressing the button to the OFF position. For operation of the Parking Distance Warning system and the SVM system, refer to the relevant description in this manual. ■ Forward/Backward OFE048054 ❈ O : Available, X : Unavailable 3-115 3 Convenience features of your vehicle Applicable RSPA modes : • Smart Parking/Remote Smart Parking: The system provides assistance for reverse parking (perpendicular parking) and parallel parking. • Smart Exit : The system provides assistance for forward parallel exit. • Remote Moving Forward/Backward: The system provides assistance for forward/backward movement in the parking space with driver outside the vehicle. The system does not work if there is no car parked in front of the parking space you are planning to park or if it is a diagonal parking space. After parking your vehicle using the system, the vehicle may not be parked at the exact spot you have wished. To prevent frequency interference, the heater and air conditioner may be turned off when the system is activated. Convenience features of your vehicle WARNING • The RSPA system should only be considered as a supplementary function. The driver must check the front and rear view for objects. The operational function of the system can be affected by many factors and conditions of the surroundings, so the responsibility rests always with the driver. • The system may not operate normally if the vehicle needs wheel alignment adjustment. Have the vehicle checked by an authorized HYUNDAI dealer. • If you use a different tire or wheel size rather than the size recommended by the HYUNDAI dealer, the system may not work properly. Always use the same size tire and wheel. 3-116 WARNING • Do not use the system when in drunken state. • The system may not operate properly depending on the surrounding environment and other conditions. • The system may not recognize the object too close to the vehicle. • When operating the system, be careful of the objects located above or below the sensor position. Such object may damage the vehicle or other objects. • Do not let children or other person to use the smart key. Operating Condition Use the system when all the below conditions are met. • When the parking space is a straight line • When there is a parked vehicle next to the space where you want to park • When there is enough space to move the vehicle • When you choose "Confirm" on Infotainment system booting. ■ Right side - Reverse parking OFE048097 ■ Left side - Parallel parking OFE048096 ■ Left side - Parallel exit ■ Right side - Parallel exit OFE048098 ■ Remote forward/backward OFE048054 Non-operating Condition In the following conditions, the RSPA system may not operate properly or be cancelled. Drive the vehicle manually in the below conditions. • Curved parking space • Inclined roads • A vehicle loaded with longer or wider cargo compared to the vehicle • Diagonal parking space • Heavy snow or rain • Near a circular pillar or narrow pillar, or a pillar surrounded by objects such as fire extinguisher, etc. • The sensor is positioned incorrectly by an impact to the bumper • Bumpy roads • A vehicle equipped with a snow chain or spare tire • Tire pressure lower or higher than the standard tire pressure • A trailer connected to the vehicle • Slippery or uneven road 3-117 3 Convenience features of your vehicle ■ Right side - Parallel parking ■ Left side - Reverse parking Convenience features of your vehicle • If a nearby vehicle has a tow hitch receiver that protrudes beyond the bumper, the RSPA may not recognize it. Use caution and monitor the clearance to the receiver. • Big vehicles such as buses or trucks parked • Sensor covered with foreign matter, such as snow or water • An obstacle such as a trash can, bicycle, shopping cart, etc., is near • Heavy wind • Wheel changed to an unauthorized size • A problem with the wheel alignment • Vehicle leaned severely to one side • Front or rear distance sensors are malfunction or not working properly. (Refer to the Parking Distance Warning system in chapter 3.) • Low level of the smart key that requires battery replacement 3-118 Limitations of the System • When the vehicle has been parked/stopped for a long time in a cold environment, the Remote Moving Forward/Backward may be delayed depending on the vehicle condition when the vehicle is turned on remotely. • The RSPA system may suddenly apply brake to avoid collision against stationary or moving object. • The system may be cancelled unexpectedly when a person or animal passes by near the vehicle. • The performance of the system may be degraded and frequently stop when driving in strong electric field area. • Right after the parking place search complete and beep sound is generated, the search complete may be cancelled according to the surrounding environment • Even while the system is in activation, the vehicle may collide with the object existing within the blindspot area of the sensor. • When there is any obstacle within the blind-spot area, drive out of the parking space manually. • The system may not recognize the object that appears suddenly. • The system does not work if there is no car parked in front of the parking space you are planning to park. • Your vehicle is loaded with cargo longer or wider than your vehicle or a trailer or hitch mounted carrier is connected to your vehicle. WARNING 2. Parking in snow 3. Parking in narrow space Do not use the RSPA system in the following conditions for unexpected results may occur and cause a serious accident. 1. Parking on inclines 3 Snow may interfere with sensor operation or the system may cancel if the road is slippery while parking. OTM048062 The system may not search for parking spaces if the space is too narrow. Even if the system is operating, always be careful. OFE048400 Park and exit manually when you park on inclines. 3-119 Convenience features of your vehicle OFE048401 Convenience features of your vehicle 4. Parking diagonal 5. Parking in uneven road OTM048063 The system is not a supplemental for diagonal parking. Even if the vehicle is able to enter the space, do not operate the System. 3-120 OFE048402 The system may cancel when the vehicle slips or the vehicle couldn't move due to road condition. 6. Parking behind a truck OFE048403 An accident may occur when parking behind a vehicle higher than yours. For example, bus, truck, etc. Do not solely rely on the Parking Assist system. 7. Obstacle in parking space 8. Using a Smart Exit in wall proximity conditions 9. Parking in an empty parking place 3 When detecting for a parking space next to pillar, the parking performance may be degraded. OTM048062 OFE048424 When using a Smart Exit in narrow and near a wall, the system may not work properly. The system does not work if there is no car parked in front of the parking space you are planning to park. Park the vehicle manually. 3-121 Convenience features of your vehicle OFE048059N Convenience features of your vehicle How the System Works (Smart Parking) Smart Parking is available with the driver on board. Make sure the conditions available before activating the Smart parking function. 1. Select Smart Parking: Press the RSPA button with the shift lever placed in D (Drive) or N (Neutral) position. ❈ However, the Smart Exit is selected if you press the RSPA button when the gear is in N (Neutral) position after the initial startup. 2. Search for parking space: Slowly move forward below 12 mph (20 km/h) 3. Search complete: Automatic search by sensor. However, check the actual parking environment before parking the vehicle. 4. Select parking type: Reverse (left/right), parallel (left/right) 5. Operating instructions: Smart Parking/Remote Smart Parking 3-122 CAUTION 1. Selecting Parking mode • Always check for obstacles around your vehicle before driving. • The function may be cancelled if you attach something (cover, etc.) to the steering wheel. 6. Smart Parking assist: Steering wheel, gear shift and vehicle speed control (reverse parking). 7. Parking complete: Smart Parking complete after reaching the parking position ❈ After the parking is complete, arrange the vehicle position manually, if necessary. ❈ You can use Smart Parking after navigation or home screen display on Infotainment system (You cannot use Smart Parking if you don't choose "Confirm" on Infotainment system booting) OFE048414 Remote Smart Parking Assist button Parking Distance Warning button • Press the Remote Smart Parking Assist button and the button indicator will illuminate. • The Parking Distance Warning button will illuminate and the Infotainment system screen will display the instruction screen. A warning sound will be heard if an obstacle is detected. 2. Searching for parking space ❈ The parking performance may be degraded if a regular distance from the parked vehicle is not maintained. • If the vehicle speed is over 19 mph (30 km/h), the system will be cancelled. • The search for a parking space will be completed only when there is enough space for the vehicle to move to park. OFE048134L • Slowly drive forward maintaining the distance of approximately 20 in ~60 in (0.5 ~1.5 m) with the parked vehicles. • If the vehicle speed is over 12 mph (20 km/h), a message will appear to notify you to reduce the speed. • To deactivate the parking function, press the RSPA button, the 'Cancel' button on the screen or the Parking Distance Warning button. 3-123 3 Convenience features of your vehicle • To deactivate the system: 1. Press the RSPA button again (until the "Selecting parking mode" stage). 2. Shift the gear to R (Reverse) position before the operation of the Smart Parking assist. 3. Press the 'Cancel' button on the Infotainment system screen while the Smart Parking is in activation. 4. Press the Parking Distance Warning button while the Smart Parking is in activation. Convenience features of your vehicle CAUTION CAUTION • When searching for a parking space, the system may not be able to find a parking space if there is no vehicle parked, a parking space is available after driving by or a parking space is available before driving by. • The system may not operate normally in the following conditions: (1) When the sensors are frozen (2) When the sensors are dirty (3) When it snows or rains heavily (4) When a pillar or object is near (5) Parked vehicle is abnormally parked In above cases, the system may not search the parking space although the parking space exists. And the system may search the parking space although the parking space is not proper to park. 3-124 20 ~ 60 in. OFE048474N CAUTION Slowly drive forward maintaining the distance of approximately 40 in. (100 cm) with the parked vehicles. If the distance is below 20 in. (50 cm) or over 60 in. (150 cm), the system may not be able to search for a parking space. After searching for a parking space is completed, continue using the system after checking the surrounding area. Especially, check the distance of the outside rearview mirror and objects while using the system to prevent careless accidents. 3. Search complete 4. Selecting parking type • If the search is complete, the above message will appear with a dingdong sound. • The search complete sound is generated every time a parking space is searched. Icons indicating the selectable parking type and direction are activated on the screen. • To deactivate parking function, press the RSPA button, the 'Cancel' button on the screen or the Parking Distance Warning button. • Keep driving forward to go back to the previous stage for searching the parking space. ❈ If the Smart Parking is deactivated when the driver presses the RSPA button by mistake before selecting the parking type, press the RSPA button while the vehicle is stopped to return to the stage for selecting the parking type. OFE048404L • With the vehicle stopped, select the icon for the desired parking type. To select the parking type, touch the Infotainment system screen or operate the DIS central controller to select and press the icon. 3-125 3 Convenience features of your vehicle OFE048136L OFE048135L • To deactivate the parking function, press the RSPA button or the 'Cancel' on the screen or the Parking Distance Warning button. • Keep driving forward to go back to the previous stage for searching the parking space. Convenience features of your vehicle 5. Operating instructions ❈ To see the instruction for the Remote Smart Parking, refer to the relevant part of the manual. ❈ Depress the brake pedal when selecting the operation mode. The function will be deactivated when the vehicle moves. OFE048138L OFE048137L • After selecting the parking type, the driver can select the operation mode between the Smart Parking and Remote Smart Parking. Follow the instruction on the screen and press and hold the RSPA button to select the Smart Parking. To select the Remote Smart Parking put the shift gear in P (Park) position and follow the instruction. • To deactivate the parking assist function, press the 'Cancel' button on the screen or the Parking Distance Warning button. 3-126 ❈ If the Remote Smart Parking is unavailable, the message is shown on the screen when selecting the parking type. WARNING Always be careful while parking for other vehicles or pedestrians. 6. Smart parking assist • The parking function will not operate if the door is open or the driver's seatbelt is unfastened. • If the driver releases the RSPA button while the Smart Parking is in activation, the assist will stop temporarily. OFE048166N • With the vehicle stopped, press and hold the RSPA button and then the steering wheel, gear shift and vehicle speed are controlled automatically. 3 OFE048141L Complete parking your vehicle according to the instructions on the Infotainment system screen. If required, manually control the steering wheel and complete parking your vehicle. When the parking is complete: • The gear P (Park) and Electronic Parking Brake (EPB) are engaged automatically. • Release the RSPA button. ❈ The parking may complete bumping on the stopper. ❈ When parking is complete, check the surrounding conditions. 3-127 Convenience features of your vehicle OFE048165N ❈ The Infotainment system screen will display the rear camera view when the vehicle is moving forward (if equipped with the Rear View Camera). ❈ Depress the brake pedal to control the vehicle speed. The accelerator pedal will not activate. The system will be cancelled when the vehicle speed exceeds 3 mph (5 km/h). 7. Smart parking complete Convenience features of your vehicle CAUTION If the Parking Distance Warning system warning sound (distance from object is within 12 in. (30 cm): continuous beep) occurs, check the surrounding. To cancel the Smart Parking while in operation (1) Press the RSPA button before selecting the operation mode. (2) Shift the gear to to R (Reverse) position before the operation of the "Smart Parking assist" stage. (3) Press the Parking Distance Warning button or the 'Cancel'button on the Infotainment system screen. (4) Driver controls the vehicle during the system assist When the driver shifts the gear after depressing the brake pedal to stop the vehicle, the gear shifts and the Smart Parking is deactivated. In this case, the Electronic Parking Brake (EPB) is not engaged. 3-128 The Smart Parking assist will stop temporarily when: (1) An obstacle at the direction the vehicle is heading is detected. (2) The door or liftgate is open. (3) The driver’s seatbelt is unfastened. (4) The Rear Cross-Traffic CollisionAvoidance Assist (RCCA) system is activated while reversing. (5) The driver releases the RSPA button. (6) The drivers stops the vehicle by depressing the brake pedal. ❈ The vehicle stops when the Smart Parking assist will stop temporarily and the Smart Parking assist will resume when the above condition is cleared. (12) The steering, shifting gear and drive assist are impossible (13) The suspended status lasts for over 1 minute (14) The driver continuously presses and releases the RSPA button over 10 times (15) The vehicle is unable to enter the parking space while the Smart Parking assist is in activation (16) The Traction Control System (TCS) is activated while the vehicle speed is controlled ❈ When the Smart Parking assist is cancelled, gear P (Park) and Electronic Parking Brake (EPB) are engaged automatically. How the System Works (Remote Smart Parking) Remote smart Parking is available with the driver outside the vehicle. Make sure the conditions available before activation the Remote smart parking function. 1. Select Remote Smart Parking: Press the RSPA button with the shift lever placed in D (Drive) or N (Neutral) position. However, the Smart Exit is selected if you press the RSPA button when the vehicle is in N (Neutral) position after the initial startup. 2. Search for parking space: Slowly move forward below 12 mph (20 km/h). 3. Search complete: Automatic search by sensor. However, check the actual parking environment before parking the vehicle. 4. Select parking type: Reverse (left/right), parallel (left/right) 5. Operating instructions: Smart Parking/Remote Smart Parking 6. Remote Smart Parking assist: Steering wheel, gear shift and vehicle speed control (reverse parking) 7. Remote Smart Parking complete 3-129 3 Convenience features of your vehicle The Smart Parking assist is cancelled while in operation when: (1) The driver holds the steering wheel while the steering wheel is controlled (2) The gear is shifted or the Electronic Parking Brake (EPB) is activated (3) The hood opens (4) The vehicle speed exceeds 3 mph (5 km/h) (5) The vehicle accelerates suddenly (6) The vehicle slips back while the vehicle speed is controlled (7) The wheel is stuck and the vehicle is unable to move (8) The obstacles are at the front and back of the vehicle at the same time (9) About 3 minutes and 50 seconds have passed after the Smart Parking assist is activated (10) The door opens while the driver’s seatbelt is unfastened (11) The gradient of the road exceeds the range supported by the Smart Parking assist Convenience features of your vehicle Remote Smart Parking Assist button 6. Remote smart parking assist Parking Distance Warning button Remote start button Moving forward button Moving backward button OFE048414 OFE048142L OFE048422 ❈ You cannot use Smart Parking if you didn't press "Confirm" on the Infotainment screen when the vehicle was started. 3-130 Put the shift gear in P (Park) position. Exit the vehicle possessing the smart key and check whether all the doors are closed. The Remote Smart Parking assist will operate only if the driver presses the smart key button within about 13 ft. (4 m) from the vehicle. Press and hold the moving forward or backward button on the smart key and then the steering wheel, gear shift and vehicle speed are controlled automatically. ❈ The driver should release the seat belt before getting off. ❈ While Remote smart parking assist is operating, the air conditioning system turns off temporarily. 7. Remote smart parking complete When the parking is complete, the message is displayed on the Infotainment system screen and the vehicle is automatically turned off. Drivers always should check whether the door, window and sunroof are closed and the door is locked. • When parking is complete: - The parking complete sound (frequent beep) is generated. - The gear P (Park) and Electronic Parking Brake (EPB) are engaged automatically. ❈ Release the moving forward/backward button on the smart key. ❈ The parking may complete bumping on the stopper. ❈ When parking is complete, check the surrounding conditions. CAUTION • Always check for obstacles • • • • • around your vehicle before driving. The function may be cancelled if you attach something (cover, etc.) to the steering wheel. Make sure all the passengers exit the vehicle when the Remote Smart Parking is assisted. Make sure all the smart keys are outside the vehicle. The smart key detection range from the vehicle may vary depending on the surrounding environment (indoor/outdoor, strong electric field area). The smart key detection range may change as the vehicle moves. Maintain an appropriate distance from the vehicle. 3-131 3 Convenience features of your vehicle • If the driver releases the button the vehicle will stop and the assist will stop temporarily. Press and hold the button again to resume the operation. ❈ You will hear frequent beep sounds if the driver gets off the vehicle after setting the Remote Parking mode. ❈ Press the moving forward or backward button again after checking the distance (within about 10 ~ 16 ft. (3~5 m)) from the vehicles if the vehicle didn’t move after pressing and holding the smart key button for about 5 seconds. Convenience features of your vehicle To cancel the Remote Smart Parking while in operation (1) Press the RSPA button at the "Searching for parking space" stage or the "Selecting parking type" stage. (2) Shift the gear to R (Reverse) position before the operation of the Remote Smart Parking assist. (3) Press the Parking Distance Warning button or the 'Cancel' button on the Infotainment system screen. (4) Driver controls the vehicle during the system assist. • The Remote Smart Parking is immediately cancelled and the vehicle turns off when the remote start button on the smart key is pressed. • The function is cancelled but the vehicle stays on when the driver enters the vehicle with the smart key and all the doors are closed or the driver depresses the brake pedal. 3-132 The Remote Smart Parking assist will stop temporarily when: (1) An obstacle at the direction the vehicle is heading is detected. (2) The door or liftgate is open. (3) The moving forward/backward button on the smart key is released. (4) Multiple buttons on the smart key are pressed at the same time. (5) The distance between the smart key and vehicle is over 13 ft (4m). (6) A button on the other smart key is pressed. (7) Rear Cross-Traffic CollisionAvoidance Assist system is activated while reversing. ❈ The vehicle stops when the Remote Smart Parking assist will stop temporarily and the Remote Smart Parking assist will resume when the above condition is cleared. The Remote Smart Parking assist is cancelled while in operation when: (1) The driver holds the steering wheel while the steering wheel is controlled (2) The gear is shifted or the Electronic Parking Brake (EPB) is activated (3) The hood opens (4) The vehicle speed exceeds 3 mph (5 km/h) (5) The vehicle accelerates suddenly (6) The vehicle slips back while controlling the vehicle speed (7) The wheel is stuck and the vehicle is unable to move (8) Obstacles are at the front and back of the vehicle at the same time (9) Approximately 3 minutes and 50 seconds have past after Remote Forward/Backward function has started to operate (10) The gradient of the road exceeds the range supported by the Remote Smart Parking assist • When the Remote Smart Parking assist is cancelled, gear P (Park) and Electronic Parking Brake (EPB) are engaged automatically. After engaged, the vehicle is automatically turned off. • Frequent beep sounds will generate to alert the deactivation of the Remote Smart Parking Assist. How the System Works (Smart Exit) Smart exit is available with the driver on board. Make sure the conditions available before activation the Smart parking function. 1. Select Smart Exit: Press the RSPA button with the shift lever placed in P (Park) or N (Neutral) position without driving the vehicle after the initial startup. *N (Neutral): Press RSPA button after starting the vehicle and without driving the vehicle. The Smart Exit is selected. Then the Parking mode is automatically selected after driving. *P (Park): After driving the vehicle press RSPA button and Remote Moving Forward/Backward is automatically selected. 2. Search for smart exit space: Automatic searching by sensor at stop However, check the actual environment before using Smart exit function. 3-133 3 Convenience features of your vehicle (11) The steering wheel, gearshift, braking, and drive controls are not working normally (12) The suspended status lasts for over 1 minute (13) The driver continuously presses and releases the smart key’s moving forward/backward button over 10 times (14) The vehicle is unable to enter the parking space (15) The Traction Control System (TCS) is activated while controlling the vehicle speed (16) The smart key has failure (17) The accelerator/brake pedal is depressed while all the doors are closed (18) The brake pedal is depressed while the driver’s door is open and the smart key is outside the vehicle (19) The theft alarm system is activated Convenience features of your vehicle 3. Select smart exit direction: Parallel (left/right) 4. Smart Exit assist: Steering wheel, gear shift and vehicle speed control (parallel exit) 5. Smart Exit complete WARNING Always be careful while exiting for other vehicles or pedestrians. After the Smart Exit is complete, make sure to check the surrounding road conditions. However, the Exit mode is activated when below conditions are met: • The vehicle speed is kept under 3 mph (5 km/h) after the vehicle is turned on. • The parallel parking by the Remote Smart Parking assist is complete. 1. Searching for smart exit space OFE048143L • With vehicle stopped, the Parking Distance Warning system sensors detect the distance from/to the objects in front/back of the vehicle to search for an exit space. • Also, the sensors at the vehicle side-front checks for the obstacle in the direction of exit. • To deactivate the exit function, press the RSPA button, the ‘Cancel’ button on the screen or the Parking Distance Warning button. 3-134 CAUTION • When checking surroundings, if the front or rear vehicle (or object) is too near, the system may not work properly. • The system may not operate normally in the following conditions: (1) When the sensors are frozen (2) When the sensors are dirty (3) When it snows or rains heavily (4) When a pillar or object is near (5) Parked vehicle is abnormally parked In above cases, the system may not search the exit space although the exit space exists. And the system may search the exit space although the exit space is not proper to Smart exit. • When exiting the parking space if an obstacle is detected that may cause an accident, the system may cancel. However, objects in the blind spot may not be recognized. Be sure to check it before using function. • If the space is too small to exit, the system may cancel. 3-135 3 Convenience features of your vehicle ❈ The system searches for the exit space again when the system enters the Smart Exit mode by pressing the RSPA button after the deactivation. ❈ The system still searches for the exit space when the gear is shifted to the other positions than R (Reverse). However, the function will be deactivated when the vehicle moves. Convenience features of your vehicle CAUTION 2. Selecting smart exit direction • If searching surroundings is completed, continue using the system after checking the surround in garea. • The Exit mode may be activated unintentionally, when the shift gear is in P (Park) or N (Neutral) and the Parking Assist system button is pressed. OFE048144L • With the vehicle stopped, select the icon of the direction you wish to exit. To select the exit direction, touch the Infotainment system screen or operate the DIS central controller to select and press the icon. • To deactivate the exit function, press the RSPA button, the 'Cancel' button on the screen or the Parking Distance Warning button. 3-136 ❈ The system searches for the exit space again when the system enters the Smart Exit mode by pressing the RSPA button after the deactivation. ❈ The system still searches for the exit space when the gear is shifted to the other positions than R (Reverse). However, the function will be deactivated when the vehicle moves. 3. Smart exit instructions CAUTION 4. Smart exit assist • Always check the surrounding • Follow the instructions on the screen and press and hold the RSPA button to select the Smart Exit. • To deactivate the Smart Exit, press the ‘Cancel’ button on the screen or the Parking Distance Warning button. 3 OFE048165N OFE048166N ❈ The system still searches for the exit space when the gear is shifted to the other positions than R (Reverse). However, the function will be deactivated when the vehicle moves. • With the vehicle stopped, press and hold the RSPA button and then the steering wheel, gear shift and vehicle speed are controlled automatically. 3-137 Convenience features of your vehicle OFE048145L before driving your vehicle if the Parking Distance Warning sound (distance from object is within 12 in. (30 cm): continuous beep) is heard for the object is close to your vehicle. • The function may be cancelled if you attach something (cover, etc.) to the steering wheel. • The function can be cancelled for safety reasons if the vehicle is parked at a small space near a wall. Convenience features of your vehicle • The exit function will not operate if the door is open or the driver’s seatbelt is unfastened. • If the driver releases the RSPA button while the Smart Exit assist is in activation, the assist will stop temporarily. ❈ The Infotainment system screen will display the rear camera view when the vehicle is moving forward (if equipped with the Rear View Camera). ❈ Depress the brake pedal to control the vehicle speed. The accelerator pedal will not activate. 3-138 5. Smart exit complete • When exit is complete: - The vehicle stays in stopped condition for 4 seconds and waits for the driver' to operate manually (depress brake/accelerator pedal.) - If the driver does not operate manually after 4 seconds, the system stays in the stopped condition by applying the safety measure (engage gear P (Park) and Electronic Parking Brake (EPB)). OFE048146L When the exit is complete, the message is displayed on the Infotainment system screen. Turn the steering wheel to the direction of exit as much as possible and exit manually after checking the road condition. ❈ Release the RSPA button after the exit is complete. ❈ If the Smart Exit has been completed while depressing the accelerator pedal, take your foot off the pedal and depress again for manual operation. ❈ If the Smart Exit has been completed while depressing the brake pedal, the gear D (Drive) is maintained. The Smart Exit assist will stop temporarily when: (1) An obstacle at the direction the vehicle is heading is detected. (2) The door or liftgate is open. (3) The driver's seatbelt is unfastened. (4) The Rear Cross-Traffic CollisionAvoidance Assist (RCCA) system is activated while reversing. (5) The driver releases the RSPA button. (6) The driver stops the vehicle by depressing the brake pedal. The function is deactivated when the driver stops the vehicle by depressing the brake pedal and shifts the gear. In this case, the Electronic Parking Brake (EPB) is not engaged. ❈ The vehicle stops when the Smart Exit assist will stop temporarily and the Smart Exit assist will resume when the above condition is cleared. The Smart Exit assist is cancelled while in operation when: (1) The driver holds the steering wheel while the steering wheel is controlled (2) The gear is shifted or the Electronic Parking Brake (EPB) is activated (3) The hood opens (4) The vehicle speed exceeds 3 mph (5 km/h) (5) The vehicle accelerates suddenly (6) The vehicle slips back while controlling the vehicle speed (7) The wheel is stuck and the vehicle is unable to move (8) Obstacles are at the front and back of the vehicle at the same time (9) About 3 minutes and 50 seconds have passed after the Smart Exit assist (10) The door opens while the driver's seatbelt is unfastened (11) The gradient of the road exceeds the range supported by Smart Exit assist 3-139 3 Convenience features of your vehicle To cancel the Smart Exit while in operation (1) Press the RSPA button at the "Searching for smart exit space" stage or the "Selecting for smart exit direction" stage. (2) Shift the gear to R (Reverse) position before the operation of the Smart Exit assist. (3) Press the Parking Distance Warning button or the 'Cancel' button on the Infotainment system screen. (4) Driver controls the vehicle during the system assist Convenience features of your vehicle (12) The steering, shifting gear and drive assist are impossible (13) The suspended status lasts for over 1 minute (14) The driver continuously presses and releases the RSPA button over 10 times (15) The Traction Control System (TCS) is activated while controlling the vehicle speed (16) The vehicle's heading degree (A) exceeds a certain amount of degree compare to the degree at the point when the Smart Exit assist started OFE048405 ❈ When the Smart Exit assist is cancelled, gear P (Park) and Electronic Parking Brake (EPB) are engaged automatically. How the System Works (Remote Moving Forward/ Backward) 3-140 Remote moving forward/backward is available with the driver outside the vehicle. Make sure the conditions available before activation the Remote moving forward/backward function. 1. Remote Moving Forward/ Backward ready: (1) With the vehicle off: Remotely turn on the vehicle. (2) With the vehicle on: Put the gear shift in P (Park) position and press the RSPA button. Then exit the vehicle possessing the smart key. ❈ To use this function, - the vehicle must have been driven over 3 mph (5 km/h) and - the vehicle is not turned off before activating the function. 2. Remote Moving Forward/Backward assist: Press and hold the moving forward/backward button of the smart key to provide the Remote Moving Forward/Backward assist through steering wheel, gear shift and vehicle speed control. 3. Remote Moving Forward/Backward complete: When the vehicle reaches the desired position, release the smart key button. Then complete the Remote Moving Forward/ Backward by entering the vehicle possessing the smart key or by pressing the remote start button of the smart key. Remote Smart Parking Assist button Parking Distance Warning button Remote start button Moving forward button OFE048414 You can activate the Remote Moving Forward/Backward in 2 ways. (1) With the vehicle turned off, press the door lock button of the smart key and then within 4 seconds press the remote start button for over 2 seconds. ❈ For the details of remote start up, refer to 'Remote start' in chapter 3. (2) Park the vehicle in front of the space where you desire to use the Remote Moving Forward/ Backward. Press the RSPA button and select the Remote Moving Forward/Backward. Exit the vehicle possessing the smart key and check whether all the doors are closed. OFE048422 3-141 3 Convenience features of your vehicle Moving backward button 1. Remote moving ready Convenience features of your vehicle 2. Remote moving forward/backward assist OFE048142L ❈ When the Remote Moving Forward/Backward is ready by the above No. (2) method. You can use Smart Parking after navigation or home screen display on Infotainment system (You cannot use Smart Parking if you don't choose "Confirm" on Infotainment system booting) ❈ You will hear frequent beep sounds if the driver gets off the vehicle after the Remote Moving Forward/ Backward is ready. ❈ The driver should release the seat belt before getting off. 3-142 OFE048409 • With the vehicle stopped, press and hold one of the moving forward/backward button and then the steering wheel, gear shift and vehicle speed are controlled automatically. • If the driver releases the moving forward/backward button while the Remote Moving Forward/Backward is in activation, the control will stop temporarily. Press the button again to resume the control. • For your safety, the assist is activated only when the smart key is within about 10~16 ft. (3~5 m) from the vehicle. • The vehicle can travel up to 23 ft. (7 m) per move. Press the moving forward/backward button to make additional movement. ❈ Press the moving forward/backward button again after checking the distance from the vehicles if the vehicle didn't move after pressing and holding the smart key button for about 5 seconds. ❈ Under cold weather, take enough time before pressing the moving forward/backward button of the smart key after turning on the vehicle remotely. It may take more time until the vehicle moves. ❈ While Remote moving forward/ backward assist is operating, the air conditioning system turns off temporarily 3. Remote moving forward/backward complete WARNING Always be careful of unexpected approach of the other vehicles or pedestrians. • Always check for obstacles OFE048410L The Remote Moving Forward/ Backward is complete after the driver enters the vehicle possessing the smart key, when the vehicle reaches the desired position. In this case, the vehicle stays on. ❈ When Remote Moving Forward/ Backward assist is complete, the gear P (Park) and Electronic Parking Brake (EPB) are engaged automatically. ❈ The parking complete sound (frequent beep) is generated. around your vehicle before driving. • The function may be cancelled if you attach something (cover, etc.) to the steering wheel. • Make sure all the passengers exit the vehicle when the Remote Moving Forward/ Backward is in activation. • Make sure all the smart keys are outside the vehicle when the Remote Moving Forward/ Backward assist is in activation. 3-143 3 Convenience features of your vehicle CAUTION To cancel the Remote Moving Forward/Backward while in operation (1) Press the remote start button on the smart key. (2) Shift the gear to to R (Reverse) position while the Remote Moving Forward/Backward is instructed. (3) Press the Parking Distance Warning button or the 'Cancel' button on the Infotainment system screen while the Remote Moving Forward/ Backward is instructed. (4) Driver controls the vehicle during the system assist • The Remote Moving Forward/ Backward is immediately cancelled and the vehicle turns off when the remote start button on the smart key is pressed • The function is cancelled but the vehicle stays on when the driver enters the vehicle with the smart key and all the doors are closed or the driver depresses the brake pedal. Convenience features of your vehicle The Remote Moving Forward/ Backward assist will stop temporarily when: (1) An obstacle at the direction the vehicle is heading is detected. (2) The door or liftgate is open. (3) The moving forward/backward button on the smart key is released. (4) Multiple buttons on the smart key are pressed at the same time. (5) The distance between the smart key and vehicle is over 13 ft. (4 m). (6) A button on the other smart key is pressed. (7) Rear Cross-Traffic CollisionAvoidance Assist (RCCA) system is activated while reversing. (8) The vehicle moves 23 ft. (7m) (maximum travel distance per move) with the Remote Moving Forward/Backward while the smart key is pressed. ❈ The vehicle stops when the Remote Smart Parking assist will stop temporarily and the Remote Smart Parking assist will resume when the above condition is cleared. 3-144 The Remote Moving Forward/ Backward assist is cancelled while in operation when: (1) The driver holds the steering wheel while the steering wheel is controlled (2) The gear is shifted or the Electronic Parking Brake (EPB) is activated (3) The hood opens (4) The vehicle speed exceeds 3 mph (5 km/h) (5) The vehicle accelerates suddenly (6) The vehicle slips back while controlling the vehicle speed (7) The wheel is stuck and the vehicle is unable to move (8) Obstacles are at the front and back of the vehicle at the same time (9) About 3 minutes and 50 seconds have passed after the Remote Moving Forward/Backward assist (10) The gradient of the road exceeds the range supported by Remote Moving Forward/ Backward assist (11) The steering, shifting gear and drive assist are impossible (12) The suspended status lasts for over 1 minute (13) The driver continuously presses and releases the smart key's moving forward/backward button over 10 times (14) The Traction Control System (TCS) is activated while controlling the vehicle speed (15) The smart key has failure (16) The accelerator/brake pedal is depressed while all the doors are closed (17) The brake pedal is depressed while the driver's door is open and the smart key is outside the vehicle (18) The vehicle travels more than 46 ft. (14 m) after the Remote Moving Forward/Backward assist is activated (19) The smart key's remote start button is pressed Additional Instructions (Messages) ❈ When Remote Moving Forward/ Backward is complete, the gear P (Park) and Electronic Parking Brake (EPB) are engaged automatically and the vehicle turns off. ❈ The frequent beep sounds are generated to show the deactivation status. When the Remote Smart Parking Assist system is in operation, the system may be cancelled regardless of the instruction order. The messages will appear according to the circumstances. Follow the instructions provided while driving your vehicle with the Remote Smart Parking Assist system in activation. Check parking assist 3 OFE048411L If there is a problem with the system, the above message will appear when the system is turned on. Also, the indicator on the RSPA button will blink and the warning sound will beep three times. (The Parking Distance Warning system can be operable depending on the failure type.) If you notice any problem, have the vehicle checked by an authorized HYUNDAI dealer. 3-145 Convenience features of your vehicle (20) The theft alarm system is activated Convenience features of your vehicle Parking assist conditions not met Turn Signal Showing Vehicle Status while System in Activation The turn signal indicates the vehicle status as follows when the Smart Parking, Remote Smart Parking or Smart Exit is in activation: Vehicle status OFE048412N When the Remote Smart Parking Assist system is not getting ready for activation, the above message will appear when the RSPA button is pressed. Press the RSPA button again after a while and check the normal operation of the system. 3-146 Turn signal Smart Parking/Remote Smart Parking assist in activation The turn signal of the parking direction blinks until the first reversing is complete or deactivated while parking Smart Exit assist in activation The turn signal of the exiting direction blinks until the exit is complete or deactivated Smart key/Hazard lamp Showing Vehicle Status while System in Activation The LED on the smart key indicates the vehicle status as follows when the Remote Smart Parking or Remote Moving Forward/Backward is in activation: Vehicle status Hazard lamp Smart key LED - Green LED blinks continuously Remote Smart Parking assist temporarily stopped/in stand by Flashing Red LED blinks continuously Remote Smart Parking deactivated Off after 3 flashes Red LED illuminates for about 4 seconds and then extinguishes Remote Smart Parking complete Off after one flashes Green LED illuminates for about 4 seconds and then extinguishes 3 OFE048423 3-147 Convenience features of your vehicle Remote Smart Parking assist in activation Convenience features of your vehicle Link with other Systems Activation of other systems may be restricted according to the circumstances while the RSPA system is in activation. The systems linked to the RSPA system are as follows: 1. Smart Cruise Control (SCC) system (1) SCC system can be operated at the same time with the RSPA system until the "Searching for parking space" stage. (2) The SCC system is deactivated when the RSPA system enters the "Remote Smart Parking assist" stage. (3) After the RSPA system is complete or deactivated, the SCC system maintains the deactivation status. 3-148 2. Auto Hold (1) The activated Auto Hold is switched to deactivation status when the RSPA system is activated. (2) The Auto Hold button will not respond while the RSPA system is in activation. (3) After the RSPA system is complete or deactivated, the Auto Hold will return to the state before the RSPA system was activated. 3. Electronic Stability Control (ESC) (1) Electronic Stability Control (ESC) system switches from OFF to activation status (ESC OFF button turns off) when the RSPA system is activated. (2) The ESC OFF button will not respond while the RSPA system is in activation. (3) The ABS/TCS/ESC system activates while the RSPA is in activation. (4) After the RSPA system is complete or deactivated, ESC maintains the ON status. AUTOMATIC CLIMATE CONTROL SYSTEM ■ Type A OFE048300/OFE048308 3-149 3 Convenience features of your vehicle ■ Type B 1. Driver’s temperature control knob 2. Passenger’s temperature control knob 3. SYNC button 4. Front windshield defroster button 5. Fan speed control button 6. OFF button 7. AUTO (automatic control) button 8. Air intake control button 9. Rear window defroster button 10. Driver only button 11. Mode selection button 12. Air conditioning button Convenience features of your vehicle Automatic Temperature Control Mode The Automatic Climate Control System is controlled by setting the desired temperature. 1. Press the AUTO button (7). The modes, fan speeds, air intake and air-conditioning will be controlled automatically by the temperature setting you select. 2. Press the temperature control button (1,2) to the desired temperature. If the temperature is set to the lowest setting (Lo), the air conditioning system will operate continuously. After the interior has cooled sufficiently, adjust the button to a proper temperature set point whenever possible. To turn the automatic operation off, select any button of the following: - Mode selection button - Front windshield defroster button (Press the button one more time to deselect the front windshield defroster function. The 'AUTO' sign will illuminate on the information display once again.) 3-150 - Fan speed control button The selected function will be controlled manually while other functions operate automatically. For your convenience and to improve the efficiency of the climate control, use the AUTO button and set the temperature to 72°F (22°C). OFE048068N NOTICE Never place anything near the ambient light/solar sensor to ensure better control of the heating and cooling system. Manual Temperature Control Mode The heating and cooling system can be controlled manually by pushing buttons other than the AUTO button. In this case, the system works sequentially according to the order of buttons selected. When pressing any button except the AUTO button while using automatic operation, the functions not selected will be controlled automatically. 1. Start the vehicle. 2. Set the mode to the desired position. To improve the effectiveness of heating and cooling, select the mode according to the following: - Heating: - Cooling: 3. Set the temperature control to the desired position. 4. Set the air intake control to Fresh mode or Recirculation mode position. 5. Set the fan speed control to the desired speed. Mode selection (11) 3 Convenience features of your vehicle 6. If air conditioning is desired, turn the air conditioning system on. 7. Press the AUTO button to convert to full automatic control of the system. When starting the vehicle in cold weather a more efficient way to heat the passenger compartment is to do the following. - Turn off or lower the blower, right after starting the engine. • The fuel cell temperature will be low and the heater air is still cold. - After a few minutes to allow the system to warm up, set the fan to the desired level. OFE048302 The mode selection button controls the direction of the air flow through the ventilation system. 3-151 Convenience features of your vehicle The air flow outlet direction is cycled as follows: Face-Level (B, D, F) Air flow is directed toward the upper body and face. Additionally, each outlet can be controlled to direct the air discharged from the outlet. Bi-Level (B, C, D, E, F) Air flow is directed towards the face and the floor. Floor & Defrost (A, C, D, E, F) Instrument panel vents ■ Front Most of the air flow is directed to the floor and the windshield with a small amount directed to the side window defrosters. Floor-Level (A, C, D, E, F) Most of the air flow is directed to the floor, with a small amount of the air being directed to the windshield and side window defrosters. OFE048303 ■ Rear Defrost-Level (4) (A, D) Most of the air flow is directed to the windshield with a small amount of air directed to the side window defrosters. OFE048304 The instrument panel vent air flow can be directed up/down or left/right using the vent adjustment lever. 3-152 Temperature control (1,2) 3 OFE048310N OFE048309N Press the up/down switch to increase/ decrease the temperature. Adjusting the driver and passenger side temperature equally • Press the "SYNC" button to operate the driver and passenger side temperature equally. The passenger side temperature will be set to the same temperature as the driver side temperature. • Push the driver side temperature control switch. The driver and passenger side temperature will be adjusted equally. 3-153 Convenience features of your vehicle The air flow can also be CLOSED using the vent adjustment lever. The instrument panel air vents are the "click-to-close" type. To CLOSE the instrument panel vents perform the following: - For the driver side vents, slide the vent adjustment lever to the LEFT until it clicks. - For the passenger side vents, slide the vent adjustment lever to the LEFT until it clicks. Convenience features of your vehicle Adjusting the driver and passenger side temperature individually Press the "SYNC" button again to operate the driver and passenger side temperature individually. The button indicator will turn off. Temperature conversion If the battery has been discharged or disconnected, the temperature mode display will reset to Fahrenheit. To change the temperature unit from °F to °C or °C to °F: - Press the AUTO button while pressing the OFF button on the climate control unit for 3 seconds. - Go to General settings mode → Unit → Temperature in the Infotainment system display. The temperature unit on both the cluster LCD display and climate control screen will change. 3-154 Air intake control (8) The air intake control button is used to select either Fresh mode (outside air) or Recirculation mode (cabin air). Recirculation mode When Recirculation mode is selected, air from the passenger compartment will be recirculated through the system and heated or cooled according to the function selected. Fresh mode When Fresh mode is selected, air enters the vehicle from outside and is heated or cooled according to the function selected. i Information Operating the system primarily in Fresh mode is recommended. Use Recirculation mode temporarily only when needed. Prolonged operation of the heater in Recirculation mode and without the A/C ON can cause fogging of the windshield. In addition, prolonged use of the A/C ON in Recirculation mode may result in excessively dry, dehumidified air in the cabin and may promote formation of musty vent odor due to stagnant air. WARNING • Continued use of the climate Air conditioning (12) The fan speed can be set as desired by pushing the fan speed control button. More air is delivered with higher fan speeds. Pressing the OFF button turns off the fan. Push the A/C button to manually turn the system on (indicator light will illuminate) and off. NOTICE OFF mode (6) Push the OFF button to turn the climate control system off. You can still operate the mode and air intake buttons. Operating the fan when the POWER button is in the ON position could cause the battery to discharge. Operate the blower when the vehicle is in the ready ( ) mode. NOTICE Operating the fan when POWER button is in the ON position could cause the battery to discharge. Operate the fan when the vehicle is in the ready ( ) mode. 3-155 3 Convenience features of your vehicle control system operation in Recirculation mode for a prolonged period of time may cause drowsiness to the occupants in the cabin. This may lead to loss of vehicle control which may lead to an accident. • Continued use of the climate control system operation in Recirculation mode with the A/C OFF may allow humidity to increase inside the cabin. This may cause condensation to accumulate on the windshield and obscure visibility. • Do not sleep in your vehicle or remain parked in your vehicle with the windows up and either the heater or the air conditioning ON for prolonged periods of time. Doing so may increase the levels of carbon dioxide in the cabin which may lead to serious injury or death. Fan speed control (5) Convenience features of your vehicle Driver only System Operation Cooling / Ventilation 1. Select the Face Level mode. 2. Set the air intake control to fresh mode. 3. Set the temperature control to the desired position. 4. Set the fan speed control to the desired speed. Heating OFE048311 If you press the DRIVER ONLY button( DRIVER ONLY ) and the indicator light illuminates, cold air mostly blows in the direction of the driver's seating position. However, some of the cold air may be vented out of other seating position ducts to keep indoor air pleasant. If you use the button with no passenger in the front passenger seat, energy consumption may be reduced. DRIVER ONLY button will be turned off under the following conditions: 1) Defrost on (the DRIVER ONLY button indicator is not turned off) 2) DRIVER ONLY button re-push 3-156 1. Select the Floor Level mode. 2. Set the air intake control to fresh mode. 3. Set the temperature control to the desired position. 4. Set the fan speed control to the desired speed. 5. If desired, turn the air conditioning ON with the temperature control knob set to heat in order to dehumidify the air before it enters into the cabin. If the windshield fogs up, select the Floor & Defrost mode or press the Front Defrost mode. Operation Tips • If dust or unpleasant fumes are entering the car through the ventilation system, temporarily set the air intake control to the recirculation mode. Return the control to the fresh mode when the unpleasant air outside has diminished. This will help keep the driver alert and comfortable. • To help prevent the inside of the windshield from fogging, set the air intake control to fresh mode and the fan speed to the desired position, turn on the air conditioning system, and adjust the temperature control to the desired temperature. Air conditioning When using the air conditioning system, monitor the temperature gauge closely while driving up hills or in heavy traffic when outside temperatures. Air conditioning system operation when climbing a steep grade or in high outside ambient temperatures can cause fuel cell stack overheating. Continue to use the fan, but turn the air conditioning system off if the temperature gauge indicates fuel cell stack overheating. Air conditioning system operation tips • If the vehicle has been parked in direct sunlight during hot weather, open the windows for a short time to let the hot air inside the vehicle escape. • After sufficient cooling has been achieved, switch back from recirculation mode to fresh mode. • To help reduce moisture inside of the windows on rainy or humid days, decrease the humidity inside the vehicle by operating the air conditioning system with the windows and sunroof closed. • Use the air conditioning system every month only for a few minutes to ensure maximum system performance. • If you operate air conditioner excessively, the difference between the temperature of the outside air and that of the windshield could cause the outer surface of the windshield to fog up, causing loss of visibility. In this case, set the mode selection knob or button to the position and fan speed control to the lower speed. 3-157 3 Convenience features of your vehicle Your HYUNDAI vehicle air conditioning system is filled with R-1234yf refrigerant. 1. Start the vehicle. 2. Press the air conditioning button. 3. Select the Face Level mode. 4. Set the air intake control to Recirculation mode temporarily to allow the cabin to cool quickly. When the desired temperature in the cabin is reached, change the air intake control back to Fresh mode. 5. Adjust the fan speed control and temperature control to maintain maximum comfort. When maximum cooling is desired, set the temperature control to the MAX A/C position, then set the fan speed control to the highest setting. NOTICE Convenience features of your vehicle System Maintenance Cabin air filter If the vehicle is being driven in severe conditions such as dusty or rough roads and/or if transporting pets or occupants smoke inside the vehicle, then more frequent cabin air filter inspections and changes are required. If the air flow rate suddenly decreases, the system should be checked at an authorized HYUNDAI dealer. OIK047401L [A] : Outside air, [B] : Recirculated air [C] : Climate control air filter, [D] : Blower [E] : Evaporator core, [F] : Heater core The cabin air filter is installed behind the glove box. It filters the dust or other pollutants that enter the vehicle through the heating and air conditioning system. Have the The cabin air filter replaced by an authorized HYUNDAI dealer according to the maintenance schedule. 3-158 Checking the amount of air conditioner refrigerant and compressor lubricant When the amount of refrigerant is low, the performance of the air conditioning is reduced. Overfilling also reduces the performance of the air conditioning system. Therefore, if abnormal operation is found, have the vehicle inspected by an authorized HYUNDAI dealer. NOTICE It is important that the correct type and amount of oil and refrigerant is used. Otherwise, damage to the compressor and abnormal system operation may occur. To prevent damage, the air conditioning system in your vehicle should only be serviced by trained and certified technicians. NOTICE • The refrigerant system should only be serviced by trained and certified technicians to insure proper and safe operation. • The refrigerant system should be serviced in a well-ventilated place. • The air conditioning evaporator (cooling coil) shall never be repaired or replaced with one removed from a used or salvaged vehicle and new replacement MAC evaporators shall be certified (and labeled) as meeting SAE Standard J2842. ■ Example WARNING Vehicles equipped with R-1234yf 3 OFE088006NA OHYK059002 Air Conditioning refrigerant label You can find out which air conditioning refrigerant is applied to your vehicle on the label located inside of the hood. Each symbols and specification on the air conditioning refrigerant label is represented as below: 1. Classification of refrigerant 2. Amount of refrigerant 3. Classification of compressor lubricant 4. Caution 5. Flammable refrigerant 6. To require registered technician to service air conditioning system 7. Service manual 3-159 Convenience features of your vehicle Since the refrigerant is mildly flammable and operated at high pressure, the air conditioning system should only be serviced by trained and certified technicians. It is important that the correct type and amount of oil and refrigerant are used. All refrigerants should be reclaimed with proper equipment. Venting refrigerants directly to the atmosphere is harmful to individuals and environment. Failure to heed these warnings can lead to serious injuries. Convenience features of your vehicle WINDSHIELD DEFROSTING AND DEFOGGING WARNING Windshield heating Do not use the or position during cooling operation in extremely humid weather. The difference between the temperature of the outside air and that of the windshield could cause the outer surface of the windshield to fog up, causing loss of visibility could cause an accident resulting in serious injury or death. In this case, set the mode selection knob or button to the position and fan speed control knob or button to a lower speed. 3-160 • For maximum defrost performance, set the temperature control to the highest temperature setting and the fan speed control to the highest setting. • If warm air to the floor is desired while defrosting or defogging, set the mode to the floor-defrost position. • Before driving, clear all snow and ice from the windshield, rear window, side view mirrors, and all side windows. • Clear all snow and ice from the hood and air inlet in the cowl grill to improve heater and defroster efficiency and to reduce the probability of fogging up the inside of the windshield. Automatic Temperature Control System OFE048305 To defog inside windshield 1. Select the desired fan speed. 2. Select the desired temperature. 3. Press the defroster button ( ). 4. Fresh mode will be selected automatically. Check to make sure the air intake control is in Fresh mode. If the air intake control LED is illuminated, press the button once to enable Fresh mode (LED OFF). If the position is selected, the fan speed is automatically increased. Defogging logic To reduce the probability of fogging up the inside of the windshield, the air intake or air conditioning are controlled automatically according to certain conditions such as or positions. To cancel or reset the defogging logic, do the following. If the battery has been discharged or negative (-) battery cable is disconnected, it resets to the defog logic status. 3-161 3 Convenience features of your vehicle OFE048306 To defrost outside windshield 1. Set the fan speed to the highest (extreme right) position. 2. Set the temperature to the extreme hot (HI) position. 3. Press the defroster button ( ). 4. The outside (fresh) air position will be selected automatically. If the position is selected, fan speed may increase slightly to improve airflow. Automatic climate control system 1. Turn the POWER button to the ON position. 2. Press the defroster button ( ). 3. While pressing the air conditioning button (A/C), press the air intake control button at least 5 times within 3 seconds. The Automatic Temperature Control information screen will blink 3 times to indicate that the defogging logic has been disabled. Repeat the steps again to re-enable the defogging logic. Convenience features of your vehicle Auto Defogging System (Additional Feature with Automatic Temperature Control System) (if equipped) Auto defogging helps reduce the possibility of fogging up the inside of the windshield by automatically sensing the moisture on inside the windshield. The auto defogging system operates when the heater or air conditioning is on. i Information The auto defogging system may not operate normally, when the outside temperature is below 14 °F (-10 °C). 3-162 When the Auto Defogging System operates, the indicator will illuminate. If a high amount of humidity is detected in the vehicle, the Auto Defogging System will be enabled. The following steps will be performed automatically: Step 1) The A/C button will turn ON. Step 2) The air intake control will change to Fresh mode. Step 3) The mode will be changed to defrost to direct airflow to the windshield. Step 4) The fan speed will be set to MAX. If the air conditioning is off or recirculated air position is manually selected while Auto Defogging System is ON, the Auto Defogging System Indicator will blink 3 times to signal that the manual operation has been canceled. To cancel or reset the Auto Defogging System Press the front windshield defroster button for 3 seconds when the POWER button is in the ON position. When the Auto Defogging System is canceled, the ADS OFF symbol will blink 3 times and ADS OFF will be displayed on the climate control information screen. When the Auto Defogging System is reset, the ADS OFF symbol will blink 6 times without a signal. i Information NOTICE Do not remove the sensor cover located on the upper end of the windshield glass. Damage to system parts could occur and may not be covered by your vehicle warranty. NOTICE To prevent damage to the rear window defroster conducting elements bonded to the inside surface of the rear window, never use sharp instruments or window cleaners containing abrasives to clean the window. If you want to defrost and defog the front windshield, refer to the "Windshield Defrosting and Defogging" section in this chapter. The defroster heats the window to remove frost, fog and thin ice from the interior and exterior of the rear window, while the vehicle is in the ready ( ) mode. • To activate the rear window defroster, press the rear window defroster button located in the center control panel. The indicator on the rear window defroster button illuminates when the defroster is ON. • To turn off the defroster, press the rear window defroster button again. i Information • If there is heavy accumulation of snow on the rear window, brush it off before operating the rear defroster. • The rear window defroster automatically turns off after approximately 20 minutes or when the POWER button is in the OFF position. Side view mirror defroster If your vehicle is equipped with the side view mirror defrosters, they will operate at the same time you turn on the rear window defroster. 3-163 3 Convenience features of your vehicle • When the air conditioning is turned on by Auto defogging system, if you try to turn off the air conditioning, the indicator will blink 3 times and the air conditioning will not be turned off. • To maintain the effectiveness and efficiency of the Auto Defogging System, do not select Recirculation mode while the system is operating. • When the Auto Defogging System is operating, the fan speed adjustment button, the temperature adjustment knob, and the air intake control button are all disabled. Rear Window Defroster Convenience features of your vehicle CLIMATE CONTROL ADDITIONAL FEATURES Automatic Ventilation (if equipped) Sunroof Inside Air Recirculation (if equipped) When the POWER button is in the ON position or when the vehicle is in the ready ( ) mode and temperature is below 59°F (15°C) with the recirculated air position selected more than five minutes, the air intake position will automatically change to the outside (fresh) air position. When the heater or air conditioning system is on with the sunroof opened, the fresh mode will be automatically selected. If you press the recirculation mode button with the sunroof open, recirculation mode activate but will only remain enabled for 3 minutes. After 3 minutes the air intake control will revert back to Fresh mode. When the sunroof is closed, the air intake position will return to the original position that was selected. To cancel or reset the Automatic Ventilation When the air conditioning system is on, select Face Level mode and press the recirculation mode button five times within three seconds while pressing A/C button. When the Automatic Ventilation feature is enabled, the recirculation button LED indicator will blink 6 times. When the Automatic Ventilation feature is disabled, the recirculation button LED indicator will blink 3 times. 3-164 STORAGE COMPARTMENT WARNING Center Console Storage Glove Box Never store cigarette lighters, propane cylinders, or other flammable/explosive materials in the vehicle. These items may catch fire and/or explode if the vehicle is exposed to hot temperatures for extended periods. 3 ALWAYS keep the storage compartment covers closed securely while driving. Items inside your vehicle are moving as fast as the vehicle. If you have to stop or turn quickly, or if there is a crash, the items may fly out of the compartment and may cause an injury if they strike the driver or a passenger. NOTICE OFE048070 To open : Grab and hold the latch (1) on the arm rest then lift the lid. OFE048071 To open: Pull the lever (1). WARNING ALWAYS close the glove box door after use. An open glove box door can cause serious injury to the passenger in an accident, even if the passenger is wearing a seat belt. To avoid possible theft, do not leave valuables in the storage compartments. 3-165 Convenience features of your vehicle WARNING Convenience features of your vehicle INTERIOR FEATURES Cup Holder Front WARNING Rear Placing any heavy objects other than cups or small beverages may damage the cup holder. ■ On center console OFE048074 OFE048075 ■ Above glove box Pull the armrest down to use the cup holders. WARNING • Avoid abrupt starting and OFE048073 Cups or small beverages cups may be placed in the cup holders. 3-166 braking when the cup holder is in use to prevent spilling your drink. If hot liquid spills, you could be burned. Such a burn to the driver could cause loss of vehicle control resulting in an accident. • Do not place uncovered or WARNING Keep cans or bottles out of direct sun light and do not put them in a hot vehicle. It may explode. Sunvisor • Keep your drinks sealed while driving to prevent spilling your drink. If liquid spills, it may get into the vehicle's electrical/electronic system and damage electrical/electronic parts. • When cleaning spilled liquids do not use hot air to blow out or dry the cup holder. This may damage the interior. 3 OTM048089 To use the sunvisor, pull it downward. To use the sunvisor to block the sun from the side window, pull it downward, release it from the bracket (1) and swing it to the side towards the window (2). To use the vanity mirror, pull down the sunvisor and slide the mirror cover (3). Adjust the sunvisor forward or backward (4) as needed. Use the ticket holder (5) to hold tickets. 3-167 Convenience features of your vehicle unsecured cups, bottles, cans, etc., in the cup holder containing hot liquid while the vehicle is in motion. Injuries may result in the event of a sudden stop or collision. • Only use soft cups in the cup holders. Hard objects can injure you in an accident. NOTICE Convenience features of your vehicle Close the vanity mirror cover securely and return the sunvisor to its original position after use. Power Outlet NOTICE WARNING For your safety, do not block your view when using the sunvisor. NOTICE Do not put several tickets in the ticket holder at one time. This could cause damage to the ticket holder. OFE048077 The power outlet is designed to provide power for mobile telephones or other devices designed to operate with vehicle electrical systems. The devices should draw less than 180 W with the vehicle in the ready ( ) mode. WARNING Avoid electrical shocks. Do not place your fingers or foreign objects (pin, etc.) into a power outlet or touch the power outlet with a wet hand. 3-168 To prevent damage to the Power Outlets : • Use the power outlet only when the vehicle is in the ready ( ) mode and remove the accessory plug after use. Using the accessory plug for prolonged periods of time with the vehicle off could cause the battery to discharge. • Only use 12V electric accessories which are less than 180 W in electric capacity. • Adjust the air-conditioner or heater to the lowest operating level when using the power outlet. • Close the cover when not in use. • Some electronic devices can cause electronic interference when plugged into a vehicle's power outlet. These devices may cause excessive audio static and malfunctions in other electronic systems or devices used in your vehicle. AC Inverter (if equipped) 3 OUMA046410 OFE048080N The AC inverter supplies 115V/150W electric power to operate electric accessories or equipments. i Information • Rated voltage : AC 115V • Maximum electric power : 150W • In order to avoid an electrical system failure, electric shock, etc., be sure to read owner's manual before use. • Be sure to close the cover except the time of use. 3-169 Convenience features of your vehicle • Push the plug in as far as it will go. If good contact is not made, the plug may overheat and the fuse may open. • Plug in battery equipped electrical/electronic devices with reverse current protection. The current from the battery may flow into the vehicle's electrical/electronic system and cause system malfunction. Convenience features of your vehicle WARNING To reduce a risk of serious or fatal injuries: • Do not use a heated electric device such as a coffeepot, toaster, heater, iron, etc. • Do not insert foreign objects into the outlet and do not touch the outlet as you may get shocked. • Do not let children touch the AC inverter. 3-170 NOTICE • To prevent the battery from being discharged, do not use the AC inverter while the vehicle is not in the ready ( ) mode. • When not using the AC inverter, make sure to close the AC inverter cover. • After using an electric accessory or equipment, pull the plug out. Leaving the accessory or equipment plugged in for a long time may cause battery discharge. • Do not use an electric accessory or equipment the power consumption of which is greater than 150W (115V). • Some electric accessories or equipments can cause electronic interference. It may cause excessive audio noise and malfunctions in other electric systems or devices in the vehicle. • Do not use broken electric accessories or equipments, which may damage the AC inverter and electrical systems of the vehicle. • Do not use two or more electric accessories or equipments at the same time. It may cause damage to the electrical systems of the vehicle. • When the input voltage is lower, outlet LED will blink and the AC inverter will turn off automatically. If the input voltage goes up to normal, the AC inverter will turn on again. USB Charger The USB charger is designed to recharge batteries of small size electrical devices using a USB cable. The electrical devices can be recharged when the POWER button is ON. Insert the USB charger into the USB port, and re-charge a smart phone or a tablet PC. The battery charging state may be monitored on the electrical device. Disconnect the USB cable from the USB port after use. Wireless Cellular Phone Charging System 3 OFE048078 On certain models, the vehicle comes equipped with a wireless cellular phone charger. The system is available when all doors are closed, and when the POWER button is ON. 3-171 Convenience features of your vehicle OFE048079 • A smart phone or a tablet PC may get warmer during the re-charging process. It does not indicate any malfunction with the charging system. • A smart phone or a tablet PC, which adopts a different re-charging method, may not be properly re-charged. In this case, use an exclusive charger of your device. • The charging terminal is only to recharge a device. Do not use the charging terminal either to turn ON an audio or to play media. Convenience features of your vehicle To charge a cellular phone The wireless cellular phone charging system charges only the Qi-enabled cellular phones ( ). Read the label on the cellular phone accessory cover or visit your cellular phone manufacturer's website to check whether your cellular phone supports the Qi technology. The wireless charging process starts when you put a Qi-enabled cellular phone on the wireless charging unit. 1. Remove other items, including the smart key, from the wireless charging unit. If not, the wireless charging process may be interrupted. Place the cellular phone on the center of the charging pad ( ). 2. The indicator light is orange when the cellular phone is charging. The indicator light turns green when phone charging is complete. 3. You can turn ON or OFF the wireless charging function in the Vehicle Settings mode on the Infotainment system screen. For further information, refer to the separately supplied "Navigation manual". 3-172 If your cellular phone is not charging: - Slightly change the position of the cellular phone on the charging pad. - Make sure the indicator light is orange. The indicator light will blink orange for 10 seconds if there is a malfunction in the wireless charging system. In this case, temporarily stop the charging process, and re-attempt to charge your cellular phone again. The system warns you with a message on the LCD display if the cellular phone is still on the wireless charging unit after the POWER button is in the OFF position and the front door is opened. i Information For some manufacturer's cellular phones, the system may not warn you even though the cellular phone is left on the wireless charging unit. This is due to the particular characteristic of the cellular phone and not a malfunction of the wireless charging. NOTICE • The wireless cellular phone charging system may not support certain cellular phones, which are not verified for the Qi specification ( ). • When placing your cellular phone on the charging mat, position the phone in the middle of the mat for optimal charging performance. If your cell phone is off to the side, the charging rate may be less and in some cases the cell phone may experience higher heat conduction. • In some cases, the wireless charging may stop temporarily when the Smart Key is used, either when starting the vehicle or locking/unlocking the doors, etc. • When charging certain cellular phones, the charging indicator may not change to green when the cell phone is fully charged. • When any cellular phone without a wireless charging function or a metallic object is placed on the charging pad, a small noise may sound. This small sound is due to the vehicle discerning compatibility of the object placed on the charging pad. It does not affect your vehicle or the cellular phone in any way. Clock WARNING Do not attempt to adjust the clock while driving. Doing so may result in distracted driving which may lead to an accident involving personal injury or death. i Information If the POWER button is in the OFF position, the charging also stops. i Information This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. Select the Vehicle Settings menu on the Infotainment system screen ➟ Select [Date/Time]. • GPS time: Displays time according to the received GNSS time. • Daylight saving time : The clock is adjusted forward one hour. • Time format : Switches to 12 hour or 24 hour. For more details, refer to the separately supplied Navigation manual. 3-173 3 Convenience features of your vehicle • The wireless charging process may temporarily stop, when temperature abnormally increases inside the wireless cellular phone charging system. Stop the charging cellular phone and wait until temperature falls to a certain level. • The wireless charging process may temporarily stop when there is any metallic item, such as a coin, between the wireless cellular phone charging system and the cellular phone. • When charging some cellular phones with a self-protection feature, the wireless charging speed may decrease and the wireless charging may stop. • If the cellular phone has a thick cover, the wireless charging may not be possible. • If the cell phone is not completely contacting the charging pad, wireless charging may not operate properly. • Some magnetic items like credit cards, phone cards or rail tickets may be damaged if left with the cellular phone during the charging process. Convenience features of your vehicle Coat Hook WARNING OOS047065 These hangers are not designed to hold large or heavy items. 3-174 Floor Mat Anchor(s) OOS047066 Do not hang other objects such as hangers or hard objects except clothes. Also, do not put heavy, sharp or breakable objects in the clothes pockets. In an accident or when the curtain air bag is inflated, it may cause vehicle damage or personal injury. OFE048081 ALWAYS use the Floor Mat Anchors to attach the front floor mats to the vehicle. The anchors on the front floor carpet keep the floor mats from sliding forward. WARNING Do not overlay additional mats or liners over the floor mats. If using All Weather mats, remove the carpeted floor mats before installing them. Only use floor mats designed to connect to the anchors. WARNING WARNING Avoid eye injury. DO NOT overstretch the luggage net. ALWAYS keep your face and body out of the luggage net's recoil path. DO NOT use the luggage net when the strap has visible signs of wear or damage. Use the luggage net to keep only light items from shifting in the luggage compartment. OFE048082 To keep items from shifting in the luggage compartment, you can use the 4 holders located in the luggage board to attach the luggage net. Make sure the luggage net is securely attached to the holders in the luggage board. 3-175 3 Convenience features of your vehicle The following must be observed when installing ANY floor mat to the vehicle. • Ensure that the floor mats are securely attached to the vehicle's floor mat anchor(s) before driving the vehicle. • Do not use ANY floor mat that cannot be firmly attached to the vehicle's floor mat anchors. • Do not stack floor mats on top of one another (e.g. all-weather rubber mat on top of a carpeted floor mat). Only a single floor mat should be installed in each position. IMPORTANT - Your vehicle was manufactured with driver’s side floor mat anchors that are designed to securely hold the floor mat in place. To avoid any interference with pedal operation, HYUNDAI recommends that the HYUNDAI floor mat designed for use in your vehicle be installed. Luggage Net Holder (if equipped) Convenience features of your vehicle To use the cargo security screen Cargo Security Screen When the cargo security screen is not in use: 1. Pull the cargo security screen backward and up to release it from the guides. 2. The cargo security screen will automatically slide back in. i Information OFE048083 OFE048084 Use the cargo security screen to cover items stored in the cargo area. 1. Pull the cargo security screen towards the rear of the vehicle by the handle (1). 2. Insert the guide pin (2) into the guide (3). i Information Pull out the cargo security screen with the handle in the center to prevent the guide pin from falling out of the guide. 3-176 The cargo security screen may not automatically slide back in if the cargo security screen is not fully pulled out. Pull the cargo screen out all the way and then slowly allow the screen to retract back into the mechanism. To remove the cargo security screen WARNING • Do not place objects on the 3 Convenience features of your vehicle OFE048085 1. Push one side of the cargo screen inward to compress the spring mechanism and release the screen from the vehicle. 2. While the mechanism is compressed, pull out the cargo security screen. cargo security screen. Such objects may be thrown about inside the vehicle and possibly injure vehicle occupants during an accident or when braking. • Never allow anyone to ride in the luggage compartment. It is designed for luggage only. • Maintain the balance of the vehicle and locate the weight as forward as possible. 3-177 Convenience features of your vehicle EXTERIOR FEATURES Roof Side Rails (if equipped) NOTICE • The vehicle center of gravity will • When carrying cargo on the roof rack, take the necessary precautions to make sure the cargo does not damage the roof of the vehicle. • When carrying large objects on the roof rack, make sure they do not exceed the overall roof length or width. WARNING OFE048086 If your vehicle comes equipped with roof side rails, then roof rack crossbars can be installed on top of your vehicle. The roof rack crossbars are an accessory and are available at your local HYUNDAI dealer. NOTICE If the vehicle is equipped with a sunroof, be sure not to position cargo onto the roof rack in such a way that it could interfere with sunroof operation. 3-178 • The following specification is the maximum weight that can be loaded onto the roof rack. Distribute the load as evenly as possible onto the roof rack and secure the load firmly. Loading cargo or luggage in excess of the specified weight limit on the roof rack may damage your vehicle. ROOF RACK 220 lbs. (100kg) EVENLY DISTRIBUTED be higher when items are loaded onto the roof rack. Avoid sudden starts, braking, sharp turns, abrupt maneuvers or high speeds that may result in loss of vehicle control or rollover resulting in an accident. • Always drive slowly and turn corners carefully when carrying items on the roof rack. Severe wind updrafts, caused by passing vehicles or natural causes, can cause sudden upward pressure on items loaded on the roof rack. This is especially true when carrying large, flat items such as wood panels or mattresses. This could cause the items to fall off the roof rack and cause damage to your vehicle or others around you. • To prevent damage or loss of cargo while driving, check frequently before or while driving to make sure the items on the roof rack are securely fastened. Infotainment System Infotainment system ..............................................4-2 USB and iPod® port..........................................................4-2 Antenna ...............................................................................4-2 Steering wheel audio controls .......................................4-3 Bluetooth® Wireless Technology ..................................4-4 Blue Link® center .............................................................4-4 Audio / Video / Navigation system (Infotainment) ..4-4 4 Infotainment System INFOTAINMENT SYSTEM i Information Antenna Shark fin antenna USB and iPod® port • If you install an aftermarket HID headlight, your vehicle's audio and electronic devices may malfunction. • Prevent chemicals such as perfume, cosmetic oil, sun cream, hand cleaner, and air freshener from contacting the interior parts because they may cause damage or discoloration. OFE048089 You can use an USB port to plug in an USB and an iPod® port. i Information When using a portable audio device connected to the power outlet, noise may occur during playback. If this happens, use the portable audio device's power source. ❈ iPod® is a trademark of Apple Inc. 4-2 OFE048087 The shark fin antenna will receive the AM, FM broadcast signals, SXM, LTE and transmit data. Steering Wheel Audio Control NOTICE Do not operate multiple audio remote control buttons simultaneously. VOLUME (VOL + / - ) (1) • Press the VOLUME (+) switch up to increase volume. • Press the VOLUME (-) switch down to decrease volume. / ) (2) MODE (3) If the SEEK/PRESET switch is pressed up or down and held for 0.8 second or more, it will function in the following modes: Press the MODE button to toggle through Radio, SXM, or Media mode. RADIO mode It will function as the AUTO SEEK select button. It will SEEK until you release the button. • Press the MUTE button to mute the sound. • Press the MUTE button again to activate the sound. MEDIA mode It will function as the FF/RW button. If the SEEK/PRESET switch is pressed up or down, it will function in the following modes: MUTE ( ) (4) 4 i Information Detailed information for audio control buttons are described in the separately supplied manual with the vehicle. RADIO mode It will function as the PRESET STATION UP/DOWN button. MEDIA mode It will function as the TRACK UP/ DOWN button. 4-3 Infotainment System OFE048088 SEEK/PRESET ( Infotainment System Bluetooth® Wireless Technology Audio / Video / Navigation system (Infotainment) (1) Call / Answer button (2) Call end button (3) Microphone Detailed information for the Bluetooth hands-free is described in a separately supplied manual with the vehicle. Blue Link® center OFE048090 OFE048476N OFE048091N 4-4 For details, refer to the Blue Link® Owner's Guide, Navigation Manual or Audio Manual. Detailed information for the Infotainment system is described in a separately supplied manual with the vehicle. Driving your vehicle Before Driving ........................................................5-4 Drive Mode Integrated Control System ............5-37 Before Entering the Vehicle ...........................................5-4 Before Starting ..................................................................5-4 Drive mode change alert...............................................5-38 ECO mode climate control ............................................5-38 Power Button..........................................................5-6 Forward Collision-avoidance Assist (FCA) System ...................................................................5-39 POWER Button Positions.................................................5-7 Starting the Vehicle ..........................................................5-9 Turning Off the Vehicle .................................................5-10 Reduction Gear.....................................................5-11 Reduction Gear Operation ............................................5-11 Parking...............................................................................5-13 LCD Display Messages ...................................................5-13 Good Driving Practices ..................................................5-16 Paddle Shifter (Regenerative Braking Control)..................................................................5-17 Braking System ....................................................5-18 Power Brakes ...................................................................5-18 Disc Brake Wear Indicator ............................................5-19 Electronic Parking Brake (EPB)...................................5-19 Auto Hold ..........................................................................5-25 Anti-lock Brake System (ABS) ....................................5-29 Electronic Stability Control (ESC)................................5-31 Vehicle Stability Management (VSM).........................5-34 Hill-Start Assist Control (HAC) ....................................5-36 Good Braking Practices.................................................5-36 System Setting and Activation.....................................5-39 FCA Warning Message and System Control ............5-41 FCA Sensor (Front Radar/Front View Camera).......5-44 System Malfunction .......................................................5-46 Limitations of the System.............................................5-47 Blind-Spot Collision Warning/ Blind-Spot Collision-avoidance Assist..............5-53 System Description .........................................................5-53 System Setting and Activation.....................................5-54 Warning and System Control .......................................5-57 Detecting Sensor (Front View Camera and Rear Corner Radar) ........................................................5-59 Limitations of the System.............................................5-62 Rear Cross-traffic Collision Warning (RCCW)/ Rear Cross-traffic Collision-avoidance Assist (RCCA) ...................................................................5-67 System Description .........................................................5-67 System Setting and Activation.....................................5-68 Warning and System Control .......................................5-69 Limitations of the System.............................................5-73 5 Blind-Spot View Monitor System......................5-77 Operating conditions ......................................................5-77 Blind-Spot View Monitor system warning ...............5-78 Lane Keeping Assist (LKA) System ...................5-79 LKA System Operation...................................................5-80 Warning Light and Message.........................................5-83 Limitations of the System.............................................5-85 LKA System Function Change......................................5-86 Declaration of conformity ...............................5-115 Leading Vehicle Departure Alert .....................5-116 Lane Following Assist (LFA) System.................5-87 Hazardous Driving Conditions....................................5-118 Rocking the Vehicle......................................................5-118 Smooth Cornering.........................................................5-119 Driving at Night .............................................................5-119 Driving in the Rain ........................................................5-119 Driving in Flooded Areas.............................................5-120 Highway Driving ............................................................5-120 Reducing the Risk of a Rollover ...............................5-121 LFA operation...................................................................5-88 Warning message ............................................................5-90 Limitations of the system .............................................5-92 5 Smart Cruise Control Vehicle-to-Vehicle Distance...........................................................................5-105 Sensor to Detect Distance to the Vehicle Ahead .5-108 Limitations of the System...........................................5-110 Driver Attention Warning (DAW) System.........5-94 System Setting and Activation ..................................5-116 Special Driving Conditions ................................5-118 System Setting and Activation.....................................5-94 Resetting the System .....................................................5-95 System Standby...............................................................5-96 System Malfunction .......................................................5-96 Winter Driving ....................................................5-122 Smart Cruise Control With Stop & Go System .............................................................5-98 Snow or Icy Conditions................................................5-122 Winter Precautions.......................................................5-124 Smart Cruise Control Switch ........................................5-99 To Adjust the Sensitivity of Smart Cruise Control ....................................................5-100 To Convert to Cruise Control Mode .........................5-100 Smart Cruise Control Speed .......................................5-101 Vehicle Load Limit..............................................5-126 Tire Loading Information Label.................................5-126 Trailer Towing.....................................................5-131 WARNING Keep the air intakes clear. To assure proper operation of the ventilation system, keep the ventilation air intakes located in front of the windshield clear of snow, ice, leaves, or other obstructions. If you must drive with the liftgate open: Close all windows. Open instrument panel air vents. Set the air intake control at "Fresh", the air flow control at "Floor" or "Face", and the fan control set to high. 5 Driving your vehicle 5-3 Driving your vehicle BEFORE DRIVING WARNING CALIFORNIA PROPOSITION 65 WARNING A wide variety of automobile components including components found in the interior furnishings in a vehicle, contain or emit harmful chemicals known to the State of California to cause cancer and birth defects and reproductive harm. In addition, certain fluids contained in vehicles and certain products of components contain or emit chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. 5-4 Before Entering the Vehicle Before Starting • Be sure all windows, outside mirror(s), and outside lights are clean and unobstructed. • Remove frost, snow, or ice. • Visually check the tires for uneven wear and damage. • Check under the vehicle for any sign of leaks. • Be sure there are no obstacles behind you if you intend to back up. • Make sure the hood, the liftgate, and the doors are securely closed and locked. • Adjust the position of the seat and steering wheel. • Adjust the inside and outside rearview mirrors. • Verify all the lights work. • Fasten your seatbelt. Check that all passengers have fastened their seatbelts. • Check the gauges and indicators in the instrument panel and the messages on the instrument display when the POWER button is in the ON position. • Check that any items you are carrying are stored properly or fastened down securely. WARNING NEVER drink or take drugs and drive. Drinking or taking drugs and driving is dangerous and may result in an accident and SERIOUS INJURY or DEATH. Drunk driving is the number one contributor to the highway death toll each year. Even a small amount of alcohol will affect your reflexes, perceptions and judgment. Just one drink can reduce your ability to respond to changing conditions and emergencies and your reaction time gets worse with each additional drink. Driving while under the influence of drugs is as dangerous as or more dangerous than driving under the influence of alcohol. You are much more likely to have a serious accident if you drink or take drugs and drive. If you are drinking or taking drugs, don't drive. Do not ride with a driver who has been drinking or taking drugs. Choose a designated driver or call a taxi. 5 Driving your vehicle To reduce the risk of SERIOUS INJURY or DEATH, take the following precautions: • ALWAYS wear your seat belt. All passengers must be properly belted whenever the vehicle is moving. For more information, refer to "Seat Belts" in chapter 2. • Always drive defensively. Assume other drivers or pedestrians may be careless and make mistakes. • Stay focused on the task of driving. Driver distraction can cause accidents. • Leave plenty of space between you and the vehicle in front of you. WARNING 5-5 Driving your vehicle POWER BUTTON If the vehicle is still moving, you can restart the vehicle without depressing the brake pedal by pressing the POWER button with the gear in the N (Neutral) position. WARNING To reduce the risk of SERIOUS INJURY or DEATH, take the following precautions: • NEVER allow children or any person who is unfamiliar with the vehicle to touch the POWER button or related parts. Unexpected and sudden vehicle movement can occur. • NEVER reach through the steering wheel for the POWER button or any other control, while the vehicle is in motion. The presence of your hand or arm in this area may cause a loss of vehicle control resulting in an accident. 5-6 WARNING OFE058001 Whenever the front door is opened, the POWER button will illuminate and will go off 30 seconds after the door is closed. WARNING To turn the vehicle off in an emergency: Press and hold the POWER button for more than two seconds OR Rapidly press and release the POWER button three times (within three seconds). • NEVER press the POWER button while the vehicle is in motion except in an emergency. This will result in the vehicle turning off and loss of power assist for the steering and brake systems. This may lead to loss of directional control and braking function, which could cause an accident. • Before leaving the driver's seat, always make sure the gear is in the P (Park) position, set the parking brake, press the POWER button to the OFF position, and take the Smart Key with you. Unexpected vehicle movement may occur if these precautions are not followed. POWER Button Positions Button Position Action OFF To turn off the vehicle, press the POWER button with the gear in P (Park). Also, the vehicle will turn off when the POWER button is pressed with the gear in D (Drive) or R (Reverse) because the gear automatically shifts to the P (Park) position. But, when it is pressed in N (Neutral), the POWER button will go to the ACC position. Press the POWER button when the button is in the OFF position without depressing the brake pedal. Some electrical accessories are usable. 5 Driving your vehicle ACC Notice 5-7 Driving your vehicle Button Position ON START 5-8 Action Press the POWER button while it is in the ACC position without depressing the brake pedal. Notice Do not leave the POWER button in the ON position when the vehicle is not in the ready ( ) mode to prevent the battery from discharging. To start the vehicle, depress the brake pedal If you press the POWER button without and press the POWER button with the gear depressing the brake pedal, the vehicle does in the P (Park) position. not start and the POWER button changes as follows: OFF → ACC → ON → OFF or ACC Starting the Vehicle WARNING • Always wear appropriate shoes when operating your vehicle. Unsuitable shoes, such as high heels, ski boots, sandals, flipflops, etc., may interfere with your ability to use the brake and accelerator pedals. • Do not start the vehicle with the accelerator pedal depressed. The vehicle can move and lead to an accident. i Information i Information • Always start the vehicle with your foot on the brake pedal. • If ambient temperature is low, the " " indicator may remain illuminated longer than the normal amount of time. 5-9 5 Driving your vehicle • The vehicle will start by pressing the POWER button, only when the smart key is in the vehicle. • Even if the smart key is in the vehicle, and when it is far away from the driver, the vehicle may not start. • When the POWER button is in the ACC or ON position, any door is open, the system checks for the smart key. When the smart key is not in the vehicle, the " " indicator will blink and the warning "Key not in vehicle" will come on. When all doors are closed, the chime will also sound for about 5 seconds. Keep the smart key in the vehicle when in the ACC position or if the vehicle is in the ready ( ) mode. 1. Always carry the smart key with you. 2. Make sure the parking brake is applied. 3. Make sure the gear is in P (Park). 4. Depress the brake pedal. 5. Press the POWER button. If the vehicle starts, the " " indicator will come on. Driving your vehicle NOTICE Emergency starting Turning Off the Vehicle 1. 2. 3. 4. Depress the brake pedal fully. Shift to P (Park). Apply the parking brake. Press the POWER button to turn the vehicle off. 5. Make sure the " " indicator light on the instrument cluster is turned off. To prevent damage to the vehicle: If the " " indicator turns off while you are in motion, do not attempt to shift to the P (Park) position. NOTICE To prevent damage to the vehicle: When the stop lamp fuse is blown, you cannot normally start the vehicle. Replace the fuse with a new one. If you are not able to replace the fuse, you can start the vehicle by pressing and holding the POWER button for 10 seconds with the POWER button in the ACC position. Do not press the POWER button for more than 10 seconds except when the stop lamp fuse is blown. For your safety always depress the brake pedal before starting the vehicle. 5-10 CAUTION OFE058004 If the smart key battery is weak or the smart key does not work correctly, you can start the vehicle by pressing the POWER button with the smart key in the direction of the picture above. If the " " indicator light on the instrument cluster is still on, the vehicle is not turned off and can move when the gear is in any position except P (Park). REDUCTION GEAR Gear position Reduction Gear Operation WARNING OFE058005L Select gear positions by pressing the shift button. For your safety, always depress the brake pedal while shifting to another gear. OCN7040013N The indicator in the instrument cluster displays the gear position when the POWER button is in the ON position. 5-11 5 Driving your vehicle To reduce the risk of serious injury or death: • ALWAYS check the surrounding areas near your vehicle for people, especially children, before shifting a vehicle into D (Drive) or R (Reverse). • Before leaving the driver's seat, always make sure the gear is in the P (Park) position, then set the parking brake, and place the POWER button in the OFF position. Unexpected and sudden vehicle movement can occur if these precautions are not followed. Driving your vehicle P (Park) Always come to a complete stop before shifting into P (Park). To shift the gear from R (Reverse), N (Neutral) or D (Drive) to P (Park), press the [P] button. If you turn off the vehicle in D (Drive) or R (Reverse), the gear automatically shifts to P (Park). WARNING • Shifting into P (Park) while the vehicle is in motion may cause you to lose control of the vehicle. • After the vehicle has stopped, always make sure the gear is in P (Park), apply the parking brake, and turn the vehicle off. • Do not use the P (Park) position in place of the parking brake. 5-12 R (Reverse) Use this position to drive the vehicle backward. To shift to R (Reverse), press the [R] button while depressing the brake pedal. N (Neutral) The wheels and gear are not engaged. To shift to N (Neutral), press the [N] button while depressing the brake pedal. Always depress the brake pedal when you are shifting from N (Neutral) to another gear. In N (Neutral), if the driver attempts to turn off the vehicle, the gear remains in N (Neutral) and the POWER button will be in the ACC position. To turn off the vehicle from the ACC position, press the [P] button within 3 minutes. The vehicle will shift to P (Park) and turn off. When the driver’s door is opened within 3 minutes with the POWER button in the ACC position and the gear in N (Neutral), the vehicle is automatically turned OFF and shifted to the P (Park) position. D (Drive) This is the normal driving position. To shift to D (Drive), press the [D] button while depressing the brake pedal. Shift-lock system Parking For your safety, your vehicle has a shift-lock system which prevents shifting the gear from P (Park) or N (Neutral) into R (Reverse) or D (Drive) unless the brake pedal is depressed. To shift from P (Park) or N (Neutral) into R (Reverse) or D (Drive) : 1. Depress and hold the brake pedal. 2. Start the vehicle or place the POWER button in the ON position. 3. Press the R (Reverse) or D (Drive) button. Always come to a complete stop and continue to depress the brake pedal. Shift to the P (Park) position, apply the parking brake, and place the POWER button in the OFF position. Take the Key with you when exiting the vehicle. You cannot shift the gear when the battery is discharged. Jump start your vehicle (refer to “Jump Starting” in chapter 6) or contact an authorized HYUNDAI dealer. OFE051008N The message appears on the LCD display when driving speed is too fast to shift the gear. Decrease the vehicle speed or slow down before shifting the gear. 5-13 5 Driving your vehicle When the battery (12 V) is discharged LCD Display Messages Shifting conditions not met Driving your vehicle Press brake pedal to change gear OFE051009N The message appears on the LCD display, when the brake pedal is not depressed while shifting the gear. Depress the brake pedal and then shift the gear. 5-14 Shift to P after stopping Gear already selected OFE051010N OFE051014N The message appears on the LCD display when the gear is shifted to P (Park) while the vehicle is moving. Stop the vehicle before shifting to P (Park). The message appears on the LCD display when the selected gear button is pressed again. Shift button held down Check shift controls PARK malfunction. Engage parking brake when parking vehicle OFE051016N The message appears on the LCD display when the shift button is continuously pressed or there is problem with the button. Make sure that there is no object over the shift button. If the problem persists, immediately have the vehicle inspected by an authorized HYUNDAI dealer. The message appears on the LCD display when there is problem with the shift buttons. Immediately have the vehicle inspected by an authorized HYUNDAI dealer. 5 OFE041530N The message appears on the LCD display when there is problem with function engaging P (Park) position. Immediately have the vehicle inspected by an authorized HYUNDAI dealer. 5-15 Driving your vehicle OFE051015N Driving your vehicle Good Driving Practices • Never shift to P (Park) or N (Neutral) to any other position with the accelerator pedal depressed. • Never shift to P (Park) when the vehicle is in motion. Be sure the vehicle is completely stopped before you attempt to shift into R (Reverse) or D (Drive). • Do not shift to N (Neutral) when driving. Doing so may result in an accident. • Do not drive with your foot resting on the brake pedal. Even light, but consistent pedal pressure can result in the brakes overheating, brake wear and possibly even brake failure. • Always apply the parking brake when leaving the vehicle. Do not depend on placing the gear in P (Park) to keep the vehicle from moving. 5-16 • Exercise extreme caution when driving on a slippery surface. Be especially careful when braking, accelerating or shifting gears. On a slippery surface, an abrupt change in vehicle speed can cause the drive wheels to lose traction and may cause loss of vehicle control resulting in an accident • Optimum vehicle performance and economy is obtained by smoothly depressing and releasing the accelerator. WARNING To reduce the risk of SERIOUS INJURY or DEATH: • ALWAYS wear your seat belt. In a collision, an unbelted occupant is significantly more likely to be seriously injured or killed than a properly belted occupant. • Avoid high speeds when cornering or turning. • Do not make quick steering wheel movements, such as sharp lane changes or fast, sharp turns. • The risk of rollover is greatly • • • • increased if you lose control of your vehicle at highway speeds. Loss of control often occurs if two or more wheels drop off the roadway and the driver over steers to reenter the roadway. In the event your vehicle leaves the roadway, do not steer sharply. Instead, slow down before pulling back into the travel lanes. HYUNDAI recommends you follow all posted speed limits. When driving uphill or downhill, always shift to D (Drive) for driving forward or shift to R (Reverse) for driving rearwards. After selecting D (Drive) or R (Reverse), check the gear position indicated on the cluster before driving. If the vehicle moves in the opposite direction of the selected gear, the engine may turn off and a serious accident might occur due to degraded brake performance. PADDLE SHIFTER (REGENERATIVE BRAKING CONTROL) i Information The paddle shifter does not operate when: • Both Paddle shifters are pulled at the same time. • The Smart Cruise Control system is activated. • The vehicle is shifted to P (Park), R (Reverse) and N (Neutral). OFE058017 NOTICE If the battery is fully charged when descending down a long or steep hill, the regenerative braking is not working even though operating the paddle shifter. In this case, depress the brake pedal to brake the vehicle. This is normal and does not indicate a problem with your paddle shifter and brakes. OFE051018N The selected regenerative braking rate is displayed on the instrument cluster. What Does Regenerative Braking Do? It uses the electric motor when decelerating or braking which transforms vehicle motion (kinetic energy) to electrical energy to charge the high voltage batteries. 5-17 5 Driving your vehicle The paddle shifter is used to adjust the regenerative braking rate from 0 to 3 during decelerating or braking. • Left side ( ): Increases regenerative braking and deceleration. • Right side ( ): Decreases regenerative braking and deceleration. • Pull and hold the left side paddle shifter to change to 0. • Pull and hold the left side paddle shifter to change to 3. Driving your vehicle BRAKING SYSTEM Power Brakes Your vehicle has power-assisted brakes that adjust automatically through normal usage. If the power is not supplied such as battery discharge, the power assist for the brakes will not work. You can still stop your vehicle by applying greater force to the brake pedal than typical. The stopping distance, however, will be longer than with power brakes. Do not pump the brake pedal when the power assist has been interrupted. i Information • When the brake pedal is depressed under certain driving conditions or weather conditions, you may temporarily hear a noise. This is normal and does not indicate a problem with your brakes. 5-18 • While driving on a road with deicing chemicals, brake noise or abnormal tire wear may occur due to deicing chemicals. In a safe traffic condition, additionally apply the brakes to remove deicing chemicals on the brake discs and pads. WARNING Take the following precautions: • Do not drive with your foot resting on the brake pedal. This will create abnormal high brake temperatures, excessive brake lining and pad wear, and increased stopping distances. • When descending down a long or steep hill, use the paddle shifter (left side lever) to increase regenerative braking control in order to control your speed without using the brake pedal excessively. Applying the brakes continuously will cause the brakes to overheat and could result in a temporary loss of braking performance. • Wet brakes may impair the vehicle's ability to safely slow down; the vehicle may also pull to one side when the brakes are applied. Applying the brakes lightly will indicate whether they have been affected in this way. Always test your brakes in this fashion after driving through deep water. To dry the brakes, lightly tap the brake pedal to heat up the brakes while maintaining a safe forward speed until brake performance returns to normal. Avoid driving at high speeds until the brakes function correctly. NOTICE When your brake pads are worn and new pads are required, you will hear a high pitched warning sound from your front or rear brakes. You may hear this sound come and go or it may occur whenever you depress the brake pedal. Electronic Parking Brake (EPB) Applying the parking brake NOTICE To avoid costly brake repairs, do not continue to drive with worn brake pads. i Information Always replace brake pads as complete front or rear axle sets. 5 OFE058019 To apply the EPB (Electronic Parking Brake): 1. Depress the brake pedal. 2. Pull the EPB switch upwards. Make sure the Parking Brake Warning Light comes on. With the AUTO HOLD feature enabled, the EPB is automatically applied when the vehicle is shut off. 5-19 Driving your vehicle • Do not continue depressing the brake pedal if the " " indicator is OFF. The battery may be discharged. • Noise and vibration generated during braking is normal. • Under normal operation, electric brake pump noise and motor vibration may occur temporarily in below cases. - When the pedal is depressed suddenly. - When the pedal is repeatedly depressed in short intervals. - When the ABS function is activated while braking. Disc Brake Wear Indicator Driving your vehicle However, if the Auto Hold function is not activated, the EPB is not automatically applied even though the vehicle stops and turned off. Releasing the parking brake WARNING To reduce the risk of SERIOUS INJURY or DEATH, do not operate the parking brake while the vehicle is moving except in an emergency situation. It could damage the brake system and lead to an accident. 5-20 OFE058020 To release the EPB (Electronic Parking Brake), press the EPB switch in the following condition: • Have the POWER button in the ON position. • Depress the brake pedal. Make sure the Parking Brake Warning Light goes off. To release EPB (Electronic Parking Brake) automatically: • Shifted to P (Park) With the vehicle in the ready ( ) mode depress the brake pedal and shift out of P (Park) to R (Reverse), D (Drive). • Shifted to N (Neutral) With the vehicle in the ready ( ) mode depress the brake pedal and shift out of N (Neutral) to R (Reverse) or D (Drive). • Under the following conditions 1. Start the vehicle. 2. Fasten the driver's seat belt. 3. Close the driver's door, hood and liftgate. 4. Depress the accelerator pedal while the gear is in D (Drive) or R (Reverse). The Parking Brake Warning Light should be turned off when the EPB is released. i Information • For your safety, you can engage the EPB even though the POWER button is in the OFF position, but you cannot release it. • For your safety, depress the brake pedal and release the parking brake manually with the EPB switch when you drive downhill or when backing up the vehicle. EPB (Electronic Parking Brake) may be automatically applied when: • Requested by other systems • If the driver turns the vehicle off while Auto Hold is operating, EPB will be automatically applied. Warning messages NOTICE OFE061038N To release EPB, fasten seatbelt and close door, hood and liftgate • If you try to drive with the EPB applied, a warning will sound and a message will appear. • If the driver's seat belt is not fastened and the hood or liftgate is opened, a warning will sound and a message will appear. • If there is a problem with the vehicle, a warning may sound and a message may appear. If the situation occurs, depress the brake pedal and release EPB by pressing the EPB switch. 5-21 5 Driving your vehicle • If the parking brake warning light is still on even though the EPB has been released, have the system checked by an authorized HYUNDAI dealer. • Do not drive your vehicle with the EPB applied. It may cause excessive brake pad and brake rotor wear. Driving your vehicle WARNING • To prevent unintentional movement when stopped and leaving the vehicle, do not use the P (Park) position in place of the parking brake. Set the parking brake and make sure the vehicle is securely positioned in P (Park). • Never allow anyone who is unfamiliar with the vehicle to touch the parking brake. If the parking brake is released unintentionally, serious injury may occur. • All vehicles should always have the parking brake fully engaged when parking to avoid inadvertent movement of the car which can injure occupants or pedestrians. 5-22 NOTICE • A click sound may be heard while operating or releasing the EPB, but these conditions are normal and indicate that the EPB is functioning properly. • When leaving your keys with a parking lot attendant or valet, make sure to inform him/her how to operate the EPB. • The EPB may malfunction if you drive with the EPB applied. • When you automatically release EPB by depressing the accelerator pedal, depress it slowly. OIK060067L AUTO HOLD turning Off! Press brake pedal When the conversion from Auto Hold to EPB is not working properly a warning will sound and a message will appear. EPB malfunction indicator The EPB malfunction indicator may illuminate when the ESC (Electronic Stability Control) indicator comes on to indicate that the ESC is not working properly, but it does not indicate a malfunction of the EPB. NOTICE OIK060069L OFE041531N This warning light illuminates if the POWER button is changed to the ON position and goes off in approximately 3 seconds if the system is operating normally. If the EPB malfunction indicator remains on, comes on while driving, or does not come on when the POWER button is changed to the ON position, this indicates that the EPB may have malfunctioned. If this occurs, have the system checked by an authorized HYUNDAI dealer. 5-23 5 Driving your vehicle Parking brake automatically engaged If the EPB is applied while Auto Hold is activated, a warning will sound and a message will appear. • If the EPB warning light is still on, have the system checked by an authorized HYUNDAI dealer. • If the parking brake warning light does not illuminate or blinks even though the EPB switch was pulled up, the EPB may not be applied. • If the parking brake warning light blinks when the EPB warning light is on, press the switch, then pull it up. Once more press it back to its original position and pull it back up. If the EPB warning does not go off, have the system checked by an authorized HYUNDAI dealer. Driving your vehicle Parking brake warning light Emergency braking Check the Parking Brake Warning Light by placing the POWER button to the ON position (do not start the vehicle). This light will be illuminated when the parking brake is applied with the POWER button in the START or ON position. Before driving, be sure the parking brake is released and the Brake Warning Light is OFF. If the Parking Brake Warning Light remains on after the parking brake is released while the vehicle is in the ready ( ) mode, there may be a malfunction in the brake system. Immediate attention is necessary. If at all possible, cease driving the vehicle immediately. If that is not possible, use extreme caution while operating the vehicle and only continue to drive the vehicle until you can reach a safe location. If there is a problem with the brake pedal while driving, emergency braking is possible by pulling up and holding the EPB switch. Braking is possible only while you are holding the EPB switch. 5-24 WARNING Do not operate the parking brake while the vehicle is moving except in an emergency situation. i Information During emergency braking by the EPB, the parking brake warning light will illuminate to indicate that the system is operating. NOTICE If you continuously notice a noise or burning smell when the EPB is used for emergency braking, have the system checked by an authorized HYUNDAI dealer. When the EPB (Electronic Parking Brake) does not release If the EPB does not release normally, contact an authorized HYUNDAI dealer by loading the vehicle on a flatbed tow truck and have the system checked. Auto Hold The Auto Hold maintains the vehicle in a standstill even though the brake pedal is not depressed after the driver brings the vehicle to a complete stop by depressing the brake pedal. Set up White White Green OFE058025 OFE058024 5-25 5 Driving your vehicle 1. With the driver's door, liftgate and hood closed, depress the brake pedal and then press the [AUTO HOLD] switch. The white AUTO HOLD indicator will come on and the system will be in the standby position. 2. When you stop the vehicle completely by depressing the brake pedal, the AUTO HOLD indicator changes from white to green. 3. The vehicle will remain stationary even if you release the brake pedal. 4. If EPB is applied, Auto Hold will be released. Driving your vehicle Leaving • If you press the accelerator pedal with the gear in D (Drive) or R (Reverse), the Auto Hold will be released automatically and the vehicle will start to move. The AUTO HOLD indicator changes from green to white. • If the vehicle is restarted using the cruise control toggle switch (RES+ or SET-) while Auto Hold and cruise control is operating, the Auto Hold will be released regardless of accelerator pedal operation. The AUTO HOLD indicator changes from green to white. (if equipped with Smart Cruise Control system) WARNING When driving off from Auto Hold by depressing the accelerator pedal, always check the surrounding area near your vehicle. Slowly depress the accelerator pedal for a smooth start. 5-26 Cancel i Information Light off OFE058026 To cancel the Auto Hold operation, press the [AUTO HOLD] switch. The AUTO HOLD indicator will turn off. To cancel the Auto Hold operation when the vehicle is at a standstill, press the [AUTO HOLD] switch while depressing the brake pedal. • The Auto Hold does not operate when: - Driver's door is opened - Liftgate is opened - Hood is opened - The gear is in P (Park) - The EPB is applied • For your safety, the Auto Hold automatically switches to EPB in such cases: - Driver's door is opened - Liftgate is opened - Hood is opened - The vehicle is in a standstill for more than 10 minutes - The vehicle is standing on a steep slope - The vehicle moved several times WARNING Warning messages • Depress the accelerator pedal slowly when you start the vehicle. • For your safety, cancel the Auto Hold when you drive downhill, back up the vehicle or park the vehicle. NOTICE If there is a malfunction with the driver's door, liftgate or hood open detection system, the Auto Hold may not work properly. Contact an authorized HYUNDAI dealer. OIK060069L Parking brake automatically engaged When the EPB is applied from Auto Hold, a warning will sound and a message will appear. 5-27 5 Driving your vehicle In these cases, the parking brake warning light comes on, the AUTO HOLD indicator changes from green to white, and a warning sounds and a message will appear to inform you that EPB has been automatically engaged. Before driving again, depress the brake pedal, check the surrounding area near your vehicle and release the parking brake manually with the EPB switch. • If the AUTO HOLD indicator lights up yellow, the Auto Hold not working properly. Contact an authorized HYUNDAI dealer. • While operating Auto Hold, you may hear mechanical noise. However, it is normal operating noise. Driving your vehicle OIK060067L OIK060071L OFE061037N AUTO HOLD turning Off! Press brake pedal When the conversion from Auto Hold to EPB is not working properly a warning will sound and a message will appear. Depress the brake pedal when the above message appears for the Auto Hold and EPB may not activate. Press brake pedal to deactivate AUTO HOLD If you did not apply the brake pedal when you release the Auto Hold by pressing the [AUTO HOLD] switch, a warning will sound and a message will appear. AUTO HOLD conditions not met. Close door, Hood and liftgate When you press the [AUTO HOLD] switch, if the driver's door, hood and liftgate are not closed, a warning will sound and a message will appear on the LCD display. Press the [AUTO HOLD] switch after closing the driver's door, hood and liftgate. 5-28 Anti-lock Brake System (ABS) WARNING face is pitted or has different surface height. • Tire chains are installed on your vehicle. The safety features of an ABS or ESC equipped vehicle should not be tested by high speed driving or cornering. This could endanger the safety of yourself or others. ABS is an electronic braking system that helps prevent a braking skid. ABS allows the driver to steer and brake at the same time. Using ABS To obtain the maximum benefit from your ABS in an emergency situation, do not attempt to modulate your brake pressure and do not try to pump your brakes. Depress your brake pedal as hard as possible. When you apply your brakes under conditions which may lock the wheels, you may hear sounds from the brakes, or feel a corresponding sensation in the brake pedal. This is normal and it means your ABS is active. ABS does not reduce the time or distance it takes to stop the vehicle. Always maintain a safe distance from the vehicle in front of you. ABS will not prevent a skid that results from sudden changes in direction, such as trying to take a corner too fast or making a sudden lane change. Always drive at a safe speed for the road and weather conditions. 5-29 5 Driving your vehicle An Anti-Lock Braking System (ABS) or an Electronic Stability Control (ESC) system will not prevent accidents due to improper or dangerous driving maneuvers. Even though vehicle control is improved during emergency braking, always maintain a safe distance between you and objects ahead of you. Vehicle speeds should always be reduced during extreme road conditions. The braking distance for cars equipped with ABS or ESC may be longer than for those without these systems in the following road conditions. Drive your vehicle at reduced speeds during the following conditions: • Rough, gravel or snow-covered roads. • On roads where the road sur- Driving your vehicle ABS cannot prevent a loss of stability. Always steer moderately when braking hard. Severe or sharp steering wheel movement can still cause your vehicle to veer into oncoming traffic or off the road. On loose or uneven road surfaces, operation of the anti-lock brake system may result in a longer stopping distance than for vehicles equipped with a conventional brake system. The ABS warning light ( ) will stay on for several seconds after the POWER button is in the ON position. During that time, the ABS will go through self-diagnosis and the light will go off if everything is normal. If the light stays on, you may have a problem with your ABS. Contact an authorized HYUNDAI dealer as soon as possible. 5-30 WARNING If the ABS warning light ( ) is on and stays on, you may have a problem with the ABS. Your power brakes will work normally. To reduce the risk of serious injury or death, contact your HYUNDAI dealer as soon as possible. NOTICE When you drive on a road having poor traction, such as an icy road, and apply your brakes continuously, the ABS will be active continuously and the ABS warning light ( ) may illuminate. Pull your car over to a safe place and turn the vehicle off. Restart the vehicle. If the ABS warning light is off, then your ABS system is normal. Otherwise, you may have a problem with your ABS system. Contact an authorized HYUNDAI dealer as soon as possible. i Information When you jump start your vehicle because of a drained battery, the ABS warning light ( ) may turn on at the same time. This happens because of the low battery voltage. It does not mean your ABS is malfunctioning. Have the battery recharged before driving the vehicle. Electronic Stability Control (ESC) WARNING Never drive too fast for the road conditions or too quickly when cornering. The ESC system will not prevent accidents. Excessive speed in turns, abrupt maneuvers, and hydroplaning on wet surfaces can result in severe accidents. ESC operation ESC ON condition When the POWER button is in the ON position, the ESC and the ESC OFF indicator lights illuminate for approximately three seconds. After both lights go off, the ESC is enabled. 5 OFE058030 Driving your vehicle The Electronic Stability Control (ESC) system helps to stabilize the vehicle during cornering maneuvers. ESC checks where you are steering and where the vehicle is actually going. ESC applies braking pressure to any one of the vehicle's brakes and intervenes in the electric vehicle control system to assist the driver with keeping the vehicle on the intended path. It is not a substitute for safe driving practices. Always adjust your speed and driving to the road conditions. 5-31 Driving your vehicle When operating When the ESC is in operation, the ESC indicator light blinks: • When you apply your brakes under conditions which may lock the wheels, you may hear sounds from the brakes, or feel a corresponding sensation in the brake pedal. This is normal and it means your ESC is active. • When the ESC activates, the vehicle may not respond to the accelerator as it does under routine conditions. • If the Smart Cruise Control was in use when the ESC activates, the Smart Cruise Control automatically disengages. The Smart Cruise Control can be reengaged when the road conditions allow. See "Smart cruise control with stop & go system" later in this chapter. 5-32 ESC OFF condition To cancel ESC operation : • State 2 • State 1 OFE051032N OFE051031N Press the ESC OFF button briefly. The ESC OFF indicator light and message "Traction Control disabled" will illuminate. In this state, the traction control function of ESC is disabled, but the brake control function of ESC still operates. Press and hold the ESC OFF button continuously for more than 3 seconds. The ESC OFF indicator light and message "Traction & Stability Control disabled" illuminates and a warning chime sounds. In this state, both the traction control function of ESC and the brake control function of ESC are disabled. If the POWER button is placed to the OFF position when ESC is off, ESC remains off. Upon restarting the vehicle, the ESC will automatically turn on again. Indicator lights ■ ESC indicator light (blinks) ■ ESC OFF indicator light (comes on) When the ESC is blinking, this indicates the ESC is active: Drive slowly and NEVER attempt to accelerate. NEVER turn the ESC off while the ESC indicator light is blinking or you may lose control of the vehicle resulting in an accident. ESC OFF usage When Driving The ESC OFF mode should only be used briefly to help free the vehicle if stuck in snow or mud, by temporarily stopping operation of the ESC, to maintain wheel torque. To turn ESC off while driving, press the ESC OFF button while driving on a flat road surface. NOTICE 5 Driving with wheels and tires with different sizes may cause the ESC system to malfunction. Before replacing tires, make sure all four tires and wheels are the same size. Never drive the vehicle with different sized wheels and tires installed. Driving your vehicle When the POWER button is pressed to the ON position, the ESC indicator light illuminates, then goes off if the ESC system is operating normally. The ESC indicator light blinks whenever the ESC is operating. If the ESC indicator light stays on, your vehicle may have a malfunction with the ESC system. When this warning light illuminates, have the vehicle checked by an authorized HYUNDAI dealer as soon as possible. The ESC OFF indicator light comes on when the ESC is turned off with the button. WARNING 5-33 Driving your vehicle NOTICE • Do not allow wheel(s) of one axle to spin excessively while the ESC, ABS, and parking brake warning lights are displayed. The repairs would not be covered by the vehicle warranty. Reduce vehicle power and do not spin the wheel(s) excessively while these lights are displayed. • When operating the vehicle on a dynamometer, make sure the ESC is turned off (ESC OFF light illuminated). i Information Turning the ESC off does not affect ABS or standard brake system operation. 5-34 Vehicle Stability Management (VSM) VSM operation VSM ON condition The Vehicle Stability Management (VSM) is a function of the Electronic Stability Control (ESC) system. It helps ensure the vehicle stays stable when accelerating or braking suddenly on wet, slippery and rough roads where traction over the four tires can suddenly become uneven. The VSM operates when: • The Electronic Stability Control (ESC) is on. • Vehicle speed is approximately above 9 mph (15 km/h) on curve roads. • Vehicle speed is approximately above 18 mph (30 km/h) when the vehicle is braking on rough roads. WARNING Take the following precautions when using the Vehicle Stability Management (VSM): • ALWAYS check the speed and the distance to the vehicle ahead.The VSM is not a substitute for safe driving practices. • Never drive too fast for the road conditions. The VSM system will not prevent accidents. Excessive speed in bad weather, slippery and uneven roads can result in severe accidents. When operating When you apply your brakes under conditions which may activate the ESC, you may hear sounds from the brakes, or feel a corresponding sensation in the brake pedal. This is normal and it means your VSM is active. i Information The VSM does not operate when: • Driving on a banked road such as a gradient or incline. • Driving in reverse. • The ESC OFF indicator light is on. • The MDPS (Motor power steering) warning light ( ) is on or blinks. VSM OFF condition To cancel VSM operation, press the ESC OFF button. ESC OFF indicator light ( ) will illuminate. To turn on VSM, press the ESC OFF button again. The ESC OFF indicator light will go out. WARNING NOTICE Driving with wheels and tires with different sizes may cause the VSM system to malfunction. Before replacing tires, make sure all four tires and wheels are the same size. Never drive the vehicle with different sized tires and wheels installed. If the ESC indicator light ( ) or MDPS warning light ( ) stays on or blinks, your vehicle may have a malfunction with the VSM system. When the warning light illuminates, have the vehicle checked by an authorized HYUNDAI dealer as soon as possible. 5 Driving your vehicle 5-35 Driving your vehicle Hill-Start Assist Control (HAC) The Hill-Start Assist Control (HAC) helps prevent the vehicle from rolling backwards when starting a vehicle from a stop on a hill. The system operates the brakes automatically for approximately 5 seconds and releases the brake after 5 seconds or when the accelerator pedal is depressed. WARNING Always be ready to depress the accelerator pedal when starting off on a incline. The HAC activates only for approximately 5 seconds. Good Braking Practices WARNING Whenever leaving the vehicle or parking, always come to a complete stop and continue to depress the brake pedal. Shift to the P (Park) position, then apply the parking brake, and place the POWER button in the OFF position. Vehicles parked with the parking brake not applied or not fully engaged may roll inadvertently and may cause injury to the driver and others. ALWAYS apply the parking brake before exiting the vehicle. i Information • The HAC does not operate when the gear is in P (Park) or N (Neutral). • The HAC activates even when the ESC (Electronic Stability Control) is off. However, it does not activate, when the ESC does not operate normally. 5-36 Wet brakes can be dangerous! The brakes may get wet if the vehicle is driven through standing water or if it is washed. Your vehicle will not stop as quickly if the brakes are wet. Wet brakes may cause the vehicle to pull to one side. To dry the brakes, apply the brakes lightly until the braking action returns to normal. If the braking action does not return to normal, stop as soon as it is safe to do so and call an authorized HYUNDAI dealer for assistance. DO NOT drive with your foot resting on the brake pedal. Even light, but constant pedal pressure can result in the brakes overheating, brake wear, and possibly even brake failure. If a tire goes flat while you are driving, apply the brakes gently and keep the vehicle pointed straight ahead while you slow down. When you are moving slowly enough for it to be safe to do so, pull off the road and stop in a safe location. Keep your foot firmly on the brake pedal when the vehicle is stopped to prevent the vehicle from rolling forward. DRIVE MODE INTEGRATED CONTROL SYSTEM (IF EQUIPPED) The mode changes, as below, whenever the DRIVE MODE button is pressed. NORMAL ECO • Press and hold the DRIVE MODE button to select ECO+ mode. OFE058033 i Information If there is a problem with the instrument cluster, the drive mode will be in NORMAL mode and may not change to ECO mode. The above situations are normal conditions when ECO mode is activated to improve fuel efficiency. ECO mode ECO mode improves battery charge use efficiency for eco-friendly driving. • When ECO mode is selected by pressing the DRIVE MODE button, the ECO indicator (green color) will illuminate. • If the vehicle is set to ECO mode, when the vehicle is turned OFF and restarted the Drive Mode setting will remain in ECO mode. 5 Driving your vehicle The drive mode may be selected according to the driver's preference or road condition. The system resets to be in the NORMAL mode (except if it is in ECO mode), when the vehicle is restarted. When ECO mode is activated: • The acceleration response may be slightly reduced as the accelerator pedal is depressed moderately. • The air conditioner performance may be limited. i Information Battery charge use efficiency depends on the driver's driving habit and road condition. 5-37 Driving your vehicle ECO+ mode ECO+ mode helps improve fuel efficiency with ultra power saving driving mode. When ECO+ mode is selected by pressing and holding the DRIVE MODE button, the ECO+ indicator will illuminate. Distance to empty may not change when the air conditioner/heater system is off. However, actual distance may be extended. Air conditioner/heater system turns off (except the defroster) but you may turn it on if necessary. When the drive mode is switched from the ECO+ mode to a different mode, it is changed to air conditioner/heater operation status of the ECO mode. Whenever the vehicle is restarted, the Drive Mode will reverse back to NORMAL mode. If ECO + mode is activated, the maximum vehicle speed is limited below 60 mph (100 km/h). (&2 • • • • • • 5-38 Drive mode change alert ECO mode climate control The driver can select the Drive mode change alert on the Infotainment system screen. Go to "Vehicle settings → Drive mode → Drive mode change alert". ECO Mode Climate Control helps extend driving range by reducing the heating and cooling power of the climate control. The driver can activate/deactivate the system on the Infotainment system screen. Go to "Vehicle settings → Drive mode → Eco mode climate control". The information, which will be shown whenever the drive mode is changed. [Detailed alert] : A change of the drive mode is shown by an image of the vehicle. [Simple alert] : A change of the drive mode is indicated by a short message on top of the screen. [No alert] : A change of the drive mode is not indicated. FORWARD COLLISION-AVOIDANCE ASSIST (FCA) SYSTEM The Forward Collision-Avoidance Assist (FCA) system is designed to help detect and monitor the vehicle ahead or help detect a pedestrian or cyclists in the roadway through radar signals and camera recognition to warn the driver that a collision is imminent, and if necessary, apply emergency braking. WARNING Take the following precautions when using the Forward CollisionAvoidance Assist (FCA) system: • This system is only a supple- • The driver can activate the FCA by placing the power button to the ON position and by selecting on the Infotainment system screen : "Vehicle settings → Driver assistance → Forward safety" - If you select "Active assistance", the FCA system activates. The FCA produces warning messages and warning alarms in accordance with the collision risk levels. Also, it controls the brakes in accordance with the collision risk levels. - If you select "Warning Only", the FCA system activates and produces only warning alarms in accordance with the collision risk levels. You should control the brake directly because the FCA system do not control the brake. - If you select "Off", the FCA system deactivates, 5-39 5 Driving your vehicle mental system and it is not intended to, nor does it replace the need for extreme care and attention of the driver. The sensing range and objects detectable by the sensors are limited. Pay attention to the road conditions at all times. • NEVER drive too fast in accordance with the road conditions or while cornering. • Always drive cautiously to prevent accidents from any unexpected and sudden situations. The Forward CollisionAvoidance system may not always stop the vehicle completely and is only intended to help mitigate a collision that is imminent. System Setting and Activation System setting Driving your vehicle The warning light illuminates on the LCD display, when you cancel the FCA system. The driver can monitor the FCA ON/OFF status on the Infotainment system screen. Also, the warning light illuminates when the ESC (Electronic Stability Control) is turned off. If the warning light remains ON when the FCA is activated, have the system checked by an authorized HYUNDAI dealer. • The driver can select the initial warning activation time on the Infotainment system screen. Go to the "Vehicle settings →Driver assistance → Warning time → Normal/Later" • 5-40 The options for the initial Forward Collision Warning includes the following: - Normal : When this condition is selected, the initial Forward Collision Warning is activated sensitively. If you feel the warning activates too early, set the Forward Collision Warning to 'Later'. Even though, 'Normal' is selected if the front vehicle suddenly stops the initial warning activation time may not seem fast. - Later : When this condition is selected, the initial Forward Collision Warning is activated later than normal. This setting reduces the amount of distance between the vehicle, pedestrian or cyclists ahead before the initial warning occurs. Select 'Later' when traffic is light and when driving speed is slow. i Information If you change the warning timing, the warning time of other systems may change. Always be aware before changing the warning timing. Prerequisite for activation • Completely stop the vehicle on a safe location before operating the switch on the steering wheel to activate/ deactivate the FCA system. • The FCA automatically activates upon placing the POWER button to the ON position. The driver can deactivate the FCA by canceling the system setting on the Infotainment system screen. • The FCA automatically deactivates upon canceling the ESC (Electronic Stability Control). When the ESC is canceled, the FCA cannot be activated on the Infotainment system screen. The FCA warning light will illuminate which is normal. FCA Warning Message and System Control The FCA produces warning messages and warning alarms in accordance with the collision risk levels, such as abrupt stopping of the vehicle in front, insufficient braking distance, or pedestrian or cyclists detection. Also, it controls the brakes in accordance with the collision risk levels. The driver can select the initial warning activation time in the Vehicle settings in the Infotainment system screen. The options for the initial Forward Collision Warning include Early or Later initial warning time. ❈ The FCA may not operate properly according to the frontal situation, the direction of pedestrian or cyclist and speed. 5-41 5 Driving your vehicle The FCA system is on and ready when FCA is selected on the Infotainment system vehicle settings and when the following prerequisites are satisfied: - The ESC (Electronic Stability Control) is on. - Driving speed exceeds approximately 5 mph (8 km/h) (The FCA is only activated within a certain speed range.). - The system detects a pedestrian, cyclists or a vehicle in front, which may collide with your vehicle. (The FCA may not be activated or may sound a warning alarm in accordance with the driving situation or vehicle condition.) If you select "Warning only", the FCA system activates and produces only warning alarms in accordance with the collision risk levels. WARNING Driving your vehicle Collision Warning (First warning) - If you select "Warning Only", the FCA system activates and produces only warning alarms in accordance with the collision risk levels. You should control the brake directly because the FCA system do not control the brake. Emergency Braking (Second warning) OFE051035N This warning message appears on the LCD display with a warning chime. Additionally, some vehicle system intervention occurs by the driving management system to help decelerate the vehicle. - Your vehicle speed may decelerate moderately. - The FCA system limitedly controls the brakes to preemptively mitigate impact in a collision. 5-42 OFE051036N This warning message appears on the LCD display with a warning chime. Additionally, some vehicle system intervention occurs by the driving management system to help decelerate the vehicle. - The FCA system limitedly controls the brakes to preemptively mitigate impact in a collision. The brake control is maximized just before a collision. - If you select "Warning Only", the FCA system activates and produces only warning alarms in accordance with the collision risk levels. You should control the brake directly because the FCA system do not control the brake. Brake operation • The driver should always use extreme caution while operating the vehicle, whether or not there is a warning message or alarm from the FCA system. • If any other warning sound such as seat belt warning chime is already generated, the Forward CollisionAvoidance Assist (FCA) system warning may not sound. WARNING The FCA system logic operates within certain parameters, such as the distance from the vehicle, pedestrian or cyclists ahead, the speed of the vehicle ahead, and the driver's vehicle speed. Certain conditions such as inclement weather and road conditions may affect the operation of the FCA system. 5 WARNING WARNING The FCA braking control cannot completely stop the vehicle nor avoid all collisions. The driver should hold the responsibility to safely drive and control the vehicle. Never deliberately drive dangerously to activate the system. 5-43 Driving your vehicle • In an urgent situation, the braking system enters into the ready status for prompt reaction against the driver's depressing the brake pedal. • The FCA provides additional braking power for optimum braking performance, when the driver depresses the brake pedal. • The braking control is automatically deactivated, when the driver sharply depresses the accelerator pedal, or when the driver abruptly operates the steering wheel. • The FCA braking control is automatically canceled, when risk factors disappear. CAUTION Driving your vehicle FCA Sensor (Front Radar/ Front View Camera) ■ Front radar Dirt, snow, or foreign substances on the sensor cover or sensor may adversely affect the sensing performance of the sensor. NOTICE OFE058106N ■ Front view camera OFE052038N In order for the FCA system to operate properly, always make sure the sensor cover or sensor is clean and free of dirt, snow, and debris. 5-44 • Do not apply license plate frame or foreign objects such as a bumper sticker or a bumper guard near the sensor. Doing so may adversely affect the sensing performance of the radar. • Always keep the sensor and cover clean and free of dirt and debris. • Use only a soft cloth to wash the vehicle. Do not spray pressurized water directly on the sensor or sensor cover. • Be careful not to apply unnecessary force on the sensor or sensor cover. If the sensor is forcibly moved out of proper alignment, the FCA system may not operate correctly. In this case, a warning message may not be displayed. Have the vehicle inspected by an authorized HYUNDAI dealer. • If the front bumper becomes damaged in the area around the sensor, the FCA system may not operate properly. Have the vehicle inspected by an authorized HYUNDAI dealer. • Use only genuine HYUNDAI parts to repair or replace a damaged sensor or sensor cover. Do not apply paint to the sensor cover. NOTICE i Information Have the system checked by an authorized HYUNDAI dealer when: • The windshield glass is replaced. • The radar sensor or cover gets damaged or replaced. However, the FCA may not properly operate in an area (for example, open terrain), where any substances are not detected or the camera is blocked with dirt, snow or debris after turning on the vehicle. Also, even though a warning message does not appear on the LCD display, the FCA may not properly operate. WARNING OTM070095N Forward Safety system disabled. Radar blocked When the sensor cover is blocked with dirt, snow, or debris, the FCA system operation may stop temporarily. If this occurs, a warning message will appear on the LCD display. Remove any dirt, snow, or debris and clean the radar sensor cover before operating the FCA system. The FCA system may not activate according to the road conditions, inclement weather, driving conditions or traffic conditions. 5-45 5 Driving your vehicle • NEVER install any accessories or stickers on the front windshield, nor tint the front windshield. • NEVER locate any reflective objects (for example, white paper, mirror) over the dashboard. Any light reflection may cause a malfunction of the system. • Pay extreme caution to keep the camera out of water. • NEVER disassemble the camera assembly, nor apply any impact on the camera assembly. • Playing the vehicle audio system at high volume may offset the system warning sounds. Warning message and warning light Driving your vehicle System Malfunction WARNING • Even if there is a problem with • The FCA is only a supplemen- OTM070094N Check Forward Safety system • When the FCA is not working properly, the FCA warning light ( ) will illuminate and the warning message will appear for a few seconds. After the message disappears, the master warning light ( ) will illuminate. In this case, have the vehicle inspected by an authorized HYUNDAI dealer. • The FCA warning message may appear along with the illumination of the ESC (Electronic Stability Control) warning light. 5-46 tal system for the driver’s convenience. The driver has the responsibility to control vehicle operation. Do not solely depend on the FCA system. Rather, maintain a safe braking distance, and, if necessary, depress the brake pedal to reduce the driving speed. • In certain instances and under certain driving conditions, the FCA system may activate unintentionally. This initial warning message appears on the LCD display with a warning chime. Also, in certain instances the front radar sensor or camera recognition system may not detect the vehicle, pedestrian or cyclists ahead. The FCA system may not activate and the warning message will not be displayed. • • • • the brake control function of the FCA system, the vehicle's basic braking performance will operate normally. However, brake control function for avoiding collision will not activate. If the vehicle in front of you stops suddenly, you may have less control of the brake system. Therefore, always keep a safe distance between your vehicle and the vehicle in front of you. The FCA system may activate during braking and the vehicle may stop suddenly shifting loose objects toward the passengers. Always keep loose objects secured. The FCA system may not activate if the driver applies the brake pedal to avoid a collision. The brake control may not work, possibly causing a collision, if a vehicle in front abruptly stops. Always pay extreme caution. • The FCA system does not the vehicle abruptly stops by the activated FCA system. Exercise extreme caution. • The FCA system operates only to help detect vehicles, pedestrian or cyclist in front of the vehicle. detect cross traffic vehicles that are approaching. • The FCA system cannot detect the driver approaching the side view of a parked vehicle (for example on a dead end street). • The FCA system cannot detect the cross traffic cyclist that are approaching. In these cases, you must maintain a safe braking distance, and if necessary, depress the brake pedal to reduce the driving speed in order to maintain a safe distance. WARNING • The FCA system operates only to help detect vehicles or pedestrians in front of the vehicle. • The FCA system does not operate when the vehicle is in reverse. • The FCA system is not designed to detect other objects on the road such as animals. • The FCA system does not detect vehicles in the opposite lane. Limitations of the System The Forward Collision Avoidance Assist (FCA) system is designed to monitor the vehicle ahead or a pedestrian or cyclists on the roadway through radar signals and camera recognition to warn the driver that a collision is imminent, and if necessary, apply emergency braking. In certain situations, the radar sensor or the camera may not be able to detect the vehicle, a pedestrian or cyclists ahead. In these cases, the FCA system may not operate normally. The driver must pay careful attention in the following situations where the FCA operation may be limited. Detecting vehicles The sensor may be limited when: • The radar sensor or camera is blocked with a foreign object or debris • Inclement weather such as heavy rain or snow obscures the field of view of the radar sensor or camera • There is interference by electromagnetic waves 5-47 5 Driving your vehicle • Occupants may get injured, if Driving your vehicle • The vehicle is on unpaved or uneven rough surfaces, or road with sudden gradient changes. • The vehicle drives through a construction area, on an unpaved road, or above metal materials, such as a railway • The vehicle in front is too small to be detected (for example a motorcycle or a bicycle, etc.) • The camera’s field of view is not well illuminated (either too dark or too much reflection or too much backlight that obscures the field of view) • The camera does not recognize the entire vehicle in front. • The vehicle in front is an oversize vehicle or trailer that is too big to be detected by the camera recognition system (for example a tractor trailer, etc.) • The vehicle in front does not have rear lights or the rear lights are not turned ON or the rear lights are located unusually. • The outside brightness changes suddenly, for example when entering or exiting a tunnel 5-48 • The vehicle drives inside a building, such as a basement parking lot • The adverse road conditions cause excessive vehicle vibrations while driving • You are on a roundabout and the vehicle in front circles • The camera lens is contaminated due to tinted, filmed or coated windshield, damaged glass, or stuck of foreign matter (sticker, bug, etc.) on the glass • The camera is damaged. • The brightness outside is too low such as when the headlights are not on at night or the vehicle is going through a tunnel. • Light coming from a street light or an oncoming vehicle is reflected on a wet road surface such as a puddle in the road • The field of view in front is obstructed by sun glare • The shadow is on the road by a median strip, trees, etc. • The vehicle drives through a tollgate. • The windshield glass is fogged up; a clear view of the road is obstructed • The radar/camera sensor recognition is limited • The rear part of the vehicle in front is not normally visible (for example, the vehicle is spinning or the vehicle is overturned) • There is severe irregular reflection from the radar sensor • The sensor recognition changes suddenly when passing over a speed bump • The vehicle in front is driving erratically • The vehicle in front is moving vertically to the driving direction • The vehicle in front is stopped vertically • The vehicle in front is driving towards your vehicle or reversing • You are on a roundabout and the vehicle in front circles. OTM058073 OFE058041 Forward Collision-Avoidance Assist system may recognize in the next lane or outside the lane when driving on a curved road. If this occurs, the system may unnecessarily alarm the driver and apply the brake. Always pay attention to road and driving conditions, while driving. - Driving on a slope The performance of Forward Collision-Avoidance Assist system may be decreased while driving upward or downward on a slope. The front camera or front radar sensor recognition may not detect the vehicle, pedestrian or cyclist in front. This may result in unnecessary alarm and braking or no alarm and braking when necessary. When the system suddenly recognizes the vehicle, pedestrian or cyclist in front while passing over a slope, you may experience sharp deceleration. 5-49 5 Driving your vehicle OTM058117 - Driving on a curve The performance of Forward Collision-Avoidance Assist system may be limited when driving on a curved road. The front camera or radar sensor recognition system may not detect the vehicle, pedestrian or cyclist traveling in front on a curved road. This may result in no alarm and braking when necessary. Always pay attention to road and driving conditions, and if necessary, depress the brake pedal to reduce your driving speed in order to maintain a safe distance. Driving your vehicle Always keep your eyes forward while driving upward or downward on a slope and if necessary depress the brake pedal to reduce your driving speed in order to maintain distance. 5-50 OTM058074 OTM058119 - Changing lanes When a vehicle changes lanes in front of you, the FCA system may not immediately detect the vehicle, especially if the vehicle changes lanes abruptly. In this case, you must maintain a safe braking distance, and if necessary, depress the brake pedal to reduce your driving speed in order to maintain a safe distance. When driving in stop-and-go traffic, and a stopped vehicle in front of you merges out of the lane, the FCA system may not immediately detect the new vehicle that is now in front of you. In this case, you must maintain a safe braking distance, and if necessary, depress the brake pedal to reduce your driving speed in order to maintain a safe distance. Detecting pedestrians or cyclists OFE058042 5-51 5 Driving your vehicle - Detecting the vehicle in front of you If the vehicle in front of you has cargo that extends rearward from the cab, or when the vehicle in front of you has higher ground clearance, additional special attention is required. The FCA system may not be able to detect the cargo extending from the vehicle. In these instances, you must maintain a safe braking distance from the rearmost object, and if necessary, depress the brake pedal to reduce your driving speed in order to maintain distance. The sensor may be limited when: • The pedestrian or cyclist is not fully detected by the camera recognition system, for example, if the pedestrian is leaning over or is not fully walking upright • The pedestrian or cyclist is moving very quickly or appears abruptly in the camera detection area • The pedestrian or cyclist is wearing clothing that easily blends into the background, making it difficult to be detected by the camera recognition system • The outside lighting is too bright (for example, when driving in bright sunlight or in sun glare) or too dark (for example, when driving on a dark rural road at night) • It is difficult to detect and distinguish the pedestrian or cyclist from other objects in the surroundings, for example, when there is a group of pedestrians, cyclist or a large crowd • There is an item similar to a person's body structure • The pedestrian or cyclist is small • The pedestrian has impaired mobility • The sensor recognition is limited • The radar sensor or camera is blocked with a foreign object or debris • Inclement weather such as heavy rain or snow obscures the field of view of the radar sensor or camera • When light coming from a street light or an oncoming vehicle is reflected on a wet road surface such as a puddle in the road • The field of view in front is obstructed by sun glare • The windshield glass is fogged up; a clear view of the road is obstructed • The adverse road conditions cause excessive vehicle vibrations while driving • When the pedestrian or cyclist suddenly interrupts in front of the vehicle Driving your vehicle • When the cyclist in front is riding intersected with the driving direction • When there is any other electromagnetic interference • When the construction area, rail or other metal object is near the cyclist • If the bicycle material is not reflected well on the radar i Information In some instances, the FCA system may be canceled when subjected to electromagnetic interference. i Information This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. WARNING • Do not use the Forward Collision Avoidance Assist (FCA) system when towing a vehicle. Application of the FCA system while towing may adversely affect the safety of your vehicle or the towing vehicle. • Use extreme caution when the vehicle in front of you has cargo that extends rearward from the cab, or when the vehicle in front of you has higher ground clearance. 5-52 • Forward Collision-Avoidance Assist system may operate when an object, which has similar shape or characteristic to a vehicle, pedestrian or cyclist, is detected. • The FCA system is designed to detect and monitor the vehicle ahead or detect a pedestrian or cyclist in the roadway through radar signals and camera recognition. It is not designed to detect, motorcycles, or smaller wheeled objects such as luggage bags, shopping carts, or strollers. • Never try to test the operation of the FCA system. Doing so may cause severe injury or death. • If the front bumper, front glass, radar or camera have been replaced or repaired, have your vehicle inspected by an authorized HYUNDAI dealer. BLIND-SPOT COLLISION WARNING/BLIND-SPOT COLLISION-AVOIDANCE ASSIST System Description Blind-Spot Collision Warning (BCW) Blind-Spot Collision-Avoidance Assist (BCA) 2) Closing at high speed The Blind-Spot Collision Warning (BCA) system uses radar sensors in the rear bumper to monitor and warn the driver of an approaching vehicle in the driver's blind spot area. 1) Blind-Spot Area OTM058121L OTM058120L The blind spot detection range varies relative to vehicle speed. Note that if your vehicle is traveling much faster than the vehicles around you, the warning will not occur. OTM058108 The Blind-Spot Collision-Avoidance Assist (BCA) system detects the front lane through the camera installed on the upper front windshield and detects the side/rear areas through radar sensors. The Blind-Spot Collision-Avoidance Assist system may activate the Electronic Stability Control (ESC) in accordance with a colliding possibility with an approaching vehicle while changing lanes. It is to lower the colliding risk or mitigate the colliding damage. 5-53 5 Driving your vehicle The Lane Change Assist feature will alert you when a vehicle is approaching in an adjacent lane at a high rate of speed. If the driver activates the turn signal when the system detects an oncoming vehicle, the system sounds an audible alert. Driving your vehicle WARNING • Always be aware of road conditions while driving and be alert for unexpected situations even though the BlindSpot Collision Warning system and Blind-Spot CollisionAvoidance Assist system are operating. • The Blind-Spot Collision Warning (BCW) system and Blind-Spot CollisionAvoidance Assist (BCA) system are supplemental systems to assist you. Do not entirely rely on the systems. Always pay attention, while driving, for your safety. • The Blind-Spot Collision Warning (BCW) system and Blind-Spot CollisionAvoidance Assist (BCA) system are not substitutes for proper and safe driving. Always drive safely and use caution when changing lanes or backing up the vehicle. 5-54 The Blind-Spot Collision Warning (BCW) system and Blind-Spot CollisionAvoidance Assist (BCA) system may not detect every object alongside the vehicle. System Setting and Activation System setting • The driver can activate the system by placing the power button to the ON position and by selecting "Vehicle settings → Driver assistance → Blind-spot safety" on Infotainment system screen. - The BCA and BCW turn on and get ready to be activated when 'Active assistance' is selected. Then, if a vehicle approaches the driver's blind spot area a warning sounds or braking power is applied. - The BCW turns on and gets ready to be activated when 'Warning Only' is selected. Then, if a vehicle approaches the driver's blind spot area a warning sounds. - The system is deactivated and the indicator on the BCW/BCA button is extinguished when 'Off' is selected. • If the vehicle is turned off then on again, the system maintains the previous state. • The driver can select the initial warning activation time in the User Settings in the "Vehicle settings → Driver assistance → Warning time" on Infotainment system screen. OFE058188N i Information If you change the warning timing, the warning time of other systems may change. Always be aware before changing the warning timing. 5-55 5 Driving your vehicle • If you press the BCW/BCA switch while 'Active assistance' or 'Warning Only' is selected the indicator on the button will turn off and the system will deactivate. • If you press the BCW/BCA switch while the system is canceled the indicator on the button illuminates and the system activates. In this case, the system returns to the state before the vehicle was turned off. When the system is initially turned on and when the vehicle is turned off then on again while the system is in activation, the warning light will illuminate for 3 seconds on the outer side view mirror. • The options for the initial BlindSpot Collision Warning includes the following: - Normal: When this condition is selected, the initial Blind-Spot Collision Warning is activated normally. If this setting feels sensitive, change the option to 'Later'. The warning activation time may feel late if a vehicle at the side or rear abruptly accelerates. - Later: Select this warning activation time when the traffic is light and you are driving in a low speed. Driving your vehicle • The driver can select the warning volume of Blind-Spot Collision Warning in the Vehicle Settings in the Infotainment system screen by selecting 'Vehicle Settings → Driver Assistance → Warning Volume → High/Medium/Low'. For more information refer to the separately supplied Navigation manual. i Information If you change the warning volume, the warning volume of other systems may change. Always be aware before changing the warning volume. 5-56 Operating Conditions The system enters the ready status, when 'Active assistance' or 'Warning Only' is selected and the following conditions are satisfied: • Active assistance 1) The Blind-Spot CollisionAvoidance Assist system will activate when : - Vehicle speed is between 40 mph and 110 mph (60 km/h and 180 km/h). - The system detects both of the lane lines. - An approaching vehicle is detected next to or behind your vehicle. 2) The Blind-Spot Collision Warning system will activate when The vehicle speed is above approximately 20 mph (30 km/h). • Warning Only 1) The Blind-Spot Collision Warning system will activate when : - The vehicle speed is approximately 20 mph (30 km/h). ❈The Blind-Spot Collision-Avoidance Assist system is not activated. Warning and System Control Blind-Spot Collision Warning (BCW) system ■ Left side ■ Right side ■ Left side ■ Right side OFE058045 OFE058046 [A] : Warning sound First stage alert If a vehicle is detected within the boundary of the system, a warning light will illuminate on the outer side view mirror. Once the detected vehicle is no longer within the blind spot area, the warning will turn off according to the driving conditions of the vehicle. Second stage alert A warning chime to alert the driver will activate when: 1. A vehicle has been detected in the blind spot area by the radar system AND. 2. The turn signal is applied (same side as where the vehicle is being detected). When this alert is activated, the warning light on the outer side view mirror will also blink. And a warning chime will sound. If you turn off the turn signal indicator, the second stage alert will be deactivated. Once the detected vehicle is no longer within the blind spot area, the warning will turn off according to the driving conditions of the vehicle. 5-57 5 Driving your vehicle OFE058044 Driving your vehicle WARNING CAUTION • The warning light on the outer • The driver should always use side view mirror will illuminate whenever a vehicle is detected at the rear side by the system. To avoid accidents, do not focus only on the warning light and neglect to see the surrounding of the vehicle. • Drive safely even though the vehicle is equipped with a Blind-Spot Collision Warning (BCA) system. Do not solely rely on the system but check your surrounding before changing lanes or backing the vehicle up. • The system may not alert the driver in some conditions so always check your surroundings while driving. extreme caution while operating the vehicle, whether or not the warning light on the outer side view mirror illuminates or there is a warning alarm. • Playing the vehicle audio system at high volume may offset the Blind-Spot Collision Warning system warning sounds. • If any other warning sound such as seat belt warning chime is already generated, the Blind-Spot Collision Warning (BCW) system warning may not sound. 5-58 Blind-Spot Collision-Avoidance Assist (BCA) system OFE041489N/OFE041490N The Blind-Spot Collision-Avoidance Assist (BCA) system may apply braking power, when an approaching vehicle is detected within a certain distance next to or behind your vehicle. It gently applies braking power on the tire, which is located in the opposite side of the possibly-colliding point. The instrument cluster will inform the driver of the system activation. WARNING • The driver is responsible for accurate steering. Detecting Sensor (Front View Camera and Rear Corner Radar) ■ Front view camera • Do not unnecessarily operate the steering wheel, when the Blind-Spot Collision-Avoidance Assist System is in operation. • Always exercise extreme caution while driving. The BlindSpot Collision-Avoidance Assist system may not operate or unnecessarily operate in accordance with your driving situations. • The Blind-Spot CollisionAvoidance Assist system is not a substitute for safe driving practices, but a convenience function only. It is the responsibility of the driver to always drive cautiously to prevent unexpected and sudden situations from occurring. Pay attention to the road conditions at all times. 5 OFE052038N Driving your vehicle Blind-Spot Collision-Avoidance Assist (BCA) system is automatically deactivated when: - The vehicle drives a certain distance away - The vehicle direction is changed against the possible-colliding point - The steering wheel is abruptly moved - The brake pedal is depressed - After a certain period of time The driver should drive the vehicle in the middle of the vehicle lanes to keep the system in the ready status. When the vehicle drives too close to one side of the vehicle lanes, the system may not properly operate. In addition, the system may not properly control your vehicle in accordance with driving situations. Thus, always pay close attention to road situations. ■ Rear corner radar OFE052049L 5-59 Driving your vehicle Front view camera The front camera is a sensor detecting the lane. If the sensor is covered with snow, rain or foreign substance, the system may temporarily be canceled. The system is canceled due to the degradation of the sensor's detection performance. Always keep the sensor clean. * Refer to Lane Keeping Assist (LKA) System for cautions for the front camera sensor. CAUTION • Be careful not to apply unnec- • The system may not work • Rear corner radar • The rear radars are the sensors inside the rear bumper for detecting the side and rear areas. Always keep the rear bumper clean for proper operation of the system. • • properly when the bumper has been damaged, or if the rear bumper has been replaced or repaired. The sensing range differs somewhat according to the width of the road. When the road is narrow, the system may detect other vehicles in the next lane. The system may turn off due to strong electromagnetic waves. Always keep the sensors clean. NEVER arbitrarily disassemble the sensor component nor apply any impact on the sensor component. • • • • 5-60 essary force on the radar sensor or sensor cover. If the sensor is forcibly moved out of proper alignment, the system may not operate correctly. In this case, a warning message may not be displayed. Have the vehicle inspected by an authorized HYUNDAI dealer. Do not apply foreign objects such as a bumper sticker or a bumper guard near the radar sensor or apply paint to the sensor area. Doing so may adversely affect the performance of the sensor. NEVER install any accessories or stickers on the front windshield, nor tint the front windshield. Pay extreme caution to keep the camera sensor out of water. NEVER locate any reflective objects (for example, white paper, mirror) over the crash pad. Any light reflection may cause a malfunction of the system. Warning message If any of these conditions occur, the light on the BCW/BCA switch and the system will turn off automatically. When the BCW canceled warning message is displayed in the cluster, check to make sure that the rear bumper is free from any dirt or snow in the areas where the sensor is located. Remove any dirt, snow, or foreign material that could interfere with the radar sensors. OTM070098N After any dirt or debris is removed, the system should operate normally after about 10 minutes of driving the vehicle. If the system still does not operate normally have your vehicle inspected by an authorized HYUNDAI dealer. Turn off the BCW, BCA and RCCW system when a trailer or carrier is installed. - Press the BCW/BCA switch (the indicator on the switch will turn off) - Deactivate the RCCW system by deselecting "Vehicle settings → Driver assistance → Blind-spot safety → Rear cross-traffic safety" on Infotainment system screen. If you use BCW, BCA and RCCW system, remove a trailer or carrier. 5 Driving your vehicle Blind-Spot Safety system disabled. Radar blocked This warning message may appear when : - One or both of the sensors on the rear bumper is blocked by dirt or snow or a foreign object. - Driving in rural areas where the sensor does not detect another vehicle for an extended period of time. - When there is inclement weather such as heavy snow or rain. i Information 5-61 Driving your vehicle Limitations of the System OTM070099N OTM070099N Check Blind-Spot Safety system If there is a problem with the BCW system, a warning message will appear and the light on the switch will turn off. The system will turn off automatically. BCA will not operate also if the BCW system turns off due to malfunction. Have your vehicle inspected by an authorized HYUNDAI dealer. Check Blind-Spot Safety system If there is a problem with the BCA system, a warning message will appear. The system will turn off automatically. BCW will still operate even if the BCA system turns off due to malfunction. Have your vehicle inspected by an authorized HYUNDAI dealer. 5-62 The driver must be cautious in the below situations, because the system may not detect other vehicles or objects in certain circumstances. • When a trailer or carrier is installed. • The vehicle driven in inclement weather such as heavy rain or snow. • The sensor is polluted with rain, snow, mud, etc. • The rear bumper where the sensor is located is covered with a foreign object such as a bumper sticker, a bumper guard, a bike rack, etc. • The rear bumper is damaged, or the sensor is out of the original default position. • The vehicle height gets lower or higher due to heavy loading in a trunk, abnormal tire pressure, etc. • When the temperature of the rear bumper is high. • When the sensors are blocked by other vehicles, walls or parking-lot pillars. • When the other vehicle passes at a very fast speed. • While changing lanes. • If the vehicle has started at the same time as the vehicle next to you and has accelerated. • When the vehicle in the next lane moves two lanes away from you OR when the vehicle two lanes away moves to the next lane from you. • A motorcycle or bicycle is near. • A flat trailer is near. • If there are small objects in the detecting area such as a shopping cart or a baby stroller. • If there is a low height vehicle such as a sports car. • The brake pedal is depressed. • ESC (Electronic Stability Control) is activated. • ESC (Electronic Stability Control) malfunctions. • The tire pressure is low or a tire is damaged. • The vehicle abruptly changes driving direction. • The vehicle makes sharp lane changes. • The vehicle sharply stops. • Temperature is extremely low around the vehicle. • The vehicle severely vibrates while driving over a bumpy road, uneven/bumpy road, or concrete patch. • The vehicle drives on a slippery surface due to snow, water puddle, or ice. • The Lane Keeping Assist (LKA) or Lane Departure Warning (LDW) do not operate normally. (if equipped) For more information refer to "Lane Keeping Assist (LKA) system" in this chapter. 5-63 5 Driving your vehicle • The vehicle driven on a curved road. • The vehicle driven through a tollgate. • The road pavement (or the peripheral ground) abnormally contains metallic components (for example, possibly due to subway construction). • There is a fixed object near the vehicle, such as a guardrail. • While going down or up a steep road where the height of the lane is different. • Driving on a narrow road where trees or grass or overgrown. • Driving in rural areas where the sensor does not detect another vehicle or structure for an extended period of time. • Driving on a wet road. • Driving on a road where the guardrail or wall is in double structure. • A big vehicle is near such as a bus or truck. • When the other vehicle approaches very close. Driving your vehicle OTM058109 OTM058110 OTM058111 • Driving on a curve The BCW and BCA systems may not operate properly when driving on a curved road. In certain instances, the system may not detect the vehicle in the next lane. Always pay attention to road and driving conditions, while driving. The BCW and BCA systems may not operate properly when driving on a curved road. In certain instances, the system may recognize a vehicle in the same lane. Always pay attention to road and driving conditions, while driving. • Driving where the road is merging/dividing The BCW and BCA systems may not operate properly when driving where the road is merging/dividing. In certain instances, the system may not detect the vehicle in the next lane. Always pay attention to road and driving conditions, while driving. 5-64 OFE058109N • Driving where the heights of the lanes are different The BCW and BCA systems may not operate properly when driving where the heights of the lanes are different. In certain instances, the system may not detect the vehicle on a road with different lane heights (for example, underpass joining section, grade separated intersections, etc.). Always pay attention to road and driving conditions, while driving. OFE058110N [A] : noise barrier, [B] : guardrail • Driving where there is a structure beside the road The BCW and BCA systems may not operate properly when driving where there is structure beside the road. In certain instances, the system may recognize structures (for example, noise barriers, guardrail, double guardrail, median strip, bollard, street light, road sign, tunnel wall, etc.) beside the road. Always pay attention to road and driving conditions, while driving. 5-65 5 Driving your vehicle OFE058125 • Driving on a slope The BCW and BCA systems may not operate properly when driving on a slope. In certain instances the system may not detect the vehicle in the next lane. Also, in certain instances, the system may recognize the ground or structures. Always pay attention to road and driving conditions, while driving. Driving your vehicle i Information This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. 5-66 REAR CROSS-TRAFFIC COLLISION WARNING (RCCW) / REAR CROSS-TRAFFIC COLLISIONAVOIDANCE ASSIST (RCCA) System Description Rear Cross-Traffic Collision Warning (RCCW) system The Rear Cross-Traffic Collision Warning (RCCW) system uses radar sensors to monitor the approaching cross traffic from the left and right side of the vehicle when your vehicle is in reverse. The blind spot detection range varies relative to the approaching vehicle speed. The Rear Cross-Traffic CollisionAvoidance Assist (RCCA) system monitors approaching cross traffic from the left and right side of the vehicle when your vehicle is approaching. The Rear Cross-Traffic CollisionAvoidance Assist (RCCA) system may activate the Electronic Stability Control (ESC) in accordance with a colliding possibility with an approaching vehicle. It is to lower the colliding risk or mitigate the colliding damage. WARNING • Always be aware of road conditions while driving and be alert for unexpected situations even though the Rear Cross-Traffic Collision Warning system and Rear Cross-Traffic Collision-Avoidance Assist system are operating. • The Rear Cross-Traffic Collision Warning system and Rear Cross-Traffic CollisionAvoidance Assist system are supplemental systems to assist you. Do not entirely rely on the systems. Always pay attention, while driving, for your safety. • The Rear Cross-Traffic Collision Warning system and Rear Cross-Traffic CollisionAvoidance Assist system are not substitutes for proper and safe driving. Always drive safely and use caution when backing up the vehicle. 5-67 5 Driving your vehicle OTM058092 Rear Cross-Traffic CollisionAvoidance Assist (RCCA) system Driving your vehicle System Setting and Activation System setting • The driver can activate the systems by placing the power button to the ON position and by selecting "Vehicle settings → Driver assistance → Blind-spot safety → Rear Cross-Traffic Safety" on Infotainment system screen. The RCCA and RCCW turn on and get ready to be activated when 'Rear Cross-Traffic Safety' is selected. • When the vehicle is turned off then on again, the systems are always ready to be activated. • When the system is initially turned on and when the vehicle is turned off then on again, the warning light will illuminate for 3 seconds on the outer side view mirror. The driver can select the initial warning activation time in the User Settings in the Infotainment system screen by selecting 'Vehicle settings → Driver Assistance → Warning Timing'. The options for the initial Rear Cross-Traffic Collision Warning includes the following: - Normal: When this condition is selected, the initial Rear Cross-Traffic Collision Warning is activated normally. If this setting feels sensitive, change the option to 'Later'. The warning activation time may feel late if the a vehicle at the side or rear abruptly accelerates. - Later: Select this warning activation time when the traffic is light and you are driving in a low speed. i Information If you change the warning timing, the warning time of other systems may change. Always be aware before changing the warning timing. 5-68 The driver can select the warning volume of the Rear Cross-Traffic Collision Warning in the Vehicle Settings in the Infotainment system screen by selecting 'Vehicle settings → Driver Assistance → Warning Volume → High/Medium/ Low'. For more information refer to the separately supplied Navigation manual. i Information If you change the warning volume, the warning volume of other systems may change. Always be aware before changing the warning volume. Operating conditions The system's detecting range is approximately 1 – 65 ft. (0.5 – 20 m). An approaching vehicle will be detected if the vehicle speed is within 5 – 22.5 mph (8 – 36 km/h). Note that the detecting range may vary under certain conditions. As always, use caution and pay close attention to your surroundings when backing up your vehicle. ■ Left OFE058120 ■ Right If the vehicle detected by the sensors approaches from the rear left/right side of your vehicle, the warning chime will sound, the warning light on the outer side view mirror will blink and a message will appear on the LCD display. If the rear view monitor system is in activation, a message will also appear on the Infotainment system screen. The warning will stop when: - The detected vehicle moves out of the sensing area or - when the vehicle is right behind your vehicle or - when the vehicle is not approaching your vehicle or - when the other vehicle slows down. OFE058121 5-69 5 Driving your vehicle To operate: Go to the 'Vehicle settings → Driver Assistance → Blind-Spot Safety → Rear Cross-Traffic Safety' on the Infotainment system screen. The system will turn on and standby to activate. The system will activate when vehicle speed is below 10 mph (16 km/h) and with the gear in R (Reverse). * The system will not activate when the vehicle speed exceeds 10 mph (16 km/h). The system will activate again when the speed is below 10 mph (16 km/h). Warning and System Control Rear Cross-Traffic Collision Warning (RCCW) system Driving your vehicle Rear Cross-Traffic CollisionAvoidance Assist (RCCA) system ■ Left OFE051053N ■ Right OFE051054N 5-70 If the risk of collision is detected while the RCCW is generated, brake is controlled. The instrument cluster will inform the driver of the brake control. If the rear view monitor system is in activation, a message will also appear on the Infotainment system screen. After the brake control, the driver must immediately depress the brake pedal and check the surroundings. - The brake activation by the system lasts for about 2 seconds. The driver must pay attention as the brake is disengaged after 2 seconds. - The brake control by the system is canceled if the driver depresses the brake pedal with sufficient power. - Brake control is activated once for each right/left approach after shifting the gear to R (Reverse). The brake control may not operate properly according to the status of the ESC (Electronic Stability Control). The same warning message is displayed on the instrument cluster for this case also. - When the ESC (Electronic Stability Control) warning light is on. - When the ESC (Electronic Stability Control) is engaged in a different function. CAUTION • When the operation condition of the Rear Cross-Traffic Collision Warning system is satisfied, the warning will occur every time a vehicle approaches the side or rear of your stopped (0 mph vehicle speed) vehicle. • The system's warning or brake may not operate properly if the left or right of your vehicle's rear bumper is blocked by a vehicle or obstacle. • The driver should always use extreme caution while operating the vehicle, whether or not the warning light on the outer side view mirror illuminates or there is a warning alarm. • Playing the vehicle audio system at high volume may offset the system's warning sounds. • If any other warning sound such as seat belt warning chime is already generated, the Rear Cross-Traffic Collision Warning system warning may not sound. • Drive safely even though the vehicle is equipped with a Rear Cross-Traffic Collision Warning system and Rear Cross-Traffic Collision-Avoidance Assist system. Do not solely rely on the system but check your surrounding when backing the vehicle up. Detecting Sensor OFE052049L The rear corner radars are the sensors inside the rear bumper for detecting the side and rear areas. Always keep the rear bumper clean for proper operation of the system. 5-71 5 Driving your vehicle WARNING • The driver is responsible for accurate brake control. • Always pay extreme caution while driving. The Rear CrossTraffic Collision Warning system and Rear Cross-Traffic Collision-Avoidance Assist system may not operate properly or unnecessarily operate in accordance with your driving situations. • The Rear Cross-Traffic Collision-Avoidance Assist system is not a substitute for safe driving practices, but a convenience function only. It is the responsibility of the driver to always drive cautiously to prevent unexpected and sudden situations from occurring. Pay attention to the road conditions at all times. Driving your vehicle CAUTION • The system may not work • • • • properly when the bumper has been damaged, or if the rear bumper has been replaced or repaired. The system may turn off due to strong electromagnetic waves. Always keep the sensors clean. NEVER arbitrarily disassemble the sensor component nor apply any impact on the sensor component. Be careful not to apply unnecessary force on the radar sensor or sensor cover. If the sensor is forcibly moved out of proper alignment, the system may not operate correctly. In this case, a warning message may not be displayed. Have the vehicle inspected by an authorized HYUNDAI dealer. 5-72 • Do not apply foreign objects Warning message such as a bumper sticker or a bumper guard near the radar sensor or apply paint to the sensor area. Doing so may adversely affect the performance of the sensor. OTM070098N Blind-Spot Safety system disabled. Radar blocked This warning message may appear when: - One or both of the sensors on the rear bumper is blocked by dirt or snow or a foreign object. - Driving in rural areas where the sensor does not detect another vehicle for an extended period of time. - When there is inclement weather such as heavy snow or rain. i Information Turn off the BCW and RCCW system when a trailer or carrier is installed. - Press the BCW/BCA switch (the indicator on the switch will turn off) - Deactivate the RCCW system by deselecting "Vehicle settings → Driver assistance → Blind-spot safety → Rear cross-traffic safety" on Infotainment system screen. Limitations of the System OTM070099N Check Blind-Spot Safety system If there is a problem with the BCW system, a warning message will appear and the light on the switch will turn off. The system will turn off automatically. RCCW and RCCA will not operate also if the BCW system turns off due to malfunction. Have your vehicle inspected by an authorized HYUNDAI dealer. The driver must be cautious in the below situations, because the system may not detect other vehicles or objects in certain circumstances. • When a trailer or carrier is installed. • The vehicle drives in inclement weather such as heavy rain or snow. • The sensor is polluted with rain, snow, mud, etc. • The rear bumper where the sensor is located is covered with a foreign object such as a bumper sticker, a bumper guard, a bike rack, etc. • The rear bumper is damaged, or the sensor is out of the original default position. • The vehicle height gets lower or higher due to heavy loading in a trunk, abnormal tire pressure, etc. • When the temperature of the rear bumper is high. • When the sensors are blocked by other vehicles, walls or parking-lot pillars. • The vehicle drives on a curved road. 5-73 5 Driving your vehicle If any of these conditions occur, the light on the BCW/BCA switch and the system will turn off automatically. When the BCW canceled warning message is displayed in the cluster, check to make sure that the rear bumper is free from any dirt or snow in the areas where the sensor is located. Remove any dirt, snow, or foreign material that could interfere with the radar sensors. After any dirt or debris is removed, the system should operate normally after about 10 minutes of driving the vehicle. If the system still does not operate normally have your vehicle inspected by an authorized HYUNDAI dealer. Driving your vehicle • The road pavement (or the peripheral ground) abnormally contains metallic components (for example, possibly due to subway construction). • There is a fixed object near the vehicle, such as a guardrail. • While going down or up a steep road where the height of the lane is different. • Driving on a narrow road where trees or grass or overgrown. • Driving in rural areas where the sensor does not detect another vehicle for an extended period of time. • Driving on a wet road. • Driving on a road where the guardrail or wall is in double structure. • A big vehicle is near such as a bus or truck. • When the other vehicle approaches very close. • When the other vehicle passes at a very fast speed. • While changing lanes. • If the vehicle has started at the same time as the vehicle next to you and has accelerated. 5-74 • When the vehicle in the next lane moves two lanes away from you OR when the vehicle two lanes away moves to the next lane from you. • A motorcycle or bicycle is near. • A flat trailer is near. • If there are small objects in the detecting area such as a shopping cart or a baby stroller. • If there is a low height vehicle such as a sports car. • The brake pedal is depressed. • ESC (Electronic Stability Control) is activated. • ESC (Electronic Stability Control) malfunctions. • The tire pressure is low or a tire is damaged. • The brake is reworked. • The vehicle sharply stops. • Temperature is extremely low around the vehicle. • The vehicle severely vibrates while driving over a bumpy road, uneven/ bumpy road, or concrete patch. • The vehicle drives on a slippery surface due to snow, water puddle, or ice. OTM058102L [A] : Structure • Driving where there is a vehicle or structure near The system may not operate properly when driving where there is a vehicle or structure near. In certain instances, the system may not detect the vehicle approaching from behind and the warning or brake may not operate properly. Always pay attention to your surrounding while driving. OTM058103 OTM058104L [A] : Vehicle • When the vehicle is parked diagonally The system may not operate properly when the vehicle is parked diagonally. In certain instances, when the diagonally parked vehicle is pulled out of the parking space, the system may not detect the vehicle approaching from the rear left/right of your vehicle. In this case, the warning or brake may not operate properly. Always pay attention to your surrounding while driving. OFE058127N • When the vehicle is on/near a slope The system may not operate properly when the vehicle is on/near a slope. In certain instances, the system may not detect the vehicle approaching from the rear left/right and the warning or brake may not operate properly. Always pay attention to your surrounding while driving. 5-75 5 Driving your vehicle • When the vehicle is in a complex parking environment The system may not operate properly when the vehicle is in a complex parking environment. In certain instances, the system may not be able to exactly determine the risk of collision for the vehicles which are parking or pulling out near your vehicle (for example, a vehicle escaping beside your vehicle, a vehicle parking or pulling out in the rear area, a vehicle approaching your vehicle making a turn, etc.). If this occurs, the warning or brake may not operate properly. Driving your vehicle i Information OTM058106L [A] : Structure, [B] : Wall • Pulling into the parking space where there is a structure The system may not operate properly when pulling in the vehicle to the parking space where there is a structure at the back or side of your vehicle. In certain instances, when backing into the parking space, the system may not detect the vehicle moving in front of your vehicle. In this case, the warning or brake may not operate properly. Always pay attention to the parking space while driving. 5-76 OTM058107 • When the vehicle is parked rearward If the vehicle is parked rearward and the sensor detects another vehicle in the rear area of the parking space, the system can warn or control braking. Always pay attention to the parking space while driving. This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. BLIND-SPOT VIEW MONITOR SYSTEM (IF EQUIPPED) Operating conditions With the vehicle on, select the "Driver assistance → Blind-spot safety → Blind-spot view" from the vehicle settings in the Infotainment system screen. Then the corresponding left or right side of the vehicle will be displayed on the cluster if the driver turns on the turn signal while driving. System operation ■ Left OFE058057N OFE051055N 5 ■ Right Driving your vehicle The Blind-Spot View Monitor system is designed to help driving by providing broader view than the outer side view mirror by displaying rear/side area view on the cluster when the driver turns on the turn signal to change lane. The system shows the following vehicle on the corresponding side using the cameras at the outside rearview mirrors when the driver turns on the turn signal to change lane. OFE052056N Operate the turn signal while driving and the corresponding left or right side rear view will be shown on the cluster. 5-77 Driving your vehicle Blind-Spot View Monitor system warning View may be obscured due to weather conditions This message is displayed if the camera recognition system cannot detect the following vehicle due to the weather condition and the system may not operate properly. Check the surrounding condition visually and with the outer side view mirror when driving. 5-78 LANE KEEPING ASSIST (LKA) SYSTEM WARNING The Lane Keeping Assist (LKA) system is not a substitute for safe driving practices, but a convenience function only. It is the responsibility of the driver to always be aware of the surrounding and steer the vehicle. OFE052038N WARNING Take the following precautions when using the Lane Keeping Assist (LKA) system: • Do not steer the steering wheel suddenly when the steering wheel is being assisted by the system. • LKA system helps to prevent the driver from moving out of the lane unintentionally by assisting the driver's steering. However, the driver should not solely rely on the system but always pay attention on the steering wheel to stay in the lane. tem can be canceled or not work properly according to road condition and surroundings. Always be cautious when driving. • Do not disassemble the LKA system camera temporarily to tint the window or attach any types of coatings and accessories. If you disassemble the camera and assemble it again, take your vehicle to an authorized HYUNDAI dealer and have the system checked for calibration. • When you replace the windshield glass, LKA system camera or related parts of the steering wheel, take your vehicle to an authorized HYUNDAI dealer and have the system checked for calibration. 5-79 5 Driving your vehicle The Lane Keeping Assist (LKA) system helps detect lane markers on the road with a front view camera at the front windshield, and assists the driver's steering to help keep the vehicle between lanes. When the system detects the vehicle straying from its lane, it alerts the driver with a visual and audible warning, while applying a counter-steering torque, to try to prevent the vehicle from moving out of its lane. • The operation of the LKA sys- Driving your vehicle • The system detects lane lines • • • • • and controls the steering wheel by a camera, therefore, if the lane lines are hard to detect, the system may not work properly. Please refer to "Limitations of the system". Do not remove or damage the related parts of LKA system. You may not hear a warning sound of LKA system because of excessive audio sound. If any other warning sound such as seat belt warning chime is already generated, the Lane Keeping Assist (LKA) system warning may not sound. Do not place objects on the dashboard that reflects light such as mirrors, white paper, etc. The system may malfunction if the sunlight is reflected. Always have your hands on the steering wheel while the LKA system is activated. Also, when Active LKA is selected from the 5-80 User Settings mode and if you continue to drive with your hands off the steering wheel after the "Keep hands on steering wheel" warning message appears, the system will stop controlling the steering wheel. However, if the driver has their hands on the steering wheel again, the system will start controlling the steering wheel. • The steering wheel is not continuously controlled so if the vehicle speed is at a higher speed when leaving a lane the vehicle may not be able to be controlled by the system. The driver must always follow the speed limit when using the system. • If you attach objects to the steering wheel, the system may not assist steering or the hands off alarm may not work properly. When you tow a trailer, make sure that you turn off the LKA system. • When you tow a trailer, make sure that you turn off the LKA system. LKA System Operation OFE058189N With the POWER button in the ON position, press the LKA button located on the instrument panel on the lower left hand side of the driver. • The indicator ( ) in the cluster display will initially illuminate white. • When the indicator(white) activated in the previous ignition cycle, the system turns on without any control. • If you press the LKA button again, the indicator on the cluster display will go off. The color of indicator will change depending on the condition of LKA system. LKA system activation WARNING The Lane Keeping Assist (LKA) is a system to help prevent the driver from leaving the lane. However, the driver should not solely rely on the system but always check the road conditions when driving. - White : Sensor does not detect lane markers or vehicle speed is under 37 mph (60 km/h). - Green : Sensor detects lane markers and the system is able to control vehicle steering. i Information OFE050193 5 • After LKA is activated, if both lane markers are detected, vehicle speed is over 37 mph (60 km/h) and all the activation conditions are satisfied, LKA indicator will change to green and the steering wheel will be controlled. Driving your vehicle If the indicator (white) is activated from the previous ignition cycle, the system will turn ON without any additional control. If you press the LKA switch again, the indicator on the cluster goes off. 5-81 Driving your vehicle • If your vehicle departs from the projected lane in front of you, the LKA system operates as follows: ■ Lane marker undetected ■ Left lane marker OFE050193 ■ Lane marker detected OFE050091 ■ Right lane marker OFE050126 • If vehicle speed is over 37 mph (60 km/h) and the system detects lane markers, the color changes from gray to white. • Both lane markers must be detected for the system to fully activate. 5-82 OFE050092 1. A visual warning appears on the cluster LCD display. Either the left lane marker or the right lane marker in the cluster LCD display will blink depending on which direction the vehicle is veering. Also, a warning sound will be heard. 2. The LKA system will control the vehicle's steering to prevent the vehicle from crossing the lane maker in below conditions. - Vehicle speed is over 37 mph (60 km/h) - The system detects both lane markers - When driving, the vehicle is located between both lanes normally. - The steering wheel is not turned suddenly. When lanes are detected and all the conditions to activate the LKA system are satisfied, a LKA system indicator light ( ) will change from white to green. This indicates that the LKA system is in the ENABLED state and the steering wheel will be able to be controlled. Warning Light and Message Place hands on the steering wheel WARNING The warning message may appear late according to road conditions. Therefore, always have your hands on the steering wheel while driving. WARNING • The driver is responsible for accurate steering. • Turn off the system in below i Information situations. - In bad weather - In bad road condition - When the steering wheel needs to be controlled by the driver frequently. • Even though the steering is assisted by the system, the driver can still steer to control the steering wheel. • The steering wheel may feel heavier when the steering wheel is assisted by the system than when it is not. Check Lane Keeping Assist (LKA) system If there is a problem with the system a message will appear for a few seconds. If the problem continues the LKA system failure indicator will illuminate. If the steering wheel is held very lightly, the message may still appear because the LKA system may not recognize that the driver has their hands on the wheel. 5-83 5 Driving your vehicle OFE051115N If the driver takes their hands off the steering wheel for several seconds while the LKA system is activated, the system will warn the driver. i Information Driving your vehicle LKA system failure indicator The LKA system failure indicator (yellow) will illuminate if the LKA system is not working properly. Have your vehicle checked by an authorized HYUNDAI dealer. When there is a problem with the system do one of the following: • Turn the system on after turning the vehicle off and on again. • Check if the POWER button is in the ON position. • Check if the system is affected by the weather. (for example, fog, heavy rain, etc.) • Check if there is foreign matter on the camera lens. If the problem is not solved, have your vehicle checked by an authorized HYUNDAI dealer. 5-84 The LKA system will not be in the ENABLED state and/or the steering wheel will not be assisted when: • The turn signal is turned on before changing a lane. If you change lanes without the turn signal on, the steering wheel might be controlled. • The vehicle is not driven in the middle of the lane when the system is turned on or right after changing a lane. • ESC (Electronic Stability Control) or VSM (Vehicle Stability Management) is activated. • The vehicle is driven on a sharp curve. • Vehicle speed is below 37 mph (60 km/h) and over 110 mph (180 km/h). • The vehicle makes sharp lane changes. • The vehicle brakes suddenly. • The lane is very wide or narrow. • There are more than two lane lines on the road. (for example, construction area) • Only one side of the lane marker is detected. • Radius of a curve is too small. • The vehicle is driven on a steep incline. • The steering wheel is turned suddenly. Limitations of the System The LKA system may operate prematurely even if the vehicle does not depart from the intended lane, OR, the LKA system may not warn you if the vehicle leaves the intended lane under the following circumstances: When external conditions intervene • The brightness outside changes suddenly such as when entering or exiting a tunnel, or when passing under a bridge. • The brightness outside is too low such as when the headlights are not on at night or the vehicle is going through a tunnel. • There is a boundary structure in the roadway such as a concrete barrier, guardrail and reflector post that is inadvertently being detected by the camera. • When light coming from a street light or an oncoming vehicle is reflected on a wet road surface such as a puddle in the road. • The field of view in front is obstructed by sun glare. • There is not enough distance between you and the vehicle in front to be able to detect the lane marker or the vehicle ahead is driving on the lane marker. • Driving on a steep grade, over a hill, or when driving on a curved road. • The adverse road conditions cause excessive vehicle vibrations while driving. • The surrounding of the inside rear view mirror temperature is high due to direct sunlight, etc. 5-85 5 Driving your vehicle When the lane and road conditions are poor • It is difficult to distinguish the lane marker from the road because the lane marker is covered with dust or sand. • It is difficult to distinguish the color of the lane marker from the road. • There are markings on the road surface that look like a lane marker that is inadvertently being detected by the camera. • The lane marker is indistinct or damaged. • The lane marker is merged or divided. (for example, tollgate) • The lane number increases or decreases or the lane marker are crossing complicatedly. • There are more than two lane markers on the road in front of you. • The lane marker is very thick or thin. • The lane is very wide or narrow. • The lane marker ahead is not visible due to rain, snow, water on the road, damaged or stained road surface, or other factors. • The shadow is on the lane marker by a median strip, trees, guardrail, noise barriers, etc. • The lane markers are complicated or a structure substitutes for the lines such as a construction area. • There are crosswalk signs or other symbols on the road. • The lane marker in a tunnel is stained with oil, etc. • The lane suddenly disappears such as at the intersection. Driving your vehicle When front visibility is poor • The windshield or the camera lens is blocked with dirt or debris. • The windshield glass is fogged up; a clear view of the road is obstructed. • Placing objects on the dashboard, etc. • The sensor cannot detect the lane because of fog, heavy rain or snow. WARNING The Lane Keeping Assist (LKA) system is a system to help prevent the driver from leaving the lane. However, the driver should not solely rely on the system but always take the necessary actions for safe driving practices. 5-86 LKA System Function Change Lane Departure Warning The driver can change LKA to the Lane Departure Warning (LDW) system or change the LKA system mode from the Infotainment system screen. Go to the "Vehicle settings → Driver Assistance → Lane Safety → Lane Keeping Assist (LKA)/Lane Departure Warning (LDW)/Off". The system is automatically set to Lane Keeping Assist (LKA) if a function is not selected. LDW system alerts the driver with a visual warning and a warning alarm when the system detects the vehicle departing the lane. The steering wheel will not be controlled. lane Keeping Assist (LKA) This mode guides the driver to help keep the vehicle within the lanes. It rarely controls the steering wheel, when the vehicle drives well inside the lanes. However, it starts to control the steering wheel, when the vehicle is about to deviate out of the lane. Off If you select "Off", the LKA system is deactivated. LANE FOLLOWING ASSIST (LFA) SYSTEM (IF EQUIPPED) WARNING The Lane Following Assist (LFA) system is not a substitute for safe driving practices, but a convenience function. It is the responsibility of the driver to always be aware of the surrounding and steer the vehicle. OFE052038N WARNING Take the following precautions when using the Lane Following Assist (LFA) system: • Do not steer the steering wheel unnecessarily when the steering wheel is being assisted by the system. • LFA system helps the driver to keep the vehicle in the center of the lane by assisting the driver's steering. However, the driver should not solely rely on the system but always pay attention on the steering wheel to stay in the lane. tem can be canceled or not work properly according to road condition and surroundings. Always be cautious when driving. • Do not disassemble the LFA system camera temporarily to tint the window or attach any types of coatings and accessories. If you disassemble the camera and assemble it again, have your vehicle to an authorized HYUNDAI dealer and have the system checked for calibration. • When you replace the windshield glass, LFA system camera or related parts of the steering wheel, have your vehicle to an authorized HYUNDAI dealer and have the system checked for calibration. 5-87 5 Driving your vehicle The Lane Following Assist (LFA) system helps detect lane markers on the road with a front view camera at the front windshield, and assists the driver's steering to help keep the vehicle between lanes. • The operation of the LFA sys- Driving your vehicle • The system detects lane • • • • markers and controls the steering wheel by a camera, therefore, if the lane markers are hard to detect, the system may not work properly. Please refer to "Limitations of the system". Do not remove or damage the related parts of LFA system. You may not hear a warning sound of LFA system because of excessive audio sound. Do not place objects on the dashboard that reflects light such as mirrors, white paper, etc. The system may malfunction if the sunlight is reflected. Always have your hands on the steering wheel while the LFA system is activated. If you continue to drive with your hands off the steering wheel after the "Keep hands on steering wheel" warning message appears, the system will be turned off automatically. 5-88 However, if the driver has their hands on the steering wheel again, the system will start controlling the steering wheel. • The steering wheel may not be continuously controlled by the system if the vehicle speed is too high. The driver must always follow the speed limit when using the system. • If you attach objects to the steering wheel, the system may not assist steering normally or the hands off alarm may not work properly. • When you tow a trailer, make sure that you turn off the LFA system. LFA operation The driver can turn on the LFA system with the vehicle on and by selecting "Vehicle settings → Driver assistance → Driving assist → LFA (Lane Following Assist)" in the Infotainment system screen. The set-up of the LFA system will be maintained, as selected, when the vehicle is restarted. Operating conditions LFA activation • When the system does not recognize the lane or depending on the vehicle condition in front (presence of the vehicle, driving status, etc.). the steering wheel is controlled restrictively. When the control of the steering wheel is stopped temporarily the activation indicator blinks in green and then changes to white. The system is activated when the Lane Following Assist is selected from the vehicle Settings mode when the following conditions are satisfied: - The Smart Cruise Control is in activation (vehicle deceleration and acceleration) - Vehicle speed is lower than 90 mph (145 km/h) OFE050126 5 • After LFA is activated, if the vehicle is within the lane and both lane markers are detected (lane color changes grey to white) and there is no abrupt steering by the driver, indicator light will change from white to green. This indicates that the LFA system is in the ASSIST state and the steering wheel will be able to be controlled. Driving your vehicle When the system is activated, the indicator ( ) on the cluster will illuminate. The color of the indicator will change depending on the condition of LFA system. - Green : The system is in the assist state. - White : The system is in the ready state. 5-89 Driving your vehicle Warning message WARNING The warning message may appear late according to road conditions. Therefore, always have your hands on the steering wheel while driving. OTM070117N OFE051115N Place hands on the steering wheel If the driver takes their hands off from the steering wheel for certain time while the LFA system is activated, the system will warn the driver. i Information If the steering wheel is held very lightly the message may still appear because the LFA system may not recognize that the driver has their hands on the wheel. 5-90 Lane Following Assist (LFA) canceled If the driver still does not have their hands on the steering wheel after the message "Keep hands on steering wheel", the system will not control the steering wheel and warn the driver only when the driver crosses the lane markers. However, if the driver has their hands on the steering wheel again, the system will start controlling the steering wheel. WARNING • The driver is responsible for accurate steering. • Turn off the system and drive the vehicle in following situations. - In bad weather - In bad road condition - When the steering wheel needs to be controlled by the driver frequently. • Even though the steering is assisted by the system, the driver may control the steering wheel. • The steering wheel may feel heavier when the steering wheel is assisted by the system than when it is not. 5-91 5 Driving your vehicle i Information OTM070118N Check Lane Following Assist (LFA) system If there is a problem with the system a message will appear for a few seconds. Have the vehicle checked by an authorized HYUNDAI dealer. The LFA system will not be in the ASSIST state when : • The turn signal is turned on before changing a lane. If you change lanes without the turn signal on, the steering wheel might be controlled. • The vehicle is not driven in the middle of the lane when the system is turned on or right after changing a lane. • ESC (Electronic Stability Control) or VSM (Vehicle Stability Management) is activated. • The vehicle is driven on a sharp curve with high speed. • Vehicle speed is over 90 mph (145 km/h). • The vehicle makes sharp lane changes. • The vehicle brakes suddenly. • Only one lane marker is detected. • The lane is very wide or narrow. • Radius of a curve is too small. • The vehicle is driven on a steep incline. • The steering wheel is turned suddenly. Driving your vehicle Limitations of the system The LFA system may operate prematurely even if the vehicle does not depart from the intended lane, OR, the LFA system may not assist your steering if the vehicle leaves the intended lane under the following circumstances: When the lane and road conditions are poor • It is difficult to distinguish the lane marking from the road surface or the lane marking is faded or not clearly marked. • It is difficult to distinguish the color of the lane marker from the road. • There are markings on the road surface that look like a lane marker that is inadvertently being detected by the camera. • The lane marker is indistinct or damaged. • The lane marker is merged or divided. (for example, tollgate) 5-92 • The lane number increases or decreases or the lane marker are crossing complicatedly. • There are more than two lane markers on the road in front of you. • The lane marker is very thick or thin. • The lane marker ahead is not visible due to rain, snow, water on the road, damaged or stained road surface, or other factors. • The shadow is on the lane marker by a median strip, trees, guardrail, noise barriers, etc. • The lane markers are complicated or a structure substitutes for the lines such as a construction area. • There are crosswalk signs or other symbols on the road. • The lane suddenly disappears such as at the intersection. When external condition is intervened • The brightness outside changes suddenly such as when entering or exiting a tunnel, or when passing under a bridge. • The brightness outside is too low such as when the headlights are not on at night or the vehicle is going through a tunnel. • There is a boundary structure in the roadway such as a concrete barrier, guardrail and reflector post that is inadvertently being detected by the camera. • When light coming from a street light or an oncoming vehicle is reflected on a wet road surface such as a puddle in the road. • The field of view in front is obstructed by sun glare. • There is not enough distance between you and the vehicle in front to be able to detect the lane marker or the vehicle ahead is driving on the lane marker. • Driving on a steep grade, over a hill, or when driving on a curved road. • The adverse road conditions cause excessive vehicle vibrations while driving. • The surrounding of the inside rear view mirror temperature is high due to direct sunlight, etc. When front visibility is poor • The windshield or the camera lens is blocked with dirt or debris. • The windshield glass is fogged up; a clear view of the road is obstructed. • Placing objects on the dashboard, etc. • The sensor cannot detect the lane because of fog, heavy rain or snow. 5 Driving your vehicle 5-93 Driving your vehicle DRIVER ATTENTION WARNING (DAW) SYSTEM The Driver Attention Warning (DAW) system can help determine the condition of the driver's fatigue and inattention. System Setting and Activation System setting • To turn ON the Driver Attention Warning (DAW) system, turn on the vehicle, and then select 'Vehicle settings → Driver Assistance → Driver Attention Warning → High sensitivity/Normal sensitivity’ on the Infotainment system screen. • The driver can select the mode of the Driver Attention Warning (DAW) system. - High sensitivity : The Driver Attention Warning system helps alert the driver of his/her fatigue level or inattentive driving practices faster than Normal mode. - Normal sensitivity : The Driver Attention Warning system helps alert the driver of his/her fatigue level or inattentive driving practices. - Off : The Driver Attention Warning system is deactivated. • The set-up of the Driver Attention Warning system will be maintained, as selected, when the vehicle is re-started. Driver's attention level ■ System off OTM070102N ■ Attentive driving OFE051097N 5-94 • When the driver turns on the system while driving, it displays 'Last Break time' and level reflected that. ■ Inattentive driving Take a break OFE051098N OTM070105L • The "Consider taking a break" message appears on the LCD display and a warning sounds in order to suggest the driver to take a break, when the driver’s attention level is below 1. • The Driver Attention Warning (DAW) system does not suggest the driver to take a break, when the total driving time is shorter than 10 minutes. • The last break time is set to 00:00 and the driver's attention level is set to 5 (very attentive) when the driver resets the Driver Attention Warning (DAW) system. • The Driver Attention Warning (DAW) system resets in the following situations. - The vehicle is turned OFF. - The driver unfastens the seat belt and then opens the driver's door. - The vehicle is stopped for more than 10 minutes. • The Driver Attention Warning (DAW) system operates again, when the driver restarts driving. 5-95 5 Driving your vehicle • The driver can monitor their driving conditions on the LCD display. The DAW screen will appear when you select the Assist mode tab ( ) on the LCD display if the system is activated. For more details, refer to "LCD Display Modes" in chapter 3. • The driver's attention level is displayed on the scale of 1 to 5. The lower the number is, the more inattentive the driver is. • The number decreases when the driver does not take a break for a certain period of time. • The number increases when the driver attentively drives for a certain period of time. Resetting the System Driving your vehicle System Standby System Malfunction WARNING • The Driver Attention Warning OTM070106N OTM070107L The Driver Attention Warning (DAW) system enters the ready status and displays the 'Standby' screen in the following situations. - The camera sensor keeps failing to detect the lanes. - Driving speed remains under 40 mph (64 km/h) or over 110 mph (177 km/h). Check Driver Attention Warning (DAW) system When the warning message appears, the system is not working properly. In this case, have the vehicle inspected by an authorized HYUNDAI dealer. 5-96 system is not a substitute for safe driving practices, but a convenience function only. It is the responsibility of the driver to always drive cautiously to prevent unexpected and sudden situations from occurring. Pay attention to the road conditions at all times. • The system may suggest a break according to the driver's driving pattern or habits even if the driver doesn't feel fatigue. • The driver, who feels fatigued, should take a break, even though there is no break suggestion by the Driver Attention Warning system. NOTICE CAUTION The Driver Attention Warning (DAW) system may not properly operate with limited alerting in the following situations: • The lane detection performance is limited. (For more details, refer to "Lane Keeping Assist (LKA) system" in this chapter.) • The vehicle is violently driven or is abruptly turned for obstacle avoidance (for example, construction area, other vehicles, fallen objects, bumpy road). • Forward drivability of the vehicle is severely undermined (possibly due to wide variation in tire pressures, uneven tire wear-out, toe-in/toe-out alignment). • The vehicle drives on a curvy road. • The vehicle drives on a bumpy road. • The vehicle drives through a windy area. • The vehicle is controlled by the following driving assist systems: - Lane Keeping Assist (LKA) system - Forward Collision-Avoidance Assist (FCA) system - Smart Cruise Control (SCC) system - Lane Following Assist (LFA) system CAUTION Playing the vehicle audio system at high volume may offset the Driver Attention Warning (DAW) system warning sounds. 5-97 5 Driving your vehicle The Driver Attention Warning system utilizes the camera sensor on the front windshield for its operation. To keep the camera sensor in the best condition, you should observe the followings: • Do not disassemble the camera temporarily to tint the window or to attach any types of coatings and accessories. If you disassemble a camera and assemble it again, take your vehicle to an authorized HYUNDAI dealer and have the system checked for calibration. • NEVER install any accessories or stickers on the front windshield, nor tint the front windshield. • NEVER locate any reflective objects (for example, white paper, mirror) over the dashboard. Any light reflection may cause a malfunction of the Driver Attention Alert (DAW) system. • Pay extreme caution to keep the camera sensor out of water. Driving your vehicle SMART CRUISE CONTROL WITH STOP & GO SYSTEM WARNING For your safety, please read the owner's manual before using the Smart Cruise Control system. WARNING OFE051060N ➀ Cruise indicator ( ➁ Set speed ➂ Vehicle-to-vehicle distance ) The Smart Cruise Control System allows you to program the vehicle to help maintain a constant speed and distance detecting the vehicle ahead without depressing the accelerator/ brake pedal. 5-98 The Smart Cruise Control system is not a substitute for safe driving practices, but a convenience function only. It is the responsibility of the driver to always check the speed, distance to the vehicle ahead and road & driving conditions. WARNING Take the following precautions : • Always set the vehicle speed under the speed limit in your country. • If the Smart Cruise Control is left on, (cruise ( ) indicator light in the instrument cluster is illuminated) the Smart Cruise Control can be activated unintentionally. Keep the Smart Cruise Control System off (cruise ( ) indicator light OFF) when the Smart Cruise Control is not in use, to avoid inadvertently setting a speed. • Use the Smart Cruise Control System only when traveling on open highways in good weather. WARNING • Do not use the Smart Cruise Smart Cruise Control Switch OFE058170N CRUISE: Turns cruise control system on or off. RES+: Resumes or increases cruise control speed. SET-: Sets or decreases cruise control speed. : Sets vehicle-to-vehicle distance. CANCEL: Cancels cruise control operation. 5-99 5 Driving your vehicle Control when it may not be safe to keep the vehicle at a constant speed: - When driving in heavy traffic or when traffic conditions make it difficult to drive at a constant speed - When driving on rainy, icy, or snow-covered roads - When driving on hilly or windy roads - When driving in windy areas - When driving in parking lots - When driving near crash barriers - When driving on a sharp curve - When driving with limited view (possibly due to bad weather, such as fog, snow, rain or sandstorm) - When the vehicle sensing ability decreases due to vehicle modification resulting level difference of the vehicle's front and rear Driving your vehicle To Adjust the Sensitivity of Smart Cruise Control To Convert to Cruise Control Mode The sensitivity of vehicle speed when following the front vehicle to maintain the set distance can be adjusted. Go to the 'Vehicle settings → Driver Assistance → SCC Reaction → Fast/Normal/Slow' on the Infotainment system screen. You may select one of the three stages you prefer. • Fast: Vehicle speed following the front vehicle to maintain the set distance is faster than normal speed. • Normal: Vehicle speed following the front vehicle to maintain the set distance is normal. • Slow: Vehicle speed following the front vehicle to maintain the set distance is slower than normal speed. The driver may choose to switch to use the conventional Cruise Control mode (speed only control function) by following these steps: 1. Push the CRUISE button on the steering wheel to turn the system on. The cruise ( ) indicator will illuminate. 2. Push and hold the Vehicle-toVehicle Distance button for more than 2 seconds. 3. Choose between "Smart Cruise Control" and "Cruise Control". When the system is canceled using the CRUISE button or the CRUISE button is used after the vehicle is turned on, the Smart Cruise Control mode will turn on. i Information The last selected speed sensitivity of the smart cruise control is remained in the system. 5-100 WARNING When using the conventional Cruise Control mode, you must manually adjust the distance to other vehicles by depressing the brake pedal. The system does not automatically adjust the distance to vehicles in front of you. i Information Smart Cruise Control Speed To set Smart Cruise Control speed • Vehicle speed may decrease on an upward slope and increase on a downward slope. • When you are setting the cruise control speed, with a vehicle in front and your vehicle speed is between 0 ~ 20 mph (0 ~ 30 km/h), the speed will set to 20 mph (30 km/h). OFE058062N OFE058061N 5 Driving your vehicle 1. Push the CRUISE button on the steering wheel to turn the system on. The cruise indicator will illuminate. 2. Accelerate to the desired speed. The Smart Cruise Control speed can be set as follows: • 6 – 100 mph (10 - 160 km/h) : when there is no vehicle in front • 0 – 100 mph (0 - 160 km/h) : when there is a vehicle in front 3. Push the toggle switch down (SET-), and release it at the desired speed. The Set Speed and Vehicle-to-Vehicle Distance on the LCD display will illuminate. 4. Release the accelerator pedal. The desired speed will automatically be maintained. If there is a vehicle in front of you, the speed may decrease to maintain the distance to the vehicle ahead. On a steep grade, the vehicle may slow down or speed up slightly while going uphill or downhill. 5-101 Driving your vehicle To increase Smart Cruise Control set speed CAUTION To decrease the Smart Cruise Control set speed Check the driving condition before using the toggle switch. Driving speed sharply increases, when you push up and hold the toggle switch. OFE058063N OFE058062N Follow either of these procedures: • Push the toggle switch up (RES+), and release it immediately. The cruising speed will increase by 1 mph (1 km/h) each time you move the toggle switch up in this manner. • Push the toggle switch up (RES+), and hold it. Your vehicle set speed will increase by 5 mph (10 km/h). Release the toggle switch at the speed you want. You can set the speed to 105 mph (170 km/h). Follow either of these procedures: • Push the toggle switch down (SET-), and release it immediately. The cruising speed will decrease by 1 mph (1 km/h) each time you move the toggle switch down in this manner. • Push the toggle switch down (SET-), and hold it. Your vehicle set speed will decrease by 5 mph (10 km/h). Release the toggle switch at the speed you want. • You can set the speed to 20 mph (30 km/h). 5-102 To temporarily accelerate with the Smart Cruise Control on If you want to speed up temporarily when the Smart Cruise Control is on, depress the accelerator pedal. Increased speed will not interfere with Smart Cruise Control operation or change the set speed. To return to the set speed, take your foot off the accelerator pedal. If you push the toggle switch down (SET-) at increased speed, the cruising speed will be set again pedal. Smart Cruise Control set speed will be temporarily canceled when: Be careful when accelerating temporarily, because the speed is not controlled automatically at this time even if there is a vehicle in front of you. OFE058064N Canceled manually • Depressing the brake pedal. • Pushing the CANCEL button located on the steering wheel. • Depress the brake pedal and press the button at the same time, when the vehicle is at a standstill. The Smart Cruise Control turns off temporarily when the Set Speed and Vehicle-to-Vehicle Distance indicator on the LCD display turns off. The cruise indicator is illuminated continuously. • The driver's door is opened. • The vehicle is shifted to N (Neutral), R (Reverse) or P (Park). • The EPB (Electronic Parking Brake) is applied. • The vehicle speed is over 105 mph (170 km/h). • The vehicle stops on a steep incline. • The ESC (Electronic Stability Control), TCS (Traction Control System) or ABS is operating. • The ESC is turned off. • The sensor or the cover is dirty or blocked with foreign matter. • The vehicle is stopped for a certain period of time. • The vehicle stops and goes repeatedly for a long period of time. • The accelerator pedal is continuously depressed for a long period of time. • The driving performance is abnormal. 5-103 5 Driving your vehicle CAUTION Canceled automatically Driving your vehicle • The driver starts driving by pushing the toggle switch up (RES+)/down (SET-) or depressing the accelerator pedal, after the vehicle is stopped by the Smart Cruise Control system with no other vehicle ahead. • The driver starts driving by pushing the toggle switch up (RES+)/down (SET-) or depressing the accelerator pedal, after stopping the vehicle with a vehicle stopped far away in front. • The Forward Collision-Avoidance Assist (FCA) is activated. Each of these actions will cancel the Smart Cruise Control operation. The Set Speed and Vehicle-to-Vehicle Distance on the LCD display will go off. In a condition the Smart Cruise Control is cancelled automatically, the Smart Cruise Control will not resume even though the RES+ or SET- toggle switch is pushed. 5-104 i Information If the Smart Cruise Control is canceled by other than the reasons mentioned, have the system checked by an authorized HYUNDAI dealer. OTM070113N Smart Cruise Control canceled If the system is cancelled, the warning chime will sound and a message will appear for a few seconds. You must adjust the vehicle speed by depressing the accelerator or brake pedal according to the road condition ahead and driving condition. Always check the road conditions. Do not rely on the warning chime. To resume Smart Cruise Control set speed If any method other than the cruise toggle switch was used to cancel cruising speed and the system is still activated, the cruising speed will automatically resume when you push the toggle switch up (RES+) or down (SET-). If you push the toggle switch up (RES+), the speed will resume to the recently set speed. However, if vehicle speed drops below 20 mph (30 km/h), it will resume when there is a vehicle in front of your vehicle. Always check the road conditions when you push the toggle switch up (RES+) to resume speed. Smart Cruise Control Vehicleto-Vehicle Distance To set Vehicle-to-Vehicle Distance OFE058061N • Push the CRUISE button (the cruise indicator light will go off). If you wish not to use the cruise control system, always turn the system off by pushing the CRUISE button. 5 OFE058066N When the Smart Cruise Control system is ON, you can set and maintain the distance from the vehicle ahead of you without pressing the accelerator or brake pedal. 5-105 Driving your vehicle CAUTION To turn Cruise Control off Driving your vehicle Each time the button is pressed, the vehicle to vehicle distance changes as follows: Distance 4 Distance 3 When the lane ahead is clear: When there is a vehicle ahead of you in your lane: Distance 2 Distance 1 For example, if you drive at 56 mph (90 km/h), the distance is maintained as follows: Distance Distance Distance Distance 4 3 2 1 - approximately approximately approximately approximately 172 feet 130 feet 106 feet 82 feet i Information The distance is set to the last set distance when the system is used for the first time after starting the vehicle. 5-106 OFE051067N The vehicle speed will maintain the set speed. Distance 4 Distance 3 Distance 2 Distance 1 OFE051071N/OFE051070N OFE051069N/OFE051068N • Your vehicle speed will slow down or speed up to maintain the selected distance. • If the vehicle ahead speeds up, your vehicle will travel at a steady cruising speed after accelerating to the set speed. • If distance from the front vehicle has changed due to accelerating or decelerating of the front vehicle, the distance on the LCD display may change. WARNING • Even if the warning chime is not activated, always pay attention to the driving conditions to prevent dangerous situations from occurring. • Playing the vehicle audio system at high volume may offset the system warning sounds. CAUTION OFE051073N When using the Smart Cruise Control system: • The warning message appears and warning chime sounds if the vehicle is unable to maintain the selected distance from the vehicle ahead. • If the warning message appears and warning chime sounds, depress the brake pedal or use the steering wheel toggle switch to actively adjust the vehicle speed, and the distance to the vehicle ahead. If the vehicle ahead (vehicle speed: less than 20 mph (30 km/h)) disappears to the next lane, the warning chime will sound and a message "Watch for surrounding vehicles" will appear. Adjust your vehicle speed for vehicles or objects that can suddenly appear in front of you by depressing the brake pedal. Always pay attention to the road condition ahead. 5-107 5 Driving your vehicle OFE041491N Driving your vehicle In traffic situation • If you push the smart cruise control toggle switch (RES+ or SET-) while Auto Hold and smart cruise control is operating the Auto Hold will be released regardless of accelerator pedal operation and the vehicle will start to move. The AUTO HOLD indicator changes from green to white. Sensor to Detect Distance to the Vehicle Ahead ■ Front radar OTM070114L Use switch or pedal to accelerate • In traffic, your vehicle will stop if the vehicle ahead of you stops. Also, if the vehicle ahead of you starts moving, your vehicle will start as well. However, if the vehicle stops for more than 3 seconds, you must depress the accelerator pedal or push up the toggle switch (RES+) or push down the toggle switch (SET-) to start driving. OFE058106N ■ Front view camera OFE052038N The Smart Cruise Control uses a sensor to detect distance to the vehicle ahead. 5-108 If the sensor is covered with dirt or other foreign matter, the vehicle to vehicle distance control may not operate correctly. Always keep the sensor clean. Warning message i Information For the SCC operation is temporarily stopped if the radar is blocked, but you wish to use conventional cruise control mode (speed only control function), you must convert to the cruise control mode (refer to "To convert to Cruise Control mode" in this chapter). CAUTION OTM070115N • Do not apply license plate frame or foreign objects such as a bumper sticker or a bumper guard near the radar sensor. Doing so may adversely affect the sensing performance of the radar. • Always keep the radar sensor and lens cover clean and free of dirt and debris. • Use only a soft cloth to wash the vehicle. Do not spray pressurized water directly on the sensor or sensor cover. 5-109 5 Driving your vehicle Smart Cruise Control disabled. Radar blocked When the sensor lens cover is blocked with dirt, snow, or debris, the Smart Cruise Control system operation may stop temporarily. If this occurs, a warning message will appear on the LCD display. Remove any dirt, snow, or debris and clean the radar sensor lens cover before operating the Smart Cruise Control system. The Smart Cruise Control system may not properly activate, if the radar is totally contaminated, or if any substance is not detected after turning on the vehicle (for example, in an open terrain). Driving your vehicle Limitations of the System • Be careful not to apply unnecessary force on the radar sensor or sensor cover. If the sensor is forcibly moved out of proper alignment, the Smart Cruise Control system may not operate correctly. In this case, a warning message may not be displayed. Have the vehicle inspected by an authorized HYUNDAI dealer. • If the front bumper becomes damaged in the area around the radar sensor, the Smart Cruise Control System may not operate properly. Have the vehicle inspected by an authorized HYUNDAI dealer. • Use only genuine HYUNDAI parts to repair or replace a damaged sensor or sensor cover. Do not apply paint to the sensor cover. 5-110 The Smart Cruise Control system may have limits to its ability to detect distance to the vehicle ahead due to road and traffic conditions. OTM070116N Check Smart Cruise Control System The message will appear when the vehicle to vehicle distance control system is not functioning normally. Take your vehicle to an authorized HYUNDAI dealer and have the system checked. On curves On inclines OTM058073 OTM058117 OFE058041 • During uphill or downhill driving, the Smart Cruise Control system may not detect a moving vehicle in your lane, and cause your vehicle to accelerate to the set speed. Also, the vehicle speed will rapidly decrease when the vehicle ahead is recognized suddenly. • Select the appropriate set speed on inclines and apply the brake or accelerator pedal if necessary. 5-111 5 Driving your vehicle • The Smart Cruise Control system may not detect a moving vehicle in your lane, and then your vehicle could accelerate to the set speed. Also, the vehicle speed will decrease when the vehicle ahead is recognized suddenly. • Select the appropriate set speed on curves and apply the brakes or accelerator pedal if necessary. Your vehicle speed can be reduced due to a vehicle in the adjacent lane. Apply the accelerator pedal and select the appropriate set speed. Check to be sure that the road conditions permit safe operation of the Smart Cruise Control. Driving your vehicle Lane changing Detecting vehicles OTM058074 • A vehicle which moves into your lane from an adjacent lane cannot be recognized by the sensor until it is in the sensor's detection range. • The radar may not detect immediately when a vehicle cuts in suddenly. Always pay attention to the traffic, road and driving conditions. • If a slower vehicle moves into your lane, your speed may decrease to maintain the distance to the vehicle ahead. • If a faster vehicle which moves into your lane, your vehicle will accelerate to the set speed. 5-112 OTM058128 Some vehicles in your lane cannot be recognized by the sensor: - Narrow vehicles such as motorcycles or bicycles - Vehicles offset to one side - Slow-moving vehicles or suddendecelerating vehicles - Stopped vehicles - Vehicles with small rear profile such as trailers with no loads A vehicle ahead cannot be recognized correctly by the sensor if any of following occurs: - When the vehicle is pointing upwards due to overloading in the luggage compartment - While the steering wheel is operating - When driving to one side of the lane - When driving on narrow lanes or on curves Apply the brake or accelerator pedal if necessary. OTM058119 OTM058124 • When driving in stop-and-go traffic, and a stopped vehicle in front of you merges out of the lane, the system may not immediately detect the new vehicle that is now in front of you. In this case, you must maintain a safe braking distance, and if necessary, depress the brake pedal to reduce your driving speed in order to maintain a safe distance. • Always look out for pedestrians when your vehicle is maintaining a distance with the vehicle ahead. 5 Driving your vehicle OTM058129 • Your vehicle may accelerate when a vehicle ahead of you disappears. • When you are warned that the vehicle ahead of you is not detected, drive with caution. 5-113 Driving your vehicle WARNING OFE058042 • Always be cautious for vehicles with higher height or vehicles carrying loads that sticks out from the back of the vehicle. 5-114 When using the Smart Cruise Control take the following precautions: • If an emergency stop is necessary, you must apply the brakes. The vehicle cannot be stopped at every emergency situation by using the Smart Cruise Control system. • Keep a safe distance according to road conditions and vehicle speed. If the vehicle to vehicle distance is too close during a high-speed driving, a serious collision may result. • Always maintain sufficient braking distance and decelerate your vehicle by applying the brakes if necessary. • The Smart Cruise Control system cannot recognize a stopped vehicle, pedestrians or an oncoming vehicle. Always look ahead cautiously to prevent unexpected and sudden situations from occurring. • Vehicles moving in front of you with a frequent lane change may cause a delay in the system's reaction or may cause the system to react to a vehicle actually in an adjacent lane. Always drive cautiously to prevent unexpected and sudden situations from occurring. • Always be aware of the selected speed and vehicle to vehicle distance. The driver should not solely rely on the system but always pay attention to driving conditions and control your vehicle speed. • The Smart Cruise Control system may not recognize complex driving situations so always pay attention to driving conditions and control your vehicle speed. • For your safety, please read the owner's manual before using the Smart Cruise Control system. i Information The Smart Cruise Control system may not operate temporarily due to: • Electrical interference • Modifying the suspension • Differences of tire abrasion or tire pressure • Installing different type of tires i Information Radio frequency radiation exposure information: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 8 in. (20 cm) between the radiator (antenna) and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. The radio frequency components (Rear Corner Radar) complies: 5 OANATEL002 OANATEL003 5-115 Driving your vehicle This device complies with Part 15 of the FCC rules. Operation is subject to the following three conditions: 1.This device may not cause harmful interference, and 2.This device must accept any interference received, including interference that may cause undesired operation. 3.Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the device. i Information DECLARATION OF CONFORMITY (IF EQUIPPED) Driving your vehicle LEADING VEHICLE DEPARTURE ALERT (IF EQUIPPED) The Leading Vehicle Departure Alert system alerts the driver of the departure of a detected vehicle in front when the vehicle is stopped and the Smart Cruise Control (SCC) system is in activation. 5-116 System Setting and Activation System setting With the vehicle ON, the Leading Vehicle Departure Alert system turns on and gets ready to be activated when the 'vehicle Settings → Driver Assistance → Driving Assist → Leading vehicle departure alert' is selected selected in the Infotainment system screen display. The system stops operation when the setting is deactivated. However, if the vehicle is turned off then on again, the system maintains the previous state. System standby OTM070114L While the Smart Cruise Control (SCC) system is in operation, your vehicle stops behind the vehicle in front when it stops. The message is displayed on the cluster within 3 seconds after the stop and the system will be in the standby position. System activation WARNING Always check the front of the vehicle and road conditions before departure. OFE051114N 5 Driving your vehicle If the driver does not take action for a certain period of time after the vehicle in front departs, the message is displayed on the cluster. The vehicle departs automatically if the accelerator pedal is depressed or RES + or SET - toggle switch is pushed up or down when there is a vehicle in front. The Smart Cruise Control (SCC) system is deactivated if the accelerator pedal is depressed or RES + or SET - toggle switch is pushed up or down when there is no vehicle in front. 5-117 Driving your vehicle SPECIAL DRIVING CONDITIONS Hazardous Driving Conditions Rocking the Vehicle When hazardous driving elements are encountered such as water, snow, ice, mud and sand, take the bellow suggestions: • Drive cautiously and keep a longer braking distance. • Avoid abrupt braking or steering. • When your vehicle is stuck in snow, mud, or sand, turn off the vehicle. Remove the mud, snow or sand from around the front wheels and restart the vehicle. Accelerate slowly to avoid unnecessary wheel spin. • Put sand, rock salt, tire chains or other non-slip materials under the wheels to provide additional traction while the vehicle becomes stuck in ice, snow, or mud. If it is necessary to rock the vehicle to free it from snow, sand, or mud, first turn the steering wheel right and left to clear the area around your front wheels. Then, shift back and forth between R (Reverse) and a forward gear. Try to avoid spinning the wheels, and do not race the vehicle. To prevent reduction gear wear, wait until the wheels stop spinning before shifting gears. Release the accelerator pedal while shifting, and press lightly on the accelerator pedal while the reduction gear is in gear. Slowly spinning the wheels in forward and reverse directions causes a rocking motion that may free the vehicle. 5-118 WARNING If the vehicle is stuck and excessive wheel spin occurs, the temperature in the tires can increase very quickly. If the tires become damaged, a tire blow out or tire explosion can occur. This condition is dangerous you and others may be injured. Do not attempt this procedure if people or objects are anywhere near the vehicle. If you attempt to free the vehicle, the vehicle can overheat quickly, possibly causing an fuel cell power module compartment fire or other damage. Try to avoid spinning the wheels as much as possible to prevent overheating of either the tires or the vehicle. DO NOT allow the vehicle to spin the wheels above 56 km/h (35 mph). i Information The ESC system (if equipped) must be turned OFF before rocking the vehicle. Driving in the Rain Avoid braking, especially when roads are wet. Ideally, corners should always be taken under gentle acceleration. Rain and wet roads can make driving dangerous. Here are a few things to consider when driving in the rain or on slick pavement: • Slow down and allow extra following distance. A heavy rainfall makes it harder to see and increases the distance needed to stop your vehicle. • Turn OFF your Cruise Control. (if equipped) • Replace your windshield wiper blades when they show signs of streaking or missing areas on the windshield. • Be sure your tires have enough tread. If your tires do not have enough tread, making a quick stop on wet pavement can cause a skid and possibly lead to an accident. See "Tire Tread" in chapter 7. • Turn on your headlights to make it easier for others to see you. • Driving too fast through large puddles can affect your brakes. If you must go through puddles, try to drive through them slowly. NOTICE If you are still stuck after rocking the vehicle a few times, have the vehicle pulled out by a tow vehicle to avoid vehicle overheating, possible damage to the reduction gear and tire damage. See "Towing" in chapter 6. Driving at Night Night driving presents more hazards than driving in the daylight. Here are some important tips to remember: • Slow down and keep more distance between you and other vehicles, as it may be more difficult to see at night, especially in areas where there may not be any street lights. • Adjust your mirrors to reduce the glare from other driver's headlights. • Keep your headlights clean and properly aimed. Dirty or improperly aimed headlights will make it much more difficult to see at night. • Avoid staring directly at the headlights of oncoming vehicles. You could be temporarily blinded, and it will take several seconds for your eyes to readjust to the darkness. 5-119 5 Driving your vehicle Smooth Cornering Driving your vehicle • If you believe your brakes may be wet, apply them lightly while driving until normal braking operation returns. Hydroplaning If the road is wet enough and you are going fast enough, your vehicle may have little or no contact with the road surface and actually ride on the water. The best advice is SLOW DOWN when the road is wet. The risk of hydroplaning increases as the depth of tire tread decreases, refer to "Tire Tread" in chapter 7. Driving in Flooded Areas Avoid driving through flooded areas unless you are sure the water is no higher than the bottom of the wheel hub. Drive through any water slowly. Allow adequate stopping distance because brake performance may be reduced. After driving through water, dry the brakes by gently applying them several times while the vehicle is moving slowly. Highway Driving Tires Adjust the tire inflation, as specified. Under-inflation may overheat or damage the tires. Do not install worn-out or damaged tires, which may reduce traction or fail the braking operation. i Information Never over-inflate your tires above the maximum inflation pressure, as specified on your tires. Coolant and high voltage battery Be sure to check both the coolant level and the high voltage battery level before driving. 5-120 Reducing the Risk of a Rollover Utility vehicles have a significantly higher rollover rate than other types of vehicles. To prevent rollovers or loss of control: • Take corners at slower speeds than you would with a passenger vehicle. • Avoid sharp turns and abrupt maneuvers. • Do not modify your vehicle in any way that you would raise the center of gravity. • Keep tires properly inflated. • Do not carry heavy cargo on the roof. 5 Driving your vehicle Your multi-purpose passenger vehicle is defined as a Sports Utility Vehicle (SUV). SUV's have higher ground clearance and a narrower track to make them capable of performing in a wide variety of off-road applications. The specific design characteristics give them a higher center of gravity than ordinary vehicles making them more likely to roll over if you make abrupt turns. Utility vehicles have a significantly higher rollover rate than other types of vehicles. Due to this risk, driver and passengers are strongly recommended to buckle their seat belts. In a rollover crash, an unbelted person is significantly more likely to die than a person wearing a seat belt. There are steps that a driver can make to reduce the risk of a rollover. If at all possible, avoid sharp turns or abrupt maneuvers, do not load your vehicle with heavy cargo on the roof, and never modify your vehicle in any way. WARNING 5-121 Driving your vehicle WINTER DRIVING The severe weather conditions of winter quickly wear out tires and cause other problems. To minimize winter driving problems, you should take the following suggestions: Snow or Icy Conditions You need to keep sufficient distance between your vehicle and the vehicle in front of you. Apply the brakes gently. Speeding, rapid acceleration, sudden brake applications, and sharp turns are potentially very hazardous practices. During deceleration, use regenerative braking to the fullest extent. Sudden brake applications on snowy or icy roads may cause the vehicle to skid. To drive your vehicle in deep snow, it may be necessary to use snow tires or to install tire chains on your tires. Always carry emergency equipment. Some of the items you may want to carry include tire chains, tow straps or chains, a flashlight, emergency flares, sand, a shovel, jumper cables, a window scraper, gloves, ground cloth, coveralls, a blanket, etc. 5-122 Snow tires Air cleaner filter (FCEV) WARNING Snow tires should be equivalent in size and type to the vehicle's standard tires. Otherwise, the safety and handling of your vehicle may be adversely affected. If you mount snow tires on your vehicle, make sure to use radial tires of the same size and load range as the original tires. Mount snow tires on all four wheels to balance your vehicle’s handling in all weather conditions. The traction provided by snow tires on dry roads may not be as high as your vehicle's original equipment tires. Check with the tire dealer for maximum speed recommendations. i Information Do not install studded tires without first checking local, state and municipal regulations for possible restrictions against their use. The snow may block the air cleaner filter after driving the vehicle in heavy snow when the ambient temperature is below 50°F (10°C). If a warning message "Air filter blocked. Check filter or see user manual" appears on LCD display after turning off the vehicle, remove the snow from the inside of the air cleaner filter and turn on and off the vehicle. If the warning message is displayed again, the exhaust pipe may be blocked. Then, move your vehicle indoors and leave it inside more than one day to defrost the exhaust pipe. If the warning message is displayed again, have the vehicle checked by an authorized HYUNDAI dealer. Tire chains WARNING OFE058102 i Information • Install tire chains only in pairs and on the front tires. It should be noted that installing tire chains on the tires will provide a greater driving force, but will not prevent side skids. • Do not install studded tires without first checking local, state and municipal regulations for possible restrictions against their use. 5-123 5 Driving your vehicle Since the sidewalls of radial tires are thinner than other types of tires, they may be damaged by mounting some types of tire chains on them. Therefore, the use of snow tires is recommended instead of tire chains. Do not mount tire chains on vehicles equipped with aluminum wheels; if possible use a wire type chain. If tire chains must be used, use genuine HYUNDAI parts and install the tire chain after reviewing the instructions provided with the tire chains. Damage to your vehicle caused by improper tire chain use is not covered by your vehicle manufacturer’s warranty. The use of tire chains may adversely affect vehicle handling: • Drive less than 20 mph (30 km/h) or the chain manufacturer's recommended speed limit, whichever is lower. • Drive carefully and avoid bumps, holes, sharp turns, and other road hazards, which may cause the vehicle to bounce. • Avoid sharp turns or locked wheel braking. Chain Installation When installing tire chains, follow the manufacturer's instructions and mount them as tightly possible. Drive slowly (less than 20 mph (30 km/h)) with chains installed. If you hear the chains contacting the body or chassis, stop and tighten them. If they still make contact, slow down until the noise stops. Remove the tire chains as soon as you begin driving on cleared roads. When mounting snow chains, park the vehicle on level ground away from traffic. Turn on the vehicle Hazard Warning Flasher and place a triangular emergency warning device behind the vehicle (if available). Always place the vehicle in P (Park), apply the parking brake and turn off the vehicle before installing snow chains. Driving your vehicle NOTICE When using tire chains: • Wrong size chains or improperly installed chains can damage your vehicle's brake lines, suspension, body and wheels. • Use SAE "S" class or wire chains. • If you hear noise caused by chains contacting the body, retighten the chain to prevent contact with the vehicle body. • To prevent body damage, retighten the chains after driving 0.3~0.6 miles (0.5~1.0 km). • Do not use tire chains on vehicles equipped with aluminum wheels. If unavoidable, use a wire type chain. • Use wire chains less than 0.47 in (12 mm) thick to prevent damage to the chain's connection. 5-124 Winter Precautions Use high quality ethylene glycol coolant Your vehicle is delivered with high quality ethylene glycol coolant in the cooling system. It is the only type of coolant that should be used because it helps prevent corrosion in the cooling system, lubricates the water pump and prevents freezing. Be sure to replace or replenish your coolant in accordance with the maintenance schedule in chapter 7. Before winter, have your coolant tested to assure that its freezing point is sufficient for the temperatures anticipated during the winter. Use approved window washer anti-freeze in system To keep the water in the window washer system from freezing, add an approved window washer anti-freeze solution in accordance with instructions on the container. Window washer anti-freeze is available from an authorized HYUNDAI dealer and most auto parts outlets. Do not use coolant or other types of anti-freeze as these may damage the paint finish. Do not let your parking brake freeze Under some conditions your parking brake can freeze in the engaged position. This is most likely to happen when there is an accumulation of snow or ice around or near the rear brakes or if the brakes are wet. If there is a risk the parking brake may freeze, apply it only temporarily while you shift to P (Park) and block the rear wheels so the car cannot roll. Then release the parking brake. Do not let ice and snow accumulate underneath Under some conditions, snow and ice can build up under the fenders and interfere with the steering. When driving in severe winter conditions where this may happen, you should periodically check underneath the car to be sure the movement of the front wheels and the steering components is not obstructed. To keep locks from freezing To keep the locks from freezing, squirt an approved de-icer fluid or glycerine into the key opening. If a lock is covered with ice, squirt it with an approved de-icing fluid to remove the ice. If the lock is frozen internally, you may be able to thaw it out by using a heated key. Handle the heated key with care to avoid injury. Don't place foreign objects or materials in the fuel cell power module compartment 5 Driving your vehicle Placement of foreign object or materials which prevent cooling of the vehicle, in the fuel cell power module compartment, may cause a failure. The manufacturer is not responsible for the damage caused by such placement. 5-125 Driving your vehicle VEHICLE LOAD LIMIT Two labels on your driver's door sill show how much weight your vehicle was designed to carry: the Tire and Loading Information Label and the Certification Label. Before loading your vehicle, familiarize yourself with the following terms for determining your vehicle's weight ratings, from the vehicle's specifications and the Certification Label: Base Curb Weight This is the weight of the vehicle including a full tank of fuel and all standard equipment. It does not include passengers, cargo, or optional equipment. Vehicle Curb Weight This is the weight of your new vehicle when you picked it up from your dealer plus any aftermarket equipment. Cargo Weight This figure includes all weight added to the Base Curb Weight, including cargo and optional equipment. 5-126 GAW (Gross Axle Weight) This is the total weight placed on each axle (front and rear) - including vehicle curb weight and all payload. Tire Loading Information Label GAWR (Gross Axle Weight Rating) This is the maximum allowable weight that can be carried by a single axle (front or rear). These numbers are shown on the Certification Label. The total load on each axle must never exceed its GAWR. OFE068027N GVW (Gross Vehicle Weight) This is the Base Curb Weight plus actual Cargo Weight plus passengers. GVWR (Gross Vehicle Weight Rating) This is the maximum allowable weight of the fully loaded vehicle (including all options, equipment, passengers and cargo). The GVWR is shown on the Certification Label located on the driver’s door sill. OFE068028N The label located on the driver's door sill gives the original tire size, cold tire pressures recommended for your vehicle, the number of people that can be in your vehicle and vehicle capacity weight. Vehicle capacity weight 903 lbs. (410 kg) Vehicle capacity weight is the maximum combined weight of occupants and cargo. If your vehicle is equipped with a trailer, the combined weight includes the tongue load. Seating capacity Total : 5 persons (Front seat : 2 persons, Rear seat : 3 persons) Seating capacity is the maximum number of occupants including a driver, your vehicle may carry. However, the seating capacity may be reduced based upon the weight of all of the occupants, and the weight of the cargo being carried or towed. Do not overload the vehicle as there is a limit to the total weight, or load limit including occupants and cargo, the vehicle can carry. We do not recommend using this vehicle for trailer towing. Cargo capacity The cargo capacity of your vehicle will increase or decrease depending on the weight and the number of occupants and the tongue load, if your vehicle is equipped with a trailer. 1. Locate the statement "The combined weight of occupants and cargo should never exceed XXX kg or XXX lbs." on your vehicle's placard. 2. Determine the combined weight of the driver and passengers that will be riding in your vehicle. 3. Subtract the combined weight of the driver and passengers from XXX kg or XXX lbs. 4. The resulting figure equals the available amount of cargo and luggage load capacity. For example, if the "XXX" amount equals 1400 lbs. and there will be five 150 lb passengers in your vehicle, the amount of available cargo and luggage load capacity is 650 lbs. (1400 - 750 (5 x 150) = 650 lbs.) 5. Determine the combined weight of luggage and cargo being loaded on the vehicle. That weight may not safely exceed the available cargo and luggage load capacity calculated in Step 4. 5-127 5 Driving your vehicle Towing capacity Steps for determining correct load limit Driving your vehicle 6. If your vehicle will be towing a trailer, load from your trailer will be transferred to your vehicle. Consult this manual to determine how this reduces the available cargo and luggage load capacity of your vehicle. WARNING Do not overload the vehicle as there is a limit to the total weight, or load limit, including occupants and cargo, the vehicle can carry. Overloading can shorten the life of the vehicle. If the GVWR or the GAWR is exceeded, parts on the vehicle can be broken, and it can change the handling of your vehicle. These could cause you to lose control and result in an accident. 5-128 Example 1 ≥ Maximum Load (1400 lbs.) (635 kg) + Cargo Weight (1100 lbs.) (499 kg) Passenger Weight (150 lbs. × 2 = 300 lbs.) (68 kg × 2 = 136 kg) Example 2 ≥ 5 Cargo Weight (650 lbs.) (295 kg) Passenger Weight (150 lbs. × 5 = 750 lbs.) (68 kg × 5 = 340 kg) Driving your vehicle Maximum Load (1400 lbs.) (635 kg) + Example 3 ≥ Maximum Load (1400 lbs.) (635 kg) + Passenger Weight (172 lbs. × 5 = 860 lbs.) (78 kg × 5 = 390 kg) Cargo Weight (540 lbs.) (245 kg) 5-129 Driving your vehicle Certification label The total weight of the vehicle, including all occupants, accessories, cargo, and trailer tongue load must not exceed the Gross Vehicle Weight Rating (GVWR) or the Gross Axle Weight Rating (GAWR). To find out the actual loads on your front and rear axles, you need to go to a weigh station and weigh your vehicle. Be sure to spread out your load equally on both sides of the centerline. OBH059070 The certification label is located on the driver’s door sill at the center pillar and shows the maximum allowable weight of the fully loaded vehicle. This is called the GVWR (Gross Vehicle Weight Rating). The GVWR includes the weight of the vehicle, all occupants, fuel and cargo. This label also tells you the maximum weight that can be supported by the front and rear axles, called Gross Axle Weight Rating (GAWR). 5-130 WARNING Overloading • Never exceed the GVWR for your vehicle, the GAWR for either the front or rear axle and vehicle capacity weight. Exceeding these ratings can affect your vehicle’s handling and braking ability, and cause an accident. • Do not overload your vehicle. Overloading your vehicle can cause heat buildup in your vehicle’s tires and possible tire failure, increased stopping distances and poor vehicle handling-all of which may result in a crash. TRAILER TOWING NOTICE Overloading your vehicle may cause damage. Repairs would not be covered by your warranty. Do not overload your vehicle. WARNING We do not recommend using this vehicle for trailer towing. If you carry items inside your vehicle (for example, suitcases, tools, packages, or anything else), they are moving as fast as the vehicle. If you have to stop or turn quickly, or if there is a crash, the items will keep going and can cause an injury if they strike the driver or a passenger. • Put items in the cargo area of your vehicle. Try to spread the weight evenly. • Do not stack items like suitcases inside the vehicle above the tops of the seats. • Do not leave an unsecured child restraint in your vehicle. • When you carry something inside the vehicle, secure it. 5 Driving your vehicle 5-131 What to do in an emergency Hazard Warning Flasher .......................................6-2 In Case of an Emergency While Driving.............6-2 If an accident occurs........................................................6-2 If a fire occurs ...................................................................6-3 Emergency venting of hydrogen gas...........................6-3 If a submersion in water occurs....................................6-3 If the vehicle stalls at a crossroad or crossing.........6-3 If you have a flat tire while driving..............................6-4 If the vehicle stalls while driving...................................6-4 If You Have a Flat Tire (With Tire Mobility Kit).......................................6-17 Towing ...................................................................6-24 Towing Service.................................................................6-24 Removable Towing Hook ...............................................6-25 Emergency Towing..........................................................6-26 If the Vehicle Will Not Start .................................6-4 If the 12 Volt Battery is Discharged ...................6-5 Before Jump Starting .......................................................6-5 Jump Starting......................................................................6-6 If the Vehicle Overheats .......................................6-9 Tire Pressure Monitoring System (TPMS).......6-11 Check Tire Pressure .......................................................6-11 Tire Pressure Monitoring System...............................6-12 Low Tire Pressure Telltale ............................................6-13 Low Tire Pressure LCD Display with Position Indicator.............................................................................6-13 TPMS Malfunction Indicator ........................................6-14 Changing a Tire with TPMS..........................................6-15 6 What to do in an emergency HAZARD WARNING FLASHER To turn the hazard warning flasher on or off, press the hazard warning flasher button. The button is located in the center fascia panel. Both the left and right turn signal lights will flash simultaneously. • The hazard warning flasher operates whether your vehicle is running or not. • The turn signals do not work when the hazard flasher is on. OFE068001 The hazard warning flasher serves as a warning to other drivers to exercise extreme caution when approaching, overtaking, or passing your vehicle. It should be used whenever emergency repairs are being made or when the vehicle is stopped near the edge of a roadway. 6-2 IN CASE OF AN EMERGENCY WHILE DRIVING If an accident occurs 1. Stop the vehicle, shift gear to the P (Park) position, engage the parking brake, and turn the vehicle off. The flow of hydrogen into the fuel cell stack will be shut off to prevent the electricity from being generated. 2. Evacuate to the safety place. 3. Call emergency services for help and let them know the vehicle is a Fuel Cell Electric Vehicle. If a fire occurs WARNING Do not use water to extinguish a fire when the vehicle power is turned on. Serious electric shock may result. Emergency venting of hydrogen gas If the temperature near the safety valve located at the rear under vehicle is over 230°F (110°C) caused by a fire or other reasons, the safety valve will open to vent hydrogen gas. Venting the hydrogen gas makes a loud noise because the venting speed is very fast. Stay well away from the vehicle. The discharge of hydrogen gas from the vehicle is flammable and could cause a fire. If a submersion in water occurs If your vehicle was flooded and has soaked carpeting or water on the flooring, you should not try to start the vehicle by pressing the POWER button. Contact an authorized HYUNDAI dealer immediately. If the vehicle stalls at a crossroad or crossing If the vehicle stalls at a crossroad or crossing, set the gear in the N (Neutral) position and then push the vehicle to a safe place. 6-3 What to do in an emergency 1. Stop the vehicle, shift gear to the P(Park) position, engage the parking brake, and turn the vehicle off. The flow of hydrogen into the fuel cell stack will be shut off to prevent the electricity from being generated. 2. If the fire is small, which can be extinguished with fire extinguisher, use carbon dioxide extinguisher. You can also extinguish the fire with water when the vehicle power is turned off. If the fire is too big to be extinguished with the fire extinguisher, evacuate from the vehicle, call the fire department, and let them know the vehicle is a Fuel Cell Electric Vehicle. Do not come close to the vehicle until the fire is totally extinguished. 6 What to do in an emergency If you have a flat tire while driving If the vehicle stalls while driving If a tire goes flat while you are driving: 1. Take your foot off the accelerator pedal and let the vehicle slow down while driving straight ahead. Do not apply the brakes immediately or attempt to pull off the road as this may cause a loss of control. When the vehicle has slowed to such a speed that it is safe to do so, brake carefully and pull off the road. Drive off the road as far as possible and park on firm, level ground. If you are on a divided highway, do not park in the median area between the two traffic lanes. 2. When the vehicle is stopped, turn on your emergency hazard flashers, set the parking brake and shift gear to the P(Park) position. 3. Have all passengers get out of the vehicle. Be sure they all get out on the side of the vehicle that is away from traffic. 1. Reduce your speed gradually, keeping a straight line. Move cautiously off the road to a safe place. 2. Turn on your emergency flashers. 3. Try to start the vehicle again. If your vehicle will not start, contact an authorized HYUNDAI dealer. 6-4 IF THE VEHICLE WILL NOT START • Be sure the shift lever is in P (Park). The vehicle starts only when the shift lever is in P (Park). • This vehicle does not have a regular 12V battery that needs periodic replacement. It is lithium ion polymer type integrated into the high voltage battery. The vehicle has a 12V battery protection system that cuts 12V battery from vehicle draw to prevent full discharge. If vehicle will not start, first try pressing the 12V Battery Reset switch (left side of the steering wheel near the fuel door open switch) to reconnect the 12V battery, but you must start vehicle within 15 seconds of pressing the 12V Battery Reset switch. After starting vehicle, operate the vehicle safely outdoors in ready mode stopped and/or drive it for 30 minutes total to charge the 12V battery fully. • Check the fuel level and add fuel if necessary. • Do not push or pull the vehicle to start it. If the vehicle still does not start, call an authorized HYUNDAI dealer for assistance. IF THE 12 VOLT BATTERY IS DISCHARGED Before Jump Starting OFEQ019028L 1. Press the 12V Battery Reset switch to reconnect the 12V battery. 2. Start the vehicle within 15 seconds of pressing the 12V Battery Reset switch. 3. After starting vehicle ( indicator on), move the vehicle outside and keep the vehicle ready ( ) mode more than 30 minutes safely to charge the 12V battery. If you do not start the vehicle immediately after pressing the 12V Battery Reset switch, the power of 12V battery is automatically disconnected after few seconds to save the 12V battery from additional discharge. If the 12V battery is disconnected prior to starting the vehicle, press the 12V Battery Reset switch again and then immediately start the vehicle as explained. Repeated use of the 12V Battery Reset switch without a sufficient vehicle ON cycle (30 Min+) may cause over discharge of the 12V battery, which will prevent the vehicle from starting. If the 12V battery is over discharged to a point that the reset does not work, try to jump-start the vehicle. i Information After starting the vehicle ( indicator on), the 12V battery is being charged whether the accelerator pedal is depressed or not. 6-5 What to do in an emergency This vehicle does not have a regular 12V battery that needs periodic replacement. It is lithium ion polymer type integrated into the high voltage battery. The vehicle has a 12V battery protection system that cuts 12V battery from vehicle draw to prevent full discharge. Using the 12V Battery Reset Switch 6 What to do in an emergency The following items may need to be reset after the battery has been discharged or the battery has been disconnected. See chapter 3 or 4 for: • Power Windows • Trip Computer • Climate Control System • Clock • Audio System • Sunroof • Driver Position Memory System NOTICE External power source using 12V battery The use of external power accessories may reduce performance and function of the vehicle. Especially, the use of dash cameras may shut off the power of the vehicle prior to the dash camera's automatic shut-down. If the power of the vehicle is shut off, start the vehicle as explained. (refer to "Using the 12V Battery Switch") 6-6 Jump Starting In the event vehicle still does not have a functional 12V battery (check if interior lights will not turn on) then you can try a jump start using a 12V booster pack or jumper cables from another vehicle's 12V battery according to the following instructions. CAUTION Jump starting can be dangerous if done incorrectly. Follow the jump starting procedure in this section to avoid serious injury or damage to your vehicle. If in doubt about how to properly jump start your vehicle, we strongly recommend that you have a service technician or towing service do it for you. 1. Position the vehicles close enough that the jumper cables will reach, but do not allow the vehicles to touch. 2. Avoid fans or any moving parts in the fuel cell power module compartment at all times, even when the vehicles are turned off. 3. Turn off all electrical devices such as radios, lights, air conditioning, etc. Put the vehicles in P (Park) and set the parking brake. Turn both vehicles OFF. CAUTION Before jump starting, make sure to correctly identify the positive (+) and negative (-) terminals to avoid reverse polarity connections. WARNING OFE068003N 4. Connect the jumper cables in the exact sequence shown in the illustration. First connect one jumper cable to the red, positive (+) jumper terminal of your vehicle (1). 5. Connect the other end of the jumper cable to the red, positive (+) battery/jumper terminal of the assisting vehicle (2). Do not connect the jumper cable to the negative (-) jumper terminal of the discharged battery. A spark could cause the battery to explode and lead to a personal injury or vehicle damage. OFEQ019028L 8. Press the 12V Battery Reset switch. 9. Start the engine of the assisting vehicle and let it run for a few minutes. 10. Start your vehicle as soon as possible. After starting vehicle ( indicator on), operate the vehicle safely outdoors in ready mode stopped and/or drive it for 30 minutes total to charge the 12V battery fully. 6-7 What to do in an emergency 6. Connect the second jumper cable to the black, negative (-) battery/jumper terminal of the assisting vehicle (3). 7. Connect the other end of the second jumper cable to the black, negative (-) chassis ground of your vehicle (4). Do not allow the jumper cables to contact anything except the correct battery or jumper terminals or the correct ground. Do not lean over the battery when making connections. 6 What to do in an emergency If your vehicle will not start after a few attempts, it probably requires servicing. In this event please seek qualified assistance. If the cause of your battery discharging is not apparent, have your vehicle checked by an authorized HYUNDAI dealer. i Information The voltage range of the charger should be 13.3~14V and its current range should be less than 60A. (13.8V is recommended). CAUTION Disconnect the jumper cables in the exact reverse order you connected them: 1. Disconnect the jumper cable from the black, negative (-) chassis ground of your vehicle (4). 2. Disconnect the other end of the jumper cable from the black, negative (-) battery/chassis ground of the assisting vehicle (3). 3. Disconnect the second jumper cable from the red, positive (+) battery/jumper terminal of the assisting vehicle (2). 4. Disconnect the other end of the jumper cable from the red, positive (+) jumper terminal of your vehicle (1). 6-8 • The use of an improper charger with a voltage and current range higher than specified may cause overheating and damage to the 12V battery. • The use of an incorrect charger will lead to a power shut-off to save the 12V battery. Stop using the incorrect charger once the power of the vehicle is shut off. NOTICE To prevent damage to your vehicle: • Only use a 12-volt power supply (battery or jumper system) to jump start your vehicle. • Do not attempt to jump start your vehicle by push-starting. CAUTION Do not jump start another vehicle with your hybrid vehicle. Jump starting another vehicle will damage the hybrid vehicle’s 12 volt battery (lithium polymer type). WARNING i Information Pb An inappropriately disposed battery can be harmful to the environment and human health. Dispose of the battery according to your local law(s) or regulations. While jump starting your vehicle, avoid the positive (+) and negative (-) cables to come in contact. A spark could cause personal injury. IF THE VEHICLE OVERHEATS WARNING While the vehicle is running, keep hands, clothing and tools away from the moving parts such as the cooling fan to prevent serious injury. 4. Check for coolant leaking from the radiator, hoses or under the vehicle. (If the air conditioning had been in use, it is normal for cold water to be draining from it when you stop.) 5. If coolant is leaking out, stop the vehicle immediately and call the nearest authorized HYUNDAI dealer for assistance. WARNING Your vehicle is equipped with a pressurized coolant reserve tank. NEVER remove the coolant reserve tank cap or the radiator drain plug while the radiator is HOT. Hot coolant and steam may blow out under pressure, causing serious injury. Turn the vehicle off and wait until the vehicle cools down. Use extreme care when removing the coolant reserve tank cap. Wrap a towel or thick rag around it, and turn it counterclockwise slowly to release some of the pressure from the system. Step back while the pressure is released. When you are sure all the pressure has been released, continue turning the cap counterclockwise to remove it. 6-9 What to do in an emergency 1. Pull off the road and stop as soon as it is safe to do so. 2. Shift to P (Park) and set the parking brake. If the air conditioning is on, turn it off. 3. If coolant is running out under the vehicle or steam is coming out from the hood, stop the vehicle. Do not open the hood until the coolant has stopped running or the steaming has stopped. If there is no visible loss of coolant and no steam, leave the vehicle running and check to be sure the vehicle cooling fan is operating. If the fan is not running, turn the vehicle off. 6 What to do in an emergency 6. If you cannot find the cause of the overheating, wait until the radiator temperature has returned to normal. Then, if coolant has been lost, carefully add coolant to the reservoir to bring the fluid level in the reservoir up to the halfway mark. 7. Proceed with caution, keeping alert for further signs of overheating. If overheating happens again, call an authorized HYUNDAI dealer for assistance. CAUTION Serious loss of coolant indicates a leak in the cooling system and should be checked as soon as possible by an authorized HYUNDAI dealer. 6-10 TIRE PRESSURE MONITORING SYSTEM (TPMS) Check Tire Pressure OFE068004 OFE041121N OFE061021N (1) Low Tire Pressure / TPMS Malfunction Indicator Lamp (2) Low Tire Pressure / Tire Pressure Monitor / TPMS Malfunction Display (shown on the cluster LCD display) • You can check the tire pressure in the information mode on the cluster. Refer to the "LCD Display Mode" section in chapter 3. • A "Drive to display" message will appear for the first few minutes of driving after initial vehicle start up. If the tire pressure is not displayed after a few minutes of driving, check the tire pressures. What to do in an emergency • The displayed tire pressure values may differ from those measured with a tire pressure gage. • You can change the tire pressure unit in the General Settings mode on the Infotainment system. - psi, kpa, bar (For more details, refer to the separately supplied Navigation manual.) 6 6-11 What to do in an emergency Tire Pressure Monitoring System WARNING Over-inflation or under-inflation can reduce tire life, adversely affect vehicle handling, and lead to sudden tire failure that may cause loss of vehicle control resulting in an accident. Each tire, including the spare (if provided), should be checked monthly when cold and inflated to the inflation pressure recommended by the vehicle manufacturer on the vehicle placard or tire inflation pressure label. If your vehicle has tires of a different size than the size indicated on the vehicle placard or tire inflation pressure label, you should determine the proper tire inflation pressure for those tires. 6-12 As an added safety feature, your vehicle has been equipped with a tire pressure monitoring system (TPMS) that illuminates a low tire pressure telltale when one or more of your tires is significantly under-inflated. Accordingly, when the low tire pressure telltale illuminates, you should stop and check your tires as soon as possible, and inflate them to the proper pressure. Driving on a significantly under-inflated tire causes the tire to overheat and can lead to tire failure. Under-inflation also reduces fuel efficiency and tire tread life, and may affect the vehicle's handling and stopping ability. Please note that the TPMS is not a substitute for proper tire maintenance, and it is the driver's responsibility to maintain correct tire pressure, even if under-inflation has not reached the level to trigger illumination of the TPMS low tire pressure telltale. Your vehicle has also been equipped with a TPMS malfunction indicator to indicate when the system is not operating properly. The TPMS malfunction indicator is combined with the low tire pressure telltale. When the system detects a malfunction, the telltale will flash for approximately one minute and then remain continuously illuminated. This sequence will continue upon subsequent vehicle start-ups as long as the malfunction exists. When the malfunction indicator is illuminated, the system may not be able to detect or signal low tire pressure as intended. TPMS malfunctions may occur for a variety of reasons, including the installation of replacement or alternate tires or wheels on the vehicle that prevent the TPMS from functioning properly. Always check the TPMS malfunction telltale after replacing one or more tires or wheels on your vehicle to ensure that the replacement or alternate tires and wheels allow the TPMS to continue to function properly. NOTICE Low Tire Pressure LCD Display with Position Indicator OFE041115N When the tire pressure monitoring system warning indicators are illuminated and the warning message is displayed on the cluster LCD display, one or more of your tires is significantly under-inflated. The LCD position indicator will indicate which tire is significantly under-inflated by illuminating the corresponding position light. If any of your tire pressures are indicated as being low, immediately reduce your speed, avoid hard cornering, and anticipate increased stopping distances. You should stop and check your tires as soon as possible. Inflate the tires to the proper pressure as indicated on the vehicle’s placard or tire inflation pressure label located on the driver's side center pillar outer panel. The Low Tire Pressure LCD position indicator will remain on and the TPMS Malfunction Indicator may blink for one minute and then remain illuminated until you have the low pressure tire repaired and replaced on the vehicle. 6-13 What to do in an emergency If any of the below happens, have the system checked by an authorized HYUNDAI dealer. 1. The Low Tire Pressure TPMS Malfunction Indicator does not illuminate for 3 seconds when the POWER button is placed to the ON position or vehicle is ON ( indicator ON). 2. The TPMS Malfunction Indicator remains illuminated after blinking for approximately 1 minute. 3. The Low Tire Pressure LCD display remains illuminated Low Tire Pressure Telltale 6 What to do in an emergency CAUTION In winter or cold weather, the Low Tire Pressure Telltale may be illuminated if the tire pressure was adjusted to the recommended tire inflation pressure in warm weather. It does not mean your TPMS is malfunctioning because the decreased temperature leads to a proportional lowering of tire pressure. When you drive your vehicle from a warm area to a cold area or from a cold area to a warm area, or the outside temperature is greatly higher or lower, you should check the tire inflation pressure and adjust the tires to the recommended tire inflation pressure. 6-14 TPMS Malfunction Indicator WARNING Low pressure damage Significantly low tire pressure makes the vehicle unstable and can contribute to loss of vehicle control and increased braking distances. Continued driving on low pressure tires can cause the tires to overheat and fail. The TPMS Malfunction Indicator will illuminate after it blinks for approximately one minute when there is a problem with the Tire Pressure Monitoring System. Have the system checked by an authorized HYUNDAI dealer as soon as possible. NOTICE If there is a malfunction with the TPMS, the individual tire pressures in the cluster LCD display will not be available. Have the system checked by an authorized HYUNDAI dealer as soon as possible. NOTICE If you have a flat tire, the Low Tire Pressure and LCD position indicator will come on. Have the flat tire repaired by an authorized HYUNDAI dealer as soon as possible. CAUTION If the indicators do not disappear after a few minutes, please visit an authorized HYUNDAI dealer. Each wheel is equipped with a tire pressure sensor mounted inside the tire behind the valve stem. You must use TPMS specific wheels. It is recommended that you always have your tires serviced by an authorized HYUNDAI dealer. Never use a puncture-repairing agent not approved by HYUNDAI dealer to repair and/or inflate a low pressure tire. Tire sealant not approved by HYUNDAI dealer may damage the tire pressure sensor. What to do in an emergency The TPMS Malfunction Indicator may illuminate after blinking for one minute if the vehicle is near electric power supply cables or radio transmitters such as police stations, government and public offices, broadcasting stations, military installations, airports, transmitting towers, etc. Additionally, the TPMS Malfunction Indicator may illuminate if snow chains are used or electronic devices such as computers, chargers, remote starters, navigation, etc. This may interfere with normal operation of the TPMS. Changing a Tire with TPMS 6 Once the original tire equipped with a tire pressure monitoring sensor is reinflated to the recommended pressure and reinstalled on the vehicle, the Low Tire Pressure LCD position indicator and TPMS Malfunction Indicator will go off within a few minutes of driving. 6-15 What to do in an emergency You may not be able identify a tire with low pressure by simply looking at it. Always use a good quality tire pressure gage to measure the tire's inflation pressure. Please note that a tire that is hot (from being driven) will have a higher pressure measurement than a tire that is cold. A cold tire means the vehicle has been sitting for 3 hours and driven for less than 1 mile (1.6 km) in that 3 hour period. Allow the tire to cool before measuring the inflation pressure. Always be sure the tire is cold before inflating to the recommended pressure. WARNING • The TPMS cannot alert you to severe and sudden tire damage caused by external factors such as nails or road debris. • If you feel any vehicle instability, immediately take your foot off the accelerator, apply the brakes gradually with light force, and slowly move to a safe position off the road. WARNING Tampering with, modifying, or disabling the Tire Pressure Monitoring System (TPMS) components may interfere with the system's ability to warn the driver of low tire pressure conditions and/or TPMS malfunctions. Tampering with, modifying, or disabling the Tire Pressure Monitoring System (TPMS) components may void the warranty for that portion of the vehicle. 6-16 i Information This device complies with Part 15 of the FCC rules. Operation is subject to the following three conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. 3. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. IF YOU HAVE A FLAT TIRE (WITH TIRE MOBILITY KIT) The Tire Mobility Kit is a temporary fix to the tire and the tire should be inspected by an authorized HYUNDAI dealer as soon as possible. OFE068014 For safe operation, carefully read and follow the instructions in this manual before use. (1) Compressor (2) Sealant bottle When two or more tires are flat, do not use the tire mobility kit because the sealant provided with the Tire Mobility Kit must be used for only one flat tire. Have your tire repaired as soon as possible. The tire may lose air pressure at any time after inflating with the Tire Mobility Kit. WARNING What to do in an emergency CAUTION WARNING 6 Do not use the Tire Mobility Kit to repair punctures in the tire walls. This can result in an accident due to tire failure. 6-17 What to do in an emergency Introduction With the Tire Mobility Kit you stay mobile even after experiencing a tire puncture. The compressor and sealing compound system effectively and comfortably seals most punctures in a passenger car tire caused by nails or similar objects and reinflates the tire. After you ensure that the tire is properly sealed you can drive cautiously on the tire (distance up to 120 miles (200 km)) at a max. speed of (50 mph (80 km/h)) in order to reach a service station or tire dealer for the tire replacement. It is possible that some tires, especially with larger punctures or damage to the sidewall, cannot be sealed completely. Air pressure loss in the tire may adversely affect tire performance. For this reason, you should avoid abrupt steering or other driving maneuvers, especially if the vehicle is heavily loaded or if a trailer is in use. 6-18 The Tire Mobility Kit is not designed or intended as a permanent tire repair method and is to be used for one tire only. This instruction shows you step by step how to temporarily seal the puncture simply and reliably. Read the section "Notes on the safe use of the Tire Mobility Kit". Notes on the safe use of the Tire Mobility Kit • Park your car at the side of the road so that you can work with the Tire Mobility Kit away from moving traffic. • To be sure your vehicle will not move, even when you're on fairly level ground, always set your parking brake. • Only use the Tire Mobility Kit for sealing/inflation passenger car tires. Only punctured areas located within the tread region of the tire can be sealed using the tire mobility kit. • Do not use on motorcycles, bicycles or any other type of tires. • When the tire and wheel are damaged, do not use Tire Mobility Kit for your safety. • Use of the Tire Mobility Kit may not be effective for tire damage larger than approximately 0.16 in. (4 mm). Please contact the nearest HYUNDAI dealership if the tire cannot be made roadworthy with the Tire Mobility Kit. • Do not use the Tire Mobility Kit if a tire is severely damaged by driving run flat or with insufficient air pressure. • Do not remove any foreign objects such as nails or screws that have penetrated the tire. • Provided the car is outdoors, leave the vehicle ON ( indicator ON). Otherwise operating the compressor may eventually drain the car battery. • Never leave the Tire Mobility Kit unattended while it is being used. • Do not leave the compressor running for more than 10 minutes at a time or it may overheat. Components of the Tire Mobility Kit What to do in an emergency • Do not use the Tire Mobility Kit if the ambient temperature is below -22°F (-30°C). • In case of skin contact with thesealant, wash the area thoroughlywith plenty of water. If the irritationpersists, seek medical attention. • In case of eye contact with the sealant,flush your eyes for at least 15 minutes. If the irritation persists, seek medical attention. • In case of swallowing the sealant,rinse the mouth and drink plenty ofwater. However, never give anythingto an unconscious person and seek medical attention immediately. • Long time exposure to the sealantmay cause damage to bodily tissue such as kidney, etc. 6 ODE067044 1. Speed restriction label 2. Sealant bottle and label with speed restriction 3. Sealant/Air filling hose 4. Connectors and cable for power outlet direct connection 5. 6. 7. 8. Holder for the sealant bottle Compressor ON/OFF switch Pressure gauge for displaying the tire inflation pressure 9. Button for reducing tire inflation pressure 6-19 What to do in an emergency Connectors, cable and connection hose are stored in the compressor housing. Using the Tire Mobility Kit CAUTION Strictly follow the specified sequence, otherwise the sealant may escape under high pressure. WARNING Do not use the tire sealant after the sealant has expired (for example, pasted the expiration date on the sealant container). This can increase the risk of tire failure. WARNING • Keep out of reach of children. • Avoid contact with eyes. • Do not swallow. ONE1081031 OFE068010 Detach the speed restriction label (1) from the sealant bottle (2), and place it in a highly visible place inside the vehicle such as on the steering wheel to remind the driver not to drive too fast. 1. Shake the sealant bottle (2). 6-20 2. Connect the filling hose (3) to the sealant bottle (2) in the direction of (A) and connect the sealant bottle to the compressor (6) in the direction of (B). 3. Ensure that the compressor is switched OFF. CAUTION OFE068015 OFE068016 4. Unscrew the valve cap from the valve of the defective wheel and screw the filling hose (3) of the sealant bottle onto the valve. 5. Plug the compressor power cord (4) into the vehicle power outlet. 6. With the vehicle ON ( indicator ON), switch on the compressor and let it run for approximately 5~7 minutes to fill the sealant up to proper pressure. (refer to the Tire and Wheels, chapter 8). The inflation pressure of the tire after filling is unimportant and will be checked/corrected later. Be careful not to overinflate the tire and stay away from the tire when filling it. CAUTION Securely install the sealant filling hose to the valve. If not, sealant may flow backward, possibly clogging the filling hose. 7. Switch off the compressor. 8. Detach the hoses from the sealant bottle connector and from the tire valve. Return the Tire Mobility Kit to its storage location in the vehicle. What to do in an emergency Do not attempt to drive your vehicle if the tire pressure is below 29 psi (200 kpa). This could result in an accident due to sudden tire failure. 6 6-21 What to do in an emergency 10. After driving approximately 4~6 miles (7~10 km or about 10 minutes), stop at a safe location. OLMF064106 OFE068015 Distributing the sealant 9. Immediately drive approximately 4~6 miles (7~10 km or about 10 minutes) to evenly distribute the sealant in the tire. Do not exceed a speed of 50 mph (80 km/h). If possible, do not fall below a speed of 12 mph (20 km/h). While driving, if you experience any unusual vibration, ride disturbance or noise, reduce your speed and drive with caution until you can safely pull off of the side of the road. 11. Connect the other end of the filling hose (3) directly into the tire valve. 12. Plug the compressor power cord into the vehicle power outlet. 6-22 OAEPH067042 - To increase the inflation pressure: Switch on the compressor. To check the current inflation pressure setting, briefly switch off the compressor. - To reduce the inflation pressure: Press the button (9) on the compressor. i Information The pressure gauge may show higher than actual reading when the compressor is running. To get an accurate tire pressure, the compressor needs to be turned off. CAUTION When you use the Tire Mobility Kit including sealant not approved by HYUNDAI, the tire pressure sensors may be damaged by sealant. The sealant on the tire pressure sensor and wheel should be removed when you replace the tire with a new one and inspect the tire pressure sensors at an authorized dealer. i Information When reinstalling the repaired or replaced tire and wheel on the vehicle, tighten the wheel lug nut to 79~94 lbf·ft (11~13 kgf·m). WARNING What to do in an emergency 13. Adjust the tire inflation pressure to the recommended tire inflation. With the vehicle ON ( indicator ON), on, proceed as follows. 6 The tire inflation pressure must be at least 32 psi (220 kPa). If it is not, do not continue driving. Call for road side service or towing. 6-23 What to do in an emergency TOWING It is acceptable to tow the vehicle with the rear wheels on the ground (without dollies) and the front wheels off the ground. If any of the loaded wheels or suspension components are damaged or the vehicle is being towed with the front wheels on the ground, use a towing dolly under the front wheels. When being towed by a commercial tow truck and wheel dollies are not used, the front of the vehicle should always be lifted, not the rear. Towing Service NOTICE • Do not tow the vehicle with the front wheels on the ground as this may cause damage to the vehicle. OFE068026 • Do not tow with sling-type equipment. Use a wheel lift or flatbed equipment. OFE068017N [A] : Dollies If emergency towing is necessary, have it done by an authorized HYUNDAI dealer or a commercial tow-truck service. Proper lifting and towing procedures are necessary to prevent damage to the vehicle. The use of wheel dollies or flatbed is recommended. 6-24 OFE068025 WARNING When towing your vehicle in an emergency without wheel dollies: 1. Place the POWER button in the ACC position. 2. Place the shift button in N (Neutral). 3. Release the parking brake. 1. Open the liftgate, and remove the towing hook from the tool case. ■ Front 2. Remove the hole cover by pressing the lower part of the cover on the front or rear bumper. 3. Install the towing hook by turning it clockwise into the hole until it is fully secured. 4. Remove the towing hook and install the cover after use. OFE068018 ■ Rear 6 CAUTION Failure to place the shift button in N (Neutral) when being towed with the front wheels on the ground can cause internal damage to the vehicle. What to do in an emergency If your vehicle is equipped with a rollover sensor, place the POWER button in the LOCK/ OFF or ACC position when the vehicle is being towed. The side impact and curtain air bag may deploy if the sensor detects the situation as a rollover. Removable Towing Hook OFE068019 6-25 What to do in an emergency Emergency Towing ■ Front OFE068018 ■ Rear OFE068019 If towing is necessary, have it done by an authorized HYUNDAI dealer or a commercial tow truck service. 6-26 If towing service is not available in an emergency, your vehicle may be temporarily towed using a cable or chain secured to the emergency towing hook at the front (or rear) of the vehicle. Use extreme caution when towing the vehicle with a cable or chain. A driver must be in the vehicle to steer it and operate the brakes. Towing in this manner may be done only on hard-surfaced roads for a short distance and at low speeds. Also, the wheels, axles, power train, steering and brakes must all be in good condition. Always follow these emergency towing precautions: • While depressing the brake pedal shift to the N (Neutral) position and turn the vehicle off. The POWER button will be in the ACC position. • Release the parking brake. • Depress the brake pedal with more force than normal since you will have reduced braking performance. • More steering effort will be required because the power steering system will be disabled. • Use a vehicle heavier than your own to tow your vehicle. • The drivers of both vehicles should communicate with each other frequently. • Before emergency towing, check that the hook is not broken or damaged. • Fasten the towing cable or chain securely to the hook. • Do not jerk the hook. Apply steady and even force. NOTICE CAUTION NOTICE OFE068022 • Use a towing cable or chain less than 16 feet (5 m) long. Attach a white or red cloth (about 12 inch (30 cm) wide) in the middle of the cable or chain for easy visibility. • Drive carefully so the towing cable or chain remains tight during towing. • Before towing, check the reduction gear for fluid leaks under your vehicle. If the reduction gear is leaking, flatbed equipment or a towing dolly must be used. To avoid damage to your vehicle and vehicle components when towing: • Always pull straight ahead when using the towing hooks. Do not pull from the side or at a vertical angle. • Do not use the towing hooks to pull a vehicle out of mud, sand or other conditions from which the vehicle cannot be driven out under its own power. • Limit the vehicle speed to 10 mph (15 km/h) and drive less than 1 mile (1.5 km) when towing to avoid serious damage to the reduction gear. 6-27 What to do in an emergency Accelerate or decelerate the vehicle in a slow and gradual manner while maintaining tension on the tow rope or chain to start or drive the vehicle, otherwise tow hooks and the vehicle may be damaged. The driver must be in the vehicle for steering and braking operations when the vehicle is being towed. Passengers other than the driver must not be in the vehicle. 6 Maintenance Fuel cell power module compartment.................7-3 Maintenance services ...........................................7-4 Owner's Responsibility.....................................................7-4 Owner Maintenance Precautions..................................7-4 Wiper blades .........................................................7-24 Blade Inspection ..............................................................7-24 Blade Replacement .........................................................7-24 12V battery ...........................................................7-27 Battery recharging .........................................................7-28 Reset Features.................................................................7-28 Scheduled maintenance services.........................7-7 Tires and wheels ..................................................7-29 Normal Maintenance Schedule ......................................7-8 Maintenance Under Severe Usage Conditions ........7-10 Tire Care............................................................................7-29 Recommended Cold Tire Inflation Pressures...........7-30 Check Tire Inflation Pressure ......................................7-31 Tire Rotation.....................................................................7-32 Wheel Alignment and Tire Balance ............................7-33 Tire Replacement ............................................................7-33 Wheel Replacement ........................................................7-34 Tire Traction .....................................................................7-34 Tire Maintenance ............................................................7-34 Tire Sidewall Labeling ....................................................7-34 Tire Terminology and Definitions................................7-38 All Season Tires...............................................................7-42 Summer Tires ...................................................................7-42 Snow Tires ........................................................................7-42 Radial-Ply Tires ...............................................................7-42 Low Aspect Ratio Tires..................................................7-43 Explanation of scheduled maintenance items.7-12 Device cooling coolant ........................................7-13 Checking the Coolant Level..........................................7-13 Changing Coolant ............................................................7-15 Stack cooling coolant..........................................7-16 Checking the Coolant Level..........................................7-16 Changing Coolant ............................................................7-18 Brake fluid ............................................................7-19 Checking the Brake Fluid Level...................................7-19 Washer fluid .........................................................7-20 Checking the Washer Fluid Level................................7-20 Air cleaner ............................................................7-20 Filter Replacement..........................................................7-20 Climate control air filter .....................................7-22 Filter Inspection...............................................................7-22 Maintenance Owner maintenance schedule........................................7-6 Owner maintenance...............................................7-5 7 Fuses......................................................................7-45 Instrument Panel Fuse Replacement..........................7-46 Fuel cell power module compartment Panel Fuse Replacement ...............................................7-47 Fuse/Relay Panel Description......................................7-49 Light bulbs.............................................................7-57 Headlight, front center lamp, turn signal lamp, daytime running lamp, parking lamp, side marker replacement ......................................................................7-58 Side Repeater Lamp Replacement ..............................7-58 Rear Combination Light Bulb Replacement ..............7-59 High mounted stop lamp ...............................................7-59 License Plate Light Bulb Replacement ......................7-60 Interior Light Bulb Replacement .................................7-60 Appearance care ..................................................7-62 Exterior Care ....................................................................7-62 Interior Care .....................................................................7-67 California perchlorate notice .............................7-70 7 FUEL CELL POWER MODULE COMPARTMENT 1. Brake fluid reservoir 2. Air cleaner 3. Fuse box 4. Windshield washer fluid reservoir Maintenance 5. Device cooling coolant reservoir 6. Traction motor radiator cap 7. Stack cooling coolant reservoir 8. Fuel cell stack radiator cap 7 The actual fuel cell power module compartment in the vehicle may differ from the illustration. OFE071001N 7-3 Maintenance MAINTENANCE SERVICES You should exercise the utmost care to prevent damage to your vehicle and injury to yourself whenever performing any maintenance or inspection procedures. Have your vehicle maintained and repaired by an authorized HYUNDAI dealer. An authorized HYUNDAI dealer meets HYUNDAI's high service quality standards and receives technical support from HYUNDAI in order to provide you with a high level of service satisfaction. WARNING High voltage caution Do not disassemble or perform maintenance on the fuel cell system unless you are qualified. The fuel cell system can be highly dangerous since there are many high voltage parts inside even if when power is off. 7-4 Owner's Responsibility Maintenance service and record retention are the owner's responsibility. You should retain documents that show proper maintenance has been performed on your vehicle in accordance with the scheduled maintenance service charts shown on the following pages. You need this information to establish your compliance with the servicing and maintenance requirements of your vehicle warranties. Detailed warranty information is provided in your Owner's Handbook & Warranty Information booklet. Repairs and adjustments required as a result of improper maintenance or a lack of required maintenance are not covered. Owner Maintenance Precautions Inadequate, incomplete or insufficient servicing may result in operational problems with your vehicle that could lead to vehicle damage, an accident, or personal injury. This chapter provides instructions only for the maintenance items that are easy to perform. Several procedures can be done only by an authorized HYUNDAI dealer with special tools. Your vehicle should not be modified in any way. Such modifications may adversely affect the performance, safety or durability of your vehicle and may, in addition, violate conditions of the limited warranties covering the vehicle. Certain modifications may also be in violation of regulations established by the U.S. Department of Transportation and other federal or state agencies. OWNER MAINTENANCE NOTICE Improper owner maintenance during the warranty period may affect warranty coverage. For details, read the separate Owner's Handbook & Warranty Information booklet provided with the vehicle. If you're unsure about any service or maintenance procedure, have it done by an authorized HYUNDAI dealer. WARNING Maintenance Performing maintenance work on a vehicle can be dangerous. If you lack sufficient knowledge and experience or the proper tools and equipment to do the work, have it done by an authorized HYUNDAI dealer. ALWAYS follow these precautions for performing maintenance work: • Park your vehicle on level ground, shift to the P (Park) position, apply the parking brake, and place the POWER button in the OFF position. • Block the tires (front and back) to prevent the vehicle from moving. Remove loose clothing or jewelry that can become entangled in moving parts. • Keep flames, sparks, or smoking materials away from the battery related parts. The following lists are vehicle checks and inspections that should be performed by the owner or an authorized HYUNDAI dealer at the frequencies indicated to help ensure safe, dependable operation of your vehicle. Any adverse conditions should be brought to the attention of your dealer as soon as possible. These Owner Maintenance vehicle checks are generally not covered by warranties and you may be charged for labor, parts and lubricants used. 7 7-5 Maintenance Owner maintenance schedule When you stop for fuel: • Check for both fuel cell stack and Device cooling coolant level in coolant reservoir. • Check the windshield washer fluid level. • Look for low or under-inflated tires. WARNING Be careful when checking the coolant level when the fuel cell power module is hot. Scalding hot coolant and steam may blow out under pressure. This could cause burns or other serious injury. 7-6 While operating your vehicle: At least monthly: • Check for vibrations in the steering wheel. Notice if there is any increased steering effort or looseness in the steering wheel, or change in its straight-ahead position. • Notice if your vehicle constantly turns slightly or "pulls" to one side when traveling on smooth, level road. • When stopping, listen and check for unusual sounds, pulling to one side, increased brake pedal travel or "hard-to-push" brake pedal. • If any slipping or changes in the operation of your reduction gear occurs, check the reduction gear fluid level. • Check the reduction gear P (Park) function. • Check the parking brake. • Check for fluid leaks under your vehicle (water dripping from the air conditioning system during or after use is normal). • Check coolant level in the coolant reservoir. • Check the operation of all exterior lights, including the brake lights, turn signals and hazard warning flashers. • Check the inflation pressures of all tires that are worn, show uneven wear, or are damaged. • Check for loose wheel lug nuts. At least twice a year: (for example, every Spring and Fall) • Check radiator, heater and air conditioning hoses for leaks or damage. • Check windshield washer spray and wiper operation. Clean wiper blades with clean cloth dampened with washer fluid. • Check headlight alignment. • Check the seat belts for wear and function. SCHEDULED MAINTENANCE SERVICES At least once a year: If your vehicle is operated under the above conditions, you should inspect, replace or refill more frequently than the following Normal Maintenance Schedule. After the periods or distance shown in the chart, continue to follow the prescribed maintenance intervals. 7-7 Maintenance • Clean body and door drain holes. • Lubricate door hinges and hood hinges. • Lubricate door and hood locks and latches. • Lubricate door rubber weather strips. • Lubricate door checker. • Check the air conditioning system. • Inspect and lubricate reduction gear linkage and controls. • Check the brake fluid level. Follow Normal Maintenance Schedule if the vehicle is usually operated where none of the following conditions apply. If any of the following conditions apply, you must follow the Maintenance Under Severe Usage Conditions. • Repeated driving short distance of less than 8 km (5 miles) in normal temperature or less than 16 km (10 miles) in freezing temperature • Low speed driving for long distances • Driving on rough, dusty, muddy, unpaved, graveled or salt-spread roads • Driving in areas using salt or other corrosive materials or in very cold weather • Driving in heavy dust condition • Driving in heavy traffic area • Driving on uphill, downhill, or mountain road repeatedly • Towing a trailer or using a camper, or roof rack • Driving as a patrol car, taxi, other commercial use of vehicle towing • Driving over 170 km/h (106 miles/h) • Frequently driving in stop-and-go condition 7 Maintenance Normal Maintenance Schedule Maintenance Months Intervals Miles×1,000 Maintenance Km×1,000 Item 12 24 36 48 60 72 84 96 108 120 132 144 156 168 180 6 12 18 24 30 36 42 48 54 60 66 72 78 84 90 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 Hydrogen system (Check the hydrogen leakage) Inspect every 6,000 miles (10,000 km) or 24 months Air cleaner filter Replace every at 12,000 (20,000 km) miles Device cooling coolant At first, replace at 120,000 miles (200,000 km) or 10 years : Thereafter, replace every 30,000 miles (48,000 km) or 24 months Stack cooling coolant Replace every at 36,000 miles (60,000 km) or 36 months Ion filter Replace every at 36,000 miles (60,000 km) or 36 months Reduction gear No check, No service required Air conditioner refrigerant/ compressor I I I I I I I I I I I I I I I Brake lines, hoses and connections I I I I I I I I I I I I I I I Brake discs and pads I I I I I I I I I I I I I I I I I I I Driveshaft and boots Front suspension ball joints I I I I I I I : Inspect and if necessary, adjust, correct, clean or replace. R : Replace 7-8 I I I I I I I I I I I I Normal Maintenance Schedule (Cont.) Maintenance Months Intervals Miles×1,000 Maintenance Km×1,000 Item 12 24 36 48 60 72 84 96 108 120 132 144 156 168 180 6 12 18 24 30 36 42 48 54 60 66 72 78 84 90 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 Parking brake I I I I I I I I I I I I I I I Steering gear rack, linkage and boots I I I I I I I I I I I I I I I Tire (pressure & tread wear) I I I I I I I I I I I I I I I Battery condition I I I I I I I I I I I I I I I R R R Inspect every 15,000 miles (24,000 km) or 12 months, Replace every 60,000 miles (96,000 km) or 48 months Brake fluid R R R R R R R R R R R R I : Inspect and if necessary, adjust, correct, clean or replace. R : Replace Maintenance Climate control air filter 7 7-9 Maintenance Maintenance Under Severe Usage Conditions The following items must be serviced more frequently on cars normally used under severe driving conditions. Refer to the chart below for the appropriate maintenance intervals. R : Replace I : Inspect and, after inspection, clean, adjust, repair or replace if necessary Maintenance item Maintenance operation Hydrogen system (Check the hydrogen leakage) I Air cleaner filter I Device cooling coolant R Stack cooling coolant R Ion filter R Reduction gear fluid R Air conditioner refrigerant/compressor I Disc brakes and pads, calipers and rotors I 7-10 Maintenance intervals Driving condition Inspect more frequently depending on the condition Inspect more frequently depending on the condition Replace more frequently depending on the condition Replace more frequently depending on the condition Replace more frequently depending on the condition C, D, E, F, J, K, L 72,000 miles (120,000 km) C, F, G, I, J Inspect more frequently depending on the condition Inspect more frequently depending on the condition C, D, F, G, J, L C, D, E C, D, F, G, L C, D, F, G, L C, D, F, G, L C, D, E, G, H Maintenance item Maintenance operation Driveshaft and boots I Front suspension ball joints I Parking brake I Steering gear rack, linkage and boots I Climate control air filter R Maintenance intervals Inspect more frequently depending on the condition Inspect more frequently depending on the condition Inspect more frequently depending on the condition Inspect more frequently depending on the condition Replace more frequently depending on the condition Driving condition C, D, E, F, G, H, I, J C, D, E, F, G C, D, G, H C, D, E, F, G C, E A - Repeatedly driving short distances of less than 5 miles (8 km) in normal temperature or less than 10 miles (16 km) in freezing temperature B - Extensive low speed driving for long distances C- Driving on rough, dusty, muddy, unpaved, graveled or saltspread roads D- Driving in areas using salt or other corrosive materials or in very cold weather E - Driving in sandy areas F - Driving in heavy traffic area over 90°F (32°C) G- Driving on uphill, downhill, or mountain road H- Towing a Trailer, or using a camper, or roof rack I - Driving as a patrol car, taxi, other commercial use or vehicle towing J - Driving over 106 mph (170 km/h) K - Frequently driving in stop-and-go conditions 7-11 Maintenance Severe driving conditions 7 Maintenance EXPLANATION OF SCHEDULED MAINTENANCE ITEMS Cooling System Brake Fluid Check cooling system components, such as radiator, coolant reservoir, hoses and connections for leakage and damage. Replace any damaged parts. Check brake fluid level in the brake fluid reservoir. The level should be between the MIN and the MAX marks on the side of the reservoir. Use only hydraulic brake fluid conforming to DOT 3 or DOT 4 specification. Coolant The coolant should be changed at the intervals specified in the maintenance schedule. Brake Discs, Pads, Calipers and Rotors Reduction Gear Fluid Check the pads for excessive wear, discs for run out and wear, and calipers for fluid leakage. Inspect the reduction gear fluid according to the maintenance schedule. Suspension Mounting Bolts Brake Hoses and Lines Check the suspension connections for looseness or damage. Retighten to the specified torque. Visually check for proper installation, chafing, cracks, deterioration and any leakage. Replace any deteriorated or damaged parts immediately. 7-12 Steering Gear Box, Linkage & Boots/Lower Arm Ball Joint With the vehicle stopped and the vehicle off, check for excessive freeplay in the steering wheel. Check the linkage for bends or damage. Check the dust boots and ball joints for deterioration, cracks, or damage. Replace any damaged parts. Drive Shafts and Boots Check the drive shafts, boots and clamps for cracks, deterioration, or damage. Replace any damaged parts and, if necessary, repack the grease. Air Conditioning Refrigerant Check the air conditioning lines and connections for leakage and damage. DEVICE COOLING COOLANT The high-pressure cooling system has a reservoir filled with year-round antifreeze coolant. The reservoir is filled at the factory. Check the antifreeze protection and coolant level at least once a year, at the beginning of the winter season and before traveling to a colder climate. Checking the Coolant Level OFE078003 • When adding coolant, use only distilled (deionized) water for your vehicle and never mix hard water in the coolant filled at the factory. • An improper coolant mixture can result in severe malfunction or electric devices damage. • Do not use alcohol or methanol coolant or mix them with the specified coolant. • Do not use a solution that contains more than 60% antifreeze or less than 35% antifreeze, which would reduce the effectiveness of the solution. Maintenance Check the condition and connections of all cooling system hoses and heater hoses. Replace any swollen or deteriorated hoses. The coolant level should be filled between the MAX and the MIN marks on the rear side of the coolant reservoir when the parts in the fuel cell power module compartment is cool. If the coolant level is low, add enough distilled (deionized) water to bring the level to the MAX mark, but do not overfill. If frequent additions are required, you see an authorized HYUNDAI dealer for a cooling system inspection. Recommended coolant 7 7-13 Maintenance For mixing percentage, refer to the following table: Ambient Temperature 5°F (-15°C) -13°F (-25°C) -31°F (-35°C) -49°F (-45°C) Mixture Percentage (volume) Antifreeze 35 40 50 60 Water 65 60 50 40 OFE078004 i Information If in doubt about the mix ratio, a 50% water and 50% antifreeze mix is the easiest to mix together as it will be the same quantity of each. It is suitable to use for most temperature ranges of - 31°F and higher. 7-14 WARNING Never remove the radiator cap or the drain plug while the radiator is hot. Hot coolant and steam may blow out under pressure, causing serious injury. Turn the vehicle off and wait until the parts in the fuel cell power module compartment cools down. Use extreme care when removing the radiator cap. Wrap a thick towel around it, and turn it counterclockwise slowly to the first stop. Step back while the pressure is released from the cooling system. When you are sure all the pressure has been released, press down on the cap, using a thick towel, and continue turning counterclockwise to remove it. WARNING The electric motor for the cooling fan may continue to operate or start up when the vehicle is not running and can cause serious injury. Keep hands, clothing and tools away from the rotating fan blades of the cooling fan. Have coolant changed by an authorized HYUNDAI dealer according to the Maintenance Schedule at the beginning of this chapter. WARNING Do not use coolant or antifreeze in the washer fluid reservoir. Coolant can severely obscure visibility when sprayed on the windshield and may cause loss of vehicle control resulting in an accident. Coolant may also cause damage to paint and body trim. NOTICE To prevent damage to parts in the fuel cell power module compartment, put a thick towel around the coolant cap before refilling the coolant to prevent the coolant from overflowing into parts in the fuel cell power module compartment. Maintenance The electric motor for the cooling fan is controlled by coolant temperature, refrigerant pressure and vehicle speed. As the coolant temperature decreases, the electric motor will automatically shut off. This is a normal condition. Changing Coolant 7 7-15 Maintenance STACK COOLING COOLANT The high-pressure cooling system has a reservoir filled with year-round antifreeze coolant. The reservoir is filled at the factory. Check the antifreeze protection and coolant level at least once a year, at the beginning of the winter season and before traveling to a colder climate. Checking the Coolant Level OFE078005 Check the condition and connections of all cooling system hoses and heater hoses. Replace any swollen or deteriorated hoses. When replacing any part of the cooling system there may be loss of coolant. In that case, fill with an exclusive coolant for the fuel cell. When replacing the ion filter cartridge, replace the whole stack coolant. The coolant level should be filled between F (MAX) and L (MIN) marks on the side of the coolant reservoir when the fuel cell power module is cool. 7-16 If the stack cooling coolant level is low, add enough exclusive coolant for fuel cell stack to provide protection against freezing and corrosion in the authorized HYUNDAI dealer. In addition, whenever replacing the ion filter cartridge, add enough exclusive coolant for fuel cell stack. Stack cooling coolant • When adding stack cooling coolant, use only exclusive coolant for fuel cell stack in authorized HYUNDAI dealer and never mix any water or liquid. • An improper coolant mixture can result in severe malfunction or electric devices damage. • If the vehicle is damaged by adding unspecified liquid except exclusive coolant for fuel cell stack, it will not be covered by the warranty. OFE078006 Never remove the radiator cap or the drain plug while the radiator is hot. Hot coolant and steam may blow out under pressure, causing serious injury. Maintenance WARNING Turn the vehicle off and wait until the parts in the fuel cell power module compartment cools down. Use extreme care when removing the cap. Wrap a thick towel around it, and turn it counterclockwise slowly to the first stop. Step back while the pressure is released from the cooling system. When you are sure all the pressure has been released, press down on the cap, using a thick towel, and continue turning counterclockwise to remove it. 7 7-17 Maintenance WARNING The electric motor for the cooling fan may continue to operate or start up when the vehicle is not running and can cause serious injury. Keep hands, clothing and tools away from the rotating fan blades of the cooling fan. The electric motor for the cooling fan is controlled by coolant temperature, refrigerant pressure and vehicle speed. As the coolant temperature decreases, the electric motor will automatically shut off. This is a normal condition. 7-18 Changing Coolant For the fuel cell stack, an exclusive coolant must be used . When changing the fuel cell stack coolant, have that coolant be changed by an authorized HYUNDAI dealer according to the Maintenance Schedule at the beginning of this chapter. WARNING Do not use coolant or antifreeze in the washer fluid reservoir. Coolant can severely obscure visibility when sprayed on the windshield and may cause loss of vehicle control resulting in an accident. Coolant may also cause damage to paint and body trim. NOTICE To prevent damage to parts in the fuel cell power module compartment, put a thick towel around the coolant cap before refilling the coolant to prevent the coolant from overflowing into parts in the fuel cell power module compartment. CAUTION Do not mix-up the caps of device cooling coolant and stack cooling coolant because the fluid material is different. If the cap is mixed, the fuel cell system may be damage. Have you consult an authorized HYUNDAI dealer. BRAKE FLUID Checking the Brake Fluid Level If the level is low, add the specified brake fluid to the MAX level. The level will fall with accumulated mileage. This is a normal condition associated with the wear of the brake linings. If the fluid level is excessively low, have the brake system checked by an authorized HYUNDAI dealer. WARNING Check the fluid level in the reservoir periodically. The fluid level should be between MAX and MIN marks on the side of the reservoir. Before removing the reservoir cap and adding brake fluid, clean the area around the reservoir cap thoroughly to prevent brake fluid contamination. WARNING • Do not allow brake fluid to contact the vehicle’s body paint, as it will result in paint damage. • NEVER use brake fluid which has been exposed to open air for an extended time, as its quality cannot be guaranteed. It should be disposed of properly. • Do not use the wrong type of brake fluid. A few drops of mineral based oil such as engine oil, in your brake system can damage brake system parts. i Information Use only the specified brake fluid (refer to "Recommended Lubricants and Capacities" in chapter 8). Do not let brake fluid enter into your eyes. If brake fluid gets in your eyes, flush your eyes with clean water for at least 15 minutes and get immediate medical attention. 7-19 Maintenance OFE078007 If the brake system requires frequent additions of fluid this could indicate a leak in the brake system. Have the vehicle inspected by an authorized HYUNDAI dealer. NOTICE 7 Maintenance WASHER FLUID AIR CLEANER Checking the Washer Fluid Level Filter Replacement OFE078008 Check the fluid level in the washer fluid reservoir and add fluid if necessary. Plain water may be used if washer fluid is not available. However, use washer solvent with antifreeze characteristics in cold climates to prevent freezing. 7-20 WARNING To prevent serious injury or death, take the following safety precautions when using washer fluid: • Do not use coolant or antifreeze in the washer fluid reservoir. Coolant can severely obscure visibility when sprayed on the windshield and may cause loss of vehicle control resulting in an accident or damage to paint and body trim. • Do not allow sparks or flame to contact the washer fluid or the washer fluid reservoir. Washer fluid may contain alcohol and can be flammable. • Do not drink washer fluid and avoid contact with skin. Washer fluid is harmful to humans and animals. • Keep washer fluid away from children and animals. Faulty air cleaner filter has a direct influence on reduction of the stack output, etc. Replace the filter according to the maintenance schedule. i Information If the vehicle is operated in extremely dusty or sandy areas, replace the air cleaner filter more often than the usual recommended intervals (refer to "Maintenance Under Severe Usage Conditions" in this chapter). CAUTION OFE078010 1. Loosen the air cleaner cover attaching clips and open the cover. 2. Wipe the inside of the air cleaner. 3. Replace the air cleaner filter. 4. Lock the cover with the cover attaching clips. 5. Check that the cover is firmly installed. • Do not drive with the air cleaner filter removed. This will result in excessive wear. • When removing the air cleaner filter, be careful that dust or dirt does not enter the air intake, or damage may result. • Use HYUNDAI genuine parts, use of non-genuine parts could damage the air flow sensor. 7-21 Maintenance OFE078009 7 Maintenance CLIMATE CONTROL AIR FILTER Filter Inspection The climate control air filter should be replaced according to the Maintenance Schedule. If the vehicle is operated in severely air-polluted cities or on dusty rough roads for a long period, it should be inspected more frequently and replaced earlier. When you replace the climate control air filter, replace it performing the following procedure, and be careful to avoid damaging other components. OFE078012 1. With the glove box open, remove the stoppers on both sides to allow the glove box to hang freely on the hinges. 7-22 OFE078011 2. Remove the support rod (1). NOTICE Install a new climate control air filter in the correct direction with the arrow symbol (↓) facing downwards. Otherwise, the climate control effects may decrease, possibly with a noise. OHG075041 5. Replace the climate control air filter. 6. Reassemble in the reverse order of disassembly. Maintenance OFE078013 3. Press and hold the lock (1) on left side of the cover. 4. Pull out (2) the cover. 7 7-23 Maintenance WIPER BLADES Blade Inspection Contamination of either the windshield or the wiper blades with foreign matter can reduce the effectiveness of the windshield wiper functionality. Common sources of contamination are insects, tree sap, and hot wax treatments used by some commercial car washes. If the blades are not wiping properly, clean both the window and the blades with a clean cloth dampened with washer fluid. NOTICE To prevent damage to the wiper blades, arms or other components, do not: • Use gasoline, kerosene, paint thinner, or other solvents on or near them. • Attempt to move the wipers manually. • Use non-specified wiper blades. 7-24 i Information Commercial hot waxes applied by automatic car washes have been known to make the windshield difficult to clean. Front windshield wiper service positions Blade Replacement When the wipers no longer clean adequately, the blades may be worn or cracked, and require replacement. NOTICE To prevent damage to the wiper arms or other components, do not attempt to move the wipers manually. NOTICE The use of a non-specified wiper blade could result in wiper malfunction and failure. OFE078038N This vehicle has a "hidden" wiper design which means that the wipers cannot be lifted when they are in their bottom resting position. 1. Within 20 seconds of turning off the vehicle, lift and hold the wiper lever up to the MIST position for about 2 seconds until the wipers move to the top wipe position. 2. At this time you can lift the wipers off the windshield. 3. Gently put the wipers back down onto the windshield. 4. Turn the wipers to any ON position to return the wipers to the bottom resting position. Front windshield wiper blade replacement OLF074019 3. Install the new blade assembly in the reverse order of removal. 4. Return the wiper arm on the windshield. CAUTION To prevent damage to the wiper arms or other components, have an authorized HYUNDAI dealer replace the wiper blade. 7-25 Maintenance OLF074017 1. Raise the wiper arm. OLF074018 2. Lift up the wiper blade clip. Then pull down the blade assembly and remove it. 7 Maintenance Rear window wiper blade replacement OFE078016 1. Operate the rear windshield wiper to make sure the blade is on lower position. Then turn off the vehicle. 7-26 OFE078014 OFE078015 2. Raise the wiper arm (1) and pull out the wiper blade assembly. 3. Install the new blade assembly by inserting the center part into the slot in the wiper arm until it clicks into place. 4. Make sure the blade assembly is installed firmly by trying to pull it slightly. To prevent damage to the wiper arms or other components, we recommend that the wiper blades be replaced by an authorized HYUNDAI dealer. 12V BATTERY The vehicle is not equipped with a common 12V battery which requires periodic replacement. The battery is a lithium polymer type integrated into the high voltage battery. Full discharge of the battery is prevented through 12V battery protection system which can isolate the 12V battery. WARNING Always follow these instructions when handling your vehicle's battery to prevent damage to your battery: • If you connect unauthorized electronic devices to the battery, the battery may be discharged. Never use unauthorized devices. Maintenance To prevent SERIOUS INJURY or DEATH to you or bystanders, always follow these precautions when working near or handling the battery: Always read and follow instructions carefully when handling a battery. Wear eye protection designed to protect the eyes from acid splashes. Keep all flames, sparks, or smoking materials away from the battery. • NEVER attempt to recharge the battery when the vehicle’s battery cables are connected to the battery. • The electrical ignition system works with high voltage. NEVER touch these components with the vehicle ON ( indicator ON) or when the POWER button is in the ON position. NOTICE 7 7-27 Maintenance Battery recharging By RESET button OFEQ019028L To charge the discharged 12V battery, attempt charging by pressing 12V BATT RESET button. For more details, refer to “If the 12 volt battery is discharged” in chapter 6. 7-28 By jump starting Reset Features After a jump start from a good battery, drive the vehicle for 20-30 minutes before it is shutoff. The vehicle may not restart if you shut it off before the battery had a chance to adequately recharge. See “Jump Starting” in chapter 6 for more information on jump starting procedures. Some items need to be reset after the battery has been discharged or the battery has been disconnected. See chapter 3 for: • Power Windows • Trip Computer • Climate Control System • Clock • Audio System • Sunroof • Driver Position Memory System TIRES AND WHEELS WARNING Tire Care For proper maintenance, safety, and maximum fuel economy, you must always maintain recommended tire inflation pressures and stay within the load limits and weight distribution recommended for your vehicle. Maintenance Tire failure may cause loss of vehicle control resulting in an accident. To reduce risk of SERIOUS INJURY or DEATH, take the following precautions: • Inspect your tires monthly for proper inflation as well as wear and damage. • The recommended cold tire pressure for your vehicle can be found in this manual and on the tire label located on the driver's side center pillar. Always use a tire pressure gauge to measure tire pressure. Tires with too much or too little pressure wear unevenly causing poor handling. • Replace tires that are worn, show uneven wear, or are damaged. Worn tires can cause loss of braking effectiveness, steering) control, or traction. • ALWAYS replace tires with the same size as each tire that was originally supplied with this vehicle. Using tires and wheels other than the recommended sizes could cause unusual handling characteristics, poor vehicle control, or negatively affect your vehicle's Anti-Lock Brake System (ABS) resulting in a serious accident. 7 7-29 Maintenance Recommended Cold Tire Inflation Pressures OFE088003 All specifications (sizes and pressures) can be found on a label attached to the driver’s side center pillar. 7-30 All tire pressures should be checked when the tires are cold. "Cold tires" means the vehicle has not been driven for at least three hours or driven less than one mile (1.6 km). Warm tires normally exceed recommended cold tire pressures by 4 to 6 psi (28 to 41 kPa). Do not release air from warm tires to adjust the pressure or the tires will be under-inflated. For recommended inflation pressure, refer to "Tire and Wheels" in chapter 8. WARNING Recommended pressures must be maintained for the best ride, vehicle handling, and minimum tire wear. Over-inflation or under-inflation can reduce tire life, adversely affect vehicle handling, and lead to sudden tire failure that could result in loss of vehicle control resulting in an accident. Severe under-inflation can lead to severe heat build-up, causing blowouts, tread separation and other tire failures that can result in the loss of vehicle control resulting in an accident. This risk is much higher on hot days and when driving for long periods at high speeds. CAUTION • Under-inflation Check your tires once a month or more. How to check Use a good quality tire pressure gauge to check tire pressure. You can not tell if your tires are properly inflated simply by looking at them. Radial tires may look properly inflated when they are under-inflated. Remove the valve cap from the tire valve stem. Press the tire gauge firmly onto the valve to get a pressure measurement. If the cold tire inflation pressure matches the recommended pressure on the tire and loading information label, no further adjustment is necessary. If the pressure is low, add air until you reach the recommended pressure. Make sure to put the valve caps back on the valve stems. Without the valve cap, dirt or moisture could get into the valve core and cause air leakage. If a valve cap is missing, install a new one as soon as possible. If you overfill the tire, release air by pushing on the metal stem in the center of the tire valve. Recheck the tire pressure with the tire gauge. Be sure to put the valve caps back on the valve stems. Without the valve cap, dirt or moisture could get into the valve core and cause air leakage. If a valve cap is missing, install a new one as soon as possible. Maintenance results in excessive wear, poor handling and reduced fuel economy. Wheel deformation is also possible. Keep your tire pressures at the proper levels. If a tire frequently needs refilling, have it checked by an authorized HYUNDAI dealer. • Over-inflation produces a harsh ride, excessive wear at the center of the tire tread, and a greater possibility of damage from road hazards. Check Tire Inflation Pressure 7 7-31 Maintenance i Information Tire Rotation To equalize tread wear, HYUNDAI recommends that the tires be rotated every 6,000 miles (10,000 km) or sooner if irregular wear develops. During rotation, check the tires for correct balance. When rotating tires, check for uneven wear and damage. Abnormal wear is usually caused by incorrect tire pressure, improper wheel alignment, outof-balance wheels, severe braking or severe cornering. Look for bumps or bulges in the tread or side of tire. Replace the tire if you find either of these conditions. Replace the tire if fabric or cord is visible. After rotation, be sure to bring the front and rear tire pressures to specification and check lug nut tightness (proper torque is 79~94 lbf·ft [11~13 kgf·m]). 7-32 ODH073802 Disc brake pads should be inspected for wear whenever tires are rotated. Tires that are asymmetrical or directional can only be installed on the wheel in one direction. The outside and inside of an asymmetrical tire is not easily distinguishable. Pay careful attention to the markings on the sidewalls of the tires, noting the "outside" marking and also the rotating direction before installing them on the vehicle. WARNING Do not mix bias ply and radial ply tires under any circumstances. This may cause unusual handling characteristics that may cause loss of vehicle control resulting in an accident. Wheel Alignment and Tire Balance NOTICE Improper wheel weights can damage your vehicle's aluminum wheels. Use only approved wheel weights. WARNING Tread wear indicator OLMB073027 If the tire is worn evenly, a tread wear indicator will appear as a solid band across the tread. This shows there is less than 1/16 inch (1.6 mm) of tread left on the tire. Replace the tire when this happens. Do not wait for the band to appear across the entire tread before replacing the tire. To reduce the risk of DEATH or SERIOUS INJURY: • Replace tires that are worn, show uneven wear, or are damaged. Worn tires can cause loss of braking effectiveness, steering control, and traction. • Always replace tires with the same size as each tire that was originally supplied with this vehicle. Using tires and wheels other than the recommended sizes could cause unusual handling characteristics, poor vehicle control, or negatively affect your vehicle's Anti-Lock Brake System (ABS) resulting in a serious accident. 7-33 Maintenance The wheels on your vehicle were aligned and balanced carefully at the factory to give you the longest tire life and best overall performance. In most cases, you will not need to have your wheels aligned again. However, if you notice unusual tire wear or your vehicle pulling one way or the other, the alignment may need to be reset. If you notice your vehicle vibrating when driving on a smooth road, your wheels may need to be rebalanced. Tire Replacement 7 Maintenance • Tires degrade over time, even when they are not being used. Regardless of the remaining tread, HYUNDAI recommends that tires be replaced after six (6) years of normal service. • When replacing tires (or wheels), it is recommended to replace the two front or two rear tires (or wheels) as a pair. Replacing just one tire can seriously affect your vehicle's handling. • Heat caused by hot climates or frequent high loading conditions can accelerate the aging process. Failure to follow this warning may cause sudden tire failure, which could lead to a loss of vehicle control resulting in an accident. 7-34 Wheel Replacement Tire Maintenance When replacing the metal wheels for any reason, make sure the new wheels are equivalent to the original factory units in diameter, rim width and offset. In addition to proper inflation, correct wheel alignment helps to decrease tire wear. If you find a tire is worn unevenly, have your dealer check the wheel alignment. When you have new tires installed, make sure they are balanced. This will increase vehicle ride comfort and tire life. Additionally, a tire should always be rebalanced if it is removed from the wheel. Tire Traction Tire traction can be reduced if you drive on worn tires, tires that are improperly inflated or on slippery road surfaces. Tires should be replaced when tread wear indicators appear. To reduce the possibility of losing control, slow down whenever there is rain, snow or ice on the road. Tire Sidewall Labeling This information identifies and describes the fundamental characteristics of the tire and also provides the tire identification number (TIN) for safety standard certification. The TIN can be used to identify the tire in case of a recall. 1 5,6 7 4 2 3 1 OLMB073028 1. Manufacturer or brand name 2. Tire size designation A tire’s sidewall is marked with a tire size designation. You will need this information when selecting replacement tires for your car. The following explains what the letters and numbers in the tire size designation mean. 225 - Tire width in millimeters. 60 - Aspect ratio. The tire’s section height as a percentage of its width. R - Tire construction code (Radial). 17 - Rim diameter in inches. 99 - Load Index, a numerical code associated with the maximum load the tire can carry. H - Speed Rating Symbol. See the speed rating chart in this section for additional information. Wheel size designation Wheels are also marked with important information that you need if you ever have to replace one. The following explains what the letters and numbers in the wheel size designation mean. Example wheel size designation: 7.0J x 17 7.0 - Rim width in inches. J - Rim contour designation. 17 - Rim diameter in inches. Maintenance Manufacturer or brand name is shown. Example tire size designation: (These numbers are provided as an example only; your tire size designator could vary depending on your vehicle.) 225/60 R17 99H 7 7-35 Maintenance Tire speed ratings The chart below lists many of the different speed ratings currently being used for passenger car tires. The speed rating is part of the tire size designation on the sidewall of the tire. This symbol corresponds to that tire’s designed maximum safe operating speed. Speed Rating Symbol S T H V W Y 7-36 Maximum Speed 112 118 130 149 168 186 mph mph mph mph mph mph (180 (190 (210 (240 (270 (300 km/h) km/h) km/h) km/h) km/h) km/h) 3. Checking tire life (TIN : Tire Identification Number) 4. Tire ply composition and material Any tires that are over six years old, based on the manufacturing date, should be replaced by new ones. You can find the manufacturing date on the tire sidewall (possibly on the inside of the wheel), displaying the DOT Code. The DOT Code is a series of numbers on a tire consisting of numbers and English letters. The manufacturing date is designated by the last four digits (characters) of the DOT code. The number of layers or plies of rubber-coated fabric in the tire. Tire manufacturers also must indicate the materials in the tire, which include steel, nylon, polyester, and others. The letter "R" means radial ply construction; the letter "D" means diagonal or bias ply construction; and the letter "B" means belted-bias ply construction. DOT : XXXX XXXX OOOO This number is the greatest amount of air pressure that should be put in the tire. Do not exceed the maximum permissible inflation pressure. Refer to the Tire and Loading Information label for recommended inflation pressure. The front part of the DOT means a plant code number, tire size and tread pattern and the last four numbers indicate week and year manufactured. For example: DOT XXXX XXXX 1522 represents that the tire was produced in the 15th week of 2022. 5. Maximum permissible inflation pressure 6. Maximum load rating This number indicates the maximum load in kilograms and pounds that can be carried by the tire. When replacing the tires on the vehicle, always use a tire that has the same load rating as the factory installed tire. 7. Uniform tire quality grading Traction - AA, A, B & C The traction grades, from highest to lowest, are AA, A, B and C. Those grades represent the tire's ability to stop on wet pavement as measured under controlled conditions on specified government test surfaces of asphalt and concrete. A tire marked C may have poor traction performance. WARNING The traction grade assigned to this tire is based on straightahead braking traction tests, and does not include acceleration, cornering, hydroplaning, or peak traction characteristics. Maintenance Quality grades can be found where applicable on the tire sidewall between tread shoulder and maximum section width. For example: TREAD wear 200 TRACTION AA TEMPERATURE A Tread wear The tread wear grade is a comparative rating based on the wear rate of the tire when tested under controlled conditions on a specified government test course. For example, a tire graded 150 would wear one-and-ahalf times (1½) as well on the government course as a tire graded 100. The relative performance of tires depends upon the actual conditions of their use, however, and may depart significantly from the norm due to variations in driving habits, service practices and differences in road characteristics and climate. These grades are molded on the sidewalls of passenger vehicle tires. The tires available as standard or optional equipment on your vehicle may vary with respect to grade. 7 7-37 Maintenance Temperature - A, B & C The temperature grades are A (the highest), B and C representing the tire’s resistance to the generation of heat and its ability to dissipate heat when tested under controlled conditions on a specified indoor laboratory test wheel. Sustained high temperature can cause the material of the tire to degenerate and reduce tire life, and excessive temperature can lead to sudden tire failure. Grade C responds to a level of performance which all passenger car tires must meet under the Federal Motor Vehicle Safety Standard No. 109. Grades B and A represent higher levels of performance on the laboratory test wheel than the minimum required by law. WARNING The temperature grade for this tire is established for a tire that is properly inflated and not overloaded. Excessive speed, under-inflation, over-inflation, or excessive loading, either separately or in combination, can cause heat build-up and possible sudden tire failure. This may cause loss of vehicle control resulting in an accident. Tire Terminology and Definitions Air Pressure The amount of air inside the tire pressing outward on the tire. Air pressure is expressed in pounds per square inch (psi) or kilopascal (kPa). Accessory Weight This means the combined weight of optional accessories. Some examples of optional accessories are reduction gear, power seats, and air conditioning. Aspect Ratio The relationship of a tire's height to its width. Belt A rubber coated layer of cords that is located between the plies and the tread. Cords may be made from steel or other reinforcing materials. 7-38 Bead DOT Markings Intended Outboard Sidewall The tire bead contains steel wires wrapped by steel cords that hold the tire onto the rim. The side of an asymmetrical tire, that must always face outward when mounted on a vehicle. A pneumatic tire in which the plies are laid at alternate angles less than 90 degrees to the centerline of the tread. A code molded into the sidewall of a tire signifying that the tire is in compliance with the U.S. Department of Transportation motor vehicle safety standards. The DOT code includes the Tire Identification Number (TIN), an alphanumeric designator which can also identify the tire manufacturer, production plant, brand and date of production. Cold Tire Pressure GVWR The amount of air pressure in a tire, measured in pounds per square inch (psi) or kilopascals (kPa) before a tire has built up heat from driving. Gross Vehicle Weight Rating A tire designated by its manufacturer as primarily intended for use on lightweight trucks or multipurpose passenger vehicles. GAWR FRT Load ratings Gross Axle Weight Rating for the Front Axle. The maximum load that a tire is rated to carry for a given inflation pressure. GAWR RR Load Index Gross Axle Weight Rating for the Rear axle. An assigned number ranging from 1 to 279 that corresponds to the load carrying capacity of a tire. Bias Ply Tire This means the weight of a motor vehicle with standard and optional equipment including the maximum capacity of fuel, oil and coolant, but without passengers and cargo. The metric unit for air pressure. Light truck(LT) tire Maintenance Curb Weight Kilopascal (kPa) 7 7-39 Maintenance Maximum Inflation Pressure Normal Occupant Weight Pneumatic tire The maximum air pressure to which a cold tire may be inflated. The maximum air pressure is molded onto the sidewall. The number of occupants a vehicle is designed to seat multiplied by 150 pounds (68 kg). A mechanical device made of rubber, chemicals, fabric and steel or other materials, that, when mounted on an automotive wheel provides the traction and contains the gas or fluid that sustains the load. Occupant Distribution Maximum Load Rating Designated seating positions. The load rating for a tire at the maximum permissible inflation pressure for that tire. Outward Facing Sidewall Maximum Loaded Vehicle Weight The sum of curb weight; accessory weight; vehicle capacity weight; and production options weight. An asymmetrical tire has a particular side that faces outward when mounted on a vehicle. The outward facing sidewall bears white lettering or bears manufacturer, brand, and/or model name molding that is higher or deeper than the same moldings on the inner facing sidewall. Passenger (P-Metric) tire A tire used on passenger cars and some light duty trucks and multipurpose vehicles. Ply A layer of rubber-coated parallel cords. 7-40 Pneumatic options weight The combined weight of installed regular production options weighing over 5 lb. (2.3 kg) in excess of the standard items which they replace, not previously considered in curb weight or accessory weight, including heavy duty breaks, ride levelers, roof rack, heavy duty battery, and special trim. Recommended Inflation Pressure Vehicle manufacturer's recommended tire inflation pressure as shown on the tire placard. Radial Ply Tire Tread A pneumatic tire in which the ply cords that extend to the beads are laid at 90 degrees to the centerline of the tread. The portion of a tire that comes into contact with the road. Treadwear Indicators Sidewall UTQGS The portion of a tire between the tread and the bead. Uniform Tire Quality Grading Standards is a tire information system that provides consumers with ratings for a tire's traction, temperature and treadwear. Ratings are determined by tire manufacturers using government testing procedures. The ratings are molded into the sidewall of the tire. Speed Rating An alphanumeric code assigned to a tire indicating the maximum speed at which a tire can operate. Load on an individual tire due to curb and accessory weight plus maximum occupant and cargo weight. Vehicle Normal Load on the Tire Load on an individual tire that is determined by distributing to each axle its share of the curb weight, accessory weight, and normal occupant weight and dividing by 2. Vehicle Placard A label permanently attached to a vehicle showing the original equipment tire size and recommended inflation pressure. 7 Traction The friction between the tire and the road surface. The amount of grip provided. Maintenance A metal support for a tire and upon which the tire beads are seated. Narrow bands, sometimes called "wear bars", that show across the tread of a tire when only 1/16 inch of tread remains. Rim Vehicle Maximum Load on the Tire Vehicle Capacity Weight The number of designated seating positions multiplied by 150 lbs. (68 kg) plus the rated cargo and luggage load. 7-41 Maintenance All Season Tires Snow Tires Radial-Ply Tires HYUNDAI specifies all season tires on some models to provide good performance for use all year round, including snowy and icy road conditions. All season tires are identified by ALL SEASON and/or M+S (Mud and Snow) on the tire sidewall. Snow tires have better snow traction than all season tires and may be more appropriate in some areas. If you equip your car with snow tires, they should be the same size and have the same load capacity as the original tires. Snow tires should be installed on all four wheels; otherwise, poor handling may result. Snow tires should carry 4 psi (28 kPa) more air pressure than the pressure recommended for the standard tires on the tire label on the driver’s side of the center pillar, or up to the maximum pressure shown on the tire sidewall, whichever is less. Do not drive faster than 75 mph (120 km/h) when your vehicle is equipped with snow tires. Radial-ply tires provide improved tread life, road hazard resistance and smoother high speed ride. The radial-ply tires used on this vehicle are of belted construction, and are selected to complement the ride and handling characteristics of your vehicle. Radial-ply tires have the same load carrying capacity, as bias-ply or bias belted tires of the same size, and use the same recommended inflation pressure. Mixing of radial-ply tires with bias-ply or bias belted tires is not recommended. Any combinations of radial-ply and bias-ply or bias belted tires when used on the same vehicle will seriously deteriorate vehicle handling. The best rule to follow is: Identical pairs of radial-ply tires should always be used as a set for the front tires and a set for the rear tires. Summer Tires HYUNDAI specifies summer tires on some models to provide superior performance on dry roads. Summer tire performance is substantially reduced in snow and ice. Summer tires do not have the tire traction rating M+S (Mud and Snow) on the tire side wall. If you plan to operate your vehicle in snowy or icy conditions, HYUNDAI recommends the use of snow tires or all season tires on all four wheels. 7-42 Longer wearing tires can be more susceptible to irregular tread wear. It is very important to follow the tire rotation interval in this chapter to achieve the tread life potential of these tires. Cuts and punctures in radial-ply tires are repairable only in the tread area, because of sidewall flexing. Consult your tire dealer for radial-ply tire repairs. WARNING Low aspect ratio tires, the aspect ratio is lower than 50, are provided for sporty looks. Because low aspect ratio tires are optimized for handling and braking, their sidewall is a little stiffer than a standard tire. Also low aspect ratio tires tend to be wider and consequently have a greater contact patch with the road surface. In some instances they may generate more road noise compared with standard tires. CAUTION Because the sidewall of a low aspect ratio tire is shorter than a standard tire, the rim of the wheel and the tire itself is more easily susceptible to damage. Use caution when driving and follow the guidelines below to help minimize damage to the wheel and tire: - When driving on a rough road or off road, drive cautiously because tires and wheels may be damaged. And after driving, inspect tires and wheels. - When passing over a pothole, speed bump, manhole, or curb stone, drive slowly so that the tires and wheels are not damaged. - If the tire is subjected to a severe impact, have the tire and wheel inspected by an authorized HYUNDAI dealer. - Inspect the tire condition and pressure every 1,800 miles (3,000 km). 7-43 Maintenance Do not mix bias ply and radial ply tires under any circumstances. This may cause unusual handling characteristics that may cause loss of vehicle control resulting in an accident. Low Aspect Ratio Tires 7 Maintenance CAUTION • It is not easy to recognize tire damage with your own eyes. But if there is the slightest hint of tire damage, have the tire checked or replaced because the tire damage may cause air leakage from the tire. • If the tire is damaged by driving on a rough road, off road, pothole, manhole, or curb stone, it will not be covered by the warranty. 7-44 FUSES ■ Blade type Normal Blown ■ Cartridge type Normal Blown ■ Multi fuse Blown OAEE076008 i Information Three kinds of fuses are used: blade type for lower amperage rating, cartridge type, and multi fuse for higher amperage ratings. WARNING NEVER replace a fuse with anything but another fuse of the same rating. • A higher capacity fuse could cause damage and possibly cause a fire. • Do not install a wire or aluminum foil instead of the proper fuse - even as a temporary repair. It may cause extensive wiring damage and possibly a fire. A vehicle's electrical system is protected from electrical overload damage by fuses. This vehicle has 2 (or 3) fuse panels, one located in the driver's side panel bolster, the other in the fuel cell power module compartment near the battery. 7-45 Maintenance Normal If any of your vehicle’s lights, accessories, or controls do not work, check the appropriate circuit fuse. If a fuse has blown, the element inside the fuse will be melted or broken. If the electrical system does not work, first check the driver's side fuse panel. Before replacing a blown fuse, turn the vehicle and all switches off, and then disconnect the negative battery cable. Always replace a blown fuse with one of the same rating. If the replacement fuse blows, this indicates an electrical problem. Avoid using the system involved and immediately consult an authorized HYUNDAI dealer. 7 Maintenance NOTICE Do not use a screwdriver or any other metal object to remove fuses because it may cause a short circuit and damage the system. Instrument Panel Fuse Replacement OFE078018 OFE078017 1. Turn the vehicle off. 2. Turn all other switches OFF. 3. Open the fuse panel cover. 4. Refer to the label on the inside of the fuse panel cover to locate the suspected fuse location. 7-46 5. Pull the suspected fuse straight out. Use the removal tool provided in the fuel cell power module compartment fuse panel. 6. Check the removed fuse; replace it if it is blown. Spare fuses are provided in the instrument panel fuse panels (or in the fuel cell power module compartment fuse panel). 7. Push in a new fuse of the same rating, and make sure it fits tightly in the clips. If it fits loosely, consult an authorized HYUNDAI dealer. In an emergency, if you do not have a spare fuse, use a fuse of the same rating from a circuit you may not need for operating the vehicle. If the headlights or other electrical components do not work and the fuses are OK, check the fuse panel in the fuel cell power module compartment. If a fuse is blown, it must be replaced with the same rating. Fuel cell power module compartment Panel Fuse Replacement Blade / Cartridge type 4. Check the removed fuse; replace it if it is blown. To remove or insert the fuse, use the fuse puller in the motor compartment fuse panel. 5. Push in a new fuse of the same rating, and make sure it fits tightly in the clips. If it fits loosely, consult an authorized HYUNDAI dealer. Maintenance OFE078021 1. Turn the vehicle off. 2. Turn all other switches OFF. 3. Remove the fuse panel cover by pressing the tap and pulling up. 7 7-47 Maintenance CAUTION Multi fuse i Information If the multi fuse is blown, consult an authorized HYUNDAI dealer. After checking the fuse box in the fuel cell power module compartment securely close the fuse box cover inside the motor compartment, until it clicks. If the fuse box is not closed properly, water may leak in side, possibly causing a malfunction with the electrical system. OFE078022 If the multi fuse is blown, it must be removed as follows: 1. Turn the vehicle off. 2. Disconnect the negative battery connector located on the trunk. 3. Remove the fuse panel cover by pressing the tab and pulling it up. 4. Remove the nuts shown in the picture above. 5. Replace the fuse with a new one of the same rating. 6. Reinstall in the reverse order of removal. 7-48 Fuse/Relay Panel Description Instrument panel fuse panel Maintenance OFE078024 Inside the fuse/relay box cover, you can find the fuse/relay label describing fuse/relay name and capacity. i Information Not all fuse panel descriptions in this manual may be applicable to your vehicle; the information is accurate at the time of printing. When you inspect the fuse box on your vehicle, refer to the fuse box label. 7 OFE078023N 7-49 Maintenance Instrument panel fuse panel Fuse Name Fuse Rating MEMORY1 10A Power Tail Gate Module, A/C Control Module, A/C Control Panel MODULE1 10A ICM Relay Box (Outside Mirror Folding/Unfolding Relay), A/V & Navigation Head Unit (Hazard Lamp Switch), Shift Selection Switch (SBW), Auto Light & Photo Sensor, Driver/Passenger Power Outside Mirror, Instrument Cluster TAIL GATE OPEN 10A Tail Gate Relay P/WINDOW RH 25A Power Window RH Relay P/WINDOW LH 25A Power Window LH Relay, Driver Safety Window Module P/SEAT DRV 25A Driver Seat Manual Switch MODULE4 7.5A IBU, Remote Control Smart Parking Assist Unit, VESS Unit, Electronic Parking Brake Switch, Lane Keeping Assist Unit(Line), Blind-Spot Collision Warning Unit LH/RH, Crash Pad Switch, PE Room Junction Block (Multipurpose Check Connector) MODULE8 7.5A Data Link Connector, Crash Pad Switch, Electro Chromic Mirror S/HEATER RR 20A Rear Seat Heater HEATED MIRROR 10A Driver/Passenger Power Outside Mirror, A/C Control Panel S/HEATER FRT 20A Front Air Ventilation/Seat Heater Seat Control Module 7-50 Protected Component Instrument panel fuse panel Fuse Rating Protected Component AMP 25A AMP MULTI MEDIA 15A A/V & Navigation Head Unit, Center Fascia Switch Panel MODULE5 10A Front Air Ventilation/Seat Heater Seat Control Module, AMP, A/V & Navigation Head Unit, A/C Control Panel, PTC Heater, A/C Control Module, Electro Chromic Mirror, Rear Seat Heater WIPER (RR) 15A ICM Relay Box (Rear Wiper Relay), Rear Wiper Motor DOOR LOCK 20A Door Lock Relay, Door Unlock Relay, ICM Relay Box (Two Turn Door Unlock Relay) IBU1 15A IBU BRAKE SWITCH 10A IBU, Stop Lamp Switch P/SEAT PASS 25A Passenger Seat Manual Switch A/C 7.5A A/C Control Module, Incar Temperature Sensor, A/C Control Panel, Cluster Ionizer, A/C Compressor, PE Room Junction Block (Blower Relay) AIR BAG2 10A SRS Control Module WASHER 15A Multifunction Switch Maintenance Fuse Name 7 7-51 Maintenance Instrument panel fuse panel Fuse Name Fuse Rating MDPS 7.5A MDPS Unit MODULE7 7.5A Front Air Ventilation/Seat Heater Seat Control Module, AC Inverter, Rear Seat Heater, Surround View Monitor Unit, Rear Power Outlet SUNROOF2 20A Sunroof Unit SUNROOF1 20A Sunroof Unit CLUSTER 7.5A Instrument Cluster MODULE3 7.5A SCU, Shift Selection Switch (SBW), IDC, VPD Sensor, Stop Lamp Switch, HMU, BMS Control Module START 7.5A FCU, IBU IBU2 7.5A IBU A/BAG IND 7.5A Instrument Cluster, A/C Control Panel MODULE6 7.5A IBU MODULE2 10A BMS Control Module, Wireless Charger, USB Charger LH/RH, A/V & Navigation Head Unit, Center Fascia Switch Panel, AMP, Surround View Monitor Unit, Power Outside Mirror Switch, IBU AIR BAG1 15A SRS Control Module, Passenger Occupant Detection Sensor 7-52 Protected Component Fuel cell power module compartment fuse panel Maintenance OFE078025 Inside the fuse/relay box cover, you can find the fuse/relay label describing fuse/relay name and capacity. i Information Not all fuse panel descriptions in this manual may be applicable to your vehicle; the information is accurate at the time of printing. When you inspect the fuse panel in your vehicle, refer to the fuse panel label. 7 OFE078048N 7-53 Maintenance Motor compartment fuse panel Type Fuse Name Fuse Rating Circuit Protected B+2 60A ICU Junction Block (IPS Control Module, IPS1) B+3 60A ICU Junction Block (IPS Control Module) COOLING PE PUMP 40A PE Room Coolant Pump (CPP) EPB2 40A Electronic Brake Control Module IG2 40A PE Room Junction Block (IG2 Relay) EPB1 40A Electronic Brake Control Module, PE Room Junction Block (Multipurpose Check Connector) B+4 60A ICU Junction Block (Fuse - SUNROOF1, SUNROOF2, AMP, P/SEAT DRV, P/SEAT PASS, S/HEATER FRT, P/WINDOW LH, P/WINDOW RH, TAIL GATE OPEN) IMEB 80A Electronic Brake Control Module BLOWER 50A PE Room Junction Block (Blower Relay) MDPS 80A MDPS Unit MULTI FUSE-1 MULTI FUSE-2 7-54 Motor compartment fuse panel FUSE Fuse Name Fuse Rating HVJB LV 15A HV Junction Block RCU 15A Driver / Passenger Auto Flush Door Handle Module, Rear Auto Flush Door Handle Module LH/RH FUEL DOOR OPEN 7.5A ICM Relay Box (Fuel Filler Door Relay) E-SHIFTER 40A PE Room Junction Block (E-Shifter Relay) INVERTER 30A AC Inverter REAR HEATED 40A PE Room Junction Block (Rear Heated Relay) B+1 50A ICU Junction Block ((Fuse - MODULE1, AIR BAG2, MODULE8, S/HEATER RR, DOOR LOCK, IBU1, BRAKE SWITCH), Leak Current Autocut Relay) POWER TAIL GATE 30A Power Tail Gate Module Maintenance Type Circuit Protected WIPER FRT 30A Front Wiper Motor 7 COOLING STACK PUMP 10A Stack Coolant Pump (CSP) INVERTER LV 7.5A Inverter 7-55 Maintenance Motor compartment fuse panel Type FUSE 7-56 Fuse Name Fuse Rating Circuit Protected BHDC 7.5A IDC HMU1 10A HMU BATTERY MANAGEMENT 10A BMS Control Module FUEL CELL CONTROL UNIT 15A FCU BMS FAN 15A PE Room Junction Block (BMS FAN Relay) LIGHT BULBS Consult an authorized HYUNDAI dealer to replace most vehicle light bulbs. It is difficult to replace vehicle light bulbs because other parts of the vehicle must be removed before you can get to the bulb. This is especially true for removing the headlight assembly to get to the bulb(s). Removing/installing the headlight assembly can result in damage to the vehicle. i Information • Prior to replacing a lamp, shift to P (Park), apply the parking brake, place the POWER button in the OFF position and take the key with you when leaving the vehicle to avoid sudden movement of the vehicle and to prevent possible electric shock. • Be aware the bulbs may be hot and may burn your fingers. i Information • A normally functioning lamp may flicker momentarily to stabilize the vehicle’s electrical control system. However, if the lamp goes out after flickering momentarily, or continues to flicker, have the vehicle be checked by an authorized HYUNDAI dealer. • The parking lamp may not turn on when the parking lamp switch is turned on, but the parking lamp and headlight switch may turn on when the headlight switch is turned on. This may be caused by network failure or vehicle electrical control system malfunction. If this occurs, have the vehicle be checked by an authorized HYUNDAI dealer. Maintenance The headlight and tail lamp lenses could appear frosty if the vehicle is washed after driving or the vehicle is driven at night in wet weather. This condition is caused by temperature difference between the lamp inside and outside and, it does not indicate a problem with your vehicle. When moisture condenses in the lamp, it will be removed after driving with the headlight on. The removable level may differ depending on lamp size, lamp position and environmental condition. However, if moisture is not removed, have the vehicle is inspected by an authorized HYUNDAI dealer. WARNING 7 7-57 Maintenance Headlight, front center lamp, turn signal lamp, daytime running lamp, parking lamp, side marker replacement Your vehicle is equipped with LED lamps. LED lamps do not have replaceable bulbs. If the LED lamp does not operate, have the vehicle checked by an authorized HYUNDAI dealer. Side Repeater Lamp Replacement i Information The headlight aiming should be adjusted after an accident or after the headlight assembly is reinstalled at an authorized HYUNDAI dealer. OFE078029 OFE078028N (1) Headlight (Low/High) (2) Front center lamp (3) Turn signal/daytime lamp/parking lamp (4) Side marker 7-58 running Your vehicle is equipped with LED lamps. LED lamps do not have replaceable bulbs. If the LED lamp does not operate, have the vehicle checked by an authorized HYUNDAI dealer. Rear Combination Light Bulb Replacement Stop lamp, tail lamp, turn signal lamp, backup lamp and side marker High mounted stop lamp Your vehicle is equipped with LED lamps. LED lamps do not have replaceable bulbs. If the LED lamp does not operate, have the vehicle checked by an authorized HYUNDAI dealer. OFE078031 (1) Turn signal lamp/stop lamp (2) Turn signal lamp/stop lamp (3) Tail lamp (4) Backup lamp (5) Side marker If the high mounted stop lamp does not operate, have the vehicle checked by an authorized HYUNDAI dealer. Maintenance OFE078040N 7 7-59 Maintenance License Plate Light Bulb Replacement Interior Light Bulb Replacement Map lamp, room lamp and luggage compartment lamp ■ Map lamp ■ Room lamp (Type B) OFE078032 OFE078033 1. Using a flat-blade screwdriver, gently pry the lens cover from the lamp housing. 2. Remove the bulb by pulling it straight out. 3. Install a new bulb. 4. Reinstall in the reverse order. ■ Room lamp (Type A) OFE078034 ■ Luggage compartment lamp OAEE076027 OFE078036 Your vehicle is equipped with LED lamps. LED lamps do not have replaceable bulbs. If the LED lamp does not operate, have the vehicle checked by an authorized HYUNDAI dealer. 7-60 Vanity mirror lamp and glove box lamp ■ Vanity mirror lamp 1. Using a flat-blade screwdriver, gently pry the lens from the interior lamp housing. 2. Remove the bulb by pulling it straight out. WARNING OFE078035 Prior to working on the Interior Lights, ensure that the lamp is off to avoid burning your fingers or receiving an electric shock. Maintenance ■ Glove box lamp 3. Install a new bulb in the socket. 4. Align the lens tabs with the interior lamp housing notches and snap the lens into place. 7 NOTICE Use care not to dirty or damage lens, lens tab, and plastic housings. OFE078037 7-61 Maintenance APPEARANCE CARE Exterior Care Exterior general caution Protecting your vehicle’s finish Washing It is very important to follow the label directions when using any chemical cleaner or polish. Read all warning and caution statements that appear on the label. To help protect your vehicle’s finish from rust and deterioration, wash it thoroughly and frequently at least once a month with lukewarm or cold water. If you use your vehicle for off-road driving, you should wash it after each off-road trip. Pay special attention to the removal of any accumulation of salt, dirt, mud, and other foreign materials. Make sure the drain holes in the lower edges of the doors and rocker panels are kept clear and clean. Insects, tar, tree sap, bird droppings, industrial pollution and similar deposits can damage your vehicle’s finish if not removed immediately. Even prompt washing with plain water may not completely remove all these deposits. A mild soap, safe for use on painted surfaces, should be used. High-pressure washing • When using high-pressure washers, make sure to maintain sufficient distance from the vehicle. Insufficient clearance or excessive pressure can lead to component damage or water penetration. • Do not spray the camera, sensors or its surrounding area directly with a high pressure washer. Shock applied from high pressure water may cause the device to not operate normally. • Do not bring the nozzle tip close to boots (rubber or plastic covers)or connectors as they may be damaged if they come into contact with high pressure water. • Do not use any high-pressure nozzles, which induce either one-direct water stream or water swirling. 7-62 After washing, rinse the vehicle thoroughly with lukewarm or cold water. Do not allow soap to dry on the finish. WARNING After washing the vehicle, test the brakes while driving slowly to see if they have been affected by water before getting on the road. If braking performance is impaired, dry the brakes by applying them lightly while maintaining a slow forward speed. NOTICE OFE078045N NOTICE • Water washing in the fuel cell power module compartment including high pressure water washing may cause the failure of electrical circuits located in the fuel cell power module compartment. • Never allow water or other liquids to come in contact with electrical/electronic components inside the vehicle as this may damage them. Matte paint finish vehicle Automatic car wash which uses rotating brushes should not be used as this can damage the surface of your vehicle. A steam cleaner which washes the vehicle surface at high temperature may result the oil to adhere and leave stains that is difficult to remove. Use a soft cloth (for example, microfiber towel or sponge) when washing your vehicle and dry with a microfiber towel. When you hand wash your vehicle, you should not use a cleaner that finishes with wax. If the vehicle surface is too dirty (sand, dirt, dust, contaminant, etc.), clean the surface with water before washing the car. 7-63 Maintenance • Do not use strong soap, chemical detergents or hot water, and do not wash the vehicle in direct sunlight or when the body of the vehicle is warm. • Be careful when washing the side windows of your vehicle. Especially, with high-pressure water, water may leak through the windows and wet the interior. • To prevent damage to the plastic parts, do not clean with chemical solvents or strong detergents. NOTICE 7 Maintenance Waxing A good coat of wax provides a barrier between your paint and environmental contamination. Keeping a good coat of wax on your vehicle will help protect it. Wax the vehicle when water will no longer bead on the paint. Always wash and dry the vehicle before waxing. Use a good quality liquid or paste wax, and follow the manufacturer’s instructions. Wax all metal trim to protect it and to maintain its luster. Removing oil, tar, and similar materials with a spot remover will usually strip the wax from the finish. Be sure to re-wax these areas even if the rest of the vehicle does not yet need waxing. 7-64 NOTICE • Wiping dust or dirt off the body with a dry cloth will scratch the finish. • Do not use steel wool, abrasive cleaners, or strong detergents containing highly alkaline or caustic agents on chrome-plated or anodized aluminum parts. This may result in damage to the protective coating and cause discoloration or paint deterioration. Repairing your vehicle’s finish Deep scratches or stone chips in the painted surface must be repaired promptly. Exposed metal will quickly rust and may develop into a major repair expense. NOTICE If your vehicle is damaged and requires any metal repair or replacement, be sure the body shop applies anti-corrosion materials to the parts repaired or replaced. NOTICE Matte paint finish vehicle Do not use any polish protector such as a detergent, an abrasive and a polish. In case wax is applied, remove the wax immediately using a silicon remover and if any tar or tar contaminant is on the surface use a tar remover to clean. However, be careful not to apply too much pressure on the painted area. NOTICE Matte paint finish vehicle In case of matte paint finish vehicles, it is impossible to modify only the damaged area and repair of the whole part is necessary. If the vehicle is damaged and painting is required, have your vehicle maintained and repaired by an authorized HYUNDAI dealer. Take extreme care, as it is difficult to restore the quality after the repair. Bright-metal maintenance Underbody maintenance Corrosive materials used for ice and snow removal and dust control may collect on the underbody. If these materials are not removed, accelerated rusting can occur on underbody parts such as the fuel lines, frame, floor pan and exhaust system, even though they have been treated with rust protection. WARNING After washing the vehicle, test the brakes while driving slowly to see if they have been affected by water. If braking performance is impaired, dry the brakes by applying them lightly while maintaining a slow forward speed. Aluminum wheel maintenance The aluminum wheels are coated with a clear protective finish. NOTICE • Do not use abrasive cleaner, polishing compound, solvent, or wire brushes on aluminum wheels. • Clean the wheel when it has cooled. • Use only a mild soap or neutral detergent, and rinse thoroughly with water. Also, clean the wheels after driving on salted roads. • Do not wash the wheels with high-speed car wash brushes. • Do not use any cleaners containing acid or alkaline detergents. 7-65 Maintenance • To remove road tar and insects, use a tar remover, not a scraper or other sharp object. • To protect the surfaces of brightmetal parts from corrosion, apply a coating of wax or chrome preservative and rub to a high luster. • During winter weather or in coastal areas, cover the bright metal parts with a heavier coating of wax or preservative. If necessary, coat the parts with non-corrosive petroleum jelly or other protective compound. Thoroughly flush the vehicle underbody and wheel openings with lukewarm or cold water once a month, after off-road driving and at the end of each winter. Pay special attention to these areas because it is difficult to see all the mud and dirt. It will do more harm than good to wet down the road grime without removing it. The lower edges of doors, rocker panels, and frame members have drain holes that should not be allowed to clog with dirt; trapped water in these areas can cause rusting. 7 Maintenance Corrosion protection Protecting your vehicle from corrosion By using the most advanced design and construction practices to combat corrosion, HYUNDAI produces cars of the highest quality. However, this is only part of the job. To achieve the long-term corrosion resistance your vehicle can deliver, the owner’s cooperation and assistance is also required. Common causes of corrosion The most common causes of corrosion on your vehicle are: • Road salt, dirt and moisture that is allowed to accumulate underneath the vehicle. • Removal of paint or protective coatings by stones, gravel, abrasion or minor scrapes and dents which leave unprotected metal exposed to corrosion. 7-66 High-corrosion areas If you live in an area where your vehicle is regularly exposed to corrosive materials, corrosion protection is particularly important. Some of the common causes of accelerated corrosion are road salts, dust control chemicals, ocean air and industrial pollution. Moisture breeds corrosion Moisture creates the conditions in which corrosion is most likely to occur. For example, corrosion is accelerated by high humidity, particularly when temperatures are just above freezing. In such conditions, the corrosive material is kept in contact with the car surfaces by moisture that is slow to evaporate. Mud is particularly corrosive because it is slow to dry and holds moisture in contact with the vehicle. Although the mud appears to be dry, it can still retain the moisture and promote corrosion. High temperatures can also accelerate corrosion of parts that are not properly ventilated so the moisture can be dispersed. For all these reasons, it is particularly important to keep your vehicle clean and free of mud or accumulations of other materials. This applies not only to the visible surfaces but particularly to the underside of the vehicle. To help prevent corrosion Keep your car clean The best way to prevent corrosion is to keep your vehicle clean and free of corrosive materials. Attention to the underside of the vehicle is particularly important. • If you live in a high-corrosion area, (where road salts are used, near the ocean, areas with industrial pollution, acid rain, etc.), you should take extra care to prevent corrosion. In winter, hose off the underside of your vehicle at least once a month and be sure to clean the underside thoroughly when winter is over. Keep your garage dry Don’t park your car in a damp, poorly ventilated garage. This creates a favorable environment for corrosion. This is particularly true if you wash your vehicle in the garage or drive it into the garage when it is still wet or covered with snow, ice or mud. Even a heated garage can contribute to corrosion unless it is well ventilated so moisture is dispersed. Keep paint and trim in good condition Scratches or chips in the finish should be covered with "touch-up" paint as soon as possible to reduce the possibility of corrosion. If bare metal is showing through, the attention of a qualified body and paint shop is recommended. Bird droppings are highly corrosive and may damage painted surfaces in just a few hours. Always remove bird droppings as soon as possible. Interior Care Interior general precautions Prevent caustic solutions such as perfume and cosmetic oil, from contacting the interior parts because they may cause damage or discoloration. If they do contact the interior parts, wipe them off immediately. See the instructions for the proper way to clean vehicle interior surfaces. NOTICE • Never allow water or other liquids to come in contact with electrical/electronic components inside the vehicle as this may damage them. • When cleaning leather products (steering wheel, seats etc.), use neutral detergents or low alcohol content solutions. If you use high alcohol content solutions or acid/alkaline detergents, the color of the leather may fade or the surface may get stripped off. 7-67 Maintenance • When cleaning underneath the vehicle, pay particular attention to the components under the fenders and other areas that are hidden from view. Do a thorough job; just dampening the accumulated mud rather than washing it away will accelerate corrosion rather than prevent it. Water under high pressure and steam are particularly effective in removing accumulated mud and corrosive materials. • When cleaning lower door panels, rocker panels and frame members, be sure that drain holes are kept open so that moisture can escape and not be trapped inside to accelerate corrosion. 7 Maintenance Cleaning the upholstery and interior trim Vehicle interior surfaces (if equipped) Remove dust and loose dirt from interior surfaces with a whisk broom or a vacuum cleaner. If necessary, clean interior surfaces with a mixture of warm water and mild non-detergent cleaner (test all cleaners on a concealed area before use). Fabric (if equipped) Remove dust and loose dirt from fabric with a whisk broom or vacuum cleaner. Clean with a mild soap solution recommended for upholstery or carpets. Remove fresh spots immediately with a fabric spot cleaner. If fresh spots do not receive immediate attention, the fabric can be stained and its color can be affected. Also, its fire-resistant properties can be reduced if the material is not properly maintained. 7-68 NOTICE Using anything but recommended cleaners and procedures may affect the fabric's appearance and fire-resistant properties. Leather (if equipped) • Feature of Seat Leather - Leather is made from the outer skin of an animal, which goes through a special process to be available for use. Since it is a natural object, each part differs in thickness or density. Wrinkles may appear as a natural result of stretching and shrinking depending on the temperature and humidity. - The seat is made of stretchable fabric to improve comfort. - The parts contacting the body are curved and the side supporting area is high which provides driving comfort and stability. - Wrinkles may appear naturally from usage. It is not a fault of the products. CAUTION • Wrinkles or abrasions which appear naturally from usage are not covered by warranty. • Belts with metallic accessories, zippers or keys inside the back pocket may damage the seat fabric. • Make sure not to wet the seat. It may change the nature of natural leather. • Jeans or clothes which could bleach may contaminate the surface of the seat covering fabric. • Cleaning the leather seats - Remove all contaminations instantly. Refer to instructions below for removal of each contaminant. - Cosmetic products (sunscreen, foundation, etc.) Apply cleansing cream on a cloth and wipe the contaminate spot. Wipe off the cream with a wet cloth and remove water with a dry cloth. - Beverages (coffee, soft drink, etc.) Apply a small amount of neutral detergent and wipe until contaminations do not smear. - Oil Remove oil instantly with absorbable cloth and wipe with stain remover used only for natural leather. - Chewing gum Harden the gum with ice and remove gradually. Cleaning the seat belt webbing Clean the belt webbing with any mild soap solution recommended for cleaning upholstery or carpet. Follow the instructions provided with the soap. Do not bleach or re-dye the webbing because this may weaken the seat belt. Cleaning the interior window glass If the interior glass surfaces of the vehicle become fogged (that is, covered with an oily, greasy or waxy film), they should be cleaned with glass cleaner. Follow the directions on the glass cleaner container. NOTICE Do not scrape or scratch the inside of the rear window. This may result in damage to the rear window defroster grid. 7-69 Maintenance • Caring for the leather seats - Vacuum the seat periodically to remove dust and sand on the seat. It will prevent abrasion or damage of the leather and maintain its quality. - Wipe the natural leather seat cover often with dry or soft cloth. - Use of proper leather protective may prevent abrasion of the cover and helps maintain the color. Be sure to read the instructions and consult a specialist when using leather coating or protective agent. - Light colored (beige, cream beige) leather is easily contaminated and the stain is noticeable. Clean the seats frequently. - Avoid wiping with wet cloth. It may cause the surface to crack. 7 Maintenance CALIFORNIA PERCHLORATE NOTICE Perchlorate Material-special handling may apply, See: https://dtsc.ca.gov/perchlorate Notice to California Vehicle Dismantlers: Perchlorate containing materials, such as air bag inflators, seatbelt pretensioners and keyless remote entry batteries, must be disposed of according to Title 22 California Code of Regulations Section 67384.10 (a). 7-70 Specifications, Consumer information and Reporting safety defects Specifications & Consumer information Dimensions ..............................................................8-2 Bulb Wattage ..........................................................8-3 Tires and Wheels ...................................................8-4 Volume and Weight................................................8-5 Air Conditioning System........................................8-5 Recommended Lubricants and Capacities ..........8-6 Vehicle Identification Number (VIN) ...................8-7 Vehicle Certification Label....................................8-7 Tire Specification and Pressure Label................8-8 Motor Number ........................................................8-8 Consumer Information...........................................8-9 Reporting Safety Defects ...................................8-10 8 Specifications, Consumer information and Reporting safety defects DIMENSIONS Items in (mm) Overall length 183.86 (4,670) Overall width 73.23 (1,860) Overall height Without roof side rails : 64.17 (1,630) With roof side rails : 64.57 (1,640) Front tread Rear tread Wheelbase 8-2 225/60 R17 63.70 (1,618) 245/45 R19 63.54 (1,614) 225/60 R17 64.13 (1,629) 245/45 R19 63.98 (1,625) 109.84 (2,790) Specifications, Consumer information and Reporting safety defects BULB WATTAGE Front Light Bulb Headlight Turn signal lamp Front center lamp Parking lamp Daytime running lamp (DRL) Side Repeater lamp (Outside mirror) Side marker Rear combination lamp Rear Interior High mounted stop lamp License plate lamp Map lamp Room lamp Vanity mirror lamp Luggage compartment lamp Glove box lamp Low/High Stop Tail Turn signal Back up Side marker Bulb Type LED LED LED LED LED LED LED LED LED LED LED LED LED W5W LED LED FESTOON LED FESTOON Wattage LED LED LED LED LED LED LED LED LED LED LED LED LED 5 LED LED 5 LED 5 8 8-3 Specifications, Consumer information and Reporting safety defects TIRES AND WHEELS Inflation Pressure kPa (psi) Items Full size tire Tire Size Wheel Size 225/60 R17 7.0J X 17 245/45 R19 7.5J X 19 Normal Load * 1 Maximum Load * 2 Front Rear Front Rear 250 (36) 250 (36) 250 (36) 250 (36) Wheel Lug Nut Torque kgf•m (lbf•ft, N•m) 11~13 (79~94, 07~127) *1: Normal load : Up to 3 persons *2: Maximum load : Up to 5 persons If your vehicle is not equipped with a compact spare tire, your vehicle will be equipped with a Tire Mobility Kit. NOTICE • It is permissible to add 3 psi to the standard tire pressure specification if colder temperatures are expected soon. Tires typically loose 1psi (7kPa) for every 12°F temperature drop. If extreme temperature variations are expected, recheck your tire pressure as necessary to keep them properly inflated. • An air pressure generally decreases, as you drive up to a high-altitude area above sea level. Thus, if you plan to drive a high-altitude area, check the tire pressures in advance. If necessary, inflate them to a proper level. (Air inflation per altitude : +2.4 psi/1 mile) CAUTION When replacing tires, use the same size originally supplied with the vehicle. Using tires of a different size can damage the drivetrain, cause driveability issues, and possibly cause damage. 8-4 Specifications, Consumer information and Reporting safety defects VOLUME AND WEIGHT Luggage Volume Gross Vehicle Weight lbs. (kg) 5,159 (2,340) cu ft (l) Min. Max. 16.28(461) 51.77 (1,466) Weight of Volume Classification 20.28±0.88 (575±25) R-1234yf 4.59±0.35 (130±10) POE AIR CONDITIONING SYSTEM Items Refrigerant oz. (g) Compressor lubricant oz. (cc) Contact an authorized HYUNDAI dealer for more details. 8 8-5 Specifications, Consumer information and Reporting safety defects RECOMMENDED LUBRICANTS AND CAPACITIES To help achieve proper vehicle performance and durability, use only lubricants of the proper quality. These lubricants and fluids are recommended for use in your vehicle. Lubricant Volume 1.06 US qt (1 l) Reduction gear fluid Classification GL4 75W/85, TGO-9 Fuel cell stack Coolant We recommend that you consult an authorized Hyundai dealer. Traction motor Brake fluid Fuel 8-6 Amount required SAE J1704 DOT-4LV, FMVSS116 DOT-4, ISO4925 CLASS-6 165.48 US qt. (156.6 l) Hydrogen (SAE J2719 or ISO 14687-2) ■ Frame number VEHICLE CERTIFICATION LABEL ■ VIN label (if equipped) OFE088001 OFE088005L The vehicle identification number (VIN) is the number used in registering your car and in all legal matters pertaining to its ownership, etc. The number is punched on the floor under the passenger seat. To check the number, open the cover. The VIN is also on a plate attached to the top of the dashboard. The number on the plate can easily be seen through the windshield from outside. OFE088002 The vehicle certification label attached on the driver's side center pillar gives the Vehicle Identification Number (VIN). Specifications, Consumer information and Reporting safety defects VEHICLE IDENTIFICATION NUMBER (VIN) 8 8-7 Specifications, Consumer information and Reporting safety defects TIRE SPECIFICATION AND PRESSURE LABEL TRACTION MOTOR NUMBER OFE088004N OFE088003 The tires supplied on your new vehicle are chosen to provide the best performance for normal driving. The tire label located on the driver’s side center pillar gives the tire pressures recommended for your car. 8-8 The motor number can be seen from under the vehicle. HYUNDAI Customer Care P.O. Box 20850 Fountain Valley, CA 92728 800-633-5151 [email protected] Hyundai’s Customer Care Center representatives are available Monday through Friday, between the hours of 6:00 AM and 5:00 PM PST and Saturday between 6:30 AM and 3:00 PM PST (English). For Customer Care assistance in Spanish or Korean, representatives are available Monday through Friday between 6:30 AM and 3:00 PM PST. Specifications, Consumer information and Reporting safety defects CONSUMER INFORMATION This consumer information has been prepared in accordance with regulations issued by the National Highway Traffic Safety Administration of the U.S. Department of Transportation. Your HYUNDAI dealer will help answer any questions you may have as you read this information. HYUNDAI motor vehicles are designed and manufactured to meet or exceed all applicable safety standards. For your safety, however, we strongly urge you to read and follow all directions in this Owner’s Manual, particularly the information under the headings "NOTICE", "CAUTION" and "WARNING". If, after reading this manual, you have any questions regarding the operation of your vehicle, please contact the Hyundai Customer Care Center: 8 8-9 Specifications, Consumer information and Reporting safety defects REPORTING SAFETY DEFECTS If you believe that your vehicle has a defect which could cause a crash or could cause injury or death, you should immediately inform the National Highway Traffic Safety Administration (NHTSA) in addition to notifying HYUNDAI MOTOR AMERICA. To contact NHTSA, you may call the Vehicle Safety Hotline toll-free at 1-888- 327-4236 (TTY: 1-800-424-9153); go to http://www.safercar.gov; download the SaferCar mobile application; or write to: Administrator, NHTSA 1200 New Jersey Ave, SE., West Building Washington, D.C. 20590. You can also obtain other information about motor vehicle safety from http://www.safercar.gov. If NHTSA receives similar complaints, it may open an investigation, and if it finds that a safety defect exists in a group of vehicles, it may order a recall and remedy campaign. However, NHTSA cannot become involved in individual problems between you, your dealer, or HYUNDAI MOTOR AMERICA. 8-10 Index I Index 12V battery......................................................................7-27 Battery recharging ......................................................7-28 Reset Features ............................................................7-28 A AC Inverter ...................................................................3-169 Accessing Your Vehicle ....................................................3-3 Smart Key.....................................................................3-3 Immobilizer System ...................................................3-10 Active Hood Lift System ................................................2-70 System activation .......................................................2-70 System limitation........................................................2-71 System malfunction....................................................2-72 Air Bag - Advanced Supplemental Restraint System.....2-47 Where Are the Air Bags? ...........................................2-49 How Does the Air Bag System Operate?...................2-52 What to Expect After an Air Bag Inflates..................2-57 Occupant Classification System (OCS) .....................2-58 Why Didn't My Air Bag Go Off in a Collision?........2-60 SRS Care ....................................................................2-60 Additional Safety Precautions....................................2-60 Air Bag Warning Labels.............................................2-60 Why Didn't My Air Bag Go Off in a Collision?........2-63 SRS Care ....................................................................2-68 Additional Safety Precautions....................................2-69 Air Bag Warning Labels.............................................2-69 I-2 Air Bag Warning Labels .................................................2-69 Air cleaner.......................................................................7-20 Filter Replacement .....................................................7-20 Air Conditioning System ..................................................8-5 Anti-lock Brake System (ABS) ......................................5-29 Appearance care..............................................................7-62 Exterior Care ..............................................................7-62 Interior Care ...............................................................7-67 Auto Hold .......................................................................5-25 Automatic Climate Control System..............................3-149 Automatic Temperature Control Mode ....................3-150 Manual Temperature Control Mode.........................3-150 System Operation .....................................................3-156 System Maintenance ................................................3-158 B Before Driving ..................................................................5-4 Before Entering the Vehicle .........................................5-4 Before Starting .............................................................5-4 Blind-Spot Collision Warning/ Blind-Spot Collision-avoidance Assist........................5-53 System Description ....................................................5-53 System Setting and Activation ...................................5-54 Warning and System Control .....................................5-57 Detecting Sensor (Front View Camera and Rear Corner Radar) .................................................5-59 Limitations of the System ..........................................5-62 Blind-Spot View Monitor System ..................................5-77 Operating conditions ..................................................5-77 Blind-Spot View Monitor system warning ................5-78 Brake fluid ......................................................................7-19 Checking the Brake Fluid Level ................................7-19 Braking System...............................................................5-18 Power Brakes..............................................................5-18 Disc Brake Wear Indicator .........................................5-19 Electronic Parking Brake (EPB) ................................5-19 Auto Hold ...................................................................5-25 Anti-lock Brake System (ABS)..................................5-29 Electronic Stability Control (ESC).............................5-31 Vehicle Stability Management (VSM) .......................5-34 Hill-Start Assist Control (HAC).................................5-36 Good Braking Practices..............................................5-36 Bulb Wattage.....................................................................8-3 C D Declaration of conformity ............................................5-115 Device cooling coolant ...................................................7-13 Checking the Coolant Level.......................................7-13 Changing Coolant.......................................................7-15 Dimensions .......................................................................8-2 Disc Brake Wear Indicator..............................................5-19 Door Locks......................................................................3-11 Door unlocking from outside the vehicle...................3-11 Door locking from outside the vehicle.......................3-14 Operating Door Locks from Inside the Vehicle .........3-14 Automatic Door Lock and Unlock Features ..............3-17 Child-Protector Rear Door Locks ..............................3-18 Drive Mode Integrated Control System .........................5-37 Drive mode change alert ............................................5-38 ECO mode climate control.........................................5-38 I-3 Index California perchlorate notice ..........................................7-70 Cargo Security Screen ..................................................3-176 Center Console Storage ................................................3-165 Child Restraint System (CRS) ........................................2-36 Children Always in the Rear ......................................2-36 Selecting a Child Restraint System (CRS).................2-37 Installing a Child Restraint System (CRS) ................2-39 Child-Protector Rear Door Locks...................................3-18 Climate Control Additional Features ............................3-164 Automatic Ventilation...............................................3-164 Sunroof Inside Air Recirculation .............................3-164 Climate control air filter .................................................7-22 Filter Inspection..........................................................7-22 Clock .............................................................................3-171 Coat Hook .....................................................................3-172 Consumer Information......................................................8-9 Cup Holder....................................................................3-166 Customer Q&A Guide (FCEV).......................................H30 I Index Driver Assist System.....................................................3-107 Parking Distance Warning (Reverse/Forward) System ...................................................................3-107 Rear View Monitor ...................................................3-111 Surround View Monitoring ......................................3-112 Driver Attention Warning (DAW) System......................5-94 System Setting and Activation ...................................5-94 Resetting the System ..................................................5-95 System Standby ..........................................................5-96 System Malfunction ...................................................5-96 E Electric Power Steering (EPS)........................................3-20 Electronic Parking Brake (EPB).....................................5-19 Electronic Stability Control (ESC) .................................5-31 Emergency Fuel Filler Door Release..............................3-57 Explanation of scheduled maintenance items.................7-12 Exterior Care...................................................................7-62 Exterior Features.............................................................3-42 Hood ...........................................................................3-42 Non-Powered Liftgate ................................................3-43 Power Liftgate ............................................................3-45 Smart Liftgate.............................................................3-51 Fuel Filler Door..........................................................3-55 Emergency Fuel Filler Door Release .........................3-57 I-4 Exterior Features...........................................................3-178 Roof Side Rails ........................................................3-178 Exterior Lights ................................................................3-91 Exterior Overview.............................................................1-2 F Features of FCEV............................................................H10 How to Start the Vehicle.............................................H10 How to Stop the Vehicle .............................................H11 Virtual Engine Sound System.....................................H11 Fuel filler door ............................................................H12 Warning and indicator lights.......................................H15 LCD Display Messages ..............................................H16 FCEV mode ................................................................H21 When the high voltage battery is weak ......................H25 If the 12 volt battery is discharged .............................H25 Emergency while driving............................................H26 Floor Mat Anchor(s) .....................................................3-174 Forward Collision-avoidance Assist (FCA) System.......5-39 System Setting and Activation ...................................5-39 FCA Warning Message and System Control..............5-41 FCA Sensor (Front Radar/Front View Camera).........5-44 System Malfunction ...................................................5-46 Limitations of the System ..........................................5-47 Front Seats ........................................................................2-6 Front Windshield Washers ............................................3-104 Front Windshield Wipers ..............................................3-103 Fuel Cell Power Module Compartment............................1-6 Fuel cell power module compartment ..............................7-3 Fuel Filler Door ..............................................................3-55 Fuel cell stack....................................................................H4 Fuses ...............................................................................7-45 Instrument Panel Fuse Replacement ..........................7-46 Fuel cell power module compartment Panel Fuse Replacement .........................................7-47 Fuse/Relay Panel Description ....................................7-49 G Glove Box .....................................................................3-165 Good Braking Practices ..................................................5-36 H If the 12 Volt Battery is Discharged .................................6-5 Before Jump Starting....................................................6-5 Jump Starting................................................................6-6 If the Vehicle Overheats....................................................6-9 If the Vehicle Will Not Start .............................................6-4 If You Have a Flat Tire (With Tire Mobility Kit)...........6-17 Important Safety Precautions............................................2-2 Always Wear Your Seat Belt ........................................2-2 Restrain All Children....................................................2-2 Air Bag Hazards ...........................................................2-2 Driver Distraction.........................................................2-2 Control Your Speed ......................................................2-3 Keep Your Vehicle in Safe Condition ..........................2-3 In Case of an Emergency While Driving .........................6-2 If an accident occurs.....................................................6-2 If a fire occurs ..............................................................6-3 Emergency venting of hydrogen gas............................6-3 If a submersion in water occurs ...................................6-3 If the vehicle stalls at a crossroad or crossing .............6-3 If you have a flat tire while driving .............................6-4 If the vehicle stalls while driving.................................6-4 Index Hazard Warning Flasher ...................................................6-2 Head Restraints ...............................................................2-13 Heated Steering Wheel ...................................................3-22 High pressure hydrogen storage tanks ..............................H5 Hill-Start Assist Control (HAC) .....................................5-36 Hood................................................................................3-42 Horn ................................................................................3-21 H20 OUT ........................................................................3-89 CSD (Cold Shut-Down) .............................................3-90 I I I-5 Index Infotainment system..........................................................4-2 USB and iPod® port .....................................................4-2 Antenna ........................................................................4-2 Steering wheel audio controls ......................................4-3 Bluetooth® Wireless Technology..................................4-4 Audio/Video/Navigation system ..................................4-4 Inside Rearview Mirror...................................................3-23 Instrument Cluster...........................................................3-58 Instrument Cluster Control.........................................3-59 Gauges and Meters .....................................................3-59 Warning and Indicator Lights.....................................3-65 LCD Display Messages..............................................3-76 Instrument Panel Overview ..............................................1-5 Interior Care ....................................................................7-67 Interior Features ............................................................3-166 Cup Holder ...............................................................3-166 Sunvisor....................................................................3-167 Power Outlet.............................................................3-168 AC Inverter...............................................................3-169 USB Charger ............................................................3-171 Wireless Cellular Phone Charging System ..............3-171 Clock ........................................................................3-173 Coat Hook ................................................................3-174 Floor Mat Anchor(s).................................................3-174 Luggage Net Holder .................................................3-175 Cargo Security Screen..............................................3-176 Interior Overview..............................................................1-4 Introduction of FCEV .......................................................H2 I-6 L Lane Following Assist (LFA) System ............................5-87 LFA operation.............................................................5-88 Warning message........................................................5-90 Limitations of the system ...........................................5-92 Lane Keeping Assist (LKA) System ..............................5-79 LKA System Operation ..............................................5-80 Warning Light and Message.......................................5-83 Limitations of the System ..........................................5-85 LKA System Function Change ..................................5-86 LCD Display ...................................................................3-81 LCD Display Control .................................................3-81 LCD Display Modes ..................................................3-82 LCD Display Messages (FCEV).....................................H16 Leading Vehicle Departure Alert ..................................5-116 System Setting and Activation .................................5-116 Light bulbs ......................................................................7-57 Headlight, front center lamp, turn signal lamp, daytime running lamp, parking lamp, side marker replacement .........................................7-58 Side Repeater Lamp Replacement .............................7-58 Rear Combination Light Bulb Replacement..............7-59 High mounted stop lamp ............................................7-59 License Plate Light Bulb Replacement......................7-60 Interior Light Bulb Replacement ...............................7-60 Lighting...........................................................................3-91 Exterior Lights............................................................3-91 Welcome System ......................................................3-101 Luggage Net Holder .....................................................3-174 M Maintenance services ........................................................7-4 Owner's Responsibility.................................................7-4 Owner Maintenance Precautions..................................7-4 Mirrors ............................................................................3-23 Inside Rearview Mirror ..............................................3-23 Side View Mirrors ......................................................3-31 Motor Number ..................................................................8-8 N Non-Powered Liftgate.....................................................3-43 O Paddle Shifter (Regenerative Braking Control) .............5-17 Parking Distance Warning (Reverse/Forward) System .......................................................................3-107 Power Brakes ..................................................................5-18 Power Button ....................................................................5-6 POWER Button Positions ............................................5-7 Starting the Vehicle ......................................................5-9 Turning Off the Vehicle..............................................5-10 Power Liftgate.................................................................3-45 Power Outlet .................................................................3-168 R Rear Cross-traffic Collision Warning (RCCW)/ Rear Cross-traffic Collision-avoidance Assist (RCCA)........................................................................5-67 System Description ....................................................5-67 System Setting and Activation ...................................5-68 Warning and System Control .....................................5-69 Limitations of the System ..........................................5-73 Index Occupant Classification System (OCS)..........................2-58 Owner maintenance ..........................................................7-5 Owner maintenance schedule.......................................7-6 P I I-7 Index Rear Seats .......................................................................2-10 Rear View Monitor........................................................3-111 Rear Window Wiper and Washer..................................3-106 Recommended Lubricants and Capacities........................8-6 Reducing the Risk of a Rollover ..................................5-121 Reduction Gear ...............................................................5-11 Reduction Gear Operation..........................................5-11 Parking........................................................................5-13 LCD Display Messages..............................................5-13 Good Driving Practices ..............................................5-16 Remote Smart Parking Assist (RSPA) ..........................3-115 Operating Condition .................................................3-116 Non-operating Condition..........................................3-117 Limitations of the System ........................................3-118 How the System Works (Smart Parking) .................3-122 How the System Works (Remote Smart Parking)....3-129 How the System Works (Smart Exit) .......................3-133 How the System Works (Remote Moving Forward/Backward)..................3-140 Additional Instructions (Messages)..........................3-145 Turn signal Showing Vehicle Status while System in Activation..........................................................3-146 Smart Key Showing Vehicle Status while System in Activation..........................................................3-147 Link with other Systems ..........................................3-148 Reporting Safety Defects ................................................8-10 Roof Side Rails .............................................................3-178 I-8 S Scheduled maintenance services.......................................7-7 Normal Maintenance Schedule ....................................7-8 Maintenance Under Severe Usage Conditions...........7-10 Seat Belt Restraint System .............................................2-24 Seat Belt Warning Light .................................................2-22 Seat Belts ........................................................................2-21 Seat Belt Safety Precautions ......................................2-21 Seat Belt Warning Light.............................................2-22 Seat Belt Restraint System .........................................2-24 Additional Seat Belt Safety Precautions ....................2-32 Care of Seat Belts.......................................................2-35 Seat Warmers and Air Ventilation Seats .........................2-17 Seats ..................................................................................2-4 Safety Precautions ........................................................2-5 Front Seats....................................................................2-6 Rear Seats ...................................................................2-10 Head Restraints ..........................................................2-13 Seat Warmers and Air Ventilation Seats.....................2-17 Side View Mirrors...........................................................3-31 Smart Cruise Control With Stop & Go System..............5-98 Smart Cruise Control Switch .....................................5-99 To Adjust the Sensitivity of Smart Cruise Control ..5-100 To Convert to Cruise Control Mode ........................5-100 Smart Cruise Control Speed.....................................5-101 Sunroof............................................................................3-37 Automatic Reversal ....................................................3-39 Sunshade.....................................................................3-37 Sunroof Open Warning...............................................3-41 Slide open/close..........................................................3-39 Tilt Open/Close ..........................................................3-38 Resetting the sunroof..................................................3-41 Sunvisor ........................................................................3-166 Surround View Monitoring ...........................................3-112 T The components of FCEV.................................................H3 FCEV system module ...................................................H4 High pressure hydrogen storage tanks..........................H5 Battery system ..............................................................H5 Theft-Alarm System .......................................................3-19 Tilt Steering/Telescope Steering .....................................3-21 Tire Pressure Monitoring System (TPMS) .....................6-11 Check Tire Pressure....................................................6-11 Tire Pressure Monitoring System...............................6-12 Low Tire Pressure Telltale..........................................6-13 Low Tire Pressure LCD Display with Position Indicator ..................................................................6-13 TPMS Malfunction Indicator .....................................6-14 Changing a Tire with TPMS ......................................6-15 Tire Specification and Pressure Label ..............................8-8 I-9 Index Smart Cruise Control Vehicle-to-Vehicle Distance..5-105 Sensor to Detect Distance to the Vehicle Ahead......5-108 Limitations of the System ........................................5-110 Smart Key .........................................................................3-3 Smart Liftgate .................................................................3-51 Snow Tires ......................................................................7-42 Special Driving Conditions...........................................5-118 Hazardous Driving Conditions.................................5-118 Rocking the Vehicle..................................................5-118 Smooth Cornering ....................................................5-119 Driving at Night........................................................5-119 Driving in the Rain...................................................5-119 Driving in Flooded Areas .........................................5-120 Highway Driving......................................................5-120 Reducing the Risk of a Rollover..............................5-121 Stack cooling coolant......................................................7-16 Checking the Coolant Level.......................................7-16 Changing Coolant.......................................................7-18 Steering Wheel................................................................3-20 Horn............................................................................3-22 Heated Steering Wheel...............................................3-22 Motor Driven Power Steering (MDPS) .....................3-20 Tilt Steering/Telescope Steering.................................3-21 Storage Compartment ...................................................3-165 Center Console Storage............................................3-165 Glove Box ................................................................3-165 I Index Tires and wheels ......................................................7-29, 8-4 Tire Care.....................................................................7-29 Recommended Cold Tire Inflation Pressures.............7-30 Check Tire Inflation Pressure.....................................7-31 Tire Rotation...............................................................7-32 Wheel Alignment and Tire Balance ...........................7-33 Tire Replacement........................................................7-33 Wheel Replacement....................................................7-34 Tire Traction ...............................................................7-34 Tire Maintenance........................................................7-34 Tire Sidewall Labeling ...............................................7-34 Tire Terminology and Definitions..............................7-38 All Season Tires .........................................................7-42 Summer Tires .............................................................7-42 Snow Tires..................................................................7-42 Radial-Ply Tires..........................................................7-42 Low Aspect Ratio Tires..............................................7-43 Towing ............................................................................6-24 Towing Service...........................................................6-24 Removable Towing Hook...........................................6-25 Emergency Towing.....................................................6-26 Trailer Towing...............................................................5-131 Trip Computer.................................................................3-85 I-10 U USB Charger.................................................................3-171 V Vehicle Certification Label ...............................................8-7 Vehicle Identification Number (VIN)...............................8-7 Vehicle Load Limit .......................................................5-126 Tire Loading Information Label...............................5-126 Vehicle Stability Management (VSM)............................5-34 Volume and Weight...........................................................8-5 W Washer fluid ....................................................................7-20 Checking the Washer Fluid Level ..............................7-20 Welcome System...........................................................3-101 Windows .........................................................................3-33 Power Windows..........................................................3-34 Windshield Defrosting and Defogging .........................3-160 Auto Defogging System (Additional Feature with Automatic Temperature Control System) .....3-162 Rear Window Defroster............................................3-163 Winter Driving ..............................................................5-122 Snow or Icy Conditions............................................5-122 Winter Precautions ...................................................5-124 Wiper blades ...................................................................7-24 Blade Inspection .........................................................7-24 Blade Replacement.....................................................7-24 Wipers and Washers......................................................3-103 Front Windshield Wipers..........................................3-103 Front Windshield Washers........................................3-105 Rear Window Wiper and Washer .............................3-106 Wireless Cellular Phone Charging System...................3-171 Index I I-11 ■ PM50-EU29B (�Oi I □ I�) For clean future, Hyundai Motor Company uses environmentally friendly paper to produce owner's manual.